Newer
Older
mbed-os / targets / TARGET_ARM_FM / TARGET_FVP_MPS2 / TARGET_FVP_MPS2_M0P / device / TOOLCHAIN_GCC_ARM / MPS2.ld
/*
 * MPS2 CMSIS Library
 */
/*
 * Copyright (c) 2009-2018 ARM Limited. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * This file is derivative of CMSIS V5.00 gcc_arm.ld
 */
/* Linker script for mbed FVP Cortex-M0-Plus on MPS2 */

/* Linker script to configure memory regions. */
/* The length of the VECTORS region is a bit larger than
 * is necessary based on the number of exception handlers.
 */
MEMORY
{
  VECTORS (rx)          : ORIGIN = 0x00000000, LENGTH = 0x00000400
  FLASH (rx)            : ORIGIN = 0x00000400, LENGTH = 0x00040000 - 0x00000400
  RAM (rwx)             : ORIGIN = 0x20000000, LENGTH = 0x00020000
}

/* Linker script to place sections and symbol values. Should be used together
 * with other linker script that defines memory regions FLASH and RAM.
 * It references following symbols, which must be defined in code:
 *   Reset_Handler : Entry of reset handler
 *
 * It defines following symbols, which code can use without definition:
 *   __exidx_start
 *   __exidx_end
 *   __etext
 *   __data_start__
 *   __preinit_array_start
 *   __preinit_array_end
 *   __init_array_start
 *   __init_array_end
 *   __fini_array_start
 *   __fini_array_end
 *   __data_end__
 *   __bss_start__
 *   __bss_end__
 *   __end__
 *   end
 *   __HeapLimit
 *   __StackLimit
 *   __StackTop
 *   __stack
 */
ENTRY(Reset_Handler)

HEAP_SIZE  = 0x4000;
STACK_SIZE = 0x1000;

/* Size of the vector table in SRAM */
M_VECTOR_RAM_SIZE = 0x140;

SECTIONS
{
    .isr_vector :
    {
        __vector_table = .;
        KEEP(*(.vector_table))
         . = ALIGN(4);
    } > VECTORS

    .text :
    {
        . = ALIGN(4);
        *(.text*)

        KEEP(*(.init))
        KEEP(*(.fini))

        /* .ctors */
        *crtbegin.o(.ctors)
        *crtbegin?.o(.ctors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
        *(SORT(.ctors.*))
        *(.ctors)

        /* .dtors */
        *crtbegin.o(.dtors)
        *crtbegin?.o(.dtors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
        *(SORT(.dtors.*))
        *(.dtors)

        *(.rodata*)

        KEEP(*(.eh_frame*))
    } > FLASH

    .ARM.extab :
    {
        *(.ARM.extab* .gnu.linkonce.armextab.*)
    } > FLASH

    __exidx_start = .;
    .ARM.exidx :
    {
        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
    } > FLASH
    __exidx_end = .;

    .interrupts_ram :
    {
        . = ALIGN(4);
        __VECTOR_RAM__ = .;
        __interrupts_ram_start__ = .;   /* Create a global symbol at data start */
        . += M_VECTOR_RAM_SIZE;
        . = ALIGN(4);
        __interrupts_ram_end__ = .;     /* Define a global symbol at data end */
    } > RAM

    .data :
    {
        PROVIDE(__etext = LOADADDR(.data));
        . = ALIGN(4);
        __data_start__ = .;
        *(vtable)
        *(.data)
        *(.data*)

        . = ALIGN(4);
        /* preinit data */
        PROVIDE (__preinit_array_start = .);
        KEEP(*(.preinit_array))
        PROVIDE (__preinit_array_end = .);

        . = ALIGN(4);
        /* init data */
        PROVIDE (__init_array_start = .);
        KEEP(*(SORT(.init_array.*)))
        KEEP(*(.init_array))
        PROVIDE (__init_array_end = .);


        . = ALIGN(4);
        /* finit data */
        PROVIDE (__fini_array_start = .);
        KEEP(*(SORT(.fini_array.*)))
        KEEP(*(.fini_array))
        PROVIDE (__fini_array_end = .);

        . = ALIGN(4);
        /* All data end */
        __data_end__ = .;

    } > RAM AT > FLASH

    .uninitialized (NOLOAD):
    {
        . = ALIGN(32);
        __uninitialized_start = .;
        *(.uninitialized)
        KEEP(*(.keep.uninitialized))
        . = ALIGN(32);
        __uninitialized_end = .;
    } > RAM

    .bss :
    {
        . = ALIGN(4);
        __START_BSS = .;
        __bss_start__ = .;
        *(.bss)
        *(.bss*)
        *(COMMON)
        . = ALIGN(4);
        __bss_end__ = .;
        __END_BSS = .;

    } > RAM

    bss_size = __bss_end__ - __bss_start__;

    .heap :
    {
        . = ALIGN(8);
        __end__ = .;
        PROVIDE(end = .);
        __HeapBase = .;
        . += HEAP_SIZE;
        __HeapLimit = .;
        __heap_limit = .; /* Add for _sbrk */
    } > RAM

    /* Set stack top to end of RAM, and stack limit move down by
     * size of stack_dummy section */
    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
    __StackLimit = __StackTop - STACK_SIZE;
    PROVIDE(__stack = __StackTop);

    /* Check if data + heap + stack exceeds RAM limit */
    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")

}   /* End of sections */