GitBucket
Newer
/**
******************************************************************************
* @file stm32u5xx_hal_rtc_ex.h
* @author MCD Application Team
* @brief Header file of RTC HAL Extended module.
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32U5xx_HAL_RTC_EX_H
#define STM32U5xx_HAL_RTC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32u5xx_hal_def.h"
/** @addtogroup STM32U5xx_HAL_Driver
* @{
*/
/** @defgroup RTCEx RTCEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
* @{
*/
/** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition
* @{
*/
typedef struct
{
uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins */
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger */
uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */
uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */
uint32_t Filter; /*!< Specifies the TAMP Filter Tamper.
This parameter can be a value of @ref RTCEx_Tamper_Filter */
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
This parameter can be a value of
@ref RTCEx_Tamper_Sampling_Frequencies */
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
This parameter can be a value of
@ref RTCEx_Tamper_Pin_Precharge_Duration */
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP */
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
This parameter can be a value of
@ref RTCEx_Tamper_TimeStampOnTamperDetection */
} RTC_TamperTypeDef;
/**
* @}
*/
/** @defgroup RTCEx_Active_Seed_Size Seed size Definitions
* @{
*/
#define RTC_ATAMP_SEED_NB_UINT32 4U
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_structures_definition RTCEx Active Tamper structures definitions
* @{
*/
typedef struct
{
uint32_t Enable; /*!< Specifies the Tamper input is active.
This parameter can be a value of @ref RTCEx_ActiveTamper_Enable */
uint32_t Interrupt; /*!< Specifies the interrupt mode
This parameter can be a value of @ref RTCEx_ActiveTamper_Interrupt */
uint32_t Output; /*!< Specifies the TAMP output to be compared with.
The same output can be used for several tamper inputs.
This parameter can be a value of @ref RTCEx_ActiveTamper_Sel */
uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */
uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */
} RTC_ATampInputTypeDef;
typedef struct
{
uint32_t ActiveFilter; /*!< Specifies the Active tamper filter enable.
This parameter can be a value of @ref RTCEx_ActiveTamper_Filter */
uint32_t ActiveAsyncPrescaler; /*!< Specifies the Active Tamper asynchronous Prescaler clock.
This parameter can be a value of
@ref RTCEx_ActiveTamper_Async_prescaler */
uint32_t TimeStampOnTamperDetection; /*!< Specifies the timeStamp on tamper detection.
This parameter can be a value of
@ref RTCEx_Tamper_TimeStampOnTamperDetection */
uint32_t ActiveOutputChangePeriod; /*!< Specifies the Active Tamper output change period .
This parameter can be a value from 0 to 7. */
uint32_t Seed[RTC_ATAMP_SEED_NB_UINT32];
/*!< Specifies the RNG Seed value.
This parameter is an array of value from 0 to 0xFFFFFFFF. */
RTC_ATampInputTypeDef TampInput[RTC_TAMP_NB];
/*!< Specifies configuration of all active tampers.
The index of TampInput[RTC_TAMP_NB] can be a value of RTCEx_ActiveTamper_Sel */
} RTC_ActiveTampersTypeDef;
/**
* @}
*/
/** @defgroup RTCEx_Internal_Tamper_structure_definition RTCEx Internal Tamper structure definition
* @{
*/
typedef struct
{
uint32_t IntTamper; /*!< Specifies the Internal Tamper Pin.
This parameter can be a value of @ref RTCEx_Internal_Tamper_Pins */
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
This parameter can be a value of
@ref RTCEx_Tamper_TimeStampOnTamperDetection */
uint32_t NoErase; /*!< Specifies the internal Tamper no erase mode.
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */
} RTC_InternalTamperTypeDef;
/**
* @}
*/
/** @defgroup RTCEx_Secure_State_structure_definition RTCEx Secure structure definition
* @{
*/
typedef struct
{
uint32_t rtcSecureFull; /*!< Specifies If the RTC is fully secure or not
This parameter can be a value of @ref RTCEx_RTC_Secure_Full */
uint32_t rtcNonSecureFeatures; /*!< Specifies the non-secure features.
This parameter is only relevant if RTC is not fully secure
(rtcSecureFull == RTC_SECURE_FULL_NO).
This parameter can be a combination of
@ref RTCEx_RTC_NonSecure_Features. */
uint32_t tampSecureFull; /*!< Specifies If the TAMP is fully secure or not execpt monotonic counters
and BackUp registers.
This parameter can be a value of @ref RTCEx_TAMP_Secure_Full */
uint32_t backupRegisterStartZone2; /*!< Specifies the backup register start zone 2
Zone 1 : read secure write secure.
Zone 2 : read non-secure write secure.
This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to specify
the register.
Warning : this parameter is shared with RTC_PrivilegeStateTypeDef. */
uint32_t backupRegisterStartZone3; /*!< Specifies the backup register start zone 3
Zone 3 : read non-secure write non-secure
This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to
specify the register.
Warning : this parameter is shared with RTC_PrivilegeStateTypeDef. */
uint32_t MonotonicCounterSecure; /*!< Specifies If the monotonic counter is secure or not
This parameter can be a value of
@ref RTCEx_TAMP_Monotonic_Counter_Secure */
} RTC_SecureStateTypeDef;
/**
* @}
*/
/** @defgroup RTCEx_Privilege_State_structure_definition RTCEx Privilege structure definition
* @{
*/
typedef struct
{
uint32_t rtcPrivilegeFull; /*!< Specifies If the RTC is fully privileged or not.
This parameter can be a value of @ref RTCEx_RTC_Privilege_Full. */
uint32_t rtcPrivilegeFeatures; /*!< Specifies the privileged features.
This parameter is only relevant if RTC is not fully privileged
(rtcPrivilegeFull == RTC_PRIVILEGE_FULL_NO).
This parameter can be a combination of
@ref RTCEx_RTC_Privilege_Features. */
uint32_t tampPrivilegeFull; /*!< Specifies If the TAMP is fully privileged or not execpt monotonic
counters and BackUp registers.
This parameter can be a value of @ref RTCEx_TAMP_Privilege_Full. */
uint32_t backupRegisterPrivZone; /*!< Specifies backup register zone to be privileged.
This parameter can be a combination of
@ref RTCEx_Backup_Reg_Privilege_zone.
Warning : this parameter is writable in secure mode or if trustzone is
disabled. */
uint32_t backupRegisterStartZone2; /*!< Specifies the backup register start zone 2.
Zone 1 : read secure write secure.
Zone 2 : read non-secure write secure.
This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to specify
the register .
Warning : this parameter is writable in secure mode or if trustzone is
disabled.
Warning : this parameter is shared with RTC_SecureStateTypeDef */
uint32_t backupRegisterStartZone3; /*!< Specifies the backup register start zone 3.
Zone 3 : read non-secure write non-secure.
This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to specify
the register.
Warning : this parameter is writable in secure mode or if trustzone is
disabled.
Warning : this parameter is shared with RTC_SecureStateTypeDef. */
uint32_t MonotonicCounterPrivilege; /*!< Specifies If the monotonic counter is privileged or not
This parameter can be a value of
@ref RTCEx_TAMP_Monotonic_Counter_Privilege */
} RTC_PrivilegeStateTypeDef;
/**
* @}
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
* @{
*/
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
*/
#define RTC_TIMESTAMPEDGE_RISING 0x00000000u
#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE
/**
* @}
*/
/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
* @{
*/
#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u
/**
* @}
*/
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions
* @{
*/
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000u
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1)
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2)
/**
* @}
*/
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions
* @{
*/
#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 32s, else 2exp20 RTCCLK pulses */
#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 16s, else 2exp19 RTCCLK pulses */
#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 8s, else 2exp18 RTCCLK pulses */
/**
* @}
*/
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions
* @{
*/
#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added
during a X -second window = Y - CALM[8:0]
with Y = 512, 256, 128 when X = 32, 16, 8 */
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited
during a 32-second window = CALM[8:0] */
/**
* @}
*/
/** @defgroup RTCEx_Smooth_calib_low_power_Definitions RTCEx Smooth calib Low Power Definitions
* @{
*/
#define RTC_LPCAL_SET RTC_CALR_LPCAL /*!< Calibration window is 220 ck_apre,
which is the required configuration for
ultra-low consumption mode. */
#define RTC_LPCAL_RESET 0x00000000u /*!< Calibration window is 220 RTCCLK,
which is a high-consumption mode.
This mode should be set only when less
than 32s calibration window is required. */
/**
* @}
*/
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
* @{
*/
#define RTC_CALIBOUTPUT_512HZ 0x00000000u
#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL
/**
* @}
*/
/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions
* @{
*/
#define RTC_SHIFTADD1S_RESET 0x00000000u
#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pins RTCEx Tamper Pins Definition
* @{
*/
#define RTC_TAMPER_1 TAMP_CR1_TAMP1E
#define RTC_TAMPER_2 TAMP_CR1_TAMP2E
#if (RTC_TAMP_NB == 3)
#define RTC_TAMPER_3 TAMP_CR1_TAMP3E
#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2 | RTC_TAMPER_3 )
#elif (RTC_TAMP_NB == 8)
#define RTC_TAMPER_3 TAMP_CR1_TAMP3E
#define RTC_TAMPER_4 TAMP_CR1_TAMP4E
#define RTC_TAMPER_5 TAMP_CR1_TAMP5E
#define RTC_TAMPER_6 TAMP_CR1_TAMP6E
#define RTC_TAMPER_7 TAMP_CR1_TAMP7E
#define RTC_TAMPER_8 TAMP_CR1_TAMP8E
#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2 |\
RTC_TAMPER_3 | RTC_TAMPER_4 |\
RTC_TAMPER_5 | RTC_TAMPER_6 |\
RTC_TAMPER_7 | RTC_TAMPER_8 )
#else
#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2)
#endif /* RTC_TAMP_NB */
/**
* @}
*/
/** @defgroup RTCEx_Internal_Tamper_Pins RTCEx Internal Tamper Pins Definition
* @{
*/
#define RTC_INT_TAMPER_1 TAMP_CR1_ITAMP1E
#define RTC_INT_TAMPER_2 TAMP_CR1_ITAMP2E
#define RTC_INT_TAMPER_3 TAMP_CR1_ITAMP3E
#define RTC_INT_TAMPER_5 TAMP_CR1_ITAMP5E
#define RTC_INT_TAMPER_6 TAMP_CR1_ITAMP6E
#define RTC_INT_TAMPER_7 TAMP_CR1_ITAMP7E
#define RTC_INT_TAMPER_8 TAMP_CR1_ITAMP8E
#define RTC_INT_TAMPER_9 TAMP_CR1_ITAMP9E
#define RTC_INT_TAMPER_11 TAMP_CR1_ITAMP11E
#define RTC_INT_TAMPER_12 TAMP_CR1_ITAMP12E
#define RTC_INT_TAMPER_13 TAMP_CR1_ITAMP13E
#define RTC_INT_TAMPER_ALL (RTC_INT_TAMPER_1 | RTC_INT_TAMPER_2 |\
RTC_INT_TAMPER_3 | RTC_INT_TAMPER_5 |\
RTC_INT_TAMPER_6 | RTC_INT_TAMPER_7 |\
RTC_INT_TAMPER_8 | RTC_INT_TAMPER_9 |\
RTC_INT_TAMPER_11|RTC_INT_TAMPER_12|\
RTC_INT_TAMPER_13)
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Trigger RTCEx Tamper Trigger
* @{
*/
#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */
#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */
#define RTC_TAMPERTRIGGER_LOWLEVEL 0x02u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */
#define RTC_TAMPERTRIGGER_HIGHLEVEL 0x03u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_MaskFlag RTCEx Tamper MaskFlag
* @{
*/
#define RTC_TAMPERMASK_FLAG_DISABLE 0x00u
#define RTC_TAMPERMASK_FLAG_ENABLE 0x01u
/**
* @}
*/
/** @defgroup RTCEx_Tamper_EraseBackUp RTCEx Tamper EraseBackUp
* @{
*/
#define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00u
#define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01u
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Filter RTCEx Tamper Filter
* @{
*/
#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */
#define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2
consecutive samples at the active level */
#define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4
consecutive samples at the active level */
#define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8
consecutive samples at the active level */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Sampling_Frequencies RTCEx Tamper Sampling Frequencies
* @{
*/
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1 | \
TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration RTCEx Tamper Pin Precharge Duration
* @{
*/
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (TAMP_FLTCR_TAMPPRCH_0 | TAMP_FLTCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pull_UP RTCEx Tamper Pull UP
* @{
*/
#define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< Tamper pins are pre-charged before sampling */
#define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection RTCEx Tamper TimeStamp On Tamper Detection Definitions
* @{
*/
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */
/**
* @}
*/
/** @defgroup RTCEx_Internal_Tamper_Interrupt RTCEx Internal Tamper Interrupt
* @{
*/
#define RTC_IT_TAMP_1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */
#define RTC_IT_TAMP_2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */
#define RTC_IT_TAMP_3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */
#define RTC_IT_TAMP_4 TAMP_IER_TAMP4IE /*!< Tamper 4 Interrupt */
#define RTC_IT_TAMP_5 TAMP_IER_TAMP5IE /*!< Tamper 5 Interrupt */
#define RTC_IT_TAMP_6 TAMP_IER_TAMP6IE /*!< Tamper 6 Interrupt */
#define RTC_IT_TAMP_7 TAMP_IER_TAMP7IE /*!< Tamper 7 Interrupt */
#define RTC_IT_TAMP_8 TAMP_IER_TAMP8IE /*!< Tamper 8 Interrupt */
#define RTC_IT_TAMP_ALL (RTC_IT_TAMP_1 | RTC_IT_TAMP_2 |\
RTC_IT_TAMP_3 | RTC_IT_TAMP_4 |\
RTC_IT_TAMP_5 | RTC_IT_TAMP_6 |\
RTC_IT_TAMP_7 | RTC_IT_TAMP_8 )
#define RTC_IT_INT_TAMP_1 TAMP_IER_ITAMP1IE /*!< Tamper 1 internal Interrupt */
#define RTC_IT_INT_TAMP_2 TAMP_IER_ITAMP2IE /*!< Tamper 2 internal Interrupt */
#define RTC_IT_INT_TAMP_3 TAMP_IER_ITAMP3IE /*!< Tamper 3 internal Interrupt */
#define RTC_IT_INT_TAMP_5 TAMP_IER_ITAMP5IE /*!< Tamper 5 internal Interrupt */
#define RTC_IT_INT_TAMP_6 TAMP_IER_ITAMP6IE /*!< Tamper 6 internal Interrupt */
#define RTC_IT_INT_TAMP_7 TAMP_IER_ITAMP7IE /*!< Tamper 7 internal Interrupt */
#define RTC_IT_INT_TAMP_8 TAMP_IER_ITAMP8IE /*!< Tamper 8 internal Interrupt */
#define RTC_IT_INT_TAMP_9 TAMP_IER_ITAMP9IE /*!< Tamper 9 internal Interrupt */
#define RTC_IT_INT_TAMP_11 TAMP_IER_ITAMP11IE /*!< Tamper 11 internal Interrupt */
#define RTC_IT_INT_TAMP_12 TAMP_IER_ITAMP9IE /*!< Tamper 12 internal Interrupt */
#define RTC_IT_INT_TAMP_13 TAMP_IER_ITAMP11IE /*!< Tamper 13 internal Interrupt */
#define RTC_IT_INT_TAMP_ALL (RTC_IT_INT_TAMP_1 | RTC_IT_INT_TAMP_2 |\
RTC_IT_INT_TAMP_3 | RTC_IT_INT_TAMP_5 |\
RTC_IT_INT_TAMP_6 | RTC_IT_INT_TAMP_7 |\
RTC_IT_INT_TAMP_8 | RTC_IT_INT_TAMP_9 |\
RTC_IT_INT_TAMP_11| RTC_IT_INT_TAMP_12|\
RTC_IT_INT_TAMP_13)
/**
* @}
*/
/** @defgroup RTCEx_Flags RTCEx Flags
* @{
*/
#define RTC_FLAG_TAMP_1 TAMP_SR_TAMP1F
#define RTC_FLAG_TAMP_2 TAMP_SR_TAMP2F
#define RTC_FLAG_TAMP_3 TAMP_SR_TAMP3F
#define RTC_FLAG_TAMP_4 TAMP_SR_TAMP4F
#define RTC_FLAG_TAMP_5 TAMP_SR_TAMP5F
#define RTC_FLAG_TAMP_6 TAMP_SR_TAMP6F
#define RTC_FLAG_TAMP_7 TAMP_SR_TAMP7F
#define RTC_FLAG_TAMP_8 TAMP_SR_TAMP8F
#define RTC_FLAG_TAMP_ALL (RTC_FLAG_TAMP_1 | RTC_FLAG_TAMP_2 | RTC_FLAG_TAMP_3 |\
RTC_FLAG_TAMP_4 | RTC_FLAG_TAMP_5 | RTC_FLAG_TAMP_6 |\
RTC_FLAG_TAMP_7 | RTC_FLAG_TAMP_8)
#define RTC_FLAG_INT_TAMP_1 TAMP_SR_ITAMP1F
#define RTC_FLAG_INT_TAMP_2 TAMP_SR_ITAMP2F
#define RTC_FLAG_INT_TAMP_3 TAMP_SR_ITAMP3F
#define RTC_FLAG_INT_TAMP_5 TAMP_SR_ITAMP5F
#define RTC_FLAG_INT_TAMP_6 TAMP_SR_ITAMP6F
#define RTC_FLAG_INT_TAMP_7 TAMP_SR_ITAMP7F
#define RTC_FLAG_INT_TAMP_8 TAMP_SR_ITAMP8F
#define RTC_FLAG_INT_TAMP_9 TAMP_SR_ITAMP9F
#define RTC_FLAG_INT_TAMP_11 TAMP_SR_ITAMP11F
#define RTC_FLAG_INT_TAMP_12 TAMP_SR_ITAMP12F
#define RTC_FLAG_INT_TAMP_13 TAMP_SR_ITAMP13F
#define RTC_FLAG_INT_TAMP_ALL (RTC_FLAG_INT_TAMP_1 | RTC_FLAG_INT_TAMP2 |\
RTC_FLAG_INT_TAMP_3 | RTC_FLAG_INT_TAMP5 |\
RTC_FLAG_INT_TAMP_6 | RTC_FLAG_INT_TAMP7 |\
RTC_FLAG_INT_TAMP_8 | RTC_FLAG_INT_TAMP9 |\
RTC_FLAG_INT_TAMP_11|RTC_FLAG_INT_TAMP_12|\
RTC_FLAG_INT_TAMP_13)
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_Enable RTCEx_ActiveTamper_Enable Definitions
* @{
*/
#define RTC_ATAMP_ENABLE 1u
#define RTC_ATAMP_DISABLE 0u
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_Interrupt RTCEx_ActiveTamper_Interrupt Definitions
* @{
*/
#define RTC_ATAMP_INTERRUPT_ENABLE 1u
#define RTC_ATAMP_INTERRUPT_DISABLE 0u
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_Filter RTCEx_ActiveTamper_Filter Definitions
* @{
*/
#define RTC_ATAMP_FILTER_ENABLE TAMP_ATCR1_FLTEN
#define RTC_ATAMP_FILTER_DISABLE 0u
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_Async_prescaler RTCEx Active_Tamper_Asynchronous_Prescaler clock Definitions
* @{
*/
#define RTC_ATAMP_ASYNCPRES_RTCCLK 0u /*!< RTCCLK */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_2 TAMP_ATCR1_ATCKSEL_0 /*!< RTCCLK/2 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_4 TAMP_ATCR1_ATCKSEL_1 /*!< RTCCLK/4 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_8 (TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/8 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_16 TAMP_ATCR1_ATCKSEL_2 /*!< RTCCLK/16 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_32 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/32 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_64 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1) /*!< RTCCLK/64 */
#define RTC_ATAMP_ASYNCPRES_RTCCLK_128 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/128 */
/**
* @}
*/
/** @defgroup RTCEx_ActiveTamper_Sel RTCEx Active Tamper selection Definition
* @{
*/
#define RTC_ATAMP_1 0u /*!< Tamper 1 */
#define RTC_ATAMP_2 1u /*!< Tamper 2 */
#define RTC_ATAMP_3 2u /*!< Tamper 3 */
#define RTC_ATAMP_4 3u /*!< Tamper 4 */
#define RTC_ATAMP_5 4u /*!< Tamper 5 */
#define RTC_ATAMP_6 5u /*!< Tamper 6 */
#define RTC_ATAMP_7 6u /*!< Tamper 7 */
#define RTC_ATAMP_8 7u /*!< Tamper 8 */
/**
* @}
*/
/** @defgroup RTCEx_MonotonicCounter_Instance RTCEx Monotonic Counter Instance Definition
* @{
*/
#define RTC_MONOTONIC_COUNTER_1 0u /*!< Monotonic counter 1 */
/**
* @}
*/
/** @defgroup RTCEx_Backup_Registers RTCEx Backup Registers Definition
* @{
*/
#define RTC_BKP_NUMBER RTC_BKP_NB
#define RTC_BKP_DR0 0x00u
#define RTC_BKP_DR1 0x01u
#define RTC_BKP_DR2 0x02u
#define RTC_BKP_DR3 0x03u
#define RTC_BKP_DR4 0x04u
#define RTC_BKP_DR5 0x05u
#define RTC_BKP_DR6 0x06u
#define RTC_BKP_DR7 0x07u
#define RTC_BKP_DR8 0x08u
#define RTC_BKP_DR9 0x09u
#define RTC_BKP_DR10 0x0Au
#define RTC_BKP_DR11 0x0Bu
#define RTC_BKP_DR12 0x0Cu
#define RTC_BKP_DR13 0x0Du
#define RTC_BKP_DR14 0x0Eu
#define RTC_BKP_DR15 0x0Fu
#define RTC_BKP_DR16 0x10u
#define RTC_BKP_DR17 0x11u
#define RTC_BKP_DR18 0x12u
#define RTC_BKP_DR19 0x13u
#define RTC_BKP_DR20 0x14u
#define RTC_BKP_DR21 0x15u
#define RTC_BKP_DR22 0x16u
#define RTC_BKP_DR23 0x17u
#define RTC_BKP_DR24 0x18u
#define RTC_BKP_DR25 0x19u
#define RTC_BKP_DR26 0x1Au
#define RTC_BKP_DR27 0x1Bu
#define RTC_BKP_DR28 0x1Cu
#define RTC_BKP_DR29 0x1Du
#define RTC_BKP_DR30 0x1Eu
#define RTC_BKP_DR31 0x1Fu
/**
* @}
*/
/** @defgroup RTCEx_Binary_Mode RTC Binary Mode (32-bit free-running counter configuration).
* Warning : It Should not be confused with the Binary format @ref RTC_Input_parameter_format_definitions.
* @{
*/
#define RTC_BINARY_NONE 0x00000000u /*!< Free running BCD calendar mode (Binary mode disabled). */
#define RTC_BINARY_ONLY RTC_ICSR_BIN_0 /*!< Free running Binary mode (BCD mode disabled) */
#define RTC_BINARY_MIX RTC_ICSR_BIN_1 /*!< Free running BCD calendar and Binary modes */
/**
* @}
*/
/** @defgroup RTCEx_Binary_mix_BCDU If Binary mode is RTC_BINARY_MIX, the BCD calendar second is incremented
* using the SSR Least Significant Bits.
* @{
*/
#define RTC_BINARY_MIX_BCDU_0 0x00000000u /*!< The 1s BCD calendar increment is generated each time SS[7:0] = 0 */
#define RTC_BINARY_MIX_BCDU_1 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[8:0] = 0 */
#define RTC_BINARY_MIX_BCDU_2 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[9:0] = 0 */
#define RTC_BINARY_MIX_BCDU_3 (0x3UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[10:0] = 0 */
#define RTC_BINARY_MIX_BCDU_4 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[11:0] = 0 */
#define RTC_BINARY_MIX_BCDU_5 (0x5UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[12:0] = 0 */
#define RTC_BINARY_MIX_BCDU_6 (0x6UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[13:0] = 0 */
#define RTC_BINARY_MIX_BCDU_7 (0x7UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[14:0] = 0 */
/**
* @}
*/
/** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Masks_Definitions RTC Alarm Sub Seconds with binary mode Masks Definitions
* @{
*/
#define RTC_ALARMSUBSECONDBINMASK_ALL 0x00000000u /*!< All Alarm SS fields are masked.There is no comparison on sub seconds for Alarm */
#define RTC_ALARMSUBSECONDBINMASK_SS31_1 (1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:1] are don't care in Alarm comparison. Only SS[0] is compared. */
#define RTC_ALARMSUBSECONDBINMASK_SS31_2 (2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:2] are don't care in Alarm comparison. Only SS[1:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_3 (3UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:3] are don't care in Alarm comparison. Only SS[2:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_4 (4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:4] are don't care in Alarm comparison. Only SS[3:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_5 (5UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:5] are don't care in Alarm comparison. Only SS[4:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_6 (6UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:6] are don't care in Alarm comparison. Only SS[5:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_7 (7UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:7] are don't care in Alarm comparison. Only SS[6:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_8 (8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:8] are don't care in Alarm comparison. Only SS[7:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_9 (9UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:9] are don't care in Alarm comparison. Only SS[8:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_10 (10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:10] are don't care in Alarm comparison. Only SS[9:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_11 (11UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:11] are don't care in Alarm comparison. Only SS[10:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_12 (12UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:12] are don't care in Alarm comparison.Only SS[11:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_13 (13UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:13] are don't care in Alarm comparison. Only SS[12:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_14 (14UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:14] are don't care in Alarm comparison. Only SS[13:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_15 (15UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:15] are don't care in Alarm comparison. Only SS[14:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_16 (16UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:16] are don't care in Alarm comparison. Only SS[15:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_17 (17UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:17] are don't care in Alarm comparison. Only SS[16:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_18 (18UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:18] are don't care in Alarm comparison. Only SS[17:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_19 (19UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:19] are don't care in Alarm comparison. Only SS[18:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_20 (20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:20] are don't care in Alarm comparison. Only SS[19:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_21 (21UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:21] are don't care in Alarm comparison. Only SS[20:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_22 (22UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:22] are don't care in Alarm comparison. Only SS[21:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_23 (23UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:23] are don't care in Alarm comparison. Only SS[22:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_24 (24UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:24] are don't care in Alarm comparison. Only SS[23:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_25 (25UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:25] are don't care in Alarm comparison. Only SS[24:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_26 (26UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:26] are don't care in Alarm comparison. Only SS[25:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_27 (27UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:27] are don't care in Alarm comparison. Only SS[26:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_28 (28UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:28] are don't care in Alarm comparison. Only SS[27:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_29 (29UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:29] are don't care in Alarm comparison. Only SS[28:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31_30 (30UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:30] are don't care in Alarm comparison. Only SS[29:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_SS31 (31UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31] is don't care in Alarm comparison. Only SS[30:0] are compared */
#define RTC_ALARMSUBSECONDBINMASK_NONE (32UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:0] are compared and must match to activate alarm. */
/**
* @}
*/
/** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Clear_Definitions RTC Alarm Sub Seconds
* with binary mode auto clear Definitions
* @{
*/
#define RTC_ALARMSUBSECONDBIN_AUTOCLR_NO 0UL /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is free-running. */
#define RTC_ALARMSUBSECONDBIN_AUTOCLR_YES RTC_ALRMASSR_SSCLR /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFF FFFF to RTC_ALRMABINR -> SS[31:0] value and is automatically reloaded with 0xFFFF FFFF whenreaching RTC_ALRMABINR -> SS[31:0]. */
/**
* @}
*/
/** @defgroup RTCEx_RTC_Secure_Full RTCEx Secure Definition
* @{
*/
#define RTC_SECURE_FULL_YES RTC_SECCFGR_SEC /*!< RTC full secure */
#define RTC_SECURE_FULL_NO 0u /*!< RTC is not full secure, features can be unsecure. See RTC_LL_EC_UNSECURE_RTC_FEATURE */
/**
* @}
*/
/** @defgroup RTCEx_RTC_NonSecure_Features RTCEx Secure Features Definition
* @{
*/
#define RTC_NONSECURE_FEATURE_NONE (RTC_SECCFGR_INITSEC | RTC_SECCFGR_CALSEC | \
RTC_SECCFGR_TSSEC | RTC_SECCFGR_WUTSEC | \
RTC_SECCFGR_ALRASEC | RTC_SECCFGR_ALRBSEC)
#define RTC_NONSECURE_FEATURE_INIT ~RTC_SECCFGR_INITSEC /*!< Initialization */
#define RTC_NONSECURE_FEATURE_CAL ~RTC_SECCFGR_CALSEC /*!< Calibration */
#define RTC_NONSECURE_FEATURE_TS ~RTC_SECCFGR_TSSEC /*!< Time stamp */
#define RTC_NONSECURE_FEATURE_WUT ~RTC_SECCFGR_WUTSEC /*!< Wake up timer */
#define RTC_NONSECURE_FEATURE_ALRA ~RTC_SECCFGR_ALRASEC /*!< Alarm A */
#define RTC_NONSECURE_FEATURE_ALRB ~RTC_SECCFGR_ALRBSEC /*!< Alarm B */
#define RTC_NONSECURE_FEATURE_ALL 0u
/**
* @}
*/
/** @defgroup RTCEx_TAMP_Secure_Full RTCEx TAMP Secure Definition
* @{
*/
#define TAMP_SECURE_FULL_YES TAMP_SECCFGR_TAMPSEC /*!< TAMPER full secure */
#define TAMP_SECURE_FULL_NO 0u /*!< TAMPER is not secure */
/**
* @}
*/
/** @defgroup RTCEx_TAMP_Monotonic_Counter_Secure RTCEx TAMP Monotonic Counter Secure Definition
* @{
*/
#define TAMP_MONOTONIC_CNT_SECURE_YES TAMP_SECCFGR_CNT1SEC /*!< TAMPER Monotonic Counter secure */
#define TAMP_MONOTONIC_CNT_SECURE_NO 0u /*!< TAMPER Monotonic Counter is not secure */
/**
* @}
*/
/** @defgroup RTCEx_RTC_Privilege_Full RTCEx Privilege Full Definition
* @{
*/
#define RTC_PRIVILEGE_FULL_YES RTC_PRIVCFGR_PRIV
#define RTC_PRIVILEGE_FULL_NO 0u
/**
* @}
*/
/** @defgroup RTCEx_RTC_Privilege_Features RTCEx Privilege Features Definition
* @{
*/
#define RTC_PRIVILEGE_FEATURE_NONE 0u
#define RTC_PRIVILEGE_FEATURE_INIT RTC_PRIVCFGR_INITPRIV /*!< Initialization */
#define RTC_PRIVILEGE_FEATURE_CAL RTC_PRIVCFGR_CALPRIV /*!< Calibration */
#define RTC_PRIVILEGE_FEATURE_TS RTC_PRIVCFGR_TSPRIV /*!< Time stamp */
#define RTC_PRIVILEGE_FEATURE_WUT RTC_PRIVCFGR_WUTPRIV /*!< Wake up timer */
#define RTC_PRIVILEGE_FEATURE_ALRA RTC_PRIVCFGR_ALRAPRIV /*!< Alarm A */
#define RTC_PRIVILEGE_FEATURE_ALRB RTC_PRIVCFGR_ALRBPRIV /*!< Alarm B */
#define RTC_PRIVILEGE_FEATURE_ALL (RTC_PRIVCFGR_INITPRIV | RTC_PRIVCFGR_CALPRIV | \
RTC_PRIVCFGR_TSPRIV | RTC_PRIVCFGR_WUTPRIV | \
RTC_PRIVCFGR_ALRAPRIV | RTC_PRIVCFGR_ALRBPRIV)
/**
* @}
*/
/** @defgroup RTCEx_TAMP_Privilege_Full RTCEx TAMP security Definition
* @{
*/
#define TAMP_PRIVILEGE_FULL_YES TAMP_PRIVCFGR_TAMPPRIV
#define TAMP_PRIVILEGE_FULL_NO 0u
/**
* @}
*/
/** @defgroup RTCEx_TAMP_Secret_Device_Conf_Erase RTCEx TAMP Secret Device Conf Erase Definition
* @{
*/
#define TAMP_SECRETDEVICE_ERASE_ENABLE TAMP_ERCFGR0
#define TAMP_SECRETDEVICE_ERASE_DISABLE 0u
/**
* @}
*/
/** @defgroup RTCEx_TAMP_Monotonic_Counter_Privilege RTCEx TAMP Monotonic Counter Privilege Definition
* @{
*/
#define TAMP_MONOTONIC_CNT_PRIVILEGE_YES TAMP_PRIVCFGR_CNT1PRIV
#define TAMP_MONOTONIC_CNT_PRIVILEGE_NO 0u
/**
* @}
*/
/** @defgroup RTCEx_Backup_Reg_Privilege_zone RTCEx Privilege Backup register privilege zone Definition
* @{
*/
#define RTC_PRIVILEGE_BKUP_ZONE_NONE 0u
#define RTC_PRIVILEGE_BKUP_ZONE_1 TAMP_PRIVCFGR_BKPRWPRIV
#define RTC_PRIVILEGE_BKUP_ZONE_2 TAMP_PRIVCFGR_BKPWPRIV
#define RTC_PRIVILEGE_BKUP_ZONE_ALL (RTC_PRIVILEGE_BKUP_ZONE_1 | RTC_PRIVILEGE_BKUP_ZONE_2)
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
* @{
*/
/** @brief Clear the specified RTC pending flag.
* @param __HANDLE__ specifies the RTC Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag
* @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag
* @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag
* @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag
* @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag
* @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag
* @retval None
*/
#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) (RTC->SCR = (__FLAG__))
/** @brief Check whether the specified RTC flag is set or not.
* @param __HANDLE__ specifies the RTC Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag
* @arg @ref RTC_FLAG_INITF Initialization flag
* @arg @ref RTC_FLAG_RSF Registers synchronization flag
* @arg @ref RTC_FLAG_INITS Initialization status flag
* @arg @ref RTC_FLAG_SHPF Shift operation pending flag
* @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag
* @arg @ref RTC_FLAG_ALRAF Alarm A write flag
* @arg @ref RTC_FLAG_ALRBF Alarm B write flag
* @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag
* @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag
* @arg @ref RTC_FLAG_TSF Time-stamp flag
* @arg @ref RTC_FLAG_WUTF Wakeup timer flag
* @arg @ref RTC_FLAG_ALRBF Alarm B flag
* @arg @ref RTC_FLAG_ALRAF Alarm A flag
* @retval None
*/
#define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? (RTC->ICSR &\
(1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) : \
(RTC->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))))
/* ---------------------------------WAKEUPTIMER---------------------------------*/
/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
* @{
*/
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_WUTE))
/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_WUTE))
/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled.
* This parameter can be:
* @arg @ref RTC_IT_WUT WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled.
* This parameter can be:
* @arg @ref RTC_IT_WUT WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.
* This parameter can be:
* @arg @ref RTC_IT_WUT WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) & ((__INTERRUPT__)>> 12U)) !=\
0UL) ? 1UL : 0UL)
/**
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
* This parameter can be:
* @arg @ref RTC_IT_WUT WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (__INTERRUPT__)) != \
0UL) ? 1UL : 0UL)
/**
* @brief Get the selected RTC WakeUpTimers flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not.
* This parameter can be:
* @arg @ref RTC_FLAG_WUTF
* @arg @ref RTC_FLAG_WUTWF
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__)))
/**
* @brief Clear the RTC Wake Up timers pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear.
* This parameter can be:
* @arg @ref RTC_FLAG_WUTF
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_WUTF))
/**
* @}
*/
/* ---------------------------------TIMESTAMP---------------------------------*/
/** @defgroup RTCEx_Timestamp RTC Timestamp
* @{
*/
/**
* @brief Enable the RTC TimeStamp peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TSE))
/**
* @brief Disable the RTC TimeStamp peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TSE))
/**
* @brief Enable the RTC TimeStamp interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled.
* This parameter can be:
* @arg @ref RTC_IT_TS TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC TimeStamp interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled.
* This parameter can be:
* @arg @ref RTC_IT_TS TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.
* This parameter can be:
* @arg @ref RTC_IT_TS TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) & ((__INTERRUPT__)>> 12U)) != \
0U) ? 1UL : 0UL)
/**
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
* This parameter can be:
* @arg @ref RTC_IT_TS TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (__INTERRUPT__)) != 0U) ?\
1UL : 0UL)
/**
* @brief Get the selected RTC TimeStamps flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not.
* This parameter can be:
* @arg @ref RTC_FLAG_TSF
* @arg @ref RTC_FLAG_TSOVF
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__)))
/**
* @brief Clear the RTC Time Stamps pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC TimeStamp Flag to clear.
* This parameter can be:
* @arg @ref RTC_FLAG_TSF
* @arg @ref RTC_FLAG_TSOVF
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == RTC_FLAG_TSF) ? \
(__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_TSF)) : \
(__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_TSOVF)))
/**
* @brief Enable the RTC internal TimeStamp peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_ITSE))
/**
* @brief Disable the RTC internal TimeStamp peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_ITSE))
/**
* @brief Get the selected RTC Internal Time Stamps flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not.
* This parameter can be:
* @arg @ref RTC_FLAG_ITSF
* @retval None
*/
#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),\
(__FLAG__)))
/**
* @brief Clear the RTC Internal Time Stamps pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear.
* This parameter can be:
* @arg @ref RTC_FLAG_ITSF
* @retval None
*/
#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__),\
RTC_CLEAR_ITSF))
/**
* @brief Enable the RTC TimeStamp on Tamper detection.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPTS))
/**
* @brief Disable the RTC TimeStamp on Tamper detection.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPTS))
/**
* @brief Enable the RTC Tamper detection output.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPOE))
/**
* @brief Disable the RTC Tamper detection output.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPOE))
/**
* @}
*/
/* ------------------------------Calibration----------------------------------*/
/** @defgroup RTCEx_Calibration RTC Calibration
* @{
*/
/**
* @brief Enable the RTC calibration output.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_COE))
/**
* @brief Disable the calibration output.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_COE))
/**
* @brief Enable the clock reference detection.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_REFCKON))
/**
* @brief Disable the clock reference detection.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_REFCKON))
/**
* @brief Get the selected RTC shift operations flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC shift operation Flag is pending or not.
* This parameter can be:
* @arg @ref RTC_FLAG_SHPF
* @retval None
*/
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__)))
/**
* @}
*/
/* ------------------------------Tamper----------------------------------*/
/** @defgroup RTCEx_Tamper RTCEx tamper
* @{
*/
/**
* @brief Enable the TAMP Tamper input detection.
* @param __HANDLE__ specifies the RTC handle.
* @param __TAMPER__ specifies the RTC Tamper source to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_TAMPER_ALL: All tampers
* @arg RTC_TAMPER_1: Tamper1
* @arg RTC_TAMPER_2: Tamper2
* @arg RTC_TAMPER_3: Tamper3
* @arg RTC_TAMPER_4: Tamper4
* @arg RTC_TAMPER_5: Tamper5
* @arg RTC_TAMPER_6: Tamper6
* @arg RTC_TAMPER_7: Tamper7
* @arg RTC_TAMPER_8: Tamper8
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 |= (__TAMPER__))
/**
* @brief Disable the TAMP Tamper input detection.
* @param __HANDLE__ specifies the RTC handle.
* @param __TAMPER__ specifies the RTC Tamper sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_TAMPER_ALL: All tampers
* @arg RTC_TAMPER_1: Tamper1
* @arg RTC_TAMPER_2: Tamper2
* @arg RTC_TAMPER_3: Tamper3
* @arg RTC_TAMPER_4: Tamper4
* @arg RTC_TAMPER_5: Tamper5
* @arg RTC_TAMPER_6: Tamper6
* @arg RTC_TAMPER_7: Tamper7
* @arg RTC_TAMPER_8: Tamper8
*/
#define __HAL_RTC_TAMPER_DISABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 &= ~(__TAMPER__))
/**************************************************************************************************/
/**
* @brief Enable the TAMP Tamper interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP_ALL: All tampers interrupts
* @arg RTC_IT_TAMP_1: Tamper1 interrupt
* @arg RTC_IT_TAMP_2: Tamper2 interrupt
* @arg RTC_IT_TAMP_3: Tamper3 interrupt
* @arg RTC_IT_TAMP_4: Tamper4 interrupt
* @arg RTC_IT_TAMP_5: Tamper5 interrupt
* @arg RTC_IT_TAMP_6: Tamper6 interrupt
* @arg RTC_IT_TAMP_7: Tamper7 interrupt
* @arg RTC_IT_TAMP_8: Tamper8 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER |= (__INTERRUPT__))
/**
* @brief Disable the TAMP Tamper interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP_ALL: All tampers interrupts
* @arg RTC_IT_TAMP_1: Tamper1 interrupt
* @arg RTC_IT_TAMP_2: Tamper2 interrupt
* @arg RTC_IT_TAMP_3: Tamper3 interrupt
* @arg RTC_IT_TAMP_4: Tamper4 interrupt
* @arg RTC_IT_TAMP_5: Tamper5 interrupt
* @arg RTC_IT_TAMP_6: Tamper6 interrupt
* @arg RTC_IT_TAMP_7: Tamper7 interrupt
* @arg RTC_IT_TAMP_8: Tamper8 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER &= ~(__INTERRUPT__))
/**************************************************************************************************/
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
* This parameter can be:
* @arg RTC_IT_TAMP_ALL: All tampers interrupts
* @arg RTC_IT_TAMP_1: Tamper1 interrupt
* @arg RTC_IT_TAMP_2: Tamper2 interrupt
* @arg RTC_IT_TAMP_3: Tamper3 interrupt
* @arg RTC_IT_TAMP_4: Tamper4 interrupt
* @arg RTC_IT_TAMP_5: Tamper5 interrupt
* @arg RTC_IT_TAMP_6: Tamper6 interrupt
* @arg RTC_IT_TAMP_7: Tamper7 interrupt
* @arg RTC_IT_TAMP_8: Tamper8 interrupt
* @arg RTC_IT_INT_TAMP_ALL: All Internal Tamper interrupts
* @arg RTC_IT_INT_TAMP_1: Internal Tamper1 interrupt
* @arg RTC_IT_INT_TAMP_2: Internal Tamper2 interrupt
* @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt
* @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt
* @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt
* @arg RTC_IT_INT_TAMP_7: Internal Tamper7 interrupt
* @arg RTC_IT_INT_TAMP_8: Internal Tamper8 interrupt
* @arg RTC_IT_INT_TAMP_9: Internal Tamper9 interrupt
* @arg RTC_IT_INT_TAMP_11: Internal Tamper11 interrupt
* @arg RTC_IT_INT_TAMP_12: Internal Tamper12 interrupt
* @arg RTC_IT_INT_TAMP_13: Internal Tamper13 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((TAMP->MISR) & (__INTERRUPT__)) != 0U) ? 1UL : 0UL)
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
* This parameter can be:
* @arg RTC_IT_TAMP_ALL: All tampers interrupts
* @arg RTC_IT_TAMP_1: Tamper1 interrupt
* @arg RTC_IT_TAMP_2: Tamper2 interrupt
* @arg RTC_IT_TAMP_3: Tamper3 interrupt
* @arg RTC_IT_TAMP_4: Tamper4 interrupt
* @arg RTC_IT_TAMP_5: Tamper5 interrupt
* @arg RTC_IT_TAMP_6: Tamper6 interrupt
* @arg RTC_IT_TAMP_7: Tamper7 interrupt
* @arg RTC_IT_TAMP_8: Tamper8 interrupt
* @arg RTC_IT_INT_TAMP_ALL: All internal tampers interrupts
* @arg RTC_IT_INT_TAMP_1: Internal Tamper1 interrupt
* @arg RTC_IT_INT_TAMP_2: Internal Tamper2 interrupt
* @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt
* @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt
* @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt
* @arg RTC_IT_INT_TAMP_7: Internal Tamper7 interrupt
* @arg RTC_IT_INT_TAMP_8: Internal Tamper8 interrupt
* @arg RTC_IT_INT_TAMP_9: Internal Tamper9 interrupt
* @arg RTC_IT_INT_TAMP_11: Internal Tamper11 interrupt
* @arg RTC_IT_INT_TAMP_12: Internal Tamper12 interrupt
* @arg RTC_IT_INT_TAMP_13: Internal Tamper13 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((TAMP->IER) & (__INTERRUPT__)) != \
0U) ? 1UL : 0UL)
/**
* @brief Get the selected RTC Tampers flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_TAMP_ALL: All tampers flag
* @arg RTC_FLAG_TAMP_1: Tamper1 flag
* @arg RTC_FLAG_TAMP_2: Tamper2 flag
* @arg RTC_FLAG_TAMP_3: Tamper3 flag
* @arg RTC_FLAG_TAMP_4: Tamper4 flag
* @arg RTC_FLAG_TAMP_5: Tamper5 flag
* @arg RTC_FLAG_TAMP_6: Tamper6 flag
* @arg RTC_FLAG_TAMP_7: Tamper7 flag
* @arg RTC_FLAG_TAMP_8: Tamper8 flag
* @arg RTC_FLAG_INT_TAMP_1: Internal Tamper1 flag
* @arg RTC_FLAG_INT_TAMP_2: Internal Tamper2 flag
* @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag
* @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag
* @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag
* @arg RTC_FLAG_INT_TAMP_7: Internal Tamper7 flag
* @arg RTC_FLAG_INT_TAMP_8: Internal Tamper8 flag
* @arg RTC_FLAG_INT_TAMP_9: Internal Tamper9 flag
* @arg RTC_FLAG_INT_TAMP_11: Internal Tamper11 flag
* @arg RTC_FLAG_INT_TAMP_12: Internal Tamper12 flag
* @arg RTC_FLAG_INT_TAMP_13: Internal Tamper13 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((TAMP->SR) & (__FLAG__)) != 0U)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Tamper Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_TAMP_ALL: All tampers flag
* @arg RTC_FLAG_TAMP_1: Tamper1 flag
* @arg RTC_FLAG_TAMP_2: Tamper2 flag
* @arg RTC_FLAG_TAMP_3: Tamper3 flag
* @arg RTC_FLAG_TAMP_4: Tamper4 flag
* @arg RTC_FLAG_TAMP_5: Tamper5 flag
* @arg RTC_FLAG_TAMP_6: Tamper6 flag
* @arg RTC_FLAG_TAMP_7: Tamper7 flag
* @arg RTC_FLAG_TAMP_8: Tamper8 flag
* @arg RTC_FLAG_INT_TAMP_ALL: All Internal Tamper flags
* @arg RTC_FLAG_INT_TAMP_1: Internal Tamper1 flag
* @arg RTC_FLAG_INT_TAMP_2: Internal Tamper2 flag
* @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag
* @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag
* @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag
* @arg RTC_FLAG_INT_TAMP_7: Internal Tamper7 flag
* @arg RTC_FLAG_INT_TAMP_8: Internal Tamper8 flag
* @arg RTC_FLAG_INT_TAMP_9: Internal Tamper9 flag
* @arg RTC_FLAG_INT_TAMP_11: Internal Tamper11 flag
* @arg RTC_IT_INT_TAMP_12: Internal Tamper12 interrupt
* @arg RTC_IT_INT_TAMP_13: Internal Tamper13 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((TAMP->SCR) = (__FLAG__))
/**
* @}
*/
/* --------------------------------- SSR Underflow ---------------------------------*/
/** @defgroup RTCEx_SSR_Underflow RTC SSR Underflow
* @{
*/
/**
* @brief Enable the RTC SSRU interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be enabled.
* This parameter can be:
* @arg @ref RTC_IT_SSRU SSRU interrupt
* @retval None
*/
#define __HAL_RTC_SSRU_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC SSRU interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be disabled.
* This parameter can be:
* @arg @ref RTC_IT_SSRU SSRU interrupt
* @retval None
*/
#define __HAL_RTC_SSRU_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC SSRU interrupt has occurred or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC SSRU interrupt to check.
* This parameter can be:
* @arg @ref RTC_IT_SSRU SSRU interrupt
* @retval None
*/
#define __HAL_RTC_SSRU_GET_IT(__HANDLE__, __INTERRUPT__) (((RTC->MISR) & ((__INTERRUPT__) >> 1) != 0U) \
? 1U : 0U)
/**
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
* This parameter can be:
* @arg @ref RTC_IT_SSRU SSRU interrupt
* @retval None
*/
#define __HAL_RTC_SSRU_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
/**
* @brief Get the selected RTC SSRU's flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC SSRU Flag is pending or not.
* This parameter can be:
* @arg @ref RTC_FLAG_SSRUF
* @retval None
*/
#define __HAL_RTC_SSRU_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__)))
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC SSRU Flag to clear.
* This parameter can be:
* @arg @ref RTC_FLAG_SSRUF
* @retval None
*/
#define __HAL_RTC_SSRU_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_SSRUF))
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
* @{
*/
/* RTC TimeStamp functions *****************************************/
/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge,
uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge,
uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp,
RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* RTC Wake-up functions ******************************************************/
/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock,
uint32_t WakeUpAutoClr);
HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/* Extended Control functions ************************************************/
/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod,
uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterIncrement(RTC_HandleTypeDef *hrtc, uint32_t Instance);
HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterGet(RTC_HandleTypeDef *hrtc, uint32_t Instance, uint32_t *Value);
HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Extended RTC features functions *******************************************/
/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
* @{
*/
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
HAL_StatusTypeDef HAL_RTCEx_SetActiveTampers(RTC_HandleTypeDef *hrtc, RTC_ActiveTampersTypeDef *sAllTamper);
HAL_StatusTypeDef HAL_RTCEx_SetActiveSeed(RTC_HandleTypeDef *hrtc, uint32_t *pSeed);
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateActiveTampers(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper);
HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper);
HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_SetBoothardwareKey(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_GetActiveTampers(RTC_ActiveTampersTypeDef *sAllTamper);
void HAL_RTCEx_GetInternalTampers(RTC_InternalTamperTypeDef *sIntTamper);
void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper4EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper5EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper6EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper7EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper8EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper2EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper7EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper8EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper9EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper11EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper12EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper13EventCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions
* @{
*/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
void HAL_RTCEx_BKUPErase(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_BKUPBlock_Enable(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_BKUPBlock_Disable(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Erase_SecretDev_Conf(RTC_HandleTypeDef *hrtc, uint32_t SecretDeviceConf);
uint32_t HAL_RTCEx_Get_Erase_SecretDev_Conf(void);
/**
* @}
*/
/** @defgroup RTCEx_Exported_Functions_Group7 Extended RTC secure functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SecureModeGet(RTC_HandleTypeDef *hrtc, RTC_SecureStateTypeDef *secureState);
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
HAL_StatusTypeDef HAL_RTCEx_SecureModeSet(RTC_HandleTypeDef *hrtc, RTC_SecureStateTypeDef *secureState);
#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
/**
* @}
*/
/** @defgroup RTCEx_Exported_Functions_Group8 Extended RTC privilege functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeSet(RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState);
HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeGet(RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
* @{
*/
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
* @{
*/
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
#define IS_RTC_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
#define IS_RTC_TAMPER_TAMPERDETECTIONOUTPUT(MODE) (((MODE) == RTC_TAMPERDETECTIONOUTPUT_ENABLE) || \
((MODE) == RTC_TAMPERDETECTIONOUTPUT_DISABLE))
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT)
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM)
#define IS_RTC_LOW_POWER_CALIB(LPCAL) (((LPCAL) == RTC_LPCAL_SET) || \
((LPCAL) == RTC_LPCAL_RESET))
#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \
(((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U))
#define IS_RTC_INTERNAL_TAMPER(__INT_TAMPER__) ((((__INT_TAMPER__) & RTC_INT_TAMPER_ALL) != 0x00U) && \
(((__INT_TAMPER__) & ~RTC_INT_TAMPER_ALL) == 0x00U))
#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \
((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE))
#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \
((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \
((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \
((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE))
#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \
((__STATE__) == RTC_TAMPER_PULLUP_DISABLE))
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE)\
||((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
#define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER)
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
((SEL) == RTC_SHIFTADD1S_SET))
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS)
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
#define IS_RTC_SECURE_FULL(__STATE__) (((__STATE__) == RTC_SECURE_FULL_YES) || \
((__STATE__) == RTC_SECURE_FULL_NO))
#define IS_RTC_NONSECURE_FEATURES(__FEATURES__) (((__FEATURES__) & ~RTC_NONSECURE_FEATURE_NONE) == 0u)
#define IS_TAMP_SECURE_FULL(__STATE__) (((__STATE__) == TAMP_SECURE_FULL_YES) || \
((__STATE__) == TAMP_SECURE_FULL_NO))
#define IS_TAMP_MONOTONIC_CNT_SECURE(__STATE__) (((__STATE__) == TAMP_MONOTONIC_CNT_SECURE_YES) || \
((__STATE__) == TAMP_MONOTONIC_CNT_SECURE_NO))
#define IS_RTC_PRIVILEGE_FULL(__STATE__) (((__STATE__) == RTC_PRIVILEGE_FULL_YES) || \
((__STATE__) == RTC_PRIVILEGE_FULL_NO))
#define IS_RTC_PRIVILEGE_FEATURES(__FEATURES__) (((__FEATURES__) & ~RTC_PRIVILEGE_FEATURE_ALL) == 0u)
#define IS_TAMP_PRIVILEGE_FULL(__STATE__) (((__STATE__) == TAMP_PRIVILEGE_FULL_YES) || \
((__STATE__) == TAMP_PRIVILEGE_FULL_NO))
#define IS_TAMP_MONOTONIC_CNT_PRIVILEGE(__STATE__) (((__STATE__) == TAMP_MONOTONIC_CNT_PRIVILEGE_YES) || \
((__STATE__) == TAMP_MONOTONIC_CNT_PRIVILEGE_NO))
#define IS_RTC_PRIVILEGE_BKUP_ZONE(__ZONES__) (((__ZONES__) & ~RTC_PRIVILEGE_BKUP_ZONE_ALL) == 0u)
#define IS_RTC_BINARY_MODE(MODE) (((MODE) == RTC_BINARY_NONE) || \
((MODE) == RTC_BINARY_ONLY) || \
((MODE) == RTC_BINARY_MIX ))
#define IS_RTC_BINARY_MIX_BCDU(BDCU) (((BDCU) == RTC_BINARY_MIX_BCDU_0) || \
((BDCU) == RTC_BINARY_MIX_BCDU_1) || \
((BDCU) == RTC_BINARY_MIX_BCDU_2) || \
((BDCU) == RTC_BINARY_MIX_BCDU_3) || \
((BDCU) == RTC_BINARY_MIX_BCDU_4) || \
((BDCU) == RTC_BINARY_MIX_BCDU_5) || \
((BDCU) == RTC_BINARY_MIX_BCDU_6) || \
((BDCU) == RTC_BINARY_MIX_BCDU_7))
#define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK) (((MASK) == 0u) || \
(((MASK) >= RTC_ALARMSUBSECONDBINMASK_SS31_1) &&\
((MASK) <= RTC_ALARMSUBSECONDBINMASK_NONE)))
#define IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(SEL) (((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_NO) || \
((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_YES))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32U5xx_HAL_RTC_EX_H */