/**
* \file sha256.h
*
* \brief This file contains SHA-224 and SHA-256 definitions and functions.
*
* The Secure Hash Algorithms 224 and 256 (SHA-224 and SHA-256) cryptographic
* hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_SHA256_H
#define MBEDTLS_SHA256_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
/**
* \addtogroup mbedtls
* \{
* \defgroup mbedtls_sha256_module SHA-224 and SHA-256
* \{
*/
/* MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED -0x0037 /**< SHA-256 hardware accelerator failed */
#define MBEDTLS_ERR_SHA256_BAD_INPUT_DATA -0x0074 /**< SHA-256 input data was malformed. */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_SHA256_ALT)
// Regular implementation
//
/**
* \brief The SHA-256 context structure.
*
* The structure is used both for SHA-256 and for SHA-224
* checksum calculations. The choice between these two is
* made in the call to mbedtls_sha256_starts_ret().
*/
typedef struct mbedtls_sha256_context
{
uint32_t total[2]; /*!< The number of Bytes processed. */
uint32_t state[8]; /*!< The intermediate digest state. */
unsigned char buffer[64]; /*!< The data block being processed. */
int is224; /*!< Determines which function to use:
0: Use SHA-256, or 1: Use SHA-224. */
}
mbedtls_sha256_context;
#else /* MBEDTLS_SHA256_ALT */
#include "sha256_alt.h"
#endif /* MBEDTLS_SHA256_ALT */
/**
* \brief This function initializes a SHA-256 context.
*
* \param ctx The SHA-256 context to initialize. This must not be \c NULL.
*/
void mbedtls_sha256_init( mbedtls_sha256_context *ctx );
/**
* \brief This function clears a SHA-256 context.
*
* \param ctx The SHA-256 context to clear. This may be \c NULL, in which
* case this function returns immediately. If it is not \c NULL,
* it must point to an initialized SHA-256 context.
*/
void mbedtls_sha256_free( mbedtls_sha256_context *ctx );
/**
* \brief This function clones the state of a SHA-256 context.
*
* \param dst The destination context. This must be initialized.
* \param src The context to clone. This must be initialized.
*/
void mbedtls_sha256_clone( mbedtls_sha256_context *dst,
const mbedtls_sha256_context *src );
/**
* \brief This function starts a SHA-224 or SHA-256 checksum
* calculation.
*
* \param ctx The context to use. This must be initialized.
* \param is224 This determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_starts_ret( mbedtls_sha256_context *ctx, int is224 );
/**
* \brief This function feeds an input buffer into an ongoing
* SHA-256 checksum calculation.
*
* \param ctx The SHA-256 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_update_ret( mbedtls_sha256_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function finishes the SHA-256 operation, and writes
* the result to the output buffer.
*
* \param ctx The SHA-256 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-224 or SHA-256 checksum result.
* This must be a writable buffer of length \c 32 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_finish_ret( mbedtls_sha256_context *ctx,
unsigned char output[32] );
/**
* \brief This function processes a single data block within
* the ongoing SHA-256 computation. This function is for
* internal use only.
*
* \param ctx The SHA-256 context. This must be initialized.
* \param data The buffer holding one block of data. This must
* be a readable buffer of length \c 64 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_internal_sha256_process( mbedtls_sha256_context *ctx,
const unsigned char data[64] );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function starts a SHA-224 or SHA-256 checksum
* calculation.
*
* \deprecated Superseded by mbedtls_sha256_starts_ret() in 2.7.0.
*
* \param ctx The context to use. This must be initialized.
* \param is224 Determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_starts( mbedtls_sha256_context *ctx,
int is224 );
/**
* \brief This function feeds an input buffer into an ongoing
* SHA-256 checksum calculation.
*
* \deprecated Superseded by mbedtls_sha256_update_ret() in 2.7.0.
*
* \param ctx The SHA-256 context to use. This must be
* initialized and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_update( mbedtls_sha256_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function finishes the SHA-256 operation, and writes
* the result to the output buffer.
*
* \deprecated Superseded by mbedtls_sha256_finish_ret() in 2.7.0.
*
* \param ctx The SHA-256 context. This must be initialized and
* have a hash operation started.
* \param output The SHA-224 or SHA-256 checksum result. This must be
* a writable buffer of length \c 32 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_finish( mbedtls_sha256_context *ctx,
unsigned char output[32] );
/**
* \brief This function processes a single data block within
* the ongoing SHA-256 computation. This function is for
* internal use only.
*
* \deprecated Superseded by mbedtls_internal_sha256_process() in 2.7.0.
*
* \param ctx The SHA-256 context. This must be initialized.
* \param data The buffer holding one block of data. This must be
* a readable buffer of size \c 64 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_process( mbedtls_sha256_context *ctx,
const unsigned char data[64] );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
/**
* \brief This function calculates the SHA-224 or SHA-256
* checksum of a buffer.
*
* The function allocates the context, performs the
* calculation, and frees the context.
*
* The SHA-256 result is calculated as
* output = SHA-256(input buffer).
*
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-224 or SHA-256 checksum result. This must
* be a writable buffer of length \c 32 Bytes.
* \param is224 Determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*/
int mbedtls_sha256_ret( const unsigned char *input,
size_t ilen,
unsigned char output[32],
int is224 );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function calculates the SHA-224 or SHA-256 checksum
* of a buffer.
*
* The function allocates the context, performs the
* calculation, and frees the context.
*
* The SHA-256 result is calculated as
* output = SHA-256(input buffer).
*
* \deprecated Superseded by mbedtls_sha256_ret() in 2.7.0.
*
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-224 or SHA-256 checksum result. This must be
* a writable buffer of length \c 32 Bytes.
* \param is224 Determines which function to use. This must be either
* \c 0 for SHA-256, or \c 1 for SHA-224.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input,
size_t ilen,
unsigned char output[32],
int is224 );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The SHA-224 and SHA-256 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_sha256_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
/// \}
/// \}
#endif /* mbedtls_sha256.h */
