Newer
Older
mbed-os / connectivity / drivers / emac / TARGET_ARM_SSG / COMPONENT_SMSC9220 / smsc9220_emac.h
/*
 * Copyright (c) 2018 Arm Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef SMSC9220_EMAC_H_
#define SMSC9220_EMAC_H_

#include "EMAC.h"
#include "mbed.h"
#include "rtos/Mutex.h"

#include "smsc9220_emac_config.h"

class SMSC9220_EMAC : public EMAC {
public:
    SMSC9220_EMAC();

    static SMSC9220_EMAC &get_instance();

    /**
     * Return maximum transmission unit
     *
     * @return     MTU in bytes
     */
    virtual uint32_t get_mtu_size() const;

    /**
     * Gets memory buffer alignment preference
     *
     * Gets preferred memory buffer alignment of the Emac device. IP stack may
     * or may not align link out memory buffer chains using the alignment.
     *
     * @return         Memory alignment requirement in bytes
     */
    virtual uint32_t get_align_preference() const;

    /**
     * Return interface name
     *
     * @param name Pointer to where the name should be written
     * @param size Maximum number of character to copy
     */
    virtual void get_ifname(char *name, uint8_t size) const;

    /**
     * Returns size of the underlying interface HW address size.
     *
     * @return     HW address size in bytes
     */
    virtual uint8_t get_hwaddr_size() const;

    /**
     * Return interface-supplied HW address
     *
     * Copies HW address to provided memory, @param addr has to be of correct
     * size see @a get_hwaddr_size
     *
     * HW address need not be provided if this interface does not have its own
     * HW address configuration; stack will choose address from central system
     * configuration if the function returns false and does not write to addr.
     *
     * @param addr HW address for underlying interface
     * @return     true if HW address is available
     */
    virtual bool get_hwaddr(uint8_t *addr) const;

    /**
     * Set HW address for interface
     *
     * Provided address has to be of correct size, see @a get_hwaddr_size
     *
     * Called to set the MAC address to actually use - if @a get_hwaddr is
     * provided the stack would normally use that, but it could be overridden,
     * eg for test purposes.
     *
     * @param addr Address to be set
     */
    virtual void set_hwaddr(const uint8_t *addr);

    /**
     * Sends the packet over the link
     *
     * That can not be called from an interrupt context.
     *
     * @param buf  Packet to be send
     * @return     True if the packet was send successfully, False otherwise
     */
    virtual bool link_out(emac_mem_buf_t *buf);

    /**
     * Initializes the HW
     *
     * @return True on success, False in case of an error.
     */
    virtual bool power_up();

    /**
     * Deinitializes the HW
     *
     */
    virtual void power_down();

    /**
     * Sets a callback that needs to be called for packets received for that
     * interface
     *
     * @param input_cb Function to be register as a callback
     */
    virtual void set_link_input_cb(emac_link_input_cb_t input_cb);

    /**
     * Sets a callback that needs to be called on link status changes for given
     * interface
     *
     * @param state_cb Function to be register as a callback
     */
    virtual void set_link_state_cb(emac_link_state_change_cb_t state_cb);

    /** Add device to a multicast group
     *
     * @param address  A multicast group hardware address
     */
    virtual void add_multicast_group(const uint8_t *address);

    /** Remove device from a multicast group
     *
     * @param address  A multicast group hardware address
     */
    virtual void remove_multicast_group(const uint8_t *address);

    /** Request reception of all multicast packets
     *
     * @param all True to receive all multicasts
     *            False to receive only multicasts addressed to specified groups
     */
    virtual void set_all_multicast(bool all);

    /** Sets memory manager that is used to handle memory buffers
     *
     * @param mem_mngr Pointer to memory manager
     */
    virtual void set_memory_manager(EMACMemoryManager &mem_mngr);

    void rx_isr();

    static const struct smsc9220_eth_dev_t *dev;

private:
    void packet_rx();
    void link_status_task();
    bool low_level_init_successful();
    emac_mem_buf_t *low_level_input();
    static void receiver_thread_function(void* params);

    rtos::Mutex _TXLockMutex;
    rtos::Mutex _RXLockMutex;
    bool _prev_link_status_up;
    int _link_status_task_handle;
    uint8_t _hwaddr[SMSC9220_HWADDR_SIZE];

    Thread receiver_thread;
    EMACMemoryManager *_memory_manager;
    emac_link_input_cb_t _emac_link_input_cb;
    emac_link_state_change_cb_t _emac_link_state_cb;

};

#endif /* SMSC9220_EMAC_H_ */