GitBucket
Newer
/**
******************************************************************************
* @file stm32l4xx_hal_uart_ex.c
* @author MCD Application Team
* @brief Extended UART HAL module driver.
* This file provides firmware functions to manage the following extended
* functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
*
@verbatim
==============================================================================
##### UART peripheral extended features #####
==============================================================================
(#) Declare a UART_HandleTypeDef handle structure.
(#) For the UART RS485 Driver Enable mode, initialize the UART registers
by calling the HAL_RS485Ex_Init() API.
(#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming.
-@- When UART operates in FIFO mode, FIFO mode must be enabled prior
starting RX/TX transfers. Also RX/TX FIFO thresholds must be
configured prior starting RX/TX transfers.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"
/** @addtogroup STM32L4xx_HAL_Driver
* @{
*/
/** @defgroup UARTEx UARTEx
* @brief UART Extended HAL module driver
* @{
*/
#ifdef HAL_UART_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#if defined(USART_CR1_FIFOEN)
/** @defgroup UARTEX_Private_Constants UARTEx Private Constants
* @{
*/
/* UART RX FIFO depth */
#define RX_FIFO_DEPTH 8U
/* UART TX FIFO depth */
#define TX_FIFO_DEPTH 8U
/**
* @}
*/
#endif /* USART_CR1_FIFOEN */
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup UARTEx_Private_Functions UARTEx Private Functions
* @{
*/
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
#if defined(USART_CR1_FIFOEN)
static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart);
#endif /* USART_CR1_FIFOEN */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
* @{
*/
/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Extended Initialization and Configuration Functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
in asynchronous mode.
(+) For the asynchronous mode the parameters below can be configured:
(++) Baud Rate
(++) Word Length
(++) Stop Bit
(++) Parity: If the parity is enabled, then the MSB bit of the data written
in the data register is transmitted but is changed by the parity bit.
(++) Hardware flow control
(++) Receiver/transmitter modes
(++) Over Sampling Method
(++) One-Bit Sampling Method
(+) For the asynchronous mode, the following advanced features can be configured as well:
(++) TX and/or RX pin level inversion
(++) data logical level inversion
(++) RX and TX pins swap
(++) RX overrun detection disabling
(++) DMA disabling on RX error
(++) MSB first on communication line
(++) auto Baud rate detection
[..]
The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration
procedures (details for the procedures are available in reference manual).
@endverbatim
Depending on the frame length defined by the M1 and M0 bits (7-bit,
8-bit or 9-bit), the possible UART formats are listed in the
following table.
Table 1. UART frame format.
+-----------------------------------------------------------------------+
| M1 bit | M0 bit | PCE bit | UART frame |
|---------|---------|-----------|---------------------------------------|
| 0 | 0 | 0 | | SB | 8 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 1 | 0 | | SB | 9 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
|---------|---------|-----------|---------------------------------------|
| 1 | 0 | 0 | | SB | 7 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
+-----------------------------------------------------------------------+
* @{
*/
/**
* @brief Initialize the RS485 Driver enable feature according to the specified
* parameters in the UART_InitTypeDef and creates the associated handle.
* @param huart UART handle.
* @param Polarity Select the driver enable polarity.
* This parameter can be one of the following values:
* @arg @ref UART_DE_POLARITY_HIGH DE signal is active high
* @arg @ref UART_DE_POLARITY_LOW DE signal is active low
* @param AssertionTime Driver Enable assertion time:
* 5-bit value defining the time between the activation of the DE (Driver Enable)
* signal and the beginning of the start bit. It is expressed in sample time
* units (1/8 or 1/16 bit time, depending on the oversampling rate)
* @param DeassertionTime Driver Enable deassertion time:
* 5-bit value defining the time between the end of the last stop bit, in a
* transmitted message, and the de-activation of the DE (Driver Enable) signal.
* It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
* oversampling rate).
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
uint32_t DeassertionTime)
{
uint32_t temp;
/* Check the UART handle allocation */
if (huart == NULL)
{
return HAL_ERROR;
}
/* Check the Driver Enable UART instance */
assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
/* Check the Driver Enable polarity */
assert_param(IS_UART_DE_POLARITY(Polarity));
/* Check the Driver Enable assertion time */
assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
/* Check the Driver Enable deassertion time */
assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
if (huart->gState == HAL_UART_STATE_RESET)
{
/* Allocate lock resource and initialize it */
huart->Lock = HAL_UNLOCKED;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
UART_InitCallbacksToDefault(huart);
if (huart->MspInitCallback == NULL)
{
huart->MspInitCallback = HAL_UART_MspInit;
}
/* Init the low level hardware */
huart->MspInitCallback(huart);
#else
/* Init the low level hardware : GPIO, CLOCK, CORTEX */
HAL_UART_MspInit(huart);
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the UART Communication parameters */
if (UART_SetConfig(huart) == HAL_ERROR)
{
return HAL_ERROR;
}
if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
{
UART_AdvFeatureConfig(huart);
}
/* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
/* Set the Driver Enable polarity */
MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
/* Set the Driver Enable assertion and deassertion times */
temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp);
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
return (UART_CheckIdleState(huart));
}
/**
* @}
*/
/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions
* @brief Extended functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
This subsection provides a set of Wakeup and FIFO mode related callback functions.
(#) Wakeup from Stop mode Callback:
(+) HAL_UARTEx_WakeupCallback()
(#) TX/RX Fifos Callbacks:
(+) HAL_UARTEx_RxFifoFullCallback()
(+) HAL_UARTEx_TxFifoEmptyCallback()
@endverbatim
* @{
*/
/**
* @brief UART wakeup from Stop mode callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_WakeupCallback can be implemented in the user file.
*/
}
#if defined(USART_CR1_FIFOEN)
/**
* @brief UART RX Fifo full callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file.
*/
}
/**
* @brief UART TX Fifo empty callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file.
*/
}
#endif /* USART_CR1_FIFOEN */
/**
* @}
*/
/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions
* @brief Extended Peripheral Control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides the following functions:
(+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode
(+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality
(+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
detection length to more than 4 bits for multiprocessor address mark wake up.
(+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode
trigger: address match, Start Bit detection or RXNE bit status.
(+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode
(+) HAL_UARTEx_DisableStopMode() API disables the above functionality
(+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode
(+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode
(+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold
(+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold
@endverbatim
* @{
*/
#if defined(USART_CR3_UCESM)
/**
* @brief Keep UART Clock enabled when in Stop Mode.
* @note When the USART clock source is configured to be LSE or HSI, it is possible to keep enabled
* this clock during STOP mode by setting the UCESM bit in USART_CR3 control register.
* @note When LPUART is used to wakeup from stop with LSE is selected as LPUART clock source,
* and desired baud rate is 9600 baud, the bit UCESM bit in LPUART_CR3 control register must be set.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Set UCESM bit */
SET_BIT(huart->Instance->CR3, USART_CR3_UCESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Disable UART Clock when in Stop Mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Clear UCESM bit */
CLEAR_BIT(huart->Instance->CR3, USART_CR3_UCESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
#endif /* USART_CR3_UCESM */
/**
* @brief By default in multiprocessor mode, when the wake up method is set
* to address mark, the UART handles only 4-bit long addresses detection;
* this API allows to enable longer addresses detection (6-, 7- or 8-bit
* long).
* @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
* 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
* @param huart UART handle.
* @param AddressLength This parameter can be one of the following values:
* @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address
* @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
{
/* Check the UART handle allocation */
if (huart == NULL)
{
return HAL_ERROR;
}
/* Check the address length parameter */
assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the address length */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* TEACK and/or REACK to check before moving huart->gState to Ready */
return (UART_CheckIdleState(huart));
}
/**
* @brief Set Wakeup from Stop mode interrupt flag selection.
* @note It is the application responsibility to enable the interrupt used as
* usart_wkup interrupt source before entering low-power mode.
* @param huart UART handle.
* @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status.
* This parameter can be one of the following values:
* @arg @ref UART_WAKEUP_ON_ADDRESS
* @arg @ref UART_WAKEUP_ON_STARTBIT
* @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
{
HAL_StatusTypeDef status = HAL_OK;
uint32_t tickstart;
/* check the wake-up from stop mode UART instance */
assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
/* check the wake-up selection parameter */
assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the wake-up selection scheme */
MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
{
UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection);
}
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* Init tickstart for timeout managment*/
tickstart = HAL_GetTick();
/* Wait until REACK flag is set */
if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
{
status = HAL_TIMEOUT;
}
else
{
/* Initialize the UART State */
huart->gState = HAL_UART_STATE_READY;
}
/* Process Unlocked */
__HAL_UNLOCK(huart);
return status;
}
/**
* @brief Enable UART Stop Mode.
* @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Set UESM bit */
SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Disable UART Stop Mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Clear UESM bit */
CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
#if defined(USART_CR1_FIFOEN)
/**
* @brief Enable the FIFO mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Enable FIFO mode */
SET_BIT(tmpcr1, USART_CR1_FIFOEN);
huart->FifoMode = UART_FIFOMODE_ENABLE;
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Disable the FIFO mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Enable FIFO mode */
CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN);
huart->FifoMode = UART_FIFOMODE_DISABLE;
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Set the TXFIFO threshold.
* @param huart UART handle.
* @param Threshold TX FIFO threshold value
* This parameter can be one of the following values:
* @arg @ref UART_TXFIFO_THRESHOLD_1_8
* @arg @ref UART_TXFIFO_THRESHOLD_1_4
* @arg @ref UART_TXFIFO_THRESHOLD_1_2
* @arg @ref UART_TXFIFO_THRESHOLD_3_4
* @arg @ref UART_TXFIFO_THRESHOLD_7_8
* @arg @ref UART_TXFIFO_THRESHOLD_8_8
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Update TX threshold configuration */
MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Set the RXFIFO threshold.
* @param huart UART handle.
* @param Threshold RX FIFO threshold value
* This parameter can be one of the following values:
* @arg @ref UART_RXFIFO_THRESHOLD_1_8
* @arg @ref UART_RXFIFO_THRESHOLD_1_4
* @arg @ref UART_RXFIFO_THRESHOLD_1_2
* @arg @ref UART_RXFIFO_THRESHOLD_3_4
* @arg @ref UART_RXFIFO_THRESHOLD_7_8
* @arg @ref UART_RXFIFO_THRESHOLD_8_8
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold)
{
uint32_t tmpcr1;
/* Check the parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Update RX threshold configuration */
MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
#endif /* USART_CR1_FIFOEN */
/**
* @}
*/
/**
* @}
*/
/** @addtogroup UARTEx_Private_Functions
* @{
*/
/**
* @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection.
* @param huart UART handle.
* @param WakeUpSelection UART wake up from stop mode parameters.
* @retval None
*/
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
{
assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
/* Set the USART address length */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
/* Set the USART address node */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
}
#if defined(USART_CR1_FIFOEN)
/**
* @brief Calculate the number of data to process in RX/TX ISR.
* @note The RX FIFO depth and the TX FIFO depth is extracted from
* the UART configuration registers.
* @param huart UART handle.
* @retval None
*/
static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart)
{
uint8_t rx_fifo_depth;
uint8_t tx_fifo_depth;
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (huart->FifoMode == UART_FIFOMODE_DISABLE)
{
huart->NbTxDataToProcess = 1U;
huart->NbRxDataToProcess = 1U;
}
else
{
rx_fifo_depth = RX_FIFO_DEPTH;
tx_fifo_depth = TX_FIFO_DEPTH;
rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos);
tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos);
huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold];
huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold];
}
}
#endif /* USART_CR1_FIFOEN */
/**
* @}
*/
#endif /* HAL_UART_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/