/**
* \file sha512.h
* \brief This file contains SHA-384 and SHA-512 definitions and functions.
*
* The Secure Hash Algorithms 384 and 512 (SHA-384 and SHA-512) cryptographic
* hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_SHA512_H
#define MBEDTLS_SHA512_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
/**
* \addtogroup mbedtls
* \{
* \defgroup mbedtls_sha512_module SHA-384 and SHA-512
* \{
*/
/* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED -0x0039 /**< SHA-512 hardware accelerator failed */
#define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA -0x0075 /**< SHA-512 input data was malformed. */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_SHA512_ALT)
// Regular implementation
//
/**
* \brief The SHA-512 context structure.
*
* The structure is used both for SHA-384 and for SHA-512
* checksum calculations. The choice between these two is
* made in the call to mbedtls_sha512_starts_ret().
*/
typedef struct mbedtls_sha512_context
{
uint64_t total[2]; /*!< The number of Bytes processed. */
uint64_t state[8]; /*!< The intermediate digest state. */
unsigned char buffer[128]; /*!< The data block being processed. */
#if !defined(MBEDTLS_SHA512_NO_SHA384)
int is384; /*!< Determines which function to use:
0: Use SHA-512, or 1: Use SHA-384. */
#endif
}
mbedtls_sha512_context;
#else /* MBEDTLS_SHA512_ALT */
#include "sha512_alt.h"
#endif /* MBEDTLS_SHA512_ALT */
/**
* \brief This function initializes a SHA-512 context.
*
* \param ctx The SHA-512 context to initialize. This must
* not be \c NULL.
*/
void mbedtls_sha512_init( mbedtls_sha512_context *ctx );
/**
* \brief This function clears a SHA-512 context.
*
* \param ctx The SHA-512 context to clear. This may be \c NULL,
* in which case this function does nothing. If it
* is not \c NULL, it must point to an initialized
* SHA-512 context.
*/
void mbedtls_sha512_free( mbedtls_sha512_context *ctx );
/**
* \brief This function clones the state of a SHA-512 context.
*
* \param dst The destination context. This must be initialized.
* \param src The context to clone. This must be initialized.
*/
void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
const mbedtls_sha512_context *src );
/**
* \brief This function starts a SHA-384 or SHA-512 checksum
* calculation.
*
* \param ctx The SHA-512 context to use. This must be initialized.
* \param is384 Determines which function to use. This must be
* either \c 0 for SHA-512, or \c 1 for SHA-384.
*
* \note When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
* be \c 0, or the function will return
* #MBEDTLS_ERR_SHA512_BAD_INPUT_DATA.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );
/**
* \brief This function feeds an input buffer into an ongoing
* SHA-512 checksum calculation.
*
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the input data. This must
* be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function finishes the SHA-512 operation, and writes
* the result to the output buffer.
*
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-384 or SHA-512 checksum result.
* This must be a writable buffer of length \c 64 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
unsigned char output[64] );
/**
* \brief This function processes a single data block within
* the ongoing SHA-512 computation.
* This function is for internal use only.
*
* \param ctx The SHA-512 context. This must be initialized.
* \param data The buffer holding one block of data. This
* must be a readable buffer of length \c 128 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
const unsigned char data[128] );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function starts a SHA-384 or SHA-512 checksum
* calculation.
*
* \deprecated Superseded by mbedtls_sha512_starts_ret() in 2.7.0
*
* \param ctx The SHA-512 context to use. This must be initialized.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512 or \c 1 for SHA-384.
*
* \note When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
* be \c 0, or the function will fail to work.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
int is384 );
/**
* \brief This function feeds an input buffer into an ongoing
* SHA-512 checksum calculation.
*
* \deprecated Superseded by mbedtls_sha512_update_ret() in 2.7.0.
*
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function finishes the SHA-512 operation, and writes
* the result to the output buffer.
*
* \deprecated Superseded by mbedtls_sha512_finish_ret() in 2.7.0.
*
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-384 or SHA-512 checksum result. This must
* be a writable buffer of size \c 64 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
unsigned char output[64] );
/**
* \brief This function processes a single data block within
* the ongoing SHA-512 computation. This function is for
* internal use only.
*
* \deprecated Superseded by mbedtls_internal_sha512_process() in 2.7.0.
*
* \param ctx The SHA-512 context. This must be initialized.
* \param data The buffer holding one block of data. This must be
* a readable buffer of length \c 128 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_process(
mbedtls_sha512_context *ctx,
const unsigned char data[128] );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
/**
* \brief This function calculates the SHA-512 or SHA-384
* checksum of a buffer.
*
* The function allocates the context, performs the
* calculation, and frees the context.
*
* The SHA-512 result is calculated as
* output = SHA-512(input buffer).
*
* \param input The buffer holding the input data. This must be
* a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-384 or SHA-512 checksum result.
* This must be a writable buffer of length \c 64 Bytes.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512, or \c 1 for SHA-384.
*
* \note When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
* be \c 0, or the function will return
* #MBEDTLS_ERR_SHA512_BAD_INPUT_DATA.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_ret( const unsigned char *input,
size_t ilen,
unsigned char output[64],
int is384 );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function calculates the SHA-512 or SHA-384
* checksum of a buffer.
*
* The function allocates the context, performs the
* calculation, and frees the context.
*
* The SHA-512 result is calculated as
* output = SHA-512(input buffer).
*
* \deprecated Superseded by mbedtls_sha512_ret() in 2.7.0
*
* \param input The buffer holding the data. This must be a
* readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-384 or SHA-512 checksum result. This must
* be a writable buffer of length \c 64 Bytes.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512, or \c 1 for SHA-384.
*
* \note When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
* be \c 0, or the function will fail to work.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
size_t ilen,
unsigned char output[64],
int is384 );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The SHA-384 or SHA-512 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_sha512_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
/// \}
/// \}
#endif /* mbedtls_sha512.h */
