/**
* \file chacha20.h
*
* \brief This file contains ChaCha20 definitions and functions.
*
* ChaCha20 is a stream cipher that can encrypt and decrypt
* information. ChaCha was created by Daniel Bernstein as a variant of
* its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf
* ChaCha20 is the variant with 20 rounds, that was also standardized
* in RFC 7539.
*
* \author Daniel King <damaki.gh@gmail.com>
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_CHACHA20_H
#define MBEDTLS_CHACHA20_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stdint.h>
#include <stddef.h>
/**
* \addtogroup mbedtls
* \{
* \defgroup mbedtls_chacha20_module ChaCha20
* \{
*/
#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /**< Invalid input parameter(s). */
/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
* used. */
#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */
/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED -0x0055 /**< Chacha20 hardware accelerator failed. */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_CHACHA20_ALT)
typedef struct mbedtls_chacha20_context
{
uint32_t state[16]; /*! The state (before round operations). */
uint8_t keystream8[64]; /*! Leftover keystream bytes. */
size_t keystream_bytes_used; /*! Number of keystream bytes already used. */
}
mbedtls_chacha20_context;
#else /* MBEDTLS_CHACHA20_ALT */
#include "chacha20_alt.h"
#endif /* MBEDTLS_CHACHA20_ALT */
/**
* \brief This function initializes the specified ChaCha20 context.
*
* It must be the first API called before using
* the context.
*
* It is usually followed by calls to
* \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts(), then one or more calls to
* to \c mbedtls_chacha20_update(), and finally to
* \c mbedtls_chacha20_free().
*
* \param ctx The ChaCha20 context to initialize.
* This must not be \c NULL.
*/
void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );
/**
* \brief This function releases and clears the specified
* ChaCha20 context.
*
* \param ctx The ChaCha20 context to clear. This may be \c NULL,
* in which case this function is a no-op. If it is not
* \c NULL, it must point to an initialized context.
*
*/
void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );
/**
* \brief This function sets the encryption/decryption key.
*
* \note After using this function, you must also call
* \c mbedtls_chacha20_starts() to set a nonce before you
* start encrypting/decrypting data with
* \c mbedtls_chacha_update().
*
* \param ctx The ChaCha20 context to which the key should be bound.
* It must be initialized.
* \param key The encryption/decryption key. This must be \c 32 Bytes
* in length.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
*/
int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
const unsigned char key[32] );
/**
* \brief This function sets the nonce and initial counter value.
*
* \note A ChaCha20 context can be re-used with the same key by
* calling this function to change the nonce.
*
* \warning You must never use the same nonce twice with the same key.
* This would void any confidentiality guarantees for the
* messages encrypted with the same nonce and key.
*
* \param ctx The ChaCha20 context to which the nonce should be bound.
* It must be initialized and bound to a key.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
* NULL.
*/
int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
const unsigned char nonce[12],
uint32_t counter );
/**
* \brief This function encrypts or decrypts data.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \note \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts() must be called at least once
* to setup the context before this function can be called.
*
* \note This function can be called multiple times in a row in
* order to encrypt of decrypt data piecewise with the same
* key and nonce.
*
* \param ctx The ChaCha20 context to use for encryption or decryption.
* It must be initialized and bound to a key and nonce.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
size_t size,
const unsigned char *input,
unsigned char *output );
/**
* \brief This function encrypts or decrypts data with ChaCha20 and
* the given key and nonce.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \warning You must never use the same (key, nonce) pair more than
* once. This would void any confidentiality guarantees for
* the messages encrypted with the same nonce and key.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \param key The encryption/decryption key.
* This must be \c 32 Bytes in length.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_crypt( const unsigned char key[32],
const unsigned char nonce[12],
uint32_t counter,
size_t size,
const unsigned char* input,
unsigned char* output );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The ChaCha20 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_chacha20_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
/// \}
/// \}
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_CHACHA20_H */
