GitBucket
Newer
/**
******************************************************************************
* @file stm32wlxx_hal_rcc.h
* @author MCD Application Team
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WLxx_HAL_RCC_H
#define STM32WLxx_HAL_RCC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx_hal_def.h"
#include "stm32wlxx_ll_rcc.h"
#include "stm32wlxx_ll_bus.h"
/** @addtogroup STM32WLxx_HAL_Driver
* @{
*/
/** @addtogroup RCC
* @{
*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup RCC_Private_Constants
* @{
*/
/* Defines used for Flags */
#define CR_REG_INDEX 1U
#define BDCR_REG_INDEX 2U
#define CSR_REG_INDEX 3U
#define REG_INDEX_POS 5U
#define RCC_FLAG_MASK 0x1FU
/* Defines Oscillator Masks */
#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */
/** @defgroup RCC_Timeout_Value Timeout Values
* @{
*/
#define RCC_DBP_TIMEOUT_VALUE 2U /*!< 2 ms (minimum Tick + 1) */
#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /*!< LSE timeout in ms */
#define PLL_TIMEOUT_VALUE 10U /*!< 10 ms (minimum Tick + 1) */
/**
* @}
*/
/** @defgroup RCC_Reset_Flag Reset Flag
* @{
*/
#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */
#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */
#define RCC_RESET_FLAG_PWR RCC_CSR_BORRSTF /*!< BOR or POR/PDR reset flag */
#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */
#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */
#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \
RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \
RCC_RESET_FLAG_LPWR)
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup RCC_Private_Macros
* @{
*/
#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
(((__OSCILLATOR__) & ~RCC_OSCILLATORTYPE_ALL) == 0x00U))
#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
((__HSE__) == RCC_HSE_BYPASS_PWR))
#define IS_RCC_HSEDIV(__HSEDIV__) (((__HSEDIV__) == RCC_HSE_DIV1) || ((__HSEDIV__) == RCC_HSE_DIV2))
#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || \
((__LSE__) == RCC_LSE_ON) || ((__LSE__) == RCC_LSE_ON_RTC_ONLY) || \
((__LSE__) == RCC_LSE_BYPASS) || ((__LSE__) == RCC_LSE_BYPASS_RTC_ONLY))
#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U)
#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
#define IS_RCC_LSIDIV(__LSIDIV__) (((__LSIDIV__) == RCC_LSI_DIV1) || ((__LSIDIV__) == RCC_LSI_DIV128))
#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON))
#define IS_RCC_MSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)255U)
#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \
((__PLL__) == RCC_PLL_ON))
#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \
((__SOURCE__) == RCC_PLLSOURCE_MSI) || \
((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
((__SOURCE__) == RCC_PLLSOURCE_HSE))
#define IS_RCC_PLLM_VALUE(__VALUE__) (((__VALUE__) == RCC_PLLM_DIV1) || \
((__VALUE__) == RCC_PLLM_DIV2) || \
((__VALUE__) == RCC_PLLM_DIV3) || \
((__VALUE__) == RCC_PLLM_DIV4) || \
((__VALUE__) == RCC_PLLM_DIV5) || \
((__VALUE__) == RCC_PLLM_DIV6) || \
((__VALUE__) == RCC_PLLM_DIV7) || \
((__VALUE__) == RCC_PLLM_DIV8))
#define IS_RCC_PLLN_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U))
#define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32))
#define IS_RCC_PLLQ_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8))
#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8))
#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \
((__RANGE__) == RCC_MSIRANGE_1) || \
((__RANGE__) == RCC_MSIRANGE_2) || \
((__RANGE__) == RCC_MSIRANGE_3) || \
((__RANGE__) == RCC_MSIRANGE_4) || \
((__RANGE__) == RCC_MSIRANGE_5) || \
((__RANGE__) == RCC_MSIRANGE_6) || \
((__RANGE__) == RCC_MSIRANGE_7) || \
((__RANGE__) == RCC_MSIRANGE_8) || \
((__RANGE__) == RCC_MSIRANGE_9) || \
((__RANGE__) == RCC_MSIRANGE_10) || \
((__RANGE__) == RCC_MSIRANGE_11))
#if defined(DUAL_CORE)
#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= (RCC_CLOCKTYPE_SYSCLK | \
RCC_CLOCKTYPE_HCLK | \
RCC_CLOCKTYPE_PCLK1 | \
RCC_CLOCKTYPE_PCLK2 | \
RCC_CLOCKTYPE_HCLK2 | \
RCC_CLOCKTYPE_HCLK3)))
#else
#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= (RCC_CLOCKTYPE_SYSCLK | \
RCC_CLOCKTYPE_HCLK | \
RCC_CLOCKTYPE_PCLK1 | \
RCC_CLOCKTYPE_PCLK2 | \
RCC_CLOCKTYPE_HCLK3)))
#endif /* DUAL_CORE */
#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \
((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
#define IS_RCC_HCLKx(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
((__HCLK__) == RCC_SYSCLK_DIV3) || ((__HCLK__) == RCC_SYSCLK_DIV4) || \
((__HCLK__) == RCC_SYSCLK_DIV5) || ((__HCLK__) == RCC_SYSCLK_DIV6) || \
((__HCLK__) == RCC_SYSCLK_DIV8) || ((__HCLK__) == RCC_SYSCLK_DIV10) || \
((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV32) || \
((__HCLK__) == RCC_SYSCLK_DIV64) || ((__HCLK__) == RCC_SYSCLK_DIV128) || \
((__HCLK__) == RCC_SYSCLK_DIV256) || ((__HCLK__) == RCC_SYSCLK_DIV512))
#define IS_RCC_PCLKx(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
((__PCLK__) == RCC_HCLK_DIV16))
#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1))
#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \
((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \
((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \
((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK))
#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \
((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \
((__DIV__) == RCC_MCODIV_16))
#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \
((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI))
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RCC_Exported_Types RCC Exported Types
* @{
*/
/**
* @brief RCC PLL configuration structure definition
*/
typedef struct
{
uint32_t PLLState; /*!< The new state of the PLL.
This parameter must be a value of @ref RCC_PLL_Config */
uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
This parameter must be a value of @ref RCC_PLL_Clock_Source */
uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
This parameter must be a value of @ref RCC_PLLM_Clock_Divider */
uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
This parameter must be a number between Min_Data = 6 and Max_Data = 127 */
uint32_t PLLP; /*!< PLLP: Division factor for ADC clock.
This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
uint32_t PLLQ; /*!< PLLQ: Division factor for I2S2 and RNG clock.
This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */
uint32_t PLLR; /*!< PLLR: Division for the main system clock.
User has to set the PLLR parameter correctly to not exceed max frequency 48 MHZ.
This parameter must be a value of @ref RCC_PLLR_Clock_Divider */
} RCC_PLLInitTypeDef;
/**
* @brief RCC Internal/External Oscillator (HSE, HSI, MSI, LSE and LSI) configuration structure definition
*/
typedef struct
{
uint32_t OscillatorType; /*!< The oscillators to be configured.
This parameter can be a combination of @ref RCC_Oscillator_Type */
uint32_t HSEState; /*!< The new state of the HSE.
This parameter can be a value of @ref RCC_HSE_Config */
uint32_t HSEDiv; /*!< The division factor of the HSE.
This parameter can be a value of @ref RCC_HSE_Div */
uint32_t LSEState; /*!< The new state of the LSE.
This parameter can be a value of @ref RCC_LSE_Config */
uint32_t HSIState; /*!< The new state of the HSI.
This parameter can be a value of @ref RCC_HSI_Config */
uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is @ref RCC_HSICALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
uint32_t LSIDiv; /*!< The division factor of the LSI.
This parameter can be a value of @ref RCC_LSI_Div */
uint32_t MSIState; /*!< The new state of the MSI.
This parameter can be a value of @ref RCC_MSI_Config */
uint32_t MSICalibrationValue; /*!< The calibration trimming value (default is @ref RCC_MSICALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint32_t MSIClockRange; /*!< The MSI frequency range.
This parameter can be a value of @ref RCC_MSI_Clock_Range */
RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */
} RCC_OscInitTypeDef;
/**
* @brief RCC System, AHB and APB buses clock configuration structure definition
*/
typedef struct
{
uint32_t ClockType; /*!< The clock to be configured.
This parameter can be a combination of @ref RCC_System_Clock_Type */
uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK).
This parameter can be a value of @ref RCC_System_Clock_Source */
uint32_t AHBCLKDivider; /*!< The AHBx clock (HCLK1) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_AHBx_Clock_Source */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_APBx_Clock_Source */
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_APBx_Clock_Source */
#if defined(DUAL_CORE)
uint32_t AHBCLK2Divider; /*!< The AHB clock (HCLK2) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_AHBx_Clock_Source */
#endif /* DUAL_CORE */
uint32_t AHBCLK3Divider; /*!< The AHB shared clock (HCLK3) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_AHBx_Clock_Source */
} RCC_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_Exported_Constants RCC Exported Constants
* @{
*/
/** @defgroup RCC_Oscillator_Type Oscillator Type
* @{
*/
#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */
#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */
#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */
#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */
#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */
#define RCC_OSCILLATORTYPE_MSI 0x00000020U /*!< MSI to configure */
/**
* @}
*/
/** @defgroup RCC_HSE_Config HSE Config
* @{
*/
#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */
#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */
#define RCC_HSE_BYPASS_PWR ((uint32_t)(RCC_CR_HSEBYPPWR | RCC_CR_HSEON)) /*!< TCXO external clock source for HSE clock */
/**
* @}
*/
/** @defgroup RCC_HSE_Div HSE Div
* @{
*/
#define RCC_HSE_DIV1 0x00000000U /*!< HSE clock not divided */
#define RCC_HSE_DIV2 RCC_CR_HSEPRE /*!< HSE clock divided by 2 */
/**
* @}
*/
/** @defgroup RCC_LSE_Config LSE Config
* @{
*/
#define RCC_LSE_OFF 0U /*!< LSE clock deactivation */
#define RCC_LSE_ON_RTC_ONLY RCC_BDCR_LSEON /*!< LSE clock activation for RTC only */
#define RCC_LSE_ON ((uint32_t)(RCC_BDCR_LSESYSEN | RCC_BDCR_LSEON)) /*!< LSE clock activation for RTC and other peripherals */
#define RCC_LSE_BYPASS_RTC_ONLY ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSESYSEN | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
/**
* @}
*/
/** @defgroup RCC_HSI_Config HSI Config
* @{
*/
#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */
#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */
/**
* @}
*/
/** @defgroup RCC_LSI_Config LSI Config
* @{
*/
#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */
#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
/**
* @}
*/
/** @defgroup RCC_LSI_Div LSI Div
* @{
*/
#define RCC_LSI_DIV1 LL_RCC_LSI_PREDIV_1 /*!< LSI clock not divided */
#define RCC_LSI_DIV128 LL_RCC_LSI_PREDIV_128 /*!< LSI clock divided by 128 */
/**
* @}
*/
/** @defgroup RCC_MSI_Config MSI Config
* @{
*/
#define RCC_MSI_OFF 0x00000000U /*!< MSI clock deactivation */
#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */
#define RCC_MSICALIBRATION_DEFAULT 0U /*!< Default MSI calibration trimming value */
/**
* @}
*/
/** @defgroup RCC_PLL_Config PLL Config
* @{
*/
#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */
#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */
#define RCC_PLL_ON 0x00000002U /*!< PLL activation */
/**
* @}
*/
/** @defgroup RCC_PLLM_Clock_Divider PLLM Clock Divider
* @{
*/
#define RCC_PLLM_DIV1 LL_RCC_PLLM_DIV_1 /*!< PLLM division factor = 1 */
#define RCC_PLLM_DIV2 LL_RCC_PLLM_DIV_2 /*!< PLLM division factor = 2 */
#define RCC_PLLM_DIV3 LL_RCC_PLLM_DIV_3 /*!< PLLM division factor = 3 */
#define RCC_PLLM_DIV4 LL_RCC_PLLM_DIV_4 /*!< PLLM division factor = 4 */
#define RCC_PLLM_DIV5 LL_RCC_PLLM_DIV_5 /*!< PLLM division factor = 5 */
#define RCC_PLLM_DIV6 LL_RCC_PLLM_DIV_6 /*!< PLLM division factor = 6 */
#define RCC_PLLM_DIV7 LL_RCC_PLLM_DIV_7 /*!< PLLM division factor = 7 */
#define RCC_PLLM_DIV8 LL_RCC_PLLM_DIV_8 /*!< PLLM division factor = 8 */
/**
* @}
*/
/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
* @{
*/
#define RCC_PLLP_DIV2 LL_RCC_PLLP_DIV_2 /*!< PLLP division factor = 2 */
#define RCC_PLLP_DIV3 LL_RCC_PLLP_DIV_3 /*!< PLLP division factor = 3 */
#define RCC_PLLP_DIV4 LL_RCC_PLLP_DIV_4 /*!< PLLP division factor = 4 */
#define RCC_PLLP_DIV5 LL_RCC_PLLP_DIV_5 /*!< PLLP division factor = 5 */
#define RCC_PLLP_DIV6 LL_RCC_PLLP_DIV_6 /*!< PLLP division factor = 6 */
#define RCC_PLLP_DIV7 LL_RCC_PLLP_DIV_7 /*!< PLLP division factor = 7 */
#define RCC_PLLP_DIV8 LL_RCC_PLLP_DIV_8 /*!< PLLP division factor = 8 */
#define RCC_PLLP_DIV9 LL_RCC_PLLP_DIV_9 /*!< PLLP division factor = 9 */
#define RCC_PLLP_DIV10 LL_RCC_PLLP_DIV_10 /*!< PLLP division factor = 10 */
#define RCC_PLLP_DIV11 LL_RCC_PLLP_DIV_11 /*!< PLLP division factor = 11 */
#define RCC_PLLP_DIV12 LL_RCC_PLLP_DIV_12 /*!< PLLP division factor = 12 */
#define RCC_PLLP_DIV13 LL_RCC_PLLP_DIV_13 /*!< PLLP division factor = 13 */
#define RCC_PLLP_DIV14 LL_RCC_PLLP_DIV_14 /*!< PLLP division factor = 14 */
#define RCC_PLLP_DIV15 LL_RCC_PLLP_DIV_15 /*!< PLLP division factor = 15 */
#define RCC_PLLP_DIV16 LL_RCC_PLLP_DIV_16 /*!< PLLP division factor = 16 */
#define RCC_PLLP_DIV17 LL_RCC_PLLP_DIV_17 /*!< PLLP division factor = 17 */
#define RCC_PLLP_DIV18 LL_RCC_PLLP_DIV_18 /*!< PLLP division factor = 18 */
#define RCC_PLLP_DIV19 LL_RCC_PLLP_DIV_19 /*!< PLLP division factor = 19 */
#define RCC_PLLP_DIV20 LL_RCC_PLLP_DIV_20 /*!< PLLP division factor = 20 */
#define RCC_PLLP_DIV21 LL_RCC_PLLP_DIV_21 /*!< PLLP division factor = 21 */
#define RCC_PLLP_DIV22 LL_RCC_PLLP_DIV_22 /*!< PLLP division factor = 22 */
#define RCC_PLLP_DIV23 LL_RCC_PLLP_DIV_23 /*!< PLLP division factor = 23 */
#define RCC_PLLP_DIV24 LL_RCC_PLLP_DIV_24 /*!< PLLP division factor = 24 */
#define RCC_PLLP_DIV25 LL_RCC_PLLP_DIV_25 /*!< PLLP division factor = 25 */
#define RCC_PLLP_DIV26 LL_RCC_PLLP_DIV_26 /*!< PLLP division factor = 26 */
#define RCC_PLLP_DIV27 LL_RCC_PLLP_DIV_27 /*!< PLLP division factor = 27 */
#define RCC_PLLP_DIV28 LL_RCC_PLLP_DIV_28 /*!< PLLP division factor = 28 */
#define RCC_PLLP_DIV29 LL_RCC_PLLP_DIV_29 /*!< PLLP division factor = 29 */
#define RCC_PLLP_DIV30 LL_RCC_PLLP_DIV_30 /*!< PLLP division factor = 30 */
#define RCC_PLLP_DIV31 LL_RCC_PLLP_DIV_31 /*!< PLLP division factor = 31 */
#define RCC_PLLP_DIV32 LL_RCC_PLLP_DIV_32 /*!< PLLP division factor = 32 */
/**
* @}
*/
/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider
* @{
*/
#define RCC_PLLQ_DIV2 LL_RCC_PLLQ_DIV_2 /*!< PLLQ division factor = 2 */
#define RCC_PLLQ_DIV3 LL_RCC_PLLQ_DIV_3 /*!< PLLQ division factor = 3 */
#define RCC_PLLQ_DIV4 LL_RCC_PLLQ_DIV_4 /*!< PLLQ division factor = 4 */
#define RCC_PLLQ_DIV5 LL_RCC_PLLQ_DIV_5 /*!< PLLQ division factor = 5 */
#define RCC_PLLQ_DIV6 LL_RCC_PLLQ_DIV_6 /*!< PLLQ division factor = 6 */
#define RCC_PLLQ_DIV7 LL_RCC_PLLQ_DIV_7 /*!< PLLQ division factor = 7 */
#define RCC_PLLQ_DIV8 LL_RCC_PLLQ_DIV_8 /*!< PLLQ division factor = 8 */
/**
* @}
*/
/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider
* @{
*/
#define RCC_PLLR_DIV2 LL_RCC_PLLR_DIV_2 /*!< PLLR division factor = 2 */
#define RCC_PLLR_DIV3 LL_RCC_PLLR_DIV_3 /*!< PLLR division factor = 3 */
#define RCC_PLLR_DIV4 LL_RCC_PLLR_DIV_4 /*!< PLLR division factor = 4 */
#define RCC_PLLR_DIV5 LL_RCC_PLLR_DIV_5 /*!< PLLR division factor = 5 */
#define RCC_PLLR_DIV6 LL_RCC_PLLR_DIV_6 /*!< PLLR division factor = 6 */
#define RCC_PLLR_DIV7 LL_RCC_PLLR_DIV_7 /*!< PLLR division factor = 7 */
#define RCC_PLLR_DIV8 LL_RCC_PLLR_DIV_8 /*!< PLLR division factor = 8 */
/**
* @}
*/
/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
* @{
*/
#define RCC_PLLSOURCE_NONE LL_RCC_PLLSOURCE_NONE /*!< No clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_MSI LL_RCC_PLLSOURCE_MSI /*!< MSI clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_HSI LL_RCC_PLLSOURCE_HSI /*!< HSI clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_HSE LL_RCC_PLLSOURCE_HSE /*!< HSE clock selected as PLL entry clock source */
/**
* @}
*/
/** @defgroup RCC_PLL_Clock_Output PLL Clock Output
* @{
*/
#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selected from main PLL */
#define RCC_PLL_I2S2CLK RCC_PLLCFGR_PLLQEN /*!< PLLI2S2CLK selected from main PLL */
#define RCC_PLL_RNGCLK RCC_PLLCFGR_PLLQEN /*!< PLLRNGCLK selected from main PLL */
#define RCC_PLL_ADCCLK RCC_PLLCFGR_PLLPEN /*!< PLLADCCLK selected from main PLL */
/**
* @}
*/
/** @defgroup RCC_MSI_Clock_Range MSI Clock Range
* @{
*/
#define RCC_MSIRANGE_0 LL_RCC_MSIRANGE_0 /*!< MSI = 100 KHz */
#define RCC_MSIRANGE_1 LL_RCC_MSIRANGE_1 /*!< MSI = 200 KHz */
#define RCC_MSIRANGE_2 LL_RCC_MSIRANGE_2 /*!< MSI = 400 KHz */
#define RCC_MSIRANGE_3 LL_RCC_MSIRANGE_3 /*!< MSI = 800 KHz */
#define RCC_MSIRANGE_4 LL_RCC_MSIRANGE_4 /*!< MSI = 1 MHz */
#define RCC_MSIRANGE_5 LL_RCC_MSIRANGE_5 /*!< MSI = 2 MHz */
#define RCC_MSIRANGE_6 LL_RCC_MSIRANGE_6 /*!< MSI = 4 MHz */
#define RCC_MSIRANGE_7 LL_RCC_MSIRANGE_7 /*!< MSI = 8 MHz */
#define RCC_MSIRANGE_8 LL_RCC_MSIRANGE_8 /*!< MSI = 16 MHz */
#define RCC_MSIRANGE_9 LL_RCC_MSIRANGE_9 /*!< MSI = 24 MHz */
#define RCC_MSIRANGE_10 LL_RCC_MSIRANGE_10 /*!< MSI = 32 MHz */
#define RCC_MSIRANGE_11 LL_RCC_MSIRANGE_11 /*!< MSI = 48 MHz */
/**
* @}
*/
/** @defgroup RCC_System_Clock_Type System Clock Type
* @{
*/
#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */
#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */
#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */
#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */
#if defined(DUAL_CORE)
#define RCC_CLOCKTYPE_HCLK2 0x00000020U /*!< HCLK2 to configure */
#endif /* DUAL_CORE */
#define RCC_CLOCKTYPE_HCLK3 0x00000040U /*!< HCLK3 to configure */
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source System Clock Source
* @{
*/
#define RCC_SYSCLKSOURCE_MSI LL_RCC_SYS_CLKSOURCE_MSI /*!< MSI selected as system clock */
#define RCC_SYSCLKSOURCE_HSI LL_RCC_SYS_CLKSOURCE_HSI /*!< HSI selected as system clock */
#define RCC_SYSCLKSOURCE_HSE LL_RCC_SYS_CLKSOURCE_HSE /*!< HSE selected as system clock */
#define RCC_SYSCLKSOURCE_PLLCLK LL_RCC_SYS_CLKSOURCE_PLL /*!< PLL selected as system clock */
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
* @{
*/
#define RCC_SYSCLKSOURCE_STATUS_MSI LL_RCC_SYS_CLKSOURCE_STATUS_MSI /*!< MSI used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_HSI LL_RCC_SYS_CLKSOURCE_STATUS_HSI /*!< HSI used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_HSE LL_RCC_SYS_CLKSOURCE_STATUS_HSE /*!< HSE used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_PLLCLK LL_RCC_SYS_CLKSOURCE_STATUS_PLL /*!< PLL used as system clock */
/**
* @}
*/
/** @defgroup RCC_AHBx_Clock_Source AHB Clock Source
* @{
*/
#define RCC_SYSCLK_DIV1 LL_RCC_SYSCLK_DIV_1 /*!< SYSCLK not divided */
#define RCC_SYSCLK_DIV2 LL_RCC_SYSCLK_DIV_2 /*!< SYSCLK divided by 2 */
#define RCC_SYSCLK_DIV3 LL_RCC_SYSCLK_DIV_3 /*!< SYSCLK divided by 3 */
#define RCC_SYSCLK_DIV4 LL_RCC_SYSCLK_DIV_4 /*!< SYSCLK divided by 4 */
#define RCC_SYSCLK_DIV5 LL_RCC_SYSCLK_DIV_5 /*!< SYSCLK divided by 5 */
#define RCC_SYSCLK_DIV6 LL_RCC_SYSCLK_DIV_6 /*!< SYSCLK divided by 6 */
#define RCC_SYSCLK_DIV8 LL_RCC_SYSCLK_DIV_8 /*!< SYSCLK divided by 8 */
#define RCC_SYSCLK_DIV10 LL_RCC_SYSCLK_DIV_10 /*!< SYSCLK divided by 10 */
#define RCC_SYSCLK_DIV16 LL_RCC_SYSCLK_DIV_16 /*!< SYSCLK divided by 16 */
#define RCC_SYSCLK_DIV32 LL_RCC_SYSCLK_DIV_32 /*!< SYSCLK divided by 32 */
#define RCC_SYSCLK_DIV64 LL_RCC_SYSCLK_DIV_64 /*!< SYSCLK divided by 64 */
#define RCC_SYSCLK_DIV128 LL_RCC_SYSCLK_DIV_128 /*!< SYSCLK divided by 128 */
#define RCC_SYSCLK_DIV256 LL_RCC_SYSCLK_DIV_256 /*!< SYSCLK divided by 256 */
#define RCC_SYSCLK_DIV512 LL_RCC_SYSCLK_DIV_512 /*!< SYSCLK divided by 512 */
/**
* @}
*/
/** @defgroup RCC_APBx_Clock_Source APB1 Clock Source
* @{
*/
#define RCC_HCLK_DIV1 LL_RCC_APB1_DIV_1 /*!< HCLK not divided */
#define RCC_HCLK_DIV2 LL_RCC_APB1_DIV_2 /*!< HCLK divided by 2 */
#define RCC_HCLK_DIV4 LL_RCC_APB1_DIV_4 /*!< HCLK divided by 4 */
#define RCC_HCLK_DIV8 LL_RCC_APB1_DIV_8 /*!< HCLK divided by 8 */
#define RCC_HCLK_DIV16 LL_RCC_APB1_DIV_16 /*!< HCLK divided by 16 */
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
* @{
*/
#define RCC_RTCCLKSOURCE_NONE LL_RCC_RTC_CLKSOURCE_NONE /*!< No clock used as RTC clock */
#define RCC_RTCCLKSOURCE_LSE LL_RCC_RTC_CLKSOURCE_LSE /*!< LSE oscillator clock used as RTC clock */
#define RCC_RTCCLKSOURCE_LSI LL_RCC_RTC_CLKSOURCE_LSI /*!< LSI oscillator clock used as RTC clock */
#define RCC_RTCCLKSOURCE_HSE_DIV32 LL_RCC_RTC_CLKSOURCE_HSE_DIV32 /*!< HSE oscillator clock divided by 32 used as RTC clock */
/**
* @}
*/
/** @defgroup RCC_MCO_Index MCO Index
* @{
*/
#define RCC_MCO1 0x00000000U /*!< MCO1 index */
#define RCC_MCO RCC_MCO1 /*!< MCO to be compliant with other families with 1 MCO */
/**
* @}
*/
/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
* @{
*/
#define RCC_MCO1SOURCE_NOCLOCK LL_RCC_MCO1SOURCE_NOCLOCK /*!< MCO1 output disabled, no clock on MCO1 */
#define RCC_MCO1SOURCE_SYSCLK LL_RCC_MCO1SOURCE_SYSCLK /*!< SYSCLK selected as MCO1 source */
#define RCC_MCO1SOURCE_MSI LL_RCC_MCO1SOURCE_MSI /*!< MSI selected as MCO1 source */
#define RCC_MCO1SOURCE_HSI LL_RCC_MCO1SOURCE_HSI /*!< HSI selected as MCO1 source */
#define RCC_MCO1SOURCE_HSE LL_RCC_MCO1SOURCE_HSE /*!< HSE after stabilization selected as MCO1 source */
#define RCC_MCO1SOURCE_PLLCLK LL_RCC_MCO1SOURCE_PLLCLK /*!< Main PLLRCLK selected as MCO1 source */
#define RCC_MCO1SOURCE_LSI LL_RCC_MCO1SOURCE_LSI /*!< LSI selected as MCO1 source */
#define RCC_MCO1SOURCE_LSE LL_RCC_MCO1SOURCE_LSE /*!< LSE selected as MCO1 source */
#define RCC_MCO1SOURCE_PLLPCLK LL_RCC_MCO1SOURCE_PLLPCLK /*!< Main PLLPCLK selected as MCO1 source */
#define RCC_MCO1SOURCE_PLLQCLK LL_RCC_MCO1SOURCE_PLLQCLK /*!< Main PLLQCLK selected as MCO1 source */
/**
* @}
*/
/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler
* @{
*/
#define RCC_MCODIV_1 LL_RCC_MCO1_DIV_1 /*!< MCO not divided */
#define RCC_MCODIV_2 LL_RCC_MCO1_DIV_2 /*!< MCO divided by 2 */
#define RCC_MCODIV_4 LL_RCC_MCO1_DIV_4 /*!< MCO divided by 4 */
#define RCC_MCODIV_8 LL_RCC_MCO1_DIV_8 /*!< MCO divided by 8 */
#define RCC_MCODIV_16 LL_RCC_MCO1_DIV_16 /*!< MCO divided by 16 */
/**
* @}
*/
/** @defgroup RCC_Interrupt Interrupts
* @{
*/
#define RCC_IT_LSIRDY LL_RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */
#define RCC_IT_LSERDY LL_RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */
#define RCC_IT_MSIRDY LL_RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */
#define RCC_IT_HSIRDY LL_RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */
#define RCC_IT_HSERDY LL_RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */
#define RCC_IT_PLLRDY LL_RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */
#define RCC_IT_HSECSS LL_RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */
#define RCC_IT_LSECSS LL_RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */
/**
* @}
*/
/** @defgroup RCC_Flag Flags
* Elements values convention: XXXYYYYYb
* - YYYYY : Flag position in the register
* - XXX : Register index
* - 001: CR register
* - 010: BDCR register
* - 011: CSR register
* @{
*/
/* Flags in the CR register */
#define RCC_FLAG_MSIRDY ((CR_REG_INDEX << REG_INDEX_POS) | RCC_CR_MSIRDY_Pos) /*!< MSI Ready flag */
#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << REG_INDEX_POS) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */
#define RCC_FLAG_HSIKERDY ((CR_REG_INDEX << REG_INDEX_POS) | RCC_CR_HSIKERDY_Pos) /*!< HSI Ready flag */
#define RCC_FLAG_HSERDY ((CR_REG_INDEX << REG_INDEX_POS) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */
#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << REG_INDEX_POS) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */
/* Flags in the BDCR register */
#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << REG_INDEX_POS) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */
#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << REG_INDEX_POS) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System failure detection flag */
#define RCC_FLAG_LSESYSRDY ((BDCR_REG_INDEX << REG_INDEX_POS) | RCC_BDCR_LSESYSRDY_Pos) /*!< LSE system clock ready flag */
/* Flags in the CSR register */
#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */
#define RCC_FLAG_RFRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_RFRSTF_Pos) /*!< Sub-GHz radio reset flag */
#define RCC_FLAG_RFILARSTF ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_RFILARSTF_Pos) /*!< Sub-GHz radio illegal command flag */
#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */
#define RCC_FLAG_PINRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_PINRSTF_Pos) /*!< Pin reset flag (NRST pin) */
#define RCC_FLAG_BORRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_BORRSTF_Pos) /*!< BOR reset flag */
#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */
#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_IWDGRSTF_Pos) /*!< Watchdog reset flag */
#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */
#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << REG_INDEX_POS) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */
/**
* @}
*/
/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration
* @{
*/
#define RCC_LSEDRIVE_LOW LL_RCC_LSEDRIVE_LOW /*!< LSE low drive capability */
#define RCC_LSEDRIVE_MEDIUMLOW LL_RCC_LSEDRIVE_MEDIUMLOW /*!< LSE medium low drive capability */
#define RCC_LSEDRIVE_MEDIUMHIGH LL_RCC_LSEDRIVE_MEDIUMHIGH /*!< LSE medium high drive capability */
#define RCC_LSEDRIVE_HIGH LL_RCC_LSEDRIVE_HIGH /*!< LSE high drive capability */
/**
* @}
*/
/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock
* @{
*/
#define RCC_STOP_WAKEUPCLOCK_MSI LL_RCC_STOP_WAKEUPCLOCK_MSI /*!< MSI selected after wake-up from STOP */
#define RCC_STOP_WAKEUPCLOCK_HSI LL_RCC_STOP_WAKEUPCLOCK_HSI /*!< HSI selected after wake-up from STOP */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup RCC_Exported_Macros RCC Exported Macros
* @{
*/
/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
* @brief Enable or disable the AHB1 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_DMA1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_CRC)
#define __HAL_RCC_DMA1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_CRC)
#else
#define __HAL_RCC_DMA1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC)
#define __HAL_RCC_DMA1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_CRC)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
* @brief Enable or disable the AHB2 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_GPIOA_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#define __HAL_RCC_GPIOA_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#else
#define __HAL_RCC_GPIOA_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH)
#define __HAL_RCC_GPIOA_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
* @brief Enable or disable the AHB3 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_PKA_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_FLASH)
#define __HAL_RCC_PKA_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_FLASH)
#else
#define __HAL_RCC_PKA_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FLASH)
#define __HAL_RCC_PKA_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_FLASH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
* @brief Enable or disable the APB1 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_TIM2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_TIM2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#else
#define __HAL_RCC_TIM2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_TIM2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPUART1)
#endif /* CORE_CM0PLUS */
#define __HAL_RCC_WWDG_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_WWDG)
#define __HAL_RCC_WWDG_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_WWDG)
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
* @brief Enable or disable the APB2 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_ADC_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM17)
#define __HAL_RCC_ADC_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM17)
#else
#define __HAL_RCC_ADC_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM17)
#define __HAL_RCC_ADC_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM17)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB3_Clock_Enable_Disable APB3 Peripheral Clock Enable Disable
* @brief Enable or disable the APB3 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_SUBGHZSPI_CLK_ENABLE() LL_C2_APB3_GRP1_EnableClock(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#define __HAL_RCC_SUBGHZSPI_CLK_DISABLE() LL_C2_APB3_GRP1_DisableClock(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#else
#define __HAL_RCC_SUBGHZSPI_CLK_ENABLE() LL_APB3_GRP1_EnableClock(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#define __HAL_RCC_SUBGHZSPI_CLK_DISABLE() LL_APB3_GRP1_DisableClock(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#endif /* CORE_CM0PLUS */
/* Aliases used by CubeMX for HAL SUBGHZ Init, MspInit and DeInit generation */
#define __HAL_RCC_SUBGHZ_CLK_ENABLE() __HAL_RCC_SUBGHZSPI_CLK_ENABLE()
#define __HAL_RCC_SUBGHZ_CLK_DISABLE() __HAL_RCC_SUBGHZSPI_CLK_DISABLE()
/**
* @}
*/
/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the AHB1 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_DMA1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_CRC)
#else
#define __HAL_RCC_DMA1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the AHB2 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#else
#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the AHB3 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_PKA_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_FLASH)
#else
#define __HAL_RCC_PKA_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_IPCC_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_FLASH_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_FLASH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the APB1 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#else
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPUART1)
#endif /* CORE_CM0PLUS */
#define __HAL_RCC_WWDG_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_WWDG)
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the APB2 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM17)
#else
#define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM17)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB3_Clock_Enable_Disable_Status APB3 Peripheral Clock Enabled or Disabled Status
* @brief Check whether the APB3 peripheral clock is enabled or not.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_SUBGHZSPI_IS_CLK_ENABLED() LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#else
#define __HAL_RCC_SUBGHZSPI_IS_CLK_ENABLED() LL_APB3_GRP1_IsEnabledClock(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#endif /* CORE_CM0PLUS */
/* Aliases used by CubeMX for HAL SUBGHZ Init, MspInit and DeInit generation */
#define __HAL_RCC_SUBGHZ_IS_CLK_ENABLED() __HAL_RCC_SUBGHZSPI_IS_CLK_ENABLED()
/**
* @}
*/
/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset
* @brief Force or release AHB1 peripheral reset.
* @{
*/
#define __HAL_RCC_AHB1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_ALL)
#define __HAL_RCC_DMA1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC)
#define __HAL_RCC_AHB1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_ALL)
#define __HAL_RCC_DMA1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC)
/**
* @}
*/
/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset
* @brief Force or release AHB2 peripheral reset.
* @{
*/
#define __HAL_RCC_AHB2_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ALL)
#define __HAL_RCC_GPIOA_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOH)
#define __HAL_RCC_AHB2_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ALL)
#define __HAL_RCC_GPIOA_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOH)
/**
* @}
*/
/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset
* @brief Force or release AHB3 peripheral reset.
* @{
*/
#if defined (DUAL_CORE)
#define __HAL_RCC_IPCC_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_IPCC)
#define __HAL_RCC_IPCC_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_IPCC)
#endif /* DUAL_CORE */
#define __HAL_RCC_AHB3_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_ALL)
#define __HAL_RCC_PKA_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_FLASH_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_FLASH)
#define __HAL_RCC_AHB3_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_ALL)
#define __HAL_RCC_PKA_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_HSEM_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_HSEM)
#define __HAL_RCC_FLASH_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_FLASH)
/**
* @}
*/
/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset
* @brief Force or release APB1 peripheral reset.
* @{
*/
#define __HAL_RCC_APB1L_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_ALL)
#define __HAL_RCC_TIM2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_SPI2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_APB1H_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_ALL)
#define __HAL_RCC_LPUART1_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_APB1_FORCE_RESET() do { \
__HAL_RCC_APB1L_FORCE_RESET();\
__HAL_RCC_APB1H_FORCE_RESET();\
} while(0U)
#define __HAL_RCC_APB1L_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_ALL)
#define __HAL_RCC_TIM2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_USART2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_SPI2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_I2C1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_APB1H_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_ALL)
#define __HAL_RCC_LPUART1_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_APB1_RELEASE_RESET() do { \
__HAL_RCC_APB1L_RELEASE_RESET();\
__HAL_RCC_APB1H_RELEASE_RESET();\
} while(0U)
/**
* @}
*/
/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset
* @brief Force or release APB2 peripheral reset.
* @{
*/
#define __HAL_RCC_APB2_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ALL)
#define __HAL_RCC_ADC_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17)
#define __HAL_RCC_APB2_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ALL)
#define __HAL_RCC_ADC_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17)
/**
* @}
*/
/** @defgroup RCC_APB3_Force_Release_Reset APB3 Peripheral Force Release Reset
* @brief Force or release APB3 peripheral reset.
* @{
*/
#define __HAL_RCC_APB3_FORCE_RESET() LL_APB3_GRP1_ForceReset(LL_APB3_GRP1_PERIPH_ALL)
#define __HAL_RCC_SUBGHZSPI_FORCE_RESET() LL_APB3_GRP1_ForceReset(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#define __HAL_RCC_APB3_RELEASE_RESET() LL_APB3_GRP1_ReleaseReset(LL_APB3_GRP1_PERIPH_ALL)
#define __HAL_RCC_SUBGHZSPI_RELEASE_RESET() LL_APB3_GRP1_ReleaseReset(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
/* Aliases used by CubeMX for HAL SUBGHZ Init, MspInit and DeInit generation */
#define __HAL_RCC_SUBGHZ_FORCE_RESET() __HAL_RCC_SUBGHZSPI_FORCE_RESET()
#define __HAL_RCC_SUBGHZ_RELEASE_RESET() __HAL_RCC_SUBGHZSPI_RELEASE_RESET()
/**
* @}
*/
/** @defgroup RCC_SUBGHZ_Force_Release_Reset SUBGHZ Radio Force Release Reset
* @brief Force or release SUBGHZ Radio reset.
* @{
*/
#define __HAL_RCC_SUBGHZ_RADIO_FORCE_RESET() SET_BIT(RCC->CSR, RCC_CSR_RFRST)
#define __HAL_RCC_SUBGHZ_RADIO_RELEASE_RESET() CLEAR_BIT(RCC->CSR, RCC_CSR_RFRST)
/**
* @}
*/
/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_CRC)
#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_CRC)
#else
#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_CRC)
#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_CRC)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#else
#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH)
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_FLASH)
#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_FLASH)
#else
#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_FLASH)
#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_FLASH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#else
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM3)
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM3)
#endif /* CORE_CM0PLUS */
#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_WWDG)
#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_WWDG)
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17)
#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17)
#else
#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM17)
#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM17)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB3_Clock_Sleep_Enable_Disable APB3 Peripheral Clock Sleep Enable Disable
* @brief Enable or disable the APB3 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_SUBGHZSPI_CLK_SLEEP_ENABLE() LL_C2_APB3_GRP1_EnableClockSleep(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#define __HAL_RCC_SUBGHZSPI_CLK_SLEEP_DISABLE() LL_C2_APB3_GRP1_DisableClockSleep(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#else
#define __HAL_RCC_SUBGHZSPI_CLK_SLEEP_ENABLE() LL_APB3_GRP1_EnableClockSleep(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#define __HAL_RCC_SUBGHZSPI_CLK_SLEEP_DISABLE() LL_APB3_GRP1_DisableClockSleep(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#endif /* CORE_CM0PLUS */
/* Aliases used by CubeMX for HAL SUBGHZ Init, MspInit and DeInit generation */
#define __HAL_RCC_SUBGHZ_CLK_SLEEP_ENABLE() __HAL_RCC_SUBGHZSPI_CLK_SLEEP_ENABLE()
#define __HAL_RCC_SUBGHZ_CLK_SLEEP_DISABLE() __HAL_RCC_SUBGHZSPI_CLK_SLEEP_DISABLE()
/**
* @}
*/
/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_CRC)
#else
#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMA1)
#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMA2)
#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1)
#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleep(LL_AHB1_GRP1_PERIPH_CRC)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH)
#else
#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() LL_AHB2_GRP1_IsEnabledClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA)
#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() LL_AHB2_GRP1_IsEnabledClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB)
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() LL_AHB2_GRP1_IsEnabledClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC)
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() LL_AHB2_GRP1_IsEnabledClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_FLASH)
#else
#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_PKA)
#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_AES)
#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_RNG)
#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_SRAM1)
#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2)
#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() LL_AHB3_GRP1_IsEnabledClockSleep(LL_AHB3_GRP1_PERIPH_FLASH)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP1_IsEnabledClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP2_IsEnabledClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP2_IsEnabledClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_ENABLED() LL_C2_APB1_GRP2_IsEnabledClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM3)
#else
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_TIM2)
#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB)
#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_USART2)
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_SPI2)
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_I2C1)
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_I2C2)
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_I2C3)
#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_DAC)
#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1)
#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP2_IsEnabledClockSleep(LL_APB1_GRP2_PERIPH_LPUART1)
#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP2_IsEnabledClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2)
#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP2_IsEnabledClockSleep(LL_APB1_GRP2_PERIPH_LPTIM3)
#endif /* CORE_CM0PLUS */
#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() LL_APB1_GRP1_IsEnabledClockSleep(LL_APB1_GRP1_PERIPH_WWDG)
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() LL_C2_APB2_GRP1_IsEnabledClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17)
#else
#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_ADC)
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_TIM1)
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_SPI1)
#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_USART1)
#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_TIM16)
#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() LL_APB2_GRP1_IsEnabledClockSleep(LL_APB2_GRP1_PERIPH_TIM17)
#endif /* CORE_CM0PLUS */
/**
* @}
*/
/** @defgroup RCC_APB3_Clock_Sleep_Enable_Disable_Status APB3 Peripheral Clock Sleep Enabled or Disabled Status
* @brief Check whether the APB3 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral clocks are enabled during SLEEP mode.
* @{
*/
#if defined(CORE_CM0PLUS)
#define __HAL_RCC_SUBGHZSPI_IS_CLK_SLEEP_ENABLED() \
LL_C2_APB3_GRP1_IsEnabledClockSleep(LL_C2_APB3_GRP1_PERIPH_SUBGHZSPI)
#else
#define __HAL_RCC_SUBGHZSPI_IS_CLK_SLEEP_ENABLED() \
LL_APB3_GRP1_IsEnabledClockSleep(LL_APB3_GRP1_PERIPH_SUBGHZSPI)
#endif /* CORE_CM0PLUS */
/* Aliases used by CubeMX for HAL SUBGHZ Init, MspInit and DeInit generation */
#define __HAL_RCC_SUBGHZ_IS_CLK_SLEEP_ENABLED() __HAL_RCC_SUBGHZSPI_IS_CLK_SLEEP_ENABLED()
/**
* @}
*/
/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset
* @{
*/
/** @brief Macros to force or release the Backup domain reset.
* @note This function resets the RTC peripheral (including the backup registers)
* and the RTC clock source selection in RCC_CSR register.
* @note The SRAM2 is not affected by this reset.
* @retval None
*/
#define __HAL_RCC_BACKUPRESET_FORCE() LL_RCC_ForceBackupDomainReset()
#define __HAL_RCC_BACKUPRESET_RELEASE() LL_RCC_ReleaseBackupDomainReset()
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
* @{
*/
/** @brief Macros to enable or disable the RTC clock.
* @note As the RTC is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the RTC
* (to be done once after reset).
* @note These macros must be used after the RTC clock source was selected.
* @retval None
*/
#define __HAL_RCC_RTC_ENABLE() LL_RCC_EnableRTC()
#define __HAL_RCC_RTC_DISABLE() LL_RCC_DisableRTC()
/**
* @}
*/
/** @brief Macros to enable the Internal High Speed oscillator (HSI).
* @note The HSI is stopped by hardware when entering STOP, STANDBY or SHUTDOWN modes.
* It is enabled by hardware to force the HSI oscillator ON when STOPWUCK=1
* or HSIASFS = 1 when leaving Stop modes, or in case of failure of the HSE
* crystal oscillator and Security System CSS is enabled.
* @note After enabling the HSI, the application software should wait on HSIRDY
* flag to be set indicating that HSI clock is stable and can be used as
* system clock source.
* @retval None
*/
#define __HAL_RCC_HSI_ENABLE() LL_RCC_HSI_Enable()
/** @brief Macro to disable the Internal High Speed oscillator (HSI).
* @note HSI can not be stopped if it is used as system clock source. In this case,
* you have to select another source of the system clock then stop the HSI.
* @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
* clock cycles.
* @retval None
*/
#define __HAL_RCC_HSI_DISABLE() LL_RCC_HSI_Disable()
/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value
* (default is RCC_HSICALIBRATION_DEFAULT).
* This parameter must be a number between Min_data=0 and Max_Data=127.
* @retval None
*/
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \
LL_RCC_HSI_SetCalibTrimming(__HSICALIBRATIONVALUE__)
/**
* @brief Macros to enable or disable the wakeup the Internal High Speed oscillator (HSI)
* in parallel to the Internal Multi Speed oscillator (MSI) used at system wakeup.
* @note The enable of this function has not effect on the HSION bit.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
#define __HAL_RCC_HSIAUTOMATIC_START_ENABLE() LL_RCC_HSI_EnableAutoFromStop()
#define __HAL_RCC_HSIAUTOMATIC_START_DISABLE() LL_RCC_HSI_DisableAutoFromStop()
/**
* @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI)
* in STOP mode to be quickly available as kernel clock for USARTs and I2Cs.
* @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication
* speed because of the HSI startup time.
* @note The enable of this function has not effect on the HSION bit.
* @retval None
*/
#define __HAL_RCC_HSISTOP_ENABLE() LL_RCC_HSI_EnableInStopMode()
#define __HAL_RCC_HSISTOP_DISABLE() LL_RCC_HSI_DisableInStopMode()
/**
* @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI).
* @note The MSI is stopped by hardware when entering STOP and STANDBY modes.
* It is used (enabled by hardware) as system clock source after
* startup from Reset, wakeup from STOP and STANDBY mode, or in case
* of failure of the HSE used directly or indirectly as system clock
* (if the Clock Security System CSS is enabled).
* @note MSI can not be stopped if it is used as system clock source.
* In this case, you have to select another source of the system
* clock then stop the MSI.
* @note After enabling the MSI, the application software should wait on
* MSIRDY flag to be set indicating that MSI clock is stable and can
* be used as system clock source.
* @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator
* clock cycles.
* @retval None
*/
#define __HAL_RCC_MSI_ENABLE() LL_RCC_MSI_Enable()
#define __HAL_RCC_MSI_DISABLE() LL_RCC_MSI_Disable()
/** @brief Macro to adjust the Internal Multi Speed oscillator (MSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal MSI RC.
* Refer to the Application Note AN3300 for more details on how to
* calibrate the MSI.
* @param __MSICALIBRATIONVALUE__ specifies the calibration trimming value
* (default is @ref RCC_MSICALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 255.
* @retval None
*/
#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(__MSICALIBRATIONVALUE__) \
LL_RCC_MSI_SetCalibTrimming(__MSICALIBRATIONVALUE__)
/**
* @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range in run mode
* @note After restart from Reset , the MSI clock is around 4 MHz.
* After stop the startup clock can be MSI (at any of its possible
* frequencies, the one that was used before entering stop mode) or HSI.
* After Standby its frequency can be selected between 4 possible values
* (1, 2, 4 or 8 MHz).
* @note MSIRANGE can be modified when MSI is OFF (MSION=0) or when MSI is ready
* (MSIRDY=1).
* @note The MSI clock range after reset can be modified on the fly.
* @param __MSIRANGEVALUE__ specifies the MSI clock range.
* This parameter must be one of the following values:
* @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz
* @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz
* @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz
* @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz
* @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
* @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz
* @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset)
* @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
* @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz
* @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz
* @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz
* @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz
* @retval None
*/
#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) do { \
SET_BIT(RCC->CR, RCC_CR_MSIRGSEL); \
MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, (__MSIRANGEVALUE__)); \
} while(0)
/**
* @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range after Standby mode
* After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz).
* @param __MSIRANGEVALUE__ specifies the MSI clock range.
* This parameter must be one of the following values:
* @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
* @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz
* @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset)
* @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
* @retval None
*/
#define __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(__MSIRANGEVALUE__) \
MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, (__MSIRANGEVALUE__) << 4U)
/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode
* @retval MSI clock range.
* This parameter must be one of the following values:
* @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz
* @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz
* @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz
* @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz
* @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
* @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz
* @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset)
* @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
* @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz
* @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz
* @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz
* @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz
*/
#define __HAL_RCC_GET_MSI_RANGE() ((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) != 0U) ? \
(uint32_t)(READ_BIT(RCC->CR, RCC_CR_MSIRANGE)) : \
(uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> 4))
/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
* @note After enabling the LSI, the application software should wait on
* LSIRDY flag to be set indicating that LSI clock is stable and can
* be used to clock the IWDG and/or the RTC.
* @note LSI can not be disabled if the IWDG is running.
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
* clock cycles.
* @retval None
*/
#define __HAL_RCC_LSI_ENABLE() LL_RCC_LSI_Enable()
#define __HAL_RCC_LSI_DISABLE() LL_RCC_LSI_Disable()
/**
* @brief Macro to configure the External High Speed oscillator (HSE).
* @note Transition RCC_HSE_BYPASS_PWR to RCC_HSE_ON and RCC_HSE_ON to
* RCC_HSE_BYPASS_PWR are not supported by this macro. User should
* request a transition to RCC_HSE_OFF first and then RCC_HSE_ON or
* RCC_HSE_BYPASS_PWR.
* @note After enabling the HSE (RCC_HSE_ON, RCC_HSE_BYPASS_PWR),
* the application software should wait on HSERDY flag to be set indicating
* that HSE clock is stable and can be used to clock the PLL and/or system clock.
* @note HSE state can not be changed if it is used directly or through the
* PLL as system clock. In this case, you have to select another source
* of the system clock then change the HSE state (ex. disable it).
* @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
* @note PB0 must be configured in analog mode prior enabling the HSE with
* RCC_HSE_BYPASS_PWR.
* @param __STATE__ specifies the new state of the HSE.
* This parameter can be one of the following values:
* @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag
* goes low after 6 HSE oscillator clock cycles.
* @arg @ref RCC_HSE_ON Turn ON the HSE oscillator.
* @arg @ref RCC_HSE_BYPASS_PWR HSE32 driven from an external TCXO powered by the PB0-VDDTCXO pin.
* @retval None
*/
#define __HAL_RCC_HSE_CONFIG(__STATE__) do { \
if((__STATE__) == RCC_HSE_ON) \
{ \
LL_RCC_HSE_Enable(); \
} \
else if((__STATE__) == RCC_HSE_BYPASS_PWR) \
{ \
LL_RCC_HSE_EnableTcxo(); \
LL_RCC_HSE_Enable(); \
} \
else \
{ \
LL_RCC_HSE_Disable(); \
LL_RCC_HSE_DisableTcxo(); \
} \
} while(0U)
/** @brief Macros to enable or disable the HSE Prescaler
* @note HSE prescaler shall be enabled when HSE is used as
* system clock source and Voltage scaling range 1
* (Low-power range) is selected.
* @retval None
*/
#define __HAL_RCC_HSE_DIV2_ENABLE() LL_RCC_HSE_EnableDiv2()
#define __HAL_RCC_HSE_DIV2_DISABLE() LL_RCC_HSE_DisableDiv2()
/**
* @brief Macro to configure the External Low Speed oscillator (LSE).
* @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
* supported by this macro. User should request a transition to LSE Off
* first and then LSE On or LSE Bypass.
* @note As the LSE is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
* (to be done once after reset).
* @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
* software should wait on LSERDY flag to be set indicating that LSE clock
* is stable and can be used to clock the RTC.
* @param __STATE__ specifies the new state of the LSE.
* This parameter can be one of the following values:
* @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after
* 6 LSE oscillator clock cycles.
* @arg @ref RCC_LSE_ON Turn ON the LSE oscillator.
* @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
* @retval None
*/
#define __HAL_RCC_LSE_CONFIG(__STATE__) do { \
if((__STATE__) == RCC_LSE_ON) \
{ \
LL_RCC_LSE_Enable(); \
} \
else if((__STATE__) == RCC_LSE_BYPASS) \
{ \
LL_RCC_LSE_EnableBypass(); \
LL_RCC_LSE_Enable(); \
} \
else \
{ \
LL_RCC_LSE_Disable(); \
LL_RCC_LSE_DisableBypass(); \
} \
} while(0U)
/** @brief Macro to configure the RTC clock (RTCCLK).
* @note As the RTC clock configuration bits are in the Backup domain and write
* access is denied to this domain after reset, you have to enable write
* access using the Power Backup Access macro before to configure
* the RTC clock source (to be done once after reset).
* @note Once the RTC clock is configured it cannot be changed unless the
* Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
* a Power On Reset (POR).
*
* @param __RTC_CLKSOURCE__ specifies the RTC clock source.
* This parameter can be one of the following values:*
* @arg @ref RCC_RTCCLKSOURCE_NONE none clock selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected
*
* @note If the LSE or LSI is used as RTC clock source, the RTC continues to
* work in STOP and STANDBY modes, and can be used as wakeup source.
* However, when the HSE clock is used as RTC clock source, the RTC
* cannot be used in STOP and STANDBY modes.
* @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
* RTC clock source).
* @retval None
*/
#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) LL_RCC_SetRTCClockSource(__RTC_CLKSOURCE__)
/** @brief Macro to get the RTC clock source.
* @retval The returned value can be one of the following:
* @arg @ref RCC_RTCCLKSOURCE_NONE none clock selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock.
* @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected
*/
#define __HAL_RCC_GET_RTC_SOURCE() LL_RCC_GetRTCClockSource()
/** @brief Macros to enable or disable the main PLL.
* @note After enabling the main PLL, the application software should wait on
* PLLRDY flag to be set indicating that PLL clock is stable and can
* be used as system clock source.
* @note The main PLL can not be disabled if it is used as system clock source
* @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
* @retval None
*/
#define __HAL_RCC_PLL_ENABLE() LL_RCC_PLL_Enable()
#define __HAL_RCC_PLL_DISABLE() LL_RCC_PLL_Disable()
/** @brief Macro to configure the PLL clock source.
* @note This function must be used only when the main PLL is disabled.
* @param __PLLSOURCE__ specifies the PLL entry clock source.
* This parameter can be one of the following values:
* @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
* @retval None
*
*/
#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
/**
* @brief Macro to configure the main PLL clock source, multiplication and division factors.
* @note This function must be used only when the main PLL is disabled.
*
* @param __PLLSOURCE__ specifies the PLL entry clock source.
* This parameter can be one of the following values:
* @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
* @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
*
* @param __PLLM__ specifies the division factor for PLL VCO input clock.
* This parameter must be a value of @ref RCC_PLLM_Clock_Divider.
* @note You have to set the PLLM parameter correctly to ensure that the VCO input
* frequency ranges from 2.66 to 16 MHz. It is recommended to select a frequency
* of 16 MHz to limit PLL jitter.
*
* @param __PLLN__ specifies the multiplication factor for PLL VCO output clock.
* This parameter must be a number between 6 and 127.
* @note You have to set the PLLN parameter correctly to ensure that the VCO
* output frequency is between 96 and 344 MHz.
*
* @param __PLLP__ specifies the division factor for ADC clock.
* This parameter must be a value of @ref RCC_PLLP_Clock_Divider.
*
* @param __PLLQ__ specifies the division factor for I2S2 and RNG clocks.
* This parameter must be a value of @ref RCC_PLLQ_Clock_Divider
*
* @note RNG need a frequency lower than or equal to 48 MHz to work correctly.
*
* @param __PLLR__ specifies the division factor for the main system clock.
* This parameter must be a value of @ref RCC_PLLR_Clock_Divider
* @note You have to set the PLLR parameter correctly to not exceed 48 MHZ.
* @retval None
*/
#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \
MODIFY_REG(RCC->PLLCFGR, \
(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \
RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \
((uint32_t) (__PLLSOURCE__) | \
(uint32_t) (__PLLM__) | \
(uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
(uint32_t) (__PLLP__) | \
(uint32_t) (__PLLQ__) | \
(uint32_t) (__PLLR__)))
/** @brief Macro to get the oscillator used as PLL clock source.
* @retval The oscillator used as PLL clock source. The returned value can be one
* of the following:
* @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source.
* @arg @ref RCC_PLLSOURCE_MSI MSI oscillator is used as PLL clock source.
* @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source.
* @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source.
*/
#define __HAL_RCC_GET_PLL_OSCSOURCE() LL_RCC_PLL_GetMainSource()
/**
* @brief Enable or disable each clock output (RCC_PLL_SYSCLK, RCC_PLL_I2S2CLK, RCC_PLL_RNGCLK, RCC_PLL_ADCCLK)
* @note Enabling/disabling clock outputs RCC_PLL_I2S2CLK, RCC_PLL_RNGCLK and RCC_PLL_ADCCLK can be done at anytime
* without the need to stop the PLL in order to save power. But RCC_PLL_SYSCLK cannot
* be stopped if used as System Clock.
* @param __PLLCLOCKOUT__ specifies the PLL clock to be output.
* This parameter can be one or a combination of the following values:
* @arg @ref RCC_PLL_ADCCLK This clock is used to generate the clock for ADC
* @arg @ref RCC_PLL_I2S2CLK This Clock is used to generate the clock for the I2S
* @arg @ref RCC_PLL_RNGCLK This clock is used to generate the clock for RNG
* @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 48 MHz)
* @retval None
*/
#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__))
#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__))
/**
* @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_I2S2CLK, RCC_PLL_RNGCLK, RCC_PLL_ADCCLK)
* @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked.
* This parameter can be one of the following values:
* @arg @ref RCC_PLL_ADCCLK same
* @arg @ref RCC_PLL_I2S2CLK This Clock is used to generate the clock for the I2S
* @arg @ref RCC_PLL_RNGCLK This clock is used to generate the clock for RNG
* @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 48 MHz)
* @retval SET / RESET
*/
#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__))
/**
* @brief Macro to configure the system clock source.
* @param __SYSCLKSOURCE__ specifies the system clock source.
* This parameter can be one of the following values:
* @arg @ref RCC_SYSCLKSOURCE_MSI MSI oscillator is used as system clock source.
* @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
* @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
* @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
* @retval None
*/
#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) LL_RCC_SetSysClkSource(__SYSCLKSOURCE__)
/** @brief Macro to get the clock source used as system clock.
* @retval The clock source used as system clock. The returned value can be one
* of the following:
* @arg @ref RCC_SYSCLKSOURCE_STATUS_MSI MSI used as system clock.
* @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock.
* @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock.
* @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock.
*/
#define __HAL_RCC_GET_SYSCLK_SOURCE() LL_RCC_GetSysClkSource()
/**
* @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
* @note As the LSE is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
* (to be done once after reset).
* @param __LSEDRIVE__ specifies the new state of the LSE drive capability.
* This parameter can be one of the following values:
* @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
* @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
* @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
* @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
* @retval None
*/
#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) LL_RCC_LSE_SetDriveCapability(__LSEDRIVE__)
/**
* @brief Macro to configure the wake up from stop clock.
* @param __STOPWUCLK__ specifies the clock source used after wake up from stop.
* This parameter can be one of the following values:
* @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source
* @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source
* @retval None
*/
#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) LL_RCC_SetClkAfterWakeFromStop(__STOPWUCLK__)
/** @brief Macro to configure the MCO clock.
* @param __MCOCLKSOURCE__ specifies the MCO clock source.
* This parameter can be one of the following values:
* @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled
* @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee
* @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_PLLPCLK main PLLP clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_PLLQCLK main PLLQ clock selected as MCO source
* @param __MCODIV__ specifies the MCO clock prescaler.
* This parameter can be one of the following values:
* @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1
* @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2
* @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4
* @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
* @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
*/
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) LL_RCC_ConfigMCO((__MCOCLKSOURCE__), (__MCODIV__))
/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
*/
/** @brief Enable RCC interrupt.
* @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg @ref RCC_IT_LSIRDY LSI ready interrupt enable
* @arg @ref RCC_IT_LSERDY LSE ready interrupt enable
* @arg @ref RCC_IT_MSIRDY HSI ready interrupt enable
* @arg @ref RCC_IT_HSIRDY HSI ready interrupt enable
* @arg @ref RCC_IT_HSERDY HSE ready interrupt enable
* @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable
* @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable
* @retval None
*/
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__))
/** @brief Disable RCC interrupt.
* @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg @ref RCC_IT_LSIRDY LSI ready interrupt enable
* @arg @ref RCC_IT_LSERDY LSE ready interrupt enable
* @arg @ref RCC_IT_MSIRDY HSI ready interrupt enable
* @arg @ref RCC_IT_HSIRDY HSI ready interrupt enable
* @arg @ref RCC_IT_HSERDY HSE ready interrupt enable
* @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable
* @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable
* @retval None
*/
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__))
/** @brief Clear RCC interrupt pending bits (Perform Byte access to RCC_CICR[17:0]
* bits to clear the selected interrupt pending bits.
* @param __INTERRUPT__ specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg @ref RCC_IT_LSIRDY LSI ready interrupt clear
* @arg @ref RCC_IT_LSERDY LSE ready interrupt clear
* @arg @ref RCC_IT_MSIRDY HSI ready interrupt clear
* @arg @ref RCC_IT_HSIRDY HSI ready interrupt clear
* @arg @ref RCC_IT_HSERDY HSE ready interrupt clear
* @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt clear
* @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt clear
* @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt clear
*/
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__))
/** @brief Check whether the RCC interrupt has occurred or not.
* @param __INTERRUPT__ specifies the RCC interrupt source to check.
* This parameter can be one of the following values:
* @arg @ref RCC_IT_LSIRDY LSI ready interrupt flag
* @arg @ref RCC_IT_LSERDY LSE ready interrupt flag
* @arg @ref RCC_IT_MSIRDY HSI ready interrupt flag
* @arg @ref RCC_IT_HSIRDY HSI ready interrupt flag
* @arg @ref RCC_IT_HSERDY HSE ready interrupt flag
* @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt flag
* @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt flag
* @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt flag
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
*/
#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Set RMVF bit to clear the reset flags.
* The reset flags are: LPWRRSTF, WWDGRSTF, IWDGRSTF, SFTRSTF,
BORRSTF, PINRSTF, OBLRSTF, and RFILARSTF.
* @retval None
*/
#define __HAL_RCC_CLEAR_RESET_FLAGS() LL_RCC_ClearResetFlags()
/** @brief Check whether the selected RCC flag is set or not.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready
* @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready
* @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready
* @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready
* @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready
* @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection
* @arg @ref RCC_FLAG_LSESYSRDY LSE system clock ready flag
* @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready
* @arg @ref RCC_FLAG_RFRST Sub-GHz radio reset flag
* @arg @ref RCC_FLAG_RFILARSTF Sub-GHz radio illegal command flag
* @arg @ref RCC_FLAG_BORRST BOR reset
* @arg @ref RCC_FLAG_OBLRST OBLRST reset
* @arg @ref RCC_FLAG_PINRST Pin reset
* @arg @ref RCC_FLAG_SFTRST Software reset
* @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset
* @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset
* @arg @ref RCC_FLAG_LPWRRST Low Power reset
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_RCC_GET_FLAG(__FLAG__) \
(((((((__FLAG__) >> REG_INDEX_POS) == CR_REG_INDEX) ? RCC->CR : \
((((__FLAG__) >> REG_INDEX_POS) == BDCR_REG_INDEX) ? RCC->BDCR : \
((((__FLAG__) >> REG_INDEX_POS) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \
(1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1UL : 0UL)
/**
* @}
*/
/**
* @}
*/
/* Include RCC HAL Extended module */
#include "stm32wlxx_hal_rcc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RCC_Exported_Functions
* @{
*/
/** @addtogroup RCC_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_RCC_DeInit(void);
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
/**
* @}
*/
/** @addtogroup RCC_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions **********************************************/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
void HAL_RCC_EnableCSS(void);
uint32_t HAL_RCC_GetSysClockFreq(void);
uint32_t HAL_RCC_GetHCLKFreq(void);
#if defined(DUAL_CORE)
uint32_t HAL_RCC_GetHCLK2Freq(void);
#endif /* DUAL_CORE */
uint32_t HAL_RCC_GetHCLK3Freq(void);
uint32_t HAL_RCC_GetPCLK1Freq(void);
uint32_t HAL_RCC_GetPCLK2Freq(void);
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
/* LSE & HSE CSS NMI IRQ handler */
void HAL_RCC_NMI_IRQHandler(void);
/* User Callbacks in non blocking mode (IT mode) */
void HAL_RCC_CSSCallback(void);
uint32_t HAL_RCC_GetResetSource(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32WLxx_HAL_RCC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/