/* mbed Microcontroller Library
* Copyright (c) 2006-2016 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* mbed OS boot sequence
*
* Most of mbed supported targets use default ARM Cortex M boot approach, where the core starts executing reset vector
* after power up. Reset ISR is defined for each target by the vendor (basing on CMSIS template). Reset vector is
* responsible for low level platform init and then calling in libc (__main). Depending on compiler and version of C
* library, predefined function will be called which is implemented by mbed OS.
*
* There's number of functions, vendor and users can provide to setup the platform and/or inject a code to be executed
* before main():
* * Reset vector and SystemInit: Reset vector should do low level core and board initialization.
* * mbed_sdk_init: Higher level board init and making sure the board is ready for the mbed OS.
* * mbed_main: User's code to be executed before main().
* * main: Standard application code.
*
* Detailed boot procedures:
*
* For ARMCC:
* ==========
*
* Reset (TARGET)
* -> SystemInit (TARGET)
* -> __main (LIBC)
* -> __rt_entry (MBED: rtos/mbed_boot.c)
* -> __user_setup_stackheap (LIBC)
* -> mbed_set_stack_heap (MBED: rtos/mbed_boot.c)
* -> mbed_cpy_nvic (MBED: rtos/mbed_boot.c)
* -> mbed_sdk_init (TARGET)
* -> _platform_post_stackheap_init (RTX)
* -> osKernelInitialize (RTX)
* -> mbed_start_main (MBED: rtos/mbed_boot.c)
* -> osThreadNew (RTX)
* -> pre_main(MBED: rtos/mbed_boot.c)
* -> __rt_lib_init (LIBC)
* -> $Sub$$main (MBED: rtos/mbed_boot.c)
* -> mbed_main (MBED: rtos/mbed_boot.c)
* -> main (APP)
* -> osKernelStart (RTX)
*
* In addition to the above, libc will use functions defined by RTX: __user_perthread_libspace, _mutex_initialize,
* _mutex_acquire, _mutex_release, _mutex_free for details consult: ARM C and C++ Libraries and Floating-Point
* Support User Guide.
*
* For MICROLIB:
* ==========
*
* Reset (TARGET)
* -> SystemInit (TARGET)
* -> __main (LIBC)
* -> _main_init (MBED: rtos/mbed_boot.c)
* -> mbed_set_stack_heap (MBED: rtos/mbed_boot.c)
* -> mbed_cpy_nvic (MBED: rtos/mbed_boot.c)
* -> mbed_sdk_init (TARGET)
* -> osKernelInitialize (RTX)
* -> mbed_start_main (MBED: rtos/mbed_boot.c)
* -> osThreadNew (RTX)
* -> pre_main(MBED: rtos/mbed_boot.c)
* -> __cpp_initialize__aeabi_ (LIBC)
* -> $Sub$$main (MBED: rtos/mbed_boot.c)
* -> mbed_main (MBED: rtos/mbed_boot.c)
* -> main (APP)
* -> osKernelStart (RTX)
*
* For GCC:
* ========
*
* Reset (TARGET)
* -> SystemInit (TARGET)
* -> __main (LIBC)
* -> software_init_hook (MBED: rtos/mbed_boot.c)
* -> mbed_set_stack_heap (MBED: rtos/mbed_boot.c)
* -> mbed_cpy_nvic (MBED: rtos/mbed_boot.c)
* -> mbed_sdk_init (TARGET)
* -> osKernelInitialize (RTX)
* -> mbed_start_main (MBED: rtos/mbed_boot.c)
* -> osThreadNew (RTX)
* -> pre_main(MBED: rtos/mbed_boot.c)
* -> __libc_init_array (LIBC)
* -> __wrap_main (MBED: rtos/mbed_boot.c)
* -> mbed_main (MBED: rtos/mbed_boot.c)
* -> __real_main (APP)
* -> osKernelStart (RTX)
*
* For IAR:
* ========
*
* Reset (TARGET)
* -> SystemInit (TARGET)
* -> __iar_program_start
* -> __iar_init_core
* -> __iar_init_core
* -> __iar_init_vfp
* -> __low_level_init
* -> __iar_data_init3
* -> mbed_cpy_nvic (MBED: rtos/mbed_boot.c)
* -> mbed_sdk_init (TARGET)
* -> mbed_set_stack_heap (MBED: rtos/mbed_boot.c)
* -> osKernelInitialize (RTX)
* -> mbed_start_main (MBED: rtos/mbed_boot.c)
* -> osThreadNew (RTX)
* -> pre_main(MBED: rtos/mbed_boot.c)
* -> __iar_dynamic_initialization
* -> main
* -> osKernelStart (RTX)
*
* Other notes:
*
* * In addition to the above, libc will use functions defined in mbed_boot.c: __rtos_malloc_lock/unlock,
* __rtos_env_lock/unlock.
*
* * First step after the execution is passed to mbed, software_init_hook for GCC and __rt_entry for ARMC is to
* initialize heap.
*
* Memory layout notes:
* ====================
*
* IAR Default Memory layout notes:
* -Heap defined by "HEAP" region in .icf file
* -Interrupt stack defined by "CSTACK" region in .icf file
* -Value INITIAL_SP is ignored
*
* IAR Custom Memory layout notes:
* -There is no custom layout available for IAR - everything must be defined in
* the .icf file and use the default layout
*
*
* GCC Default Memory layout notes:
* -Block of memory from symbol __end__ to define INITIAL_SP used to setup interrupt
* stack and heap in the function set_stack_heap()
* -ISR_STACK_SIZE can be overridden to be larger or smaller
*
* GCC Custom Memory layout notes:
* -Heap can be explicitly placed by defining both HEAP_START and HEAP_SIZE
* -Interrupt stack can be explicitly placed by defining both ISR_STACK_START and ISR_STACK_SIZE
*
*
* ARM Memory layout
* -Block of memory from end of region "RW_IRAM1" to define INITIAL_SP used to setup interrupt
* stack and heap in the function set_stack_heap()
* -ISR_STACK_SIZE can be overridden to be larger or smaller
*
* ARM Custom Memory layout notes:
* -Heap can be explicitly placed by defining both HEAP_START and HEAP_SIZE
* -Interrupt stack can be explicitly placed by defining both ISR_STACK_START and ISR_STACK_SIZE
*
*/
#include <stdlib.h>
#include "cmsis.h"
#include "mbed_rtx.h"
#include "mbed_rtos_storage.h"
#include "cmsis_os2.h"
#include "mbed_toolchain.h"
#include "mbed_error.h"
/* Heap limits - only used if set */
extern unsigned char *mbed_heap_start;
extern uint32_t mbed_heap_size;
unsigned char *mbed_stack_isr_start = 0;
uint32_t mbed_stack_isr_size = 0;
WEAK void mbed_main(void);
void pre_main (void);
osThreadAttr_t _main_thread_attr;
/** The main thread's stack size can be configured by the application, if not explicitly specified it'll default to 4K */
#ifndef MBED_CONF_APP_MAIN_STACK_SIZE
#define MBED_CONF_APP_MAIN_STACK_SIZE 4096
#endif
MBED_ALIGN(8) char _main_stack[MBED_CONF_APP_MAIN_STACK_SIZE];
mbed_rtos_storage_thread_t _main_obj;
osMutexId_t singleton_mutex_id;
mbed_rtos_storage_mutex_t singleton_mutex_obj;
osMutexAttr_t singleton_mutex_attr;
/*
* Sanity check values
*/
#if defined(__ICCARM__) && \
(defined(HEAP_START) || defined(HEAP_SIZE) || \
defined(ISR_STACK_START) && defined(ISR_STACK_SIZE))
#error "No custom layout allowed for IAR. Use .icf file instead"
#endif
#if defined(HEAP_START) && !defined(HEAP_SIZE)
#error "HEAP_SIZE must be defined if HEAP_START is defined"
#endif
#if defined(ISR_STACK_START) && !defined(ISR_STACK_SIZE)
#error "ISR_STACK_SIZE must be defined if ISR_STACK_START is defined"
#endif
#if defined(HEAP_SIZE) && !defined(HEAP_START)
#error "HEAP_START must be defined if HEAP_SIZE is defined"
#endif
/* IAR - INITIAL_SP and HEAP_START ignored as described in Memory layout notes above
*/
#if !defined(__ICCARM__) && !defined(INITIAL_SP) && !defined(HEAP_START)
#error "no target defined"
#endif
/* Interrupt stack and heap always defined for IAR
* Main thread defined here
*/
#if defined(__ICCARM__)
#pragma section="CSTACK"
#pragma section="HEAP"
#define HEAP_START ((unsigned char*)__section_begin("HEAP"))
#define HEAP_SIZE ((uint32_t)__section_size("HEAP"))
#define ISR_STACK_START ((unsigned char*)__section_begin("CSTACK"))
#define ISR_STACK_SIZE ((uint32_t)__section_size("CSTACK"))
#endif
/* Define heap region if it has not been defined already */
#if !defined(HEAP_START)
#if defined(__ICCARM__)
#error "Heap should already be defined for IAR"
#elif defined(__CC_ARM)
extern uint32_t Image$$RW_IRAM1$$ZI$$Limit[];
#define HEAP_START ((unsigned char*)Image$$RW_IRAM1$$ZI$$Limit)
#define HEAP_SIZE ((uint32_t)((uint32_t)INITIAL_SP - (uint32_t)HEAP_START))
#elif defined(__GNUC__)
extern uint32_t __end__[];
#define HEAP_START ((unsigned char*)__end__)
#define HEAP_SIZE ((uint32_t)((uint32_t)INITIAL_SP - (uint32_t)HEAP_START))
#endif
#endif
/* Define stack sizes if they haven't been set already */
#if !defined(ISR_STACK_SIZE)
#define ISR_STACK_SIZE ((uint32_t)1024)
#endif
/*
* mbed_set_stack_heap purpose is to set the following variables:
* -mbed_heap_start
* -mbed_heap_size
* -mbed_stack_isr_start
* -mbed_stack_isr_size
*/
void mbed_set_stack_heap(void) {
unsigned char *free_start = HEAP_START;
uint32_t free_size = HEAP_SIZE;
#ifdef ISR_STACK_START
/* Interrupt stack explicitly specified */
mbed_stack_isr_size = ISR_STACK_SIZE;
mbed_stack_isr_start = ISR_STACK_START;
#else
/* Interrupt stack - reserve space at the end of the free block */
mbed_stack_isr_size = ISR_STACK_SIZE < free_size ? ISR_STACK_SIZE : free_size;
mbed_stack_isr_start = free_start + free_size - mbed_stack_isr_size;
free_size -= mbed_stack_isr_size;
#endif
/* Heap - everything else */
mbed_heap_size = free_size;
mbed_heap_start = free_start;
}
static void mbed_cpy_nvic(void)
{
/* If vector address in RAM is defined, copy and switch to dynamic vectors. Exceptions for M0 which doesn't have
VTOR register and for A9 for which CMSIS doesn't define NVIC_SetVector; in both cases target code is
responsible for correctly handling the vectors.
*/
#if !defined(__CORTEX_M0) && !defined(__CORTEX_A9)
#ifdef NVIC_RAM_VECTOR_ADDRESS
uint32_t *old_vectors = (uint32_t *)SCB->VTOR;
uint32_t *vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
for (int i = 0; i < NVIC_NUM_VECTORS; i++) {
vectors[i] = old_vectors[i];
}
SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
#endif /* NVIC_RAM_VECTOR_ADDRESS */
#endif /* !defined(__CORTEX_M0) && !defined(__CORTEX_A9) */
}
/* mbed_main is a function that is called before main()
* mbed_sdk_init() is also a function that is called before main(), but unlike
* mbed_main(), it is not meant for user code, but for the SDK itself to perform
* initializations before main() is called.
*/
WEAK void mbed_main(void) {
}
/* This function can be implemented by the target to perform higher level target initialization, before the mbed OS or
* RTX is started.
*/
void mbed_sdk_init(void);
WEAK void mbed_sdk_init(void) {
}
void mbed_start_main(void)
{
_main_thread_attr.stack_mem = _main_stack;
_main_thread_attr.stack_size = sizeof(_main_stack);
_main_thread_attr.cb_size = sizeof(_main_obj);
_main_thread_attr.cb_mem = &_main_obj;
_main_thread_attr.priority = osPriorityNormal;
_main_thread_attr.name = "main_thread";
osThreadId_t result = osThreadNew((osThreadFunc_t)pre_main, NULL, &_main_thread_attr);
if ((void *)result == NULL) {
error("Pre main thread not created");
}
osKernelStart();
}
/******************** Toolchain specific code ********************/
#if defined (__CC_ARM)
/* Common for both ARMC and MICROLIB */
int $Super$$main(void);
int $Sub$$main(void) {
mbed_main();
return $Super$$main();
}
#if defined (__MICROLIB) /******************** MICROLIB ********************/
int main(void);
void _main_init (void) __attribute__((section(".ARM.Collect$$$$000000FF")));
void $Super$$__cpp_initialize__aeabi_(void);
void _main_init (void) {
mbed_set_stack_heap();
/* Copy the vector table to RAM only if uVisor is not in use. */
#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
mbed_cpy_nvic();
#endif
mbed_sdk_init();
osKernelInitialize();
mbed_start_main();
for (;;);
}
void $Sub$$__cpp_initialize__aeabi_(void)
{
/* This should invoke C++ initializers prior _main_init, we keep this empty and
* invoke them after _main_init, when the RTX is already initilized.
*/
}
void pre_main()
{
singleton_mutex_attr.name = "singleton_mutex";
singleton_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
singleton_mutex_attr.cb_size = sizeof(singleton_mutex_obj);
singleton_mutex_attr.cb_mem = &singleton_mutex_obj;
singleton_mutex_id = osMutexNew(&singleton_mutex_attr);
$Super$$__cpp_initialize__aeabi_();
main();
}
#else /******************** ARMC ********************/
#include <rt_misc.h>
extern __value_in_regs struct __argc_argv __rt_lib_init(unsigned heapbase, unsigned heaptop);
extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(void);
extern void _platform_post_stackheap_init (void);
extern int main(int argc, char* argv[]);
void pre_main (void)
{
singleton_mutex_attr.name = "singleton_mutex";
singleton_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
singleton_mutex_attr.cb_size = sizeof(singleton_mutex_obj);
singleton_mutex_attr.cb_mem = &singleton_mutex_obj;
singleton_mutex_id = osMutexNew(&singleton_mutex_attr);
__rt_lib_init((unsigned)mbed_heap_start, (unsigned)(mbed_heap_start + mbed_heap_size));
main(0, NULL);
}
/* The single memory model is checking for stack collision at run time, verifing
that the heap pointer is underneath the stack pointer.
With the RTOS there is not only one stack above the heap, there are multiple
stacks and some of them are underneath the heap pointer.
*/
#pragma import(__use_two_region_memory)
/* Called by the C library */
void __rt_entry (void) {
__user_setup_stackheap();
mbed_set_stack_heap();
/* Copy the vector table to RAM only if uVisor is not in use. */
#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
mbed_cpy_nvic();
#endif
mbed_sdk_init();
_platform_post_stackheap_init();
mbed_start_main();
}
typedef void *mutex;
/* ARM toolchain requires dynamically created mutexes to enforce thread safety. There's
up to 8 static mutexes, protecting atexit, signalinit, stdin, stdout, stderr, stream_list,
fp_trap_init and the heap. Additionally for each call to fopen one extra mutex will be
created.
mbed OS provides a RTX pool for 8 mutexes, to satisfy the static requirements. All
additional mutexes will be allocated on the heap. We can't use the heap allocation for
all the required mutexes, as the heap operations also require a mutex. We don't need to
worry about freeing the allocated memory as library mutexes are only freed when the
application finishes executing.
*/
int _mutex_initialize(mutex *m)
{
osMutexAttr_t attr;
memset(&attr, 0, sizeof(attr));
attr.name = "ARM toolchain mutex";
attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
*m = osMutexNew(&attr);
if (*m != NULL) {
return 1;
}
/* Mutex pool exhausted, try using HEAP */
attr.cb_size = sizeof(mbed_rtos_storage_mutex_t);
attr.cb_mem = (void*)malloc(attr.cb_size);
if (attr.cb_mem == NULL) {
osRtxErrorNotify(osRtxErrorClibSpace, m);
return 0;
}
*m = osMutexNew(&attr);
if (*m == NULL) {
osRtxErrorNotify(osRtxErrorClibMutex, m);
return 0;
}
return 1;
}
#endif /* ARMC */
#elif defined (__GNUC__) /******************** GCC ********************/
extern int main(int argc, char* argv[]);
extern void __libc_init_array (void);
extern int __real_main(void);
osMutexId_t malloc_mutex_id;
mbed_rtos_storage_mutex_t malloc_mutex_obj;
osMutexAttr_t malloc_mutex_attr;
osMutexId_t env_mutex_id;
mbed_rtos_storage_mutex_t env_mutex_obj;
osMutexAttr_t env_mutex_attr;
#ifdef FEATURE_UVISOR
#include "uvisor-lib/uvisor-lib.h"
#endif/* FEATURE_UVISOR */
int __wrap_main(void) {
mbed_main();
return __real_main();
}
void pre_main(void)
{
singleton_mutex_attr.name = "singleton_mutex";
singleton_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
singleton_mutex_attr.cb_size = sizeof(singleton_mutex_obj);
singleton_mutex_attr.cb_mem = &singleton_mutex_obj;
singleton_mutex_id = osMutexNew(&singleton_mutex_attr);
malloc_mutex_attr.name = "malloc_mutex";
malloc_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
malloc_mutex_attr.cb_size = sizeof(malloc_mutex_obj);
malloc_mutex_attr.cb_mem = &malloc_mutex_obj;
malloc_mutex_id = osMutexNew(&malloc_mutex_attr);
env_mutex_attr.name = "env_mutex";
env_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
env_mutex_attr.cb_size = sizeof(env_mutex_obj);
env_mutex_attr.cb_mem = &env_mutex_obj;
env_mutex_id = osMutexNew(&env_mutex_attr);
__libc_init_array();
main(0, NULL);
}
void software_init_hook(void)
{
mbed_set_stack_heap();
/* Copy the vector table to RAM only if uVisor is not in use. */
#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
mbed_cpy_nvic();
#endif
mbed_sdk_init();
osKernelInitialize();
/* uvisor_lib_init calls RTOS functions, so must be called after the RTOS has
* been initialized. */
#ifdef FEATURE_UVISOR
int return_code;
return_code = uvisor_lib_init();
if (return_code) {
mbed_die();
}
#endif/* FEATURE_UVISOR */
mbed_start_main();
}
/* Opaque declaration of _reent structure */
struct _reent;
void __rtos_malloc_lock( struct _reent *_r )
{
osMutexAcquire(malloc_mutex_id, osWaitForever);
}
void __rtos_malloc_unlock( struct _reent *_r )
{
osMutexRelease(malloc_mutex_id);
}
void __rtos_env_lock( struct _reent *_r )
{
osMutexAcquire(env_mutex_id, osWaitForever);
}
void __rtos_env_unlock( struct _reent *_r )
{
osMutexRelease(env_mutex_id);
}
#endif
#if defined(TOOLCHAIN_IAR) /******************** IAR ********************/
extern void* __vector_table;
extern int __low_level_init(void);
extern void __iar_data_init3(void);
extern __weak void __iar_init_core( void );
extern __weak void __iar_init_vfp( void );
extern void __iar_dynamic_initialization(void);
extern void mbed_sdk_init(void);
extern int main(void);
extern void exit(int arg);
static uint8_t low_level_init_needed;
void pre_main(void)
{
singleton_mutex_attr.name = "singleton_mutex";
singleton_mutex_attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
singleton_mutex_attr.cb_size = sizeof(singleton_mutex_obj);
singleton_mutex_attr.cb_mem = &singleton_mutex_obj;
singleton_mutex_id = osMutexNew(&singleton_mutex_attr);
if (low_level_init_needed) {
__iar_dynamic_initialization();
}
mbed_main();
main();
}
#pragma required=__vector_table
void __iar_program_start( void )
{
__iar_init_core();
__iar_init_vfp();
uint8_t low_level_init_needed_local;
low_level_init_needed_local = __low_level_init();
if (low_level_init_needed_local) {
__iar_data_init3();
/* Copy the vector table to RAM only if uVisor is not in use. */
#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
mbed_cpy_nvic();
#endif
mbed_sdk_init();
}
mbed_set_stack_heap();
/* Store in a global variable after RAM has been initialized */
low_level_init_needed = low_level_init_needed_local;
osKernelInitialize();
mbed_start_main();
}
/* Thread safety */
static osMutexId_t std_mutex_id_sys[_MAX_LOCK] = {0};
static mbed_rtos_storage_mutex_t std_mutex_sys[_MAX_LOCK] = {0};
#define _FOPEN_MAX 10
static osMutexId_t std_mutex_id_file[_FOPEN_MAX] = {0};
static mbed_rtos_storage_mutex_t std_mutex_file[_FOPEN_MAX] = {0};
void __iar_system_Mtxinit(__iar_Rmtx *mutex) /* Initialize a system lock */
{
osMutexAttr_t attr;
uint32_t index;
for (index = 0; index < _MAX_LOCK; index++) {
if (0 == std_mutex_id_sys[index]) {
attr.name = "system_mutex";
attr.cb_mem = &std_mutex_sys[index];
attr.cb_size = sizeof(std_mutex_sys[index]);
attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
std_mutex_id_sys[index] = osMutexNew(&attr);
*mutex = (__iar_Rmtx*)&std_mutex_id_sys[index];
return;
}
}
/* This should never happen */
error("Not enough mutexes\n");
}
void __iar_system_Mtxdst(__iar_Rmtx *mutex) /* Destroy a system lock */
{
osMutexDelete(*(osMutexId_t*)*mutex);
*mutex = 0;
}
void __iar_system_Mtxlock(__iar_Rmtx *mutex) /* Lock a system lock */
{
osMutexAcquire(*(osMutexId_t*)*mutex, osWaitForever);
}
void __iar_system_Mtxunlock(__iar_Rmtx *mutex) /* Unlock a system lock */
{
osMutexRelease(*(osMutexId_t*)*mutex);
}
void __iar_file_Mtxinit(__iar_Rmtx *mutex) /* Initialize a file lock */
{
osMutexAttr_t attr;
uint32_t index;
for (index = 0; index < _FOPEN_MAX; index++) {
if (0 == std_mutex_id_file[index]) {
attr.name = "file_mutex";
attr.cb_mem = &std_mutex_file[index];
attr.cb_size = sizeof(std_mutex_file[index]);
attr.attr_bits = osMutexRecursive | osMutexPrioInherit | osMutexRobust;
std_mutex_id_file[index] = osMutexNew(&attr);
*mutex = (__iar_Rmtx*)&std_mutex_id_file[index];
return;
}
}
/* The variable _FOPEN_MAX needs to be increased */
error("Not enough mutexes\n");
}
void __iar_file_Mtxdst(__iar_Rmtx *mutex) /* Destroy a file lock */
{
osMutexDelete(*(osMutexId_t*)*mutex);
*mutex = 0;
}
void __iar_file_Mtxlock(__iar_Rmtx *mutex) /* Lock a file lock */
{
osMutexAcquire(*(osMutexId_t*)*mutex, osWaitForever);
}
void __iar_file_Mtxunlock(__iar_Rmtx *mutex) /* Unlock a file lock */
{
osMutexRelease(*(osMutexId_t*)*mutex);
}
#endif
