/**************************************************************************//**
* @file epwm_reg.h
* @version V1.00
* @brief EPWM register definition header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __EPWM_REG_H__
#define __EPWM_REG_H__
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/**
@addtogroup REGISTER Control Register
@{
*/
/**
@addtogroup EPWM Pulse Width Modulation Controller(EPWM)
Memory Mapped Structure for EPWM Controller
@{ */
typedef struct
{
/**
* @var ECAPDAT_T::RCAPDAT
* Offset: 0x20C EPWM Rising Capture Data Register 0~5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var ECAPDAT_T::FCAPDAT
* Offset: 0x210 EPWM Falling Capture Data Register 0~5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
*/
__IO uint32_t RCAPDAT; /*!< [0x20C/0x214/0x21C/0x224/0x22C/0x234] EPWM Rising Capture Data Register 0~5 */
__IO uint32_t FCAPDAT; /*!< [0x210/0x218/0x220/0x228/0x230/0x238] EPWM Falling Capture Data Register 0~5 */
} ECAPDAT_T;
typedef struct
{
/**
* @var EPWM_T::CTL0
* Offset: 0x00 EPWM Control Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CTRLD0 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[1] |CTRLD1 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[2] |CTRLD2 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[3] |CTRLD3 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[4] |CTRLD4 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[5] |CTRLD5 |Center Re-load
* | | |In up-down counter type, PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the center point of a period
* |[8] |WINLDEN0 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[9] |WINLDEN1 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[10] |WINLDEN2 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[11] |WINLDEN3 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[12] |WINLDEN4 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[13] |WINLDEN5 |Window Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point of each period when valid reload window is set
* | | |The valid reload window is set by software write 1 to EPWM_LOAD register and cleared by hardware after load success.
* |[16] |IMMLDEN0 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[17] |IMMLDEN1 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[18] |IMMLDEN2 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[19] |IMMLDEN3 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[20] |IMMLDEN4 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[21] |IMMLDEN5 |Immediately Load Enable Bits
* | | |0 = PERIOD will load to PBUF at the end point of each period
* | | |CMP will load to CMPBUF at the end point or center point of each period by setting CTRLD bit.
* | | |1 = PERIOD/CMP will load to PBUF and CMPBUF immediately when software update PERIOD/CMP.
* | | |Note: If IMMLDENn is enabled, WINLDENn and CTRLDn will be invalid.
* |[24] |GROUPEN |Group Function Enable Bit
* | | |0 = The output waveform of each EPWM channel are independent.
* | | |1 = Unify the EPWM_CH2 and EPWM_CH4 to output the same waveform as EPWM_CH0 and unify the EPWM_CH3 and EPWM_CH5 to output the same waveform as EPWM_CH1.
* |[30] |DBGHALT |ICE Debug Mode Counter Halt (Write Protect)
* | | |If counter halt is enabled, EPWM all counters will keep current value until exit ICE debug mode.
* | | |0 = ICE debug mode counter halt Disabled.
* | | |1 = ICE debug mode counter halt Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[31] |DBGTRIOFF |ICE Debug Mode Acknowledge Disable Bit (Write Protect)
* | | |0 = ICE debug mode acknowledgement effects EPWM output.
* | | |EPWM pin will be forced as tri-state while ICE debug mode acknowledged.
* | | |1 = ICE debug mode acknowledgement disabled.
* | | |EPWM pin will keep output no matter ICE debug mode acknowledged or not.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* @var EPWM_T::CTL1
* Offset: 0x04 EPWM Control Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |CNTTYPE0 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[3:2] |CNTTYPE1 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[5:4] |CNTTYPE2 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[7:6] |CNTTYPE3 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[9:8] |CNTTYPE4 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[11:10] |CNTTYPE5 |EPWM Counter Behavior Type
* | | |00 = Up counter type (supported in capture mode).
* | | |01 = Down count type (supported in capture mode).
* | | |10 = Up-down counter type.
* | | |11 = Reserved.
* |[16] |CNTMODE0 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[17] |CNTMODE1 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[18] |CNTMODE2 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[19] |CNTMODE3 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[20] |CNTMODE4 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[21] |CNTMODE5 |EPWM Counter Mode
* | | |0 = Auto-reload mode.
* | | |1 = One-shot mode.
* |[24] |OUTMODE0 |EPWM Output Mode
* | | |Each bit n controls the output mode of corresponding EPWM channel n.
* | | |0 = EPWM independent mode.
* | | |1 = EPWM complementary mode.
* | | |Note: When operating in group function, these bits must all set to the same mode.
* |[25] |OUTMODE2 |EPWM Output Mode
* | | |Each bit n controls the output mode of corresponding EPWM channel n.
* | | |0 = EPWM independent mode.
* | | |1 = EPWM complementary mode.
* | | |Note: When operating in group function, these bits must all set to the same mode.
* |[26] |OUTMODE4 |EPWM Output Mode
* | | |Each bit n controls the output mode of corresponding EPWM channel n.
* | | |0 = EPWM independent mode.
* | | |1 = EPWM complementary mode.
* | | |Note: When operating in group function, these bits must all set to the same mode.
* @var EPWM_T::SYNC
* Offset: 0x08 EPWM Synchronization Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |PHSEN0 |SYNC Phase Enable Bits
* | | |0 = EPWM counter disable to load PHS value.
* | | |1 = EPWM counter enable to load PHS value.
* |[1] |PHSEN2 |SYNC Phase Enable Bits
* | | |0 = EPWM counter disable to load PHS value.
* | | |1 = EPWM counter enable to load PHS value.
* |[2] |PHSEN4 |SYNC Phase Enable Bits
* | | |0 = EPWM counter disable to load PHS value.
* | | |1 = EPWM counter enable to load PHS value.
* |[9:8] |SINSRC0 |EPWM0_SYNC_IN Source Selection
* | | |00 = Synchronize source from SYNC_IN or SWSYNC.
* | | |01 = Counter equal to 0.
* | | |10 = Counter equal to EPWM_CMPDATm, m denotes 1, 3, 5.
* | | |11 = SYNC_OUT will not be generated.
* |[11:10] |SINSRC2 |EPWM0_SYNC_IN Source Selection
* | | |00 = Synchronize source from SYNC_IN or SWSYNC.
* | | |01 = Counter equal to 0.
* | | |10 = Counter equal to EPWM_CMPDATm, m denotes 1, 3, 5.
* | | |11 = SYNC_OUT will not be generated.
* |[13:12] |SINSRC4 |EPWM0_SYNC_IN Source Selection
* | | |00 = Synchronize source from SYNC_IN or SWSYNC.
* | | |01 = Counter equal to 0.
* | | |10 = Counter equal to EPWM_CMPDATm, m denotes 1, 3, 5.
* | | |11 = SYNC_OUT will not be generated.
* |[16] |SNFLTEN |EPWM0_SYNC_IN Noise Filter Enable Bits
* | | |0 = Noise filter of input pin EPWM0_SYNC_IN Disabled.
* | | |1 = Noise filter of input pin EPWM0_SYNC_IN Enabled.
* |[19:17] |SFLTCSEL |SYNC Edge Detector Filter Clock Selection
* | | |000 = Filter clock = HCLK.
* | | |001 = Filter clock = HCLK/2.
* | | |010 = Filter clock = HCLK/4.
* | | |011 = Filter clock = HCLK/8.
* | | |100 = Filter clock = HCLK/16.
* | | |101 = Filter clock = HCLK/32.
* | | |110 = Filter clock = HCLK/64.
* | | |111 = Filter clock = HCLK/128.
* |[22:20] |SFLTCNT |SYNC Edge Detector Filter Count
* | | |The register bits control the counter number of edge detector.
* |[23] |SINPINV |SYNC Input Pin Inverse
* | | |0 = The state of pin SYNC is passed to the negative edge detector.
* | | |1 = The inversed state of pin SYNC is passed to the negative edge detector.
* |[24] |PHSDIR0 |EPWM Phase Direction Control
* | | |0 = Control EPWM counter count decrement after synchronizing.
* | | |1 = Control EPWM counter count increment after synchronizing.
* |[25] |PHSDIR2 |EPWM Phase Direction Control
* | | |0 = Control EPWM counter count decrement after synchronizing.
* | | |1 = Control EPWM counter count increment after synchronizing.
* |[26] |PHSDIR4 |EPWM Phase Direction Control
* | | |0 = Control EPWM counter count decrement after synchronizing.
* | | |1 = Control EPWM counter count increment after synchronizing.
* @var EPWM_T::SWSYNC
* Offset: 0x0C EPWM Software Control Synchronization Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SWSYNC0 |Software SYNC Function (Write Only)
* | | |When SINSRCn (EPWM_SYNC[13:8]) is selected to 0, SYNC_OUT source comes from SYNC_IN or this bit.
* |[1] |SWSYNC2 |Software SYNC Function (Write Only)
* | | |When SINSRCn (EPWM_SYNC[13:8]) is selected to 0, SYNC_OUT source comes from SYNC_IN or this bit.
* |[2] |SWSYNC4 |Software SYNC Function (Write Only)
* | | |When SINSRCn (EPWM_SYNC[13:8]) is selected to 0, SYNC_OUT source comes from SYNC_IN or this bit.
* @var EPWM_T::CLKSRC
* Offset: 0x10 EPWM Clock Source Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[2:0] |ECLKSRC0 |EPWM_CH01 External Clock Source Select
* | | |000 = EPWMx_CLK, x denotes 0 or 1.
* | | |001 = TIMER0 overflow.
* | | |010 = TIMER1 overflow.
* | | |011 = TIMER2 overflow.
* | | |100 = TIMER3 overflow.
* | | |Others = Reserved.
* |[10:8] |ECLKSRC2 |EPWM_CH23 External Clock Source Select
* | | |000 = EPWMx_CLK, x denotes 0 or 1.
* | | |001 = TIMER0 overflow.
* | | |010 = TIMER1 overflow.
* | | |011 = TIMER2 overflow.
* | | |100 = TIMER3 overflow.
* | | |Others = Reserved.
* |[18:16] |ECLKSRC4 |EPWM_CH45 External Clock Source Select
* | | |000 = EPWMx_CLK, x denotes 0 or 1.
* | | |001 = TIMER0 overflow.
* | | |010 = TIMER1 overflow.
* | | |011 = TIMER2 overflow.
* | | |100 = TIMER3 overflow.
* | | |Others = Reserved.
* @var EPWM_T::CNTEN
* Offset: 0x20 EPWM Counter Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CNTEN0 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* |[1] |CNTEN1 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* |[2] |CNTEN2 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* |[3] |CNTEN3 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* |[4] |CNTEN4 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* |[5] |CNTEN5 |EPWM Counter Enable Bits
* | | |0 = EPWM Counter and clock prescaler stop running.
* | | |1 = EPWM Counter and clock prescaler start running.
* @var EPWM_T::CNTCLR
* Offset: 0x24 EPWM Clear Counter Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CNTCLR0 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* |[1] |CNTCLR1 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* |[2] |CNTCLR2 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* |[3] |CNTCLR3 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* |[4] |CNTCLR4 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* |[5] |CNTCLR5 |Clear EPWM Counter Control Bit
* | | |It is automatically cleared by hardware. Each bit n controls the corresponding EPWM channel n.
* | | |0 = No effect.
* | | |1 = Clear 16-bit EPWM counter to 0000H.
* @var EPWM_T::LOAD
* Offset: 0x28 EPWM Load Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |LOAD0 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* |[1] |LOAD1 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* |[2] |LOAD2 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* |[3] |LOAD3 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* |[4] |LOAD4 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* |[5] |LOAD5 |Re-load EPWM Comparator Register Control Bit
* | | |This bit is software write to reload EPWM_CMPDATn, n=0~5. Hardware clear when current EPWM period end.
* | | |Write Operation:
* | | |0 = No effect.
* | | |1 = Set load window of window loading mode.
* | | |Read Operation:
* | | |0 = No load window is set.
* | | |1 = Load window is set.
* | | |Note: This bit only use in window loading mode, WINLDENn(EPWM_CTL0[13:8]) = 1.
* @var EPWM_T::PERIOD[6]
* Offset: 0x30 EPWM Period Register 0~5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |PERIOD |EPWM Period Register
* | | |Up-Count mode:
* | | |In this mode, EPWM counter counts from 0 to PERIOD, and restarts from 0.
* | | |EPWM period time = (PERIOD+1) * (CLKPSC+1) * EPWM_CLK .
* | | |Down-Count mode:
* | | |In this mode, EPWM counter counts from PERIOD to 0, and restarts from PERIOD.
* | | |EPWM period time = (PERIOD+1) * (CLKPSC+1) * EPWM_CLK .
* | | |Up-Down-Count mode:
* | | |In this mode, EPWM counter counts from 0 to PERIOD, then decrements to 0 and repeats again.
* | | |EPWM period time = 2 * PERIOD * (CLKPSC+1) * EPWM_CLK.
* @var EPWM_T::CMPDAT[6]
* Offset: 0x50 EPWM Comparator Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |CMP |EPWM Comparator Register
* | | |CMP is used to compare with CNT (EPWM_CNTn[15:0]) bits to generate EPWM waveform, interrupt and trigger EADC/DAC.
* | | |In independent mode, EPWM_CMPDATn, n=0,1..5 denote as 6 independent EPWM_CH0~5 compared point.
* | | |In complementary mode, EPWM_CMPDAT0, EPWM_CMPDAT 2, EPWM_CMPDAT4 denote as first compared point, and EPWM_CMPDAT1, EPWM_CMPDAT3, EPWM_CMPDAT5 denote as second compared point for the corresponding 3 complementary pairs EPWM_CH0 and EPWM_CH1, EPWM_CH2 and EPWM_CH3, EPWM_CH4 and EPWM_CH5.
* @var EPWM_T::PHS[3]
* Offset: 0x80 EPWM Counter Phase Register 0/1,2/3,4/5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |PHS |EPWM Synchronous Start Phase Bits
* | | |PHS determines the EPWM synchronous start phase value. These bits only use in synchronous function.
* @var EPWM_T::CNT[6]
* Offset: 0x90 EPWM Counter Register 0~5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |CNT |EPWM Data Register (Read Only)
* | | |User can monitor CNTR to know the current value in 16-bit period counter.
* |[16] |DIRF |EPWM Direction Indicator Flag (Read Only)
* | | |0 = Counter is counting down.
* | | |1 = Counter is counting up.
* @var EPWM_T::WGCTL0
* Offset: 0xB0 EPWM Generation Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |ZPCTL0 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[3:2] |ZPCTL1 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[5:4] |ZPCTL2 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[7:6] |ZPCTL3 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[9:8] |ZPCTL4 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[11:10] |ZPCTL5 |EPWM Zero Point Control
* | | |EPWM can control output level when EPWM counter counts to 0.
* | | |00 = Do nothing.
* | | |01 = EPWM zero point output Low.
* | | |10 = EPWM zero point output High.
* | | |11 = EPWM zero point output Toggle.
* |[17:16] |PRDPCTL0 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* |[19:18] |PRDPCTL1 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* |[21:20] |PRDPCTL2 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* |[23:22] |PRDPCTL3 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* |[25:24] |PRDPCTL4 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* |[27:26] |PRDPCTL5 |EPWM Period or Center Point Control
* | | |EPWM can control output level when EPWM counter counts to (PERIODn+1).
* | | |00 = Do nothing.
* | | |01 = EPWM period (center) point output Low.
* | | |10 = EPWM period (center) point output High.
* | | |11 = EPWM period (center) point output Toggle.
* | | |Note: This bit is center point control when EPWM counter operating in up-down counter type.
* @var EPWM_T::WGCTL1
* Offset: 0xB4 EPWM Generation Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |CMPUCTL0 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[3:2] |CMPUCTL1 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[5:4] |CMPUCTL2 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[7:6] |CMPUCTL3 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[9:8] |CMPUCTL4 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[11:10] |CMPUCTL5 |EPWM Compare Up Point Control
* | | |EPWM can control output level when EPWM counter counts up to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare up point output Low.
* | | |10 = EPWM compare up point output High.
* | | |11 = EPWM compare up point output Toggle.
* | | |Note: In complementary mode, CMPUCTL1, 3, 5 is used as another CMPUCTL for channel 0, 2, 4.
* |[17:16] |CMPDCTL0 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* |[19:18] |CMPDCTL1 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* |[21:20] |CMPDCTL2 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* |[23:22] |CMPDCTL3 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* |[25:24] |CMPDCTL4 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* |[27:26] |CMPDCTL5 |EPWM Compare Down Point Control
* | | |EPWM can control output level when EPWM counter counts down to CMP.
* | | |00 = Do nothing.
* | | |01 = EPWM compare down point output Low.
* | | |10 = EPWM compare down point output High.
* | | |11 = EPWM compare down point output Toggle.
* | | |Note: In complementary mode, CMPDCTL1, 3, 5 is used as another CMPDCTL for channel 0, 2, 4.
* @var EPWM_T::MSKEN
* Offset: 0xB8 EPWM Mask Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |MSKEN0 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* |[1] |MSKEN1 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* |[2] |MSKEN2 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* |[3] |MSKEN3 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* |[4] |MSKEN4 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* |[5] |MSKEN5 |EPWM Mask Enable Bits
* | | |The EPWM output signal will be masked when this bit is enabled
* | | |The corresponding EPWM channel n will output MSKDATn (EPWM_MSK[5:0]) data.
* | | |0 = EPWM output signal is non-masked.
* | | |1 = EPWM output signal is masked and output MSKDATn data.
* @var EPWM_T::MSK
* Offset: 0xBC EPWM Mask Data Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |MSKDAT0 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* |[1] |MSKDAT1 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* |[2] |MSKDAT2 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* |[3] |MSKDAT3 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* |[4] |MSKDAT4 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* |[5] |MSKDAT5 |EPWM Mask Data Bit
* | | |This data bit control the state of EPWMn output pin, if corresponding mask function is enabled.
* | | |0 = Output logic low to EPWM channel n.
* | | |1 = Output logic high to EPWM channel n.
* @var EPWM_T::BNF
* Offset: 0xC0 EPWM Brake Noise Filter Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BRK0NFEN |EPWM Brake 0 Noise Filter Enable Bit
* | | |0 = Noise filter of EPWM Brake 0 Disabled.
* | | |1 = Noise filter of EPWM Brake 0 Enabled.
* |[3:1] |BRK0NFSEL |Brake 0 Edge Detector Filter Clock Selection
* | | |000 = Filter clock = HCLK.
* | | |001 = Filter clock = HCLK/2.
* | | |010 = Filter clock = HCLK/4.
* | | |011 = Filter clock = HCLK/8.
* | | |100 = Filter clock = HCLK/16.
* | | |101 = Filter clock = HCLK/32.
* | | |110 = Filter clock = HCLK/64.
* | | |111 = Filter clock = HCLK/128.
* |[6:4] |BRK0FCNT |Brake 0 Edge Detector Filter Count
* | | |The register bits control the Brake0 filter counter to count from 0 to BRK0FCNT.
* |[7] |BRK0PINV |Brake 0 Pin Inverse
* | | |0 = brake pin event will be detected if EPWMx_BRAKE0 pin status transfer from low to high in edge-detect, or pin status is high in level-detect.
* | | |1 = brake pin event will be detected if EPWMx_BRAKE0 pin status transfer from high to low in edge-detect, or pin status is low in level-detect.
* |[8] |BRK1NFEN |EPWM Brake 1 Noise Filter Enable Bit
* | | |0 = Noise filter of EPWM Brake 1 Disabled.
* | | |1 = Noise filter of EPWM Brake 1 Enabled.
* |[11:9] |BRK1NFSEL |Brake 1 Edge Detector Filter Clock Selection
* | | |000 = Filter clock = HCLK.
* | | |001 = Filter clock = HCLK/2.
* | | |010 = Filter clock = HCLK/4.
* | | |011 = Filter clock = HCLK/8.
* | | |100 = Filter clock = HCLK/16.
* | | |101 = Filter clock = HCLK/32.
* | | |110 = Filter clock = HCLK/64.
* | | |111 = Filter clock = HCLK/128.
* |[14:12] |BRK1FCNT |Brake 1 Edge Detector Filter Count
* | | |The register bits control the Brake1 filter counter to count from 0 to BRK1FCNT.
* |[15] |BRK1PINV |Brake 1 Pin Inverse
* | | |0 = brake pin event will be detected if EPWMx_BRAKE1 pin status transfer from low to high in edge-detect, or pin status is high in level-detect.
* | | |1 = brake pin event will be detected if EPWMx_BRAKE1 pin status transfer from high to low in edge-detect, or pin status is low in level-detect.
* |[16] |BK0SRC |Brake 0 Pin Source Select
* | | |For EPWM0 setting:
* | | |0 = Brake 0 pin source come from EPWM0_BRAKE0.
* | | |1 = Brake 0 pin source come from EPWM1_BRAKE0.
* | | |For EPWM1 setting:
* | | |0 = Brake 0 pin source come from EPWM1_BRAKE0.
* | | |1 = Brake 0 pin source come from EPWM0_BRAKE0.
* |[24] |BK1SRC |Brake 1 Pin Source Select
* | | |For EPWM0 setting:
* | | |0 = Brake 1 pin source come from EPWM0_BRAKE1.
* | | |1 = Brake 1 pin source come from EPWM1_BRAKE1.
* | | |For EPWM1 setting:
* | | |0 = Brake 1 pin source come from EPWM1_BRAKE1.
* | | |1 = Brake 1 pin source come from EPWM0_BRAKE1.
* @var EPWM_T::FAILBRK
* Offset: 0xC4 EPWM System Fail Brake Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CSSBRKEN |Clock Security System Detection Trigger EPWM Brake Function 0 Enable Bit
* | | |0 = Brake Function triggered by CSS detection Disabled.
* | | |1 = Brake Function triggered by CSS detection Enabled.
* |[1] |BODBRKEN |Brown-out Detection Trigger EPWM Brake Function 0 Enable Bit
* | | |0 = Brake Function triggered by BOD Disabled.
* | | |1 = Brake Function triggered by BOD Enabled.
* |[2] |RAMBRKEN |SRAM Parity Error Detection Trigger EPWM Brake Function 0 Enable Bit
* | | |0 = Brake Function triggered by SRAM parity error detection Disabled.
* | | |1 = Brake Function triggered by SRAM parity error detection Enabled.
* |[3] |CORBRKEN |Core Lockup Detection Trigger EPWM Brake Function 0 Enable Bit
* | | |0 = Brake Function triggered by Core lockup detection Disabled.
* | | |1 = Brake Function triggered by Core lockup detection Enabled.
* @var EPWM_T::BRKCTL[3]
* Offset: 0xC8 EPWM Brake Edge Detect Control Register 0/1,2/3,4/5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CPO0EBEN |Enable ACMP0_O Digital Output As Edge-detect Brake Source (Write Protect)
* | | |0 = ACMP0_O as edge-detect brake source Disabled.
* | | |1 = ACMP0_O as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[1] |CPO1EBEN |Enable ACMP1_O Digital Output As Edge-detect Brake Source (Write Protect)
* | | |0 = ACMP1_O as edge-detect brake source Disabled.
* | | |1 = ACMP1_O as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[2] |CPO2EBEN |Enable ACMP2_O Digital Output As Edge-detect Brake Source (Write Protect)
* | | |0 = ACMP2_O as edge-detect brake source Disabled.
* | | |1 = ACMP2_O as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[3] |CPO3EBEN |Enable ACMP3_O Digital Output As Edge-detect Brake Source (Write Protect)
* | | |0 = ACMP3_O as edge-detect brake source Disabled.
* | | |1 = ACMP3_O as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[4] |BRKP0EEN |Enable EPWMx_BRAKE0 Pin As Edge-detect Brake Source (Write Protect)
* | | |0 = EPWMx_BRAKE0 pin as edge-detect brake source Disabled.
* | | |1 = EPWMx_BRAKE0 pin as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[5] |BRKP1EEN |Enable EPWMx_BRAKE1 Pin As Edge-detect Brake Source (Write Protect)
* | | |0 = EPWMx_BRAKE1 pin as edge-detect brake source Disabled.
* | | |1 = EPWMx_BRAKE1 pin as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[7] |SYSEBEN |Enable System Fail As Edge-detect Brake Source (Write Protect)
* | | |0 = System Fail condition as edge-detect brake source Disabled.
* | | |1 = System Fail condition as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[8] |CPO0LBEN |Enable ACMP0_O Digital Output As Level-detect Brake Source (Write Protect)
* | | |0 = ACMP0_O as level-detect brake source Disabled.
* | | |1 = ACMP0_O as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[9] |CPO1LBEN |Enable ACMP1_O Digital Output As Level-detect Brake Source (Write Protect)
* | | |0 = ACMP1_O as level-detect brake source Disabled.
* | | |1 = ACMP1_O as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[10] |CPO2LBEN |Enable ACMP2_O Digital Output As Level-detect Brake Source (Write Protect)
* | | |0 = ACMP2_O as level-detect brake source Disabled.
* | | |1 = ACMP2_O as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[11] |CPO3LBEN |Enable ACMP3_O Digital Output As Level-detect Brake Source (Write Protect)
* | | |0 = ACMP3_O as level-detect brake source Disabled.
* | | |1 = ACMP3_O as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[12] |BRKP0LEN |Enable BKP0 Pin As Level-detect Brake Source (Write Protect)
* | | |0 = EPWMx_BRAKE0 pin as level-detect brake source Disabled.
* | | |1 = EPWMx_BRAKE0 pin as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[13] |BRKP1LEN |Enable BKP1 Pin As Level-detect Brake Source (Write Protect)
* | | |0 = EPWMx_BRAKE1 pin as level-detect brake source Disabled.
* | | |1 = EPWMx_BRAKE1 pin as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[15] |SYSLBEN |Enable System Fail As Level-detect Brake Source (Write Protect)
* | | |0 = System Fail condition as level-detect brake source Disabled.
* | | |1 = System Fail condition as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[17:16] |BRKAEVEN |EPWM Brake Action Select for Even Channel (Write Protect)
* | | |00 = EPWMx brake event will not affect even channels output.
* | | |01 = EPWM even channel output tri-state when EPWMx brake event happened.
* | | |10 = EPWM even channel output low level when EPWMx brake event happened.
* | | |11 = EPWM even channel output high level when EPWMx brake event happened.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[19:18] |BRKAODD |EPWM Brake Action Select for Odd Channel (Write Protect)
* | | |00 = EPWMx brake event will not affect odd channels output.
* | | |01 = EPWM odd channel output tri-state when EPWMx brake event happened.
* | | |10 = EPWM odd channel output low level when EPWMx brake event happened.
* | | |11 = EPWM odd channel output high level when EPWMx brake event happened.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[20] |EADC0EBEN |Enable EADC0 Result Monitor as Edge-detect Brake Source (Write Protect)
* | | |0 = EADC0RM as edge-detect brake source Disabled.
* | | |1 = EADC0RM as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[21] |EADC1EBEN |Enable EADC1 Result Monitor as Edge-detect Brake Source (Write Protect)
* | | |0 = EADC1RM as edge-detect brake source Disabled.
* | | |1 = EADC1RM as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[22] |EADC2EBEN |Enable EADC2 Result Monitor as Edge-detect Brake Source (Write Protect)
* | | |0 = EADC1RM as edge-detect brake source Disabled.
* | | |1 = EADC1RM as edge-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[28] |EADC0LBEN |Enable EADC0 Result Monitor as Level-detect Brake Source (Write Protect)
* | | |0 = EADC0RM as level-detect brake source Disabled.
* | | |1 = EADC0RM as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[29] |EADC1LBEN |Enable EADC1 Result Monitor as Level-detect Brake Source (Write Protect)
* | | |0 = EADC1RM as level-detect brake source Disabled.
* | | |1 = EADC1RM as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[30] |EADC2LBEN |Enable EADC2 Result Monitor as Level-detect Brake Source (Write Protect)
* | | |0 = EADC2RM as level-detect brake source Disabled.
* | | |1 = EADC2RM as level-detect brake source Enabled.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::POLCTL
* Offset: 0xD4 EPWM Pin Polar Inverse Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |PINV0 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* |[1] |PINV1 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* |[2] |PINV2 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* |[3] |PINV3 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* |[4] |PINV4 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* |[5] |PINV5 |EPWM PIN Polar Inverse Control
* | | |The register controls polarity state of EPWMx_CHn output pin.
* | | |0 = EPWMx_CHn output pin polar inverse Disabled.
* | | |1 = EPWMx_CHn output pin polar inverse Enabled.
* @var EPWM_T::POEN
* Offset: 0xD8 EPWM Output Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |POEN0 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* |[1] |POEN1 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* |[2] |POEN2 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* |[3] |POEN3 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* |[4] |POEN4 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* |[5] |POEN5 |EPWM Pin Output Enable Bits
* | | |0 = EPWMx_CHn pin at tri-state.
* | | |1 = EPWMx_CHn pin in output mode.
* @var EPWM_T::SWBRK
* Offset: 0xDC EPWM Software Brake Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BRKETRG0 |EPWM Edge Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger edge brake, and set BRKEIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[1] |BRKETRG2 |EPWM Edge Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger edge brake, and set BRKEIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[2] |BRKETRG4 |EPWM Edge Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger edge brake, and set BRKEIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[8] |BRKLTRG0 |EPWM Level Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger level brake, and set BRKLIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[9] |BRKLTRG2 |EPWM Level Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger level brake, and set BRKLIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[10] |BRKLTRG4 |EPWM Level Brake Software Trigger (Write Only) (Write Protect)
* | | |Write 1 to this bit will trigger level brake, and set BRKLIFn to 1 in EPWM_INTSTS1 register.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::INTEN0
* Offset: 0xE0 EPWM Interrupt Enable Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ZIEN0 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[1] |ZIEN1 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[2] |ZIEN2 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[3] |ZIEN3 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[4] |ZIEN4 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[5] |ZIEN5 |EPWM Zero Point Interrupt Enable Bits
* | | |0 = Zero point interrupt Disabled.
* | | |1 = Zero point interrupt Enabled.
* | | |Note: Odd channels will read always 0 at complementary mode.
* |[8] |PIEN0 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[9] |PIEN1 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[10] |PIEN2 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[11] |PIEN3 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[12] |PIEN4 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[13] |PIEN5 |EPWM Period Point Interrupt Enable Bits
* | | |0 = Period point interrupt Disabled.
* | | |1 = Period point interrupt Enabled.
* | | |Note1: When up-down counter type period point means center point.
* | | |Note2: Odd channels will read always 0 at complementary mode.
* |[16] |CMPUIEN0 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[17] |CMPUIEN1 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[18] |CMPUIEN2 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[19] |CMPUIEN3 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[20] |CMPUIEN4 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[21] |CMPUIEN5 |EPWM Compare Up Count Interrupt Enable Bits
* | | |0 = Compare up count interrupt Disabled.
* | | |1 = Compare up count interrupt Enabled.
* | | |Note: In complementary mode, CMPUIEN1, 3, 5 is used as another CMPUIEN for channel 0, 2, 4.
* |[24] |CMPDIEN0 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* |[25] |CMPDIEN1 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* |[26] |CMPDIEN2 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* |[27] |CMPDIEN3 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* |[28] |CMPDIEN4 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* |[29] |CMPDIEN5 |EPWM Compare Down Count Interrupt Enable Bits
* | | |0 = Compare down count interrupt Disabled.
* | | |1 = Compare down count interrupt Enabled.
* | | |Note: In complementary mode, CMPDIEN1, 3, 5 is used as another CMPDIEN for channel 0, 2, 4.
* @var EPWM_T::INTEN1
* Offset: 0xE4 EPWM Interrupt Enable Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BRKEIEN0_1|EPWM Edge-detect Brake Interrupt Enable for Channel0/1 (Write Protect)
* | | |0 = Edge-detect Brake interrupt for channel0/1 Disabled.
* | | |1 = Edge-detect Brake interrupt for channel0/1 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[1] |BRKEIEN2_3|EPWM Edge-detect Brake Interrupt Enable for Channel2/3 (Write Protect)
* | | |0 = Edge-detect Brake interrupt for channel2/3 Disabled.
* | | |1 = Edge-detect Brake interrupt for channel2/3 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[2] |BRKEIEN4_5|EPWM Edge-detect Brake Interrupt Enable for Channel4/5 (Write Protect)
* | | |0 = Edge-detect Brake interrupt for channel4/5 Disabled.
* | | |1 = Edge-detect Brake interrupt for channel4/5 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[8] |BRKLIEN0_1|EPWM Level-detect Brake Interrupt Enable for Channel0/1 (Write Protect)
* | | |0 = Level-detect Brake interrupt for channel0/1 Disabled.
* | | |1 = Level-detect Brake interrupt for channel0/1 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[9] |BRKLIEN2_3|EPWM Level-detect Brake Interrupt Enable for Channel2/3 (Write Protect)
* | | |0 = Level-detect Brake interrupt for channel2/3 Disabled.
* | | |1 = Level-detect Brake interrupt for channel2/3 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[10] |BRKLIEN4_5|EPWM Level-detect Brake Interrupt Enable for Channel4/5 (Write Protect)
* | | |0 = Level-detect Brake interrupt for channel4/5 Disabled.
* | | |1 = Level-detect Brake interrupt for channel4/5 Enabled.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* @var EPWM_T::INTSTS0
* Offset: 0xE8 EPWM Interrupt Flag Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ZIF0 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[1] |ZIF1 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[2] |ZIF2 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[3] |ZIF3 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[4] |ZIF4 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[5] |ZIF5 |EPWM Zero Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches 0.
* | | |Note: This bit can be cleared to 0 by software writing 1
* |[8] |PIF0 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[9] |PIF1 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[10] |PIF2 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[11] |PIF3 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[12] |PIF4 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[13] |PIF5 |EPWM Period Point Interrupt Flag
* | | |This bit is set by hardware when EPWM counter reaches EPWM_PERIODn.
* | | |Note: This bit can be cleared to 0 by software writing 1.
* |[16] |CMPUIF0 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[17] |CMPUIF1 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[18] |CMPUIF2 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[19] |CMPUIF3 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[20] |CMPUIF4 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[21] |CMPUIF5 |EPWM Compare Up Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter up count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPUIF1, 3, 5 is used as another CMPUIF for channel 0, 2, 4.
* |[24] |CMPDIF0 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* |[25] |CMPDIF1 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* |[26] |CMPDIF2 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* |[27] |CMPDIF3 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* |[28] |CMPDIF4 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* |[29] |CMPDIF5 |EPWM Compare Down Count Interrupt Flag
* | | |Flag is set by hardware when EPWM counter down count and reaches EPWM_CMPDATn, software can clear this bit by writing 1 to it.
* | | |Note: In complementary mode, CMPDIF1, 3, 5 is used as another CMPDIF for channel 0, 2, 4.
* @var EPWM_T::INTSTS1
* Offset: 0xEC EPWM Interrupt Flag Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BRKEIF0 |EPWM Channel0 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel0 edge-detect brake event do not happened.
* | | |1 = When EPWM channel0 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[1] |BRKEIF1 |EPWM Channel1 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel1 edge-detect brake event do not happened.
* | | |1 = When EPWM channel1 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[2] |BRKEIF2 |EPWM Channel2 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel2 edge-detect brake event do not happened.
* | | |1 = When EPWM channel2 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[3] |BRKEIF3 |EPWM Channel3 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel3 edge-detect brake event do not happened.
* | | |1 = When EPWM channel3 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[4] |BRKEIF4 |EPWM Channel4 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel4 edge-detect brake event do not happened.
* | | |1 = When EPWM channel4 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[5] |BRKEIF5 |EPWM Channel5 Edge-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel5 edge-detect brake event do not happened.
* | | |1 = When EPWM channel5 edge-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[8] |BRKLIF0 |EPWM Channel0 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel0 level-detect brake event do not happened.
* | | |1 = When EPWM channel0 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[9] |BRKLIF1 |EPWM Channel1 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel1 level-detect brake event do not happened.
* | | |1 = When EPWM channel1 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[10] |BRKLIF2 |EPWM Channel2 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel2 level-detect brake event do not happened.
* | | |1 = When EPWM channel2 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[11] |BRKLIF3 |EPWM Channel3 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel3 level-detect brake event do not happened.
* | | |1 = When EPWM channel3 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[12] |BRKLIF4 |EPWM Channel4 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel4 level-detect brake event do not happened.
* | | |1 = When EPWM channel4 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[13] |BRKLIF5 |EPWM Channel5 Level-detect Brake Interrupt Flag (Write Protect)
* | | |0 = EPWM channel5 level-detect brake event do not happened.
* | | |1 = When EEPWM channel5 level-detect brake event happened, this bit is set to 1, writing 1 to clear.
* | | |Note: This bit is write protected. Refer toSYS_REGLCTL register.
* |[16] |BRKESTS0 |EPWM Channel0 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel0 edge-detect brake state is released.
* | | |1 = When EPWM channel0 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel0 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[17] |BRKESTS1 |EPWM Channel1 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel1 edge-detect brake state is released.
* | | |1 = When EPWM channel1 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel1 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[18] |BRKESTS2 |EPWM Channel2 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel2 edge-detect brake state is released.
* | | |1 = When EPWM channel2 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel2 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[19] |BRKESTS3 |EPWM Channel3 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel3 edge-detect brake state is released.
* | | |1 = When EPWM channel3 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel3 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[20] |BRKESTS4 |EPWM Channel4 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel4 edge-detect brake state is released.
* | | |1 = When EPWM channel4 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel4 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[21] |BRKESTS5 |EPWM Channel5 Edge-detect Brake Status (Read Only)
* | | |0 = EPWM channel5 edge-detect brake state is released.
* | | |1 = When EPWM channel5 edge-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel5 at brake state, writing 1 to clear.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When edge-detect brake interrupt flag is cleared, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[24] |BRKLSTS0 |EPWM Channel0 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel0 level-detect brake state is released.
* | | |1 = When EPWM channel0 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel0 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[25] |BRKLSTS1 |EPWM Channel1 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel1 level-detect brake state is released.
* | | |1 = When EPWM channel1 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel1 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[26] |BRKLSTS2 |EPWM Channel2 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel2 level-detect brake state is released.
* | | |1 = When EPWM channel2 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel2 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[27] |BRKLSTS3 |EPWM Channel3 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel3 level-detect brake state is released.
* | | |1 = When EPWM channel3 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel3 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[28] |BRKLSTS4 |EPWM Channel4 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel4 level-detect brake state is released.
* | | |1 = When EPWM channel4 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel4 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* |[29] |BRKLSTS5 |EPWM Channel5 Level-detect Brake Status (Read Only)
* | | |0 = EPWM channel5 level-detect brake state is released.
* | | |1 = When EPWM channel5 level-detect brake detects a falling edge of any enabled brake source; this flag will be set to indicate the EPWM channel5 at brake state.
* | | |Note: This bit is read only and auto cleared by hardware
* | | |When enabled brake source return to high level, EPWM will release brake state until current EPWM period finished
* | | |The EPWM waveform will start output from next full EPWM period.
* @var EPWM_T::DACTRGEN
* Offset: 0xF4 EPWM Trigger DAC Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ZTE0 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[1] |ZTE1 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[2] |ZTE2 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[3] |ZTE3 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[4] |ZTE4 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[5] |ZTE5 |EPWM Zero Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to zero if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[8] |PTE0 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[9] |PTE1 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[10] |PTE2 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[11] |PTE3 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[12] |PTE4 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[13] |PTE5 |EPWM Period Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to (PERIODn+1) if this bit is set to1.
* | | |0 = EPWM period point trigger DAC function Disabled.
* | | |1 = EPWM period point trigger DAC function Enabled.
* |[16] |CUTRGEN0 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[17] |CUTRGEN1 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[18] |CUTRGEN2 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[19] |CUTRGEN3 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[20] |CUTRGEN4 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[21] |CUTRGEN5 |EPWM Compare Up Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter counts up to CMP if this bit is set to1.
* | | |0 = EPWM Compare Up point trigger DAC function Disabled.
* | | |1 = EPWM Compare Up point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in down counter type.
* | | |Note 2: In complementary mode, CUTRGEN1, 3, 5 is used as another CUTRGEN for channel 0, 2, 4.
* |[24] |CDTRGEN0 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* |[25] |CDTRGEN1 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* |[26] |CDTRGEN2 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* |[27] |CDTRGEN3 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* |[28] |CDTRGEN4 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* |[29] |CDTRGEN5 |EPWM Compare Down Count Point Trigger DAC Enable Bits
* | | |EPWM can trigger DAC to start action when EPWM counter down count to CMP if this bit is set to1.
* | | |0 = EPWM Compare Down count point trigger DAC function Disabled.
* | | |1 = EPWM Compare Down count point trigger DAC function Enabled.
* | | |Note 1: This bit should keep at 0 when EPWM counter operating in up counter type.
* | | |Note 2: In complementary mode, CDTRGEN1, 3, 5 is used as another CDTRGEN for channel 0, 2, 4.
* @var EPWM_T::EADCTS0
* Offset: 0xF8 EPWM Trigger EADC Source Select Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[4:0] |TRGSEL0 |EPWM_CH0 Trigger EADC Source Select
* | | |00000 = EPWM_CH0 zero point.
* | | |00001 = EPWM_CH0 period point.
* | | |00010 = EPWM_CH0 zero or period point.
* | | |00011 = EPWM_CH0 up-count compared point.
* | | |00100 = EPWM_CH0 down-count compared point.
* | | |00101 = EPWM_CH1 zero point.
* | | |00110 = EPWM_CH1 period point.
* | | |00111 = EPWM_CH1 zero or period point.
* | | |01000 = EPWM_CH1 up-count compared point.
* | | |01001 = EPWM_CH1 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH0 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH1 Interrupt Flag Accumulator Interrupt.
* |[7] |TRGEN0 |EPWM_CH0 Trigger EADC Enable Bit
* | | |0 = EPWM_CH0 Trigger EADC function Disabled.
* | | |1 = EPWM_CH0 Trigger EADC function Enabled.
* |[12:8] |TRGSEL1 |EPWM_CH1 Trigger EADC Source Select
* | | |00000 = EPWM_CH0 zero point.
* | | |00001 = EPWM_CH0 period point.
* | | |00010 = EPWM_CH0 zero or period point.
* | | |00011 = EPWM_CH0 up-count compared point.
* | | |00100 = EPWM_CH0 down-count compared point.
* | | |00101 = EPWM_CH1 zero point.
* | | |00110 = EPWM_CH1 period point.
* | | |00111 = EPWM_CH1 zero or period point.
* | | |01000 = EPWM_CH1 up-count compared point.
* | | |01001 = EPWM_CH1 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH0 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH1 Interrupt Flag Accumulator Interrupt.
* |[15] |TRGEN1 |EPWM_CH1 Trigger EADC Enable Bit
* | | |0 = EPWM_CH1 Trigger EADC function Disabled.
* | | |1 = EPWM_CH1 Trigger EADC function Enabled.
* |[20:16] |TRGSEL2 |EPWM_CH2 Trigger EADC Source Select
* | | |00000 = EPWM_CH2 zero point.
* | | |00001 = EPWM_CH2 period point.
* | | |00010 = EPWM_CH2 zero or period point.
* | | |00011 = EPWM_CH2 up-count compared point.
* | | |00100 = EPWM_CH2 down-count compared point.
* | | |00101 = EPWM_CH3 zero point.
* | | |00110 = EPWM_CH3 period point.
* | | |00111 = EPWM_CH3 zero or period point.
* | | |01000 = EPWM_CH3 up-count compared point.
* | | |01001 = EPWM_CH3 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH2 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH3 Interrupt Flag Accumulator Interrupt.
* |[23] |TRGEN2 |EPWM_CH2 Trigger EADC Enable Bit
* | | |0 = EPWM_CH2 Trigger EADC function Disabled.
* | | |1 = EPWM_CH2 Trigger EADC function Enabled.
* |[28:24] |TRGSEL3 |EPWM_CH3 Trigger EADC Source Select
* | | |00000 = EPWM_CH2 zero point.
* | | |00001 = EPWM_CH2 period point.
* | | |00010 = EPWM_CH2 zero or period point.
* | | |00011 = EPWM_CH2 up-count compared point.
* | | |00100 = EPWM_CH2 down-count compared point.
* | | |00101 = EPWM_CH3 zero point.
* | | |00110 = EPWM_CH3 period point.
* | | |00111 = EPWM_CH3 zero or period point.
* | | |01000 = EPWM_CH3 up-count compared point.
* | | |01001 = EPWM_CH3 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH2 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH3 Interrupt Flag Accumulator Interrupt.
* |[31] |TRGEN3 |EPWM_CH3 Trigger EADC Enable Bit
* | | |0 = EPWM_CH3 Trigger EADC function Disabled.
* | | |1 = EPWM_CH3 Trigger EADC function Enabled.
* @var EPWM_T::EADCTS1
* Offset: 0xFC EPWM Trigger EADC Source Select Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[4:0] |TRGSEL4 |EPWM_CH4 Trigger EADC Source Select
* | | |00000 = EPWM_CH4 zero point.
* | | |00001 = EPWM_CH4 period point.
* | | |00010 = EPWM_CH4 zero or period point.
* | | |00011 = EPWM_CH4 up-count compared point.
* | | |00100 = EPWM_CH4 down-count compared point.
* | | |00101 = EPWM_CH5 zero point.
* | | |00110 = EPWM_CH5 period point.
* | | |00111 = EPWM_CH5 zero or period point.
* | | |01000 = EPWM_CH5 up-count compared point.
* | | |01001 = EPWM_CH5 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH4 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH5 Interrupt Flag Accumulator Interrupt.
* |[7] |TRGEN4 |EPWM_CH4 Trigger EADC Enable Bit
* | | |0 = EPWM_CH4 Trigger EADC function Disabled.
* | | |1 = EPWM_CH4 Trigger EADC function Enabled.
* |[12:8] |TRGSEL5 |EPWM_CH5 Trigger EADC Source Select
* | | |00000 = EPWM_CH4 zero point.
* | | |00001 = EPWM_CH4 period point.
* | | |00010 = EPWM_CH4 zero or period point.
* | | |00011 = EPWM_CH4 up-count compared point.
* | | |00100 = EPWM_CH4 down-count compared point.
* | | |00101 = EPWM_CH5 zero point.
* | | |00110 = EPWM_CH5 period point.
* | | |00111 = EPWM_CH5 zero or period point.
* | | |01000 = EPWM_CH5 up-count compared point.
* | | |01001 = EPWM_CH5 down-count compared point.
* | | |01010 = EPWM_CH0 up-count free trigger compared point.
* | | |01011 = EPWM_CH0 down-count free trigger compared point.
* | | |01100 = EPWM_CH2 up-count free trigger compared point.
* | | |01101 = EPWM_CH2 down-count free trigger compared point.
* | | |01110 = EPWM_CH4 up-count free trigger compared point.
* | | |01111 = EPWM_CH4 down-count free trigger compared point.
* | | |10000 = EPWM_CH4 Interrupt Flag Accumulator Interrupt.
* | | |10001 = EPWM_CH5 Interrupt Flag Accumulator Interrupt.
* |[15] |TRGEN5 |EPWM_CH5 Trigger EADC Enable Bit
* | | |0 = EPWM_CH5 Trigger EADC function Disabled.
* | | |1 = EPWM_CH5 Trigger EADC function Enabled.
* @var EPWM_T::FTCMPDAT[3]
* Offset: 0x100 EPWM Free Trigger Compare Register 0/1,2/3,4/5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FTCMP |EPWM Free Trigger Compare Register
* | | |FTCMP use to compare with even CNT (EPWM_CNTm[15:0], m=0,2,4) to trigger EADC
* | | |EPWM_FTCMPDAT0_1, EPWM_FTCMPDAT2_3, EPWM_FTCMPDAT4_5 corresponding complementary pairs EPWM_CH0and EPWM_CH1, EPWM_CH2 and EPWM_CH3, EPWM_CH4 and EPWM_CH5.
* @var EPWM_T::SSCTL
* Offset: 0x110 EPWM Synchronous Start Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SSEN0 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[1] |SSEN1 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[2] |SSEN2 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[3] |SSEN3 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[4] |SSEN4 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[5] |SSEN5 |EPWM Synchronous Start Function Enable Bits
* | | |When synchronous start function is enabled, the EPWM counter enable register (EPWM_CNTEN) can be enabled by writing EPWM synchronous start trigger bit (CNTSEN).
* | | |0 = EPWM synchronous start function Disabled.
* | | |1 = EPWM synchronous start function Enabled.
* |[9:8] |SSRC |EPWM Synchronous Start Source Select Bits
* | | |00 = Synchronous start source come from EPWM0.
* | | |01 = Synchronous start source come from EPWM1.
* | | |10 = Synchronous start source come from BPWM0.
* | | |11 = Synchronous start source come from BPWM1.
* @var EPWM_T::SSTRG
* Offset: 0x114 EPWM Synchronous Start Trigger Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CNTSEN |EPWM Counter Synchronous Start Enable (Write Only)
* | | |PMW counter synchronous enable function is used to make selected EPWM channels (include EPWM0_CHx and EPWM1_CHx) start counting at the same time.
* | | |Writing this bit to 1 will also set the counter enable bit (CNTENn, n denotes channel 0 to 5) if correlated EPWM channel counter synchronous start function is enabled.
* @var EPWM_T::LEBCTL
* Offset: 0x118 EPWM Leading Edge Blanking Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |LEBEN |EPWM Leading Edge Blanking Enable Bit
* | | |0 = EPWM Leading Edge Blanking Disabled.
* | | |1 = EPWM Leading Edge Blanking Enabled.
* |[8] |SRCEN0 |EPWM Leading Edge Blanking Source From EPWM_CH0 Enable Bit
* | | |0 = EPWM Leading Edge Blanking Source from EPWM_CH0 Disabled.
* | | |1 = EPWM Leading Edge Blanking Source from EPWM_CH0 Enabled.
* |[9] |SRCEN2 |EPWM Leading Edge Blanking Source From EPWM_CH2 Enable Bit
* | | |0 = EPWM Leading Edge Blanking Source from EPWM_CH2 Disabled.
* | | |1 = EPWM Leading Edge Blanking Source from EPWM_CH2 Enabled.
* |[10] |SRCEN4 |EPWM Leading Edge Blanking Source From EPWM_CH4 Enable Bit
* | | |0 = EPWM Leading Edge Blanking Source from EPWM_CH4 Disabled.
* | | |1 = EPWM Leading Edge Blanking Source from EPWM_CH4 Enabled.
* |[17:16] |TRGTYPE |EPWM Leading Edge Blanking Trigger Type
* | | |0 = When detect leading edge blanking source rising edge, blanking counter start counting.
* | | |1 = When detect leading edge blanking source falling edge, blanking counter start counting.
* | | |2 = When detect leading edge blanking source rising or falling edge, blanking counter start counting.
* | | |3 = Reserved.
* @var EPWM_T::LEBCNT
* Offset: 0x11C EPWM Leading Edge Blanking Counter Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[8:0] |LEBCNT |EPWM Leading Edge Blanking Counter
* | | |This counter value decides leading edge blanking window size
* | | |Blanking window size = LEBCNT+1, and LEB counter clock base is ECLK.
* @var EPWM_T::STATUS
* Offset: 0x120 EPWM Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CNTMAXF0 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[1] |CNTMAXF1 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[2] |CNTMAXF2 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[3] |CNTMAXF3 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[4] |CNTMAXF4 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[5] |CNTMAXF5 |Time-base Counter Equal to 0xFFFF Latched Flag
* | | |0 = The time-base counter never reached its maximum value 0xFFFF.
* | | |1 = The time-base counter reached its maximum value.
* | | |Note: This bit can be cleared by software writing 1.
* |[8] |SYNCINF0 |Input Synchronization Latched Flag
* | | |0 = No SYNC_IN event has occurred.
* | | |1 = A SYNC_IN event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[9] |SYNCINF2 |Input Synchronization Latched Flag
* | | |0 = No SYNC_IN event has occurred.
* | | |1 = A SYNC_IN event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[10] |SYNCINF4 |Input Synchronization Latched Flag
* | | |0 = No SYNC_IN event has occurred.
* | | |1 = A SYNC_IN event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[16] |EADCTRGF0 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[17] |EADCTRGF1 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[18] |EADCTRGF2 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[19] |EADCTRGF3 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[20] |EADCTRGF4 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[21] |EADCTRGF5 |EADC Start of Conversion Flag
* | | |0 = No EADC start of conversion trigger event has occurred.
* | | |1 = An EADC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* |[24] |DACTRGF |DAC Start of Conversion Flag
* | | |0 = No DAC start of conversion trigger event has occurred.
* | | |1 = A DAC start of conversion trigger event has occurred.
* | | |Note: This bit can be cleared by software writing 1.
* @var EPWM_T::IFA[6]
* Offset: 0x130 EPWM Interrupt Flag Accumulator Register 0~5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |IFACNT |EPWM_CHn Interrupt Flag Counter
* | | |The register sets the count number which defines (IFACNT+1) times of EPWM_CHn period occurs to set bit IFAIFn to request the EPWM period interrupt.
* | | |EPWM flag will be set in every IFACNT[15:0] times of EPWM period.
* |[24] |STPMOD |EPWM_CHn Accumulator Stop Mode Enable Bits
* | | |0 = EPWM_CHn Stop Mode Disabled.
* | | |1 = EPWM_CHn Stop Mode Enabled.
* |[29:28] |IFASEL |EPWM_CHn Interrupt Flag Accumulator Source Select
* | | |00 = EPWM_CHn zero point.
* | | |01 = EPWM_CHn period in channel n.
* | | |10 = EPWM_CHn up-count compared point.
* | | |11 = EPWM_CHn down-count compared point.
* |[31] |IFAEN |EPWM_CHn Interrupt Flag Accumulator Enable Bits
* | | |0 = EPWM_CHn interrupt flag accumulator disable.
* | | |1 = EPWM_CHn interrupt flag accumulator enable.
* @var EPWM_T::AINTSTS
* Offset: 0x150 EPWM Accumulator Interrupt Flag Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |IFAIF0 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* |[1] |IFAIF1 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* |[2] |IFAIF2 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* |[3] |IFAIF3 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* |[4] |IFAIF4 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* |[5] |IFAIF5 |EPWM_CHn Interrupt Flag Accumulator Interrupt Flag
* | | |Flag is set by hardware when condition match IFASEL in EPWM_IFAn register, software can clear this bit by writing 1 to it.
* @var EPWM_T::AINTEN
* Offset: 0x154 EPWM Accumulator Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |IFAIEN0 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* |[1] |IFAIEN1 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* |[2] |IFAIEN2 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* |[3] |IFAIEN3 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* |[4] |IFAIEN4 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* |[5] |IFAIEN5 |EPWM_CHn Interrupt Flag Accumulator Interrupt Enable Bits
* | | |0 = Interrupt Flag accumulator interrupt Disabled.
* | | |1 = Interrupt Flag accumulator interrupt Enabled.
* @var EPWM_T::APDMACTL
* Offset: 0x158 EPWM Accumulator PDMA Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |APDMAEN0 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* |[1] |APDMAEN1 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* |[2] |APDMAEN2 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* |[3] |APDMAEN3 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* |[4] |APDMAEN4 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* |[5] |APDMAEN5 |Channel n Accumulator PDMA Enable Bits
* | | |0 = Channel n PDMA function Disabled.
* | | |1 = Channel n PDMA function Enabled for the channel n to trigger PDMA to transfer memory data to register.
* @var EPWM_T::FDEN
* Offset: 0x160 EPWM Fault Detect Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FDEN0 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[1] |FDEN1 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[2] |FDEN2 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[3] |FDEN3 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[4] |FDEN4 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[5] |FDEN5 |EPWM Fault Detect Function Enable Bit
* | | |0 = Fault detect function Disabled.
* | | |1 = Fault detect function Enabled.
* |[8] |FDODIS0 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[9] |FDODIS1 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[10] |FDODIS2 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[11] |FDODIS3 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[12] |FDODIS4 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[13] |FDODIS5 |EPWM Channel n Output Fault Detect Disable Bit
* | | |0 = EPWM detect fault and output Enabled.
* | | |1 = EPWM detect fault and output Disabled.
* |[16] |FDCKS0 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* |[17] |FDCKS1 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* |[18] |FDCKS2 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* |[19] |FDCKS3 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* |[20] |FDCKS4 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* |[21] |FDCKS5 |EPWM Channel n Fault Detect Clock Source Select Bit
* | | |0 = EPWMx_CLK, x denotes 0 or 1.
* | | |1 = EPWMx_CLK divide by prescaler, x denotes 0 or 1.
* @var EPWM_T::FDCTL0
* Offset: 0x164 EPWM Fault Detect Control Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDCTL1
* Offset: 0x168 EPWM Fault Detect Control Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDCTL2
* Offset: 0x16C EPWM Fault Detect Control Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDCTL3
* Offset: 0x170 EPWM Fault Detect Control Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDCTL4
* Offset: 0x174 EPWM Fault Detect Control Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDCTL5
* Offset: 0x178 EPWM Fault Detect Control Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |TRMSKCNT |Transition Mask Counter
* | | |The fault detect result will be masked before counter count from 0 to TRMSKCNT.
* | | |1. FDCKS is set to 0:
* | | |Mask time is EPWMx_CLK * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |2. FDCKS is set to 1:
* | | |Mask time EPWMx_CLK * CLKPSC * (2^FDCKSEL) * (TRMSKCNT+2)
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[15] |FDMSKEN |Fault Detect Mask Enable Bit
* | | |0 = Fault detect mask function Disabled.
* | | |1 = Fault detect mask function Enabled.
* |[18:16] |DGSMPCYC |Deglitch Sampling Cycle
* | | |1. FDCKS is set to 0:
* | | |Sampling detect signal each EPWMx_CLK * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |2. FDCKS is set to 1:
* | | |Sampling detect signal each EPWMx_CLK * CLKPSC * (2^FDCKSEL) period and detect DGSMPCYC+1 times
* | | |Note:
* | | |CLKPSC (EPWM_CLKPSCn[11:0]) is 0:
* | | |TRMSKCNT >= DGSMPCYC + 2.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 1:
* | | |TRMSKCNT >= DGSMPCYC + 1.
* | | |FDCKS is 1 and CLKPSC (EPWM_CLKPSCn[11:0]) is 2:
* | | |TRMSKCNT >= DGSMPCYC.
* |[29:28] |FDCKSEL |EPWM Channel Fault Detect Clock Select
* | | |00 = FLT_CLK/1.
* | | |01 = FLT_CLK/2.
* | | |10 = FLT_CLK/4.
* | | |11 = FLT_CLK/8.
* | | |Note: FLT_CLK is FDCKSn (EPWM_FDENn[16+n], n=0,1..5) selected clock.
* |[31] |FDDGEN |Fault Detect Deglitch Enable Bit
* | | |0 = Fault detect deglitch function Disabled.
* | | |1 = Fault detect deglitch function Enabled.
* @var EPWM_T::FDIEN
* Offset: 0x17C EPWM Fault Detect Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FDIENn |EPWM Channel n Fault Detect Interrupt Enable Bit
* | | |0 = EPWM Channel n Fault Detect Interrupt Disabled.
* | | |1 = EPWM Channel n Fault Detect Interrupt Enabled.
* @var EPWM_T::FDSTS
* Offset: 0x180 EPWM Fault Detect Interrupt Flag Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[5:0] |FDIFn |EPWM Channel n Fault Detect Interrupt Flag Bit
* | | |Fault Detect Interrupt Flag will be set when EPWM output short
* | | |Software can clear this bit by writing 1 to it.
* @var EPWM_T::EADCPSCCTL
* Offset: 0x184 EPWM Trigger EADC Prescale Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |PSCEN0 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* |[1] |PSCEN1 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* |[2] |PSCEN2 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* |[3] |PSCEN3 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* |[4] |PSCEN4 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* |[5] |PSCEN5 |EPWM Trigger EADC Pre-scale Function Enable Bits
* | | |0 = EPWM Trigger EADC Pre-scale Function Disabled.
* | | |1 = EPWM Trigger EADC Pre-scale Function Enabled.
* @var EPWM_T::EADCPSC0
* Offset: 0x188 EPWM Trigger EADC Prescale Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |EADCPSC0 |EPWM Channel 0 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC0+1) times of EPWM_CH0 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF0.
* |[11:8] |EADCPSC1 |EPWM Channel 1 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC1+1) times of EPWM_CH1 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF1.
* |[19:16] |EADCPSC2 |EPWM Channel 2 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC2+1) times of EPWM_CH2 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF2.
* |[27:24] |EADCPSC3 |EPWM Channel 3 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC3+1) times of EPWM_CH3 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF3.
* @var EPWM_T::EADCPSC1
* Offset: 0x18C EPWM Trigger EADC Prescale Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |EADCPSC4 |EPWM Channel 4 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC4+1) times of EPWM_CH4 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF4.
* |[11:8] |EADCPSC5 |EPWM Channel 5 Trigger EADC Prescale
* | | |The register sets the count number which defines (EADCPSC5+1) times of EPWM_CH5 trigger EADC event occurs to trigger EADC and set trigger EADC flag bit EADCTRGF5.
* @var EPWM_T::EADCPSCNT0
* Offset: 0x190 EPWM Trigger EADC Prescale Counter Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |PSCNT0 |EPWM Trigger EADC Prescale Counter 0
* | | |User can monitor PSCNT0 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: user can write only when PSCEN0 is 0.
* | | |Note 2: Write data limitation: PSCNT0 < EADCPSC0.
* |[11:8] |PSCNT1 |EPWM Trigger EADC Prescale Counter 1
* | | |User can monitor PSCNT1 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: user can write only when PSCEN1 is 0.
* | | |Note 2: Write data limitation: PSCNT1 < EADCPSC1.
* |[19:16] |PSCNT2 |EPWM Trigger EADC Prescale Counter 2
* | | |User can monitor PSCNT2 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: user can write only when PSCEN2 is 0.
* | | |Note 2: Write data limitation: PSCNT2 < EADCPSC2.
* |[27:24] |PSCNT3 |EPWM Trigger EADC Prescale Counter 3
* | | |User can monitor PSCNT3 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: user can write only when PSCEN3 is 0.
* | | |Note 2: Write data limitation: PSCNT3 < EADCPSC3.
* @var EPWM_T::EADCPSCNT1
* Offset: 0x194 EPWM Trigger EADC Prescale Counter Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |PSCNT4 |EPWM Trigger EADC Prescale Counter 4
* | | |User can monitor PSCNT4 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: User can write only when PSCEN4 is 0.
* | | |Note 2: Write data limitation: PSCNT4 < EADCPSC4.
* |[11:8] |PSCNT5 |EPWM Trigger EADC Prescale Counter 5
* | | |User can monitor PSCNT5 to know the current value in 4-bit trigger EADC prescale counter.
* | | |Note 1: User can write only when PSCEN5 is 0.
* | | |Note 2: Write data limitation: PSCNT5 < EADCPSC5.
* @var EPWM_T::CAPINEN
* Offset: 0x200 EPWM Capture Input Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPINEN0 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* |[1] |CAPINEN1 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* |[2] |CAPINEN2 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* |[3] |CAPINEN3 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* |[4] |CAPINEN4 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* |[5] |CAPINEN5 |Capture Input Enable Bits
* | | |0 = EPWM Channel capture input path Disabled
* | | |The input of EPWM channel capture function is always regarded as 0.
* | | |1 = EPWM Channel capture input path Enabled
* | | |The input of EPWM channel capture function comes from correlative multifunction pin.
* @var EPWM_T::CAPCTL
* Offset: 0x204 EPWM Capture Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPEN0 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[1] |CAPEN1 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[2] |CAPEN2 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[3] |CAPEN3 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[4] |CAPEN4 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[5] |CAPEN5 |Capture Function Enable Bits
* | | |0 = Capture function Disabled. EPWM_RCAPDATn/EPWM_FCAPDATn register will not be updated.
* | | |1 = Capture function Enabled
* | | |Capture latched the EPWM counter value when detected rising or falling edge of input signal and saved to RCAPDAT (Rising latch) and FCAPDAT (Falling latch).
* |[8] |CAPINV0 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[9] |CAPINV1 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[10] |CAPINV2 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[11] |CAPINV3 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[12] |CAPINV4 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[13] |CAPINV5 |Capture Inverter Enable Bits
* | | |0 = Capture source inverter Disabled.
* | | |1 = Capture source inverter Enabled. Reverse the input signal from GPIO.
* |[16] |RCRLDEN0 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[17] |RCRLDEN1 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[18] |RCRLDEN2 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[19] |RCRLDEN3 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[20] |RCRLDEN4 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[21] |RCRLDEN5 |Rising Capture Reload Enable Bits
* | | |0 = Rising capture reload counter Disabled.
* | | |1 = Rising capture reload counter Enabled.
* |[24] |FCRLDEN0 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* |[25] |FCRLDEN1 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* |[26] |FCRLDEN2 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* |[27] |FCRLDEN3 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* |[28] |FCRLDEN4 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* |[29] |FCRLDEN5 |Falling Capture Reload Enable Bits
* | | |0 = Falling capture reload counter Disabled.
* | | |1 = Falling capture reload counter Enabled.
* @var EPWM_T::CAPSTS
* Offset: 0x208 EPWM Capture Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CRLIFOV0 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[1] |CRLIFOV1 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[2] |CRLIFOV2 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[3] |CRLIFOV3 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[4] |CRLIFOV4 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[5] |CRLIFOV5 |Capture Rising Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if rising latch happened when the corresponding CRLIFn(EPWM_CAPIF[n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CRLIFn(EPWM_CAPIF[n]).
* |[8] |CFLIFOV0 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* |[9] |CFLIFOV1 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* |[10] |CFLIFOV2 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* |[11] |CFLIFOV3 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* |[12] |CFLIFOV4 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* |[13] |CFLIFOV5 |Capture Falling Latch Interrupt Flag Overrun Status (Read Only)
* | | |This flag indicates if falling latch happened when the corresponding CFLIFn(EPWM_CAPIF[8+n]) is 1.
* | | |Note: This bit will be cleared automatically when user clears corresponding CFLIFn(EPWM_CAPIF[8+n]).
* @var EPWM_T::RCAPDAT0
* Offset: 0x20C EPWM Rising Capture Data Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT0
* Offset: 0x210 EPWM Falling Capture Data Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::RCAPDAT1
* Offset: 0x214 EPWM Rising Capture Data Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT1
* Offset: 0x218 EPWM Falling Capture Data Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::RCAPDAT2
* Offset: 0x21C EPWM Rising Capture Data Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT2
* Offset: 0x220 EPWM Falling Capture Data Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::RCAPDAT3
* Offset: 0x224 EPWM Rising Capture Data Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT3
* Offset: 0x228 EPWM Falling Capture Data Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::RCAPDAT4
* Offset: 0x22C EPWM Rising Capture Data Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT4
* Offset: 0x230 EPWM Falling Capture Data Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::RCAPDAT5
* Offset: 0x234 EPWM Rising Capture Data Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |RCAPDAT |EPWM Rising Capture Data Register (Read Only)
* | | |When rising capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::FCAPDAT5
* Offset: 0x238 EPWM Falling Capture Data Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FCAPDAT |EPWM Falling Capture Data Register (Read Only)
* | | |When falling capture condition happened, the EPWM counter value will be saved in this register.
* @var EPWM_T::PDMACTL
* Offset: 0x23C EPWM PDMA Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CHEN0_1 |Channel 0/1 PDMA Enable Bit
* | | |0 = Channel 0/1 PDMA function Disabled.
* | | |1 = Channel 0/1 PDMA function Enabled for the channel 0/1 captured data and transfer to memory.
* |[2:1] |CAPMOD0_1 |Select EPWM_RCAPDAT0/1 or EPWM_FCAPDAT0/1 to Do PDMA Transfer
* | | |00 = Reserved.
* | | |01 = EPWM_RCAPDAT0/1.
* | | |10 = EPWM_FCAPDAT0/1.
* | | |11 = Both EPWM_RCAPDAT0/1 and EPWM_FCAPDAT0/1.
* |[3] |CAPORD0_1 |Capture Channel 0/1 Rising/Falling Order
* | | |Set this bit to determine whether the EPWM_RCAPDAT0/1 or EPWM_FCAPDAT0/1 is the first captured data transferred to memory through PDMA when CAPMOD0_1 =11.
* | | |0 = EPWM_FCAPDAT0/1 is the first captured data to memory.
* | | |1 = EPWM_RCAPDAT0/1 is the first captured data to memory.
* |[4] |CHSEL0_1 |Select Channel 0/1 to Do PDMA Transfer
* | | |0 = Channel0.
* | | |1 = Channel1.
* |[8] |CHEN2_3 |Channel 2/3 PDMA Enable Bit
* | | |0 = Channel 2/3 PDMA function Disabled.
* | | |1 = Channel 2/3 PDMA function Enabled for the channel 2/3 captured data and transfer to memory.
* |[10:9] |CAPMOD2_3 |Select EPWM_RCAPDAT2/3 or EPWM_FCAODAT2/3 to Do PDMA Transfer
* | | |00 = Reserved.
* | | |01 = EPWM_RCAPDAT2/3.
* | | |10 = EPWM_FCAPDAT2/3.
* | | |11 = Both EPWM_RCAPDAT2/3 and EPWM_FCAPDAT2/3.
* |[11] |CAPORD2_3 |Capture Channel 2/3 Rising/Falling Order
* | | |Set this bit to determine whether the EPWM_RCAPDAT2/3 or EPWM_FCAPDAT2/3 is the first captured data transferred to memory through PDMA when CAPMOD2_3 =11.
* | | |0 = EPWM_FCAPDAT2/3 is the first captured data to memory.
* | | |1 = EPWM_RCAPDAT2/3 is the first captured data to memory.
* |[12] |CHSEL2_3 |Select Channel 2/3 to Do PDMA Transfer
* | | |0 = Channel2.
* | | |1 = Channel3.
* |[16] |CHEN4_5 |Channel 4/5 PDMA Enable Bit
* | | |0 = Channel 4/5 PDMA function Disabled.
* | | |1 = Channel 4/5 PDMA function Enabled for the channel 4/5 captured data and transfer to memory.
* |[18:17] |CAPMOD4_5 |Select EPWM_RCAPDAT4/5 or EPWM_FCAPDAT4/5 to Do PDMA Transfer
* | | |00 = Reserved.
* | | |01 = EPWM_RCAPDAT4/5.
* | | |10 = EPWM_FCAPDAT4/5.
* | | |11 = Both EPWM_RCAPDAT4/5 and EPWM_FCAPDAT4/5.
* |[19] |CAPORD4_5 |Capture Channel 4/5 Rising/Falling Order
* | | |Set this bit to determine whether the EPWM_RCAPDAT4/5 or EPWM_FCAPDAT4/5 is the first captured data transferred to memory through PDMA when CAPMOD4_5 =11.
* | | |0 = EPWM_FCAPDAT4/5 is the first captured data to memory.
* | | |1 = EPWM_RCAPDAT4/5 is the first captured data to memory.
* |[20] |CHSEL4_5 |Select Channel 4/5 to Do PDMA Transfer
* | | |0 = Channel4.
* | | |1 = Channel5.
* @var EPWM_T::PDMACAP[3]
* Offset: 0x240 EPWM Capture Channel 01 PDMA Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |CAPBUF |EPWM Capture PDMA Register (Read Only)
* | | |This register is used as a buffer to transfer EPWM capture rising or falling data to memory by PDMA.
* @var EPWM_T::CAPIEN
* Offset: 0x250 EPWM Capture Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPRIEN0 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[1] |CAPRIEN1 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[2] |CAPRIEN2 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[3] |CAPRIEN3 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[4] |CAPRIEN4 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[5] |CAPRIEN5 |EPWM Capture Rising Latch Interrupt Enable Bits
* | | |0 = Capture rising edge latch interrupt Disabled.
* | | |1 = Capture rising edge latch interrupt Enabled.
* |[8] |CAPFIEN0 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* |[9] |CAPFIEN1 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* |[10] |CAPFIEN2 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* |[11] |CAPFIEN3 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* |[12] |CAPFIEN4 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* |[13] |CAPFIEN5 |EPWM Capture Falling Latch Interrupt Enable Bits
* | | |0 = Capture falling edge latch interrupt Disabled.
* | | |1 = Capture falling edge latch interrupt Enabled.
* @var EPWM_T::CAPIF
* Offset: 0x254 EPWM Capture Interrupt Flag Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CRLIF0 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[1] |CRLIF1 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[2] |CRLIF2 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[3] |CRLIF3 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[4] |CRLIF4 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[5] |CRLIF5 |EPWM Capture Rising Latch Interrupt Flag
* | | |0 = No capture rising latch condition happened.
* | | |1 = Capture rising latch condition happened, this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CRLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[8] |CFLIF0 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[9] |CFLIF1 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[10] |CFLIF2 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[11] |CFLIF3 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[12] |CFLIF4 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* |[13] |CFLIF5 |EPWM Capture Falling Latch Interrupt Flag
* | | |0 = No capture falling latch condition happened.
* | | |1 = Capture falling latch condition happened, and this flag will be set to high.
* | | |Note 1: When Capture with PDMA operating, EPWM_CAPIF corresponding channel CFLIFn will be cleared by hardware after PDMA transfer data.
* | | |Note 2: This bit is cleared by writing 1 to it.
* @var EPWM_T::CAPNF0
* Offset: 0x258 EPWM Capture Input Noise Filter Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::CAPNF1
* Offset: 0x25C EPWM Capture Input Noise Filter Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::CAPNF2
* Offset: 0x260 EPWM Capture Input Noise Filter Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::CAPNF3
* Offset: 0x264 EPWM Capture Input Noise Filter Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::CAPNF4
* Offset: 0x268 EPWM Capture Input Noise Filter Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::CAPNF5
* Offset: 0x26C EPWM Capture Input Noise Filter Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |CAPNFEN |Capture Noise Filter Enable
* | | |0 = Capture Noise Filter function Disabled.
* | | |1 = Capture Noise Filter function Enabled.
* |[6:4] |CAPNFSEL |Capture Edge Detector Noise Filter Clock Selection
* | | |000 = Filter clock = PCLK.
* | | |001 = Filter clock = PCLK/2.
* | | |010 = Filter clock = PCLK/4.
* | | |011 = Filter clock = PCLK/8.
* | | |100 = Filter clock = PCLK/16.
* | | |101 = Filter clock = PCLK/32.
* | | |110 = Filter clock = PCLK/64.
* | | |111 = Filter clock = PCLK/128.
* |[10:8] |CAPNFCNT |Capture Edge Detector Noise Filter Count
* | | |The register bits control the capture filter counter to count from 0 to CAPNFCNT.
* @var EPWM_T::EXTETCTL0
* Offset: 0x270 EPWM External Event Trigger Control Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::EXTETCTL1
* Offset: 0x274 EPWM External Event Trigger Control Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::EXTETCTL2
* Offset: 0x278 EPWM External Event Trigger Control Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::EXTETCTL3
* Offset: 0x27C EPWM External Event Trigger Control Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::EXTETCTL4
* Offset: 0x280 EPWM External Event Trigger Control Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::EXTETCTL5
* Offset: 0x284 EPWM External Event Trigger Control Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EXETEN |External Event Trigger Enable Bit
* | | |0 = External Event Trigger function Disabled.
* | | |1 = External Event Trigger function Enabled.
* |[5:4] |CNTACTS |Counter Action Selection
* | | |00 = Counter reset.
* | | |01 = Counter start.
* | | |10 = Counter reset and start.
* | | |11 = Reserved.
* |[11:8] |EXTTRGS |External Trigger Selection
* | | |0000 = INT0.
* | | |0001 = INT1.
* | | |0010 = INT2.
* | | |0011 = INT3.
* | | |0100 = INT4.
* | | |0101 = INT5.
* | | |0110 = INT6.
* | | |0111 = INT7.
* | | |Other = Reserved.
* @var EPWM_T::SWEOFCTL
* Offset: 0x288 EPWM Software Event Output Force Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |OUTACTS0 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* |[3:2] |OUTACTS1 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* |[5:4] |OUTACTS2 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* |[7:6] |OUTACTS3 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* |[9:8] |OUTACTS4 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* |[11:10] |OUTACTS5 |Output Action Selection
* | | |00 = Do nothing.
* | | |01 = EPWM output Low.
* | | |10 = EPWM output High.
* | | |11 = EPWM output Toggle.
* @var EPWM_T::SWEOFTRG
* Offset: 0x28C EPWM Software Event Output Force Trigger Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SWETRG0 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* |[1] |SWETRG1 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* |[2] |SWETRG2 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* |[3] |SWETRG3 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* |[4] |SWETRG4 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* |[5] |SWETRG5 |Software Event Trigger
* | | |Write 1 to this bit will change EPWM output status according to OUTACTSn in EPWMx_SWEOFCTL setting.
* | | |Note: This bit will auto cleared by hardware.
* @var EPWM_T::CLKPSC0
* Offset: 0x290 EPWM Clock Prescale Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::CLKPSC1
* Offset: 0x294 EPWM Clock Prescale Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::CLKPSC2
* Offset: 0x298 EPWM Clock Prescale Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::CLKPSC3
* Offset: 0x29C EPWM Clock Prescale Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::CLKPSC4
* Offset: 0x2A0 EPWM Clock Prescale Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::CLKPSC5
* Offset: 0x2A4 EPWM Clock Prescale Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CLKPSC |EPWM Counter Clock Prescale
* | | |The clock of EPWM counter is decided by clock prescaler
* | | |Each EPWM pair shares one EPWM counter clock prescaler
* | | |The clock of EPWM counter is divided by (CLKPSC+ 1)
* @var EPWM_T::RDTCNT0_1
* Offset: 0x2A8 EPWM Rising Dead-time Counter Register 0/1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |RDTCNT |Rising Dead-time Counter (Write Protect)
* | | |The Rising dead-time can be calculated from the following formula:
* | | |RDTCKSEL=0: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period.
* | | |RDTCKSEL=1: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::RDTCNT2_3
* Offset: 0x2AC EPWM Rising Dead-time Counter Register 2/3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |RDTCNT |Rising Dead-time Counter (Write Protect)
* | | |The Rising dead-time can be calculated from the following formula:
* | | |RDTCKSEL=0: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period.
* | | |RDTCKSEL=1: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::RDTCNT4_5
* Offset: 0x2B0 EPWM Rising Dead-time Counter Register 4/5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |RDTCNT |Rising Dead-time Counter (Write Protect)
* | | |The Rising dead-time can be calculated from the following formula:
* | | |RDTCKSEL=0: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period.
* | | |RDTCKSEL=1: Rising Dead-time = (RDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::FDTCNT0_1
* Offset: 0x2B4 EPWM Falling Dead-time Counter Register 0/1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |FDTCNT |Falling Dead-time Counter (Write Protect)
* | | |The dead-time can be calculated from the following formula:
* | | |FDTCKSEL=0: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period.
* | | |FDTCKSEL=1: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::FDTCNT2_3
* Offset: 0x2B8 EPWM Falling Dead-time Counter Register 2/3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |FDTCNT |Falling Dead-time Counter (Write Protect)
* | | |The dead-time can be calculated from the following formula:
* | | |FDTCKSEL=0: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period.
* | | |FDTCKSEL=1: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::FDTCNT4_5
* Offset: 0x2BC EPWM Falling Dead-time Counter Register 4/5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |FDTCNT |Falling Dead-time Counter (Write Protect)
* | | |The dead-time can be calculated from the following formula:
* | | |FDTCKSEL=0: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period.
* | | |FDTCKSEL=1: Falling Dead-time = (FDTCNT[11:0]+1) * EPWM_CLK period * (CLKPSC+1).
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::DTCTL
* Offset: 0x2C0 EPWM Dead-time Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |RDTEN0 |Enable Rising Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Rising Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If rising dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Rising Dead-time insertion Disabled on the pin pair.
* | | |1 = Rising Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[1] |RDTEN2 |Enable Rising Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Rising Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If rising dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Rising Dead-time insertion Disabled on the pin pair.
* | | |1 = Rising Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[2] |RDTEN4 |Enable Rising Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Rising Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If rising dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Rising Dead-time insertion Disabled on the pin pair.
* | | |1 = Rising Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[8] |FDTEN0 |Enable Falling Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Falling Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If falling dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Falling Dead-time insertion Disabled on the pin pair.
* | | |1 = Falling Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[9] |FDTEN2 |Enable Falling Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Falling Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If falling dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Falling Dead-time insertion Disabled on the pin pair.
* | | |1 = Falling Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[10] |FDTEN4 |Enable Falling Dead-time Insertion for EPWM Pair (Write Protect)
* | | |Falling Dead-time insertion is only active when this pair of complementary EPWM is enabled
* | | |If falling dead- time insertion is inactive, the outputs of pin pair are complementary without any delay.
* | | |0 = Falling Dead-time insertion Disabled on the pin pair.
* | | |1 = Falling Dead-time insertion Enabled on the pin pair.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* |[16] |DTCKSELn |Dead-time Clock Select for EPWM Pair (Write Protect)
* | | |0 = Dead-time clock source from EPWM_CLK.
* | | |1 = Dead-time clock source from prescaler output.
* | | |Note: This bit is write protected. Refer to SYS_REGLCTL register.
* @var EPWM_T::PBUF[6]
* Offset: 0x304 EPWM PERIOD0~5 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |PBUF |EPWM Period Register Buffer (Read Only)
* | | |Used as PERIOD active register.
* @var EPWM_T::CMPBUF[6]
* Offset: 0x31C EPWM CMPDAT0~5 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |CMPBUF |EPWM Comparator Register Buffer (Read Only)
* | | |Used as CMP active register.
* @var EPWM_T::CPSCBUF[3]
* Offset: 0x334 EPWM CLKPSC0_1/2_3/4_5 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Use as EPWM counter clock prescale active register.
* @var EPWM_T::FTCBUF[3]
* Offset: 0x340 EPWM FTCMPDAT0_1/2_3/4_5 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |FTCMPBUF |EPWM FTCMPDAT Buffer (Read Only)
* | | |Used as FTCMP active buffer.
* @var EPWM_T::FTCI
* Offset: 0x34C EPWM FTCMPDAT Indicator Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FTCMU0 |EPWM FTCMPDAT Up Indicator
* | | |Indicator is set by hardware when EPWM counter up counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* |[1] |FTCMU2 |EPWM FTCMPDAT Up Indicator
* | | |Indicator is set by hardware when EPWM counter up counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* |[2] |FTCMU4 |EPWM FTCMPDAT Up Indicator
* | | |Indicator is set by hardware when EPWM counter up counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* |[8] |FTCMD0 |EPWM FTCMPDAT Down Indicator
* | | |Indicator is set by hardware when EPWM counter down counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* |[9] |FTCMD2 |EPWM FTCMPDAT Down Indicator
* | | |Indicator is set by hardware when EPWM counter down counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* |[10] |FTCMD4 |EPWM FTCMPDAT Down Indicator
* | | |Indicator is set by hardware when EPWM counter down counts and reaches EPWM_FTCMPDATn
* | | |Software can clear this bit by writing 1 to it.
* @var EPWM_T::CPSCBUF0
* Offset: 0x350 EPWM CLKPSC0 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::CPSCBUF1
* Offset: 0x354 EPWM CLKPSC1 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::CPSCBUF2
* Offset: 0x358 EPWM CLKPSC2 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::CPSCBUF3
* Offset: 0x35C EPWM CLKPSC3 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::CPSCBUF4
* Offset: 0x360 EPWM CLKPSC4 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::CPSCBUF5
* Offset: 0x364 EPWM CLKPSC5 Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |CPSCBUF |EPWM Counter Clock Prescale Buffer
* | | |Used as EPWM counter clock pre-scare active register.
* @var EPWM_T::IFACNT0
* Offset: 0x368 EPWM Interrupt Flag Accumulator Counter 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
* @var EPWM_T::IFACNT1
* Offset: 0x36C EPWM Interrupt Flag Accumulator Counter 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
* @var EPWM_T::IFACNT2
* Offset: 0x370 EPWM Interrupt Flag Accumulator Counter 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
* @var EPWM_T::IFACNT3
* Offset: 0x374 EPWM Interrupt Flag Accumulator Counter 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
* @var EPWM_T::IFACNT4
* Offset: 0x378 EPWM Interrupt Flag Accumulator Counter 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
* @var EPWM_T::IFACNT5
* Offset: 0x37C EPWM Interrupt Flag Accumulator Counter 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |ACUCNT |Accumulator Counter (Read Only)
* | | |This value indicates how many interrupt are accumulated when using interrupt flag accumulator function.
*/
__IO uint32_t CTL0; /*!< [0x0000] EPWM Control Register 0 */
__IO uint32_t CTL1; /*!< [0x0004] EPWM Control Register 1 */
__IO uint32_t SYNC; /*!< [0x0008] EPWM Synchronization Register */
__IO uint32_t SWSYNC; /*!< [0x000c] EPWM Software Control Synchronization Register */
__IO uint32_t CLKSRC; /*!< [0x0010] EPWM Clock Source Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE0[3];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t CNTEN; /*!< [0x0020] EPWM Counter Enable Register */
__IO uint32_t CNTCLR; /*!< [0x0024] EPWM Clear Counter Register */
__IO uint32_t LOAD; /*!< [0x0028] EPWM Load Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE1[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t PERIOD[6]; /*!< [0x0030] EPWM Period Register 0~5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE2[2];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t CMPDAT[6]; /*!< [0x0050] EPWM Comparator Register 0~5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE3[6];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t PHS[3]; /*!< [0x0080] EPWM Counter Phase Register 0/1,2/3,4/5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE4[1];
/// @endcond //HIDDEN_SYMBOLS
__I uint32_t CNT[6]; /*!< [0x0090] EPWM Counter Register 0~5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE5[2];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t WGCTL0; /*!< [0x00b0] EPWM Generation Register 0 */
__IO uint32_t WGCTL1; /*!< [0x00b4] EPWM Generation Register 1 */
__IO uint32_t MSKEN; /*!< [0x00b8] EPWM Mask Enable Register */
__IO uint32_t MSK; /*!< [0x00bc] EPWM Mask Data Register */
__IO uint32_t BNF; /*!< [0x00c0] EPWM Brake Noise Filter Register */
__IO uint32_t FAILBRK; /*!< [0x00c4] EPWM System Fail Brake Control Register */
__IO uint32_t BRKCTL[3]; /*!< [0x00c8] EPWM Brake Edge Detect Control Register 0/1,2/3,4/5 */
__IO uint32_t POLCTL; /*!< [0x00d4] EPWM Pin Polar Inverse Register */
__IO uint32_t POEN; /*!< [0x00d8] EPWM Output Enable Register */
__O uint32_t SWBRK; /*!< [0x00dc] EPWM Software Brake Control Register */
__IO uint32_t INTEN0; /*!< [0x00e0] EPWM Interrupt Enable Register 0 */
__IO uint32_t INTEN1; /*!< [0x00e4] EPWM Interrupt Enable Register 1 */
__IO uint32_t INTSTS0; /*!< [0x00e8] EPWM Interrupt Flag Register 0 */
__IO uint32_t INTSTS1; /*!< [0x00ec] EPWM Interrupt Flag Register 1 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE6[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t DACTRGEN; /*!< [0x00f4] EPWM Trigger DAC Enable Register */
__IO uint32_t EADCTS0; /*!< [0x00f8] EPWM Trigger EADC Source Select Register 0 */
__IO uint32_t EADCTS1; /*!< [0x00fc] EPWM Trigger EADC Source Select Register 1 */
__IO uint32_t FTCMPDAT[3]; /*!< [0x0100] EPWM Free Trigger Compare Register 0/1,2/3,4/5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE7[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t SSCTL; /*!< [0x0110] EPWM Synchronous Start Control Register */
__O uint32_t SSTRG; /*!< [0x0114] EPWM Synchronous Start Trigger Register */
__IO uint32_t LEBCTL; /*!< [0x0118] EPWM Leading Edge Blanking Control Register */
__IO uint32_t LEBCNT; /*!< [0x011c] EPWM Leading Edge Blanking Counter Register */
__IO uint32_t STATUS; /*!< [0x0120] EPWM Status Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE8[3];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t IFA[6]; /*!< [0x0130] EPWM Interrupt Flag Accumulator Register 0~5 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE9[2];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t AINTSTS; /*!< [0x0150] EPWM Accumulator Interrupt Flag Register */
__IO uint32_t AINTEN; /*!< [0x0154] EPWM Accumulator Interrupt Enable Register */
__IO uint32_t APDMACTL; /*!< [0x0158] EPWM Accumulator PDMA Control Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE10[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t FDEN; /*!< [0x0160] EPWM Fault Detect Enable Register */
__IO uint32_t FDCTL[6]; /*!< [0x0164~0x178] EPWM Fault Detect Control Register 0~5 */
__IO uint32_t FDIEN; /*!< [0x017C] EPWM Fault Detect Interrupt Enable Register */
__IO uint32_t FDSTS; /*!< [0x0180] EPWM Fault Detect Interrupt Flag Register */
__IO uint32_t EADCPSCCTL; /*!< [0x0184] EPWM Trigger EADC Prescale Control Register */
__IO uint32_t EADCPSC0; /*!< [0x0188] EPWM Trigger EADC Prescale Register 0 */
__IO uint32_t EADCPSC1; /*!< [0x018C] EPWM Trigger EADC Prescale Register 1 */
__IO uint32_t EADCPSCNT0; /*!< [0x0190] EPWM Trigger EADC Prescale Counter Register 0 */
__IO uint32_t EADCPSCNT1; /*!< [0x0194] EPWM Trigger EADC Prescale Counter Register 1 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE11[26];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t CAPINEN; /*!< [0x0200] EPWM Capture Input Enable Register */
__IO uint32_t CAPCTL; /*!< [0x0204] EPWM Capture Control Register */
__I uint32_t CAPSTS; /*!< [0x0208] EPWM Capture Status Register */
ECAPDAT_T CAPDAT[6]; /*!< [0x020C] EPWM Rising and Falling Capture Data Register 0~5 */
__IO uint32_t PDMACTL; /*!< [0x023c] EPWM PDMA Control Register */
__I uint32_t PDMACAP[3]; /*!< [0x0240] EPWM Capture Channel 01,23,45 PDMA Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE12[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t CAPIEN; /*!< [0x0250] EPWM Capture Interrupt Enable Register */
__IO uint32_t CAPIF; /*!< [0x0254] EPWM Capture Interrupt Flag Register */
__IO uint32_t CAPNF[6]; /*!< [0x0258~0x26C] EPWM Capture Input Noise Filter Register 0~5 */
__IO uint32_t EXTETCTL[6]; /*!< [0x0270~0x284] EPWM External Event Trigger Control Register 0~5 */
__IO uint32_t SWEOFCTL; /*!< [0x0288] EPWM Software Event Output Force Control Register */
__IO uint32_t SWEOFTRG; /*!< [0x028C] EPWM Software Event Output Force Trigger Register */
__IO uint32_t CLKPSC[6]; /*!< [0x0290~0x2A4] EPWM Clock Prescale Register 0~5 */
__IO uint32_t RDTCNT[3]; /*!< [0x02A8~0x2B0] EPWM Rising Dead-time Counter Register 0/1, 2/3, 4/5 */
__IO uint32_t FDTCNT[3]; /*!< [0x02B4~0x2BC] EPWM Falling Dead-time Counter Register 0/1, 2/3, 4/5 */
__IO uint32_t DTCTL; /*!< [0x02C0] EPWM Dead-Time Control Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE13[16];
/// @endcond //HIDDEN_SYMBOLS
__I uint32_t PBUF[6]; /*!< [0x0304] EPWM PERIOD0~5 Buffer */
__I uint32_t CMPBUF[6]; /*!< [0x031c] EPWM CMPDAT0~5 Buffer */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE14[3];
/// @endcond //HIDDEN_SYMBOLS
__I uint32_t FTCBUF[3]; /*!< [0x0340] EPWM FTCMPDAT0_1/2_3/4_5 Buffer */
__IO uint32_t FTCI; /*!< [0x034c] EPWM FTCMPDAT Indicator Register */
__I uint32_t CPSCBUF[5]; /*!< [0x0350~0x364] EPWM CLKPSC0~5 Buffer */
__I uint32_t IFACNT[5]; /*!< [0x0368~0x37C] EPWM Interrupt Flag Accumulator Counter 0~5 */
} EPWM_T;
/**
@addtogroup EPWM_CONST EPWM Bit Field Definition
Constant Definitions for EPWM Controller
@{ */
#define EPWM_CTL0_CTRLD0_Pos (0) /*!< EPWM_T::CTL0: CTRLD0 Position */
#define EPWM_CTL0_CTRLD0_Msk (0x1ul << EPWM_CTL0_CTRLD0_Pos) /*!< EPWM_T::CTL0: CTRLD0 Mask */
#define EPWM_CTL0_CTRLD1_Pos (1) /*!< EPWM_T::CTL0: CTRLD1 Position */
#define EPWM_CTL0_CTRLD1_Msk (0x1ul << EPWM_CTL0_CTRLD1_Pos) /*!< EPWM_T::CTL0: CTRLD1 Mask */
#define EPWM_CTL0_CTRLD2_Pos (2) /*!< EPWM_T::CTL0: CTRLD2 Position */
#define EPWM_CTL0_CTRLD2_Msk (0x1ul << EPWM_CTL0_CTRLD2_Pos) /*!< EPWM_T::CTL0: CTRLD2 Mask */
#define EPWM_CTL0_CTRLD3_Pos (3) /*!< EPWM_T::CTL0: CTRLD3 Position */
#define EPWM_CTL0_CTRLD3_Msk (0x1ul << EPWM_CTL0_CTRLD3_Pos) /*!< EPWM_T::CTL0: CTRLD3 Mask */
#define EPWM_CTL0_CTRLD4_Pos (4) /*!< EPWM_T::CTL0: CTRLD4 Position */
#define EPWM_CTL0_CTRLD4_Msk (0x1ul << EPWM_CTL0_CTRLD4_Pos) /*!< EPWM_T::CTL0: CTRLD4 Mask */
#define EPWM_CTL0_CTRLD5_Pos (5) /*!< EPWM_T::CTL0: CTRLD5 Position */
#define EPWM_CTL0_CTRLD5_Msk (0x1ul << EPWM_CTL0_CTRLD5_Pos) /*!< EPWM_T::CTL0: CTRLD5 Mask */
#define EPWM_CTL0_WINLDEN0_Pos (8) /*!< EPWM_T::CTL0: WINLDEN0 Position */
#define EPWM_CTL0_WINLDEN0_Msk (0x1ul << EPWM_CTL0_WINLDEN0_Pos) /*!< EPWM_T::CTL0: WINLDEN0 Mask */
#define EPWM_CTL0_WINLDEN1_Pos (9) /*!< EPWM_T::CTL0: WINLDEN1 Position */
#define EPWM_CTL0_WINLDEN1_Msk (0x1ul << EPWM_CTL0_WINLDEN1_Pos) /*!< EPWM_T::CTL0: WINLDEN1 Mask */
#define EPWM_CTL0_WINLDEN2_Pos (10) /*!< EPWM_T::CTL0: WINLDEN2 Position */
#define EPWM_CTL0_WINLDEN2_Msk (0x1ul << EPWM_CTL0_WINLDEN2_Pos) /*!< EPWM_T::CTL0: WINLDEN2 Mask */
#define EPWM_CTL0_WINLDEN3_Pos (11) /*!< EPWM_T::CTL0: WINLDEN3 Position */
#define EPWM_CTL0_WINLDEN3_Msk (0x1ul << EPWM_CTL0_WINLDEN3_Pos) /*!< EPWM_T::CTL0: WINLDEN3 Mask */
#define EPWM_CTL0_WINLDEN4_Pos (12) /*!< EPWM_T::CTL0: WINLDEN4 Position */
#define EPWM_CTL0_WINLDEN4_Msk (0x1ul << EPWM_CTL0_WINLDEN4_Pos) /*!< EPWM_T::CTL0: WINLDEN4 Mask */
#define EPWM_CTL0_WINLDEN5_Pos (13) /*!< EPWM_T::CTL0: WINLDEN5 Position */
#define EPWM_CTL0_WINLDEN5_Msk (0x1ul << EPWM_CTL0_WINLDEN5_Pos) /*!< EPWM_T::CTL0: WINLDEN5 Mask */
#define EPWM_CTL0_IMMLDEN0_Pos (16) /*!< EPWM_T::CTL0: IMMLDEN0 Position */
#define EPWM_CTL0_IMMLDEN0_Msk (0x1ul << EPWM_CTL0_IMMLDEN0_Pos) /*!< EPWM_T::CTL0: IMMLDEN0 Mask */
#define EPWM_CTL0_IMMLDEN1_Pos (17) /*!< EPWM_T::CTL0: IMMLDEN1 Position */
#define EPWM_CTL0_IMMLDEN1_Msk (0x1ul << EPWM_CTL0_IMMLDEN1_Pos) /*!< EPWM_T::CTL0: IMMLDEN1 Mask */
#define EPWM_CTL0_IMMLDEN2_Pos (18) /*!< EPWM_T::CTL0: IMMLDEN2 Position */
#define EPWM_CTL0_IMMLDEN2_Msk (0x1ul << EPWM_CTL0_IMMLDEN2_Pos) /*!< EPWM_T::CTL0: IMMLDEN2 Mask */
#define EPWM_CTL0_IMMLDEN3_Pos (19) /*!< EPWM_T::CTL0: IMMLDEN3 Position */
#define EPWM_CTL0_IMMLDEN3_Msk (0x1ul << EPWM_CTL0_IMMLDEN3_Pos) /*!< EPWM_T::CTL0: IMMLDEN3 Mask */
#define EPWM_CTL0_IMMLDEN4_Pos (20) /*!< EPWM_T::CTL0: IMMLDEN4 Position */
#define EPWM_CTL0_IMMLDEN4_Msk (0x1ul << EPWM_CTL0_IMMLDEN4_Pos) /*!< EPWM_T::CTL0: IMMLDEN4 Mask */
#define EPWM_CTL0_IMMLDEN5_Pos (21) /*!< EPWM_T::CTL0: IMMLDEN5 Position */
#define EPWM_CTL0_IMMLDEN5_Msk (0x1ul << EPWM_CTL0_IMMLDEN5_Pos) /*!< EPWM_T::CTL0: IMMLDEN5 Mask */
#define EPWM_CTL0_GROUPEN_Pos (24) /*!< EPWM_T::CTL0: GROUPEN Position */
#define EPWM_CTL0_GROUPEN_Msk (0x1ul << EPWM_CTL0_GROUPEN_Pos) /*!< EPWM_T::CTL0: GROUPEN Mask */
#define EPWM_CTL0_DBGHALT_Pos (30) /*!< EPWM_T::CTL0: DBGHALT Position */
#define EPWM_CTL0_DBGHALT_Msk (0x1ul << EPWM_CTL0_DBGHALT_Pos) /*!< EPWM_T::CTL0: DBGHALT Mask */
#define EPWM_CTL0_DBGTRIOFF_Pos (31) /*!< EPWM_T::CTL0: DBGTRIOFF Position */
#define EPWM_CTL0_DBGTRIOFF_Msk (0x1ul << EPWM_CTL0_DBGTRIOFF_Pos) /*!< EPWM_T::CTL0: DBGTRIOFF Mask */
#define EPWM_CTL1_CNTTYPE0_Pos (0) /*!< EPWM_T::CTL1: CNTTYPE0 Position */
#define EPWM_CTL1_CNTTYPE0_Msk (0x3ul << EPWM_CTL1_CNTTYPE0_Pos) /*!< EPWM_T::CTL1: CNTTYPE0 Mask */
#define EPWM_CTL1_CNTTYPE1_Pos (2) /*!< EPWM_T::CTL1: CNTTYPE1 Position */
#define EPWM_CTL1_CNTTYPE1_Msk (0x3ul << EPWM_CTL1_CNTTYPE1_Pos) /*!< EPWM_T::CTL1: CNTTYPE1 Mask */
#define EPWM_CTL1_CNTTYPE2_Pos (4) /*!< EPWM_T::CTL1: CNTTYPE2 Position */
#define EPWM_CTL1_CNTTYPE2_Msk (0x3ul << EPWM_CTL1_CNTTYPE2_Pos) /*!< EPWM_T::CTL1: CNTTYPE2 Mask */
#define EPWM_CTL1_CNTTYPE3_Pos (6) /*!< EPWM_T::CTL1: CNTTYPE3 Position */
#define EPWM_CTL1_CNTTYPE3_Msk (0x3ul << EPWM_CTL1_CNTTYPE3_Pos) /*!< EPWM_T::CTL1: CNTTYPE3 Mask */
#define EPWM_CTL1_CNTTYPE4_Pos (8) /*!< EPWM_T::CTL1: CNTTYPE4 Position */
#define EPWM_CTL1_CNTTYPE4_Msk (0x3ul << EPWM_CTL1_CNTTYPE4_Pos) /*!< EPWM_T::CTL1: CNTTYPE4 Mask */
#define EPWM_CTL1_CNTTYPE5_Pos (10) /*!< EPWM_T::CTL1: CNTTYPE5 Position */
#define EPWM_CTL1_CNTTYPE5_Msk (0x3ul << EPWM_CTL1_CNTTYPE5_Pos) /*!< EPWM_T::CTL1: CNTTYPE5 Mask */
#define EPWM_CTL1_CNTMODE0_Pos (16) /*!< EPWM_T::CTL1: CNTMODE0 Position */
#define EPWM_CTL1_CNTMODE0_Msk (0x1ul << EPWM_CTL1_CNTMODE0_Pos) /*!< EPWM_T::CTL1: CNTMODE0 Mask */
#define EPWM_CTL1_CNTMODE1_Pos (17) /*!< EPWM_T::CTL1: CNTMODE1 Position */
#define EPWM_CTL1_CNTMODE1_Msk (0x1ul << EPWM_CTL1_CNTMODE1_Pos) /*!< EPWM_T::CTL1: CNTMODE1 Mask */
#define EPWM_CTL1_CNTMODE2_Pos (18) /*!< EPWM_T::CTL1: CNTMODE2 Position */
#define EPWM_CTL1_CNTMODE2_Msk (0x1ul << EPWM_CTL1_CNTMODE2_Pos) /*!< EPWM_T::CTL1: CNTMODE2 Mask */
#define EPWM_CTL1_CNTMODE3_Pos (19) /*!< EPWM_T::CTL1: CNTMODE3 Position */
#define EPWM_CTL1_CNTMODE3_Msk (0x1ul << EPWM_CTL1_CNTMODE3_Pos) /*!< EPWM_T::CTL1: CNTMODE3 Mask */
#define EPWM_CTL1_CNTMODE4_Pos (20) /*!< EPWM_T::CTL1: CNTMODE4 Position */
#define EPWM_CTL1_CNTMODE4_Msk (0x1ul << EPWM_CTL1_CNTMODE4_Pos) /*!< EPWM_T::CTL1: CNTMODE4 Mask */
#define EPWM_CTL1_CNTMODE5_Pos (21) /*!< EPWM_T::CTL1: CNTMODE5 Position */
#define EPWM_CTL1_CNTMODE5_Msk (0x1ul << EPWM_CTL1_CNTMODE5_Pos) /*!< EPWM_T::CTL1: CNTMODE5 Mask */
#define EPWM_CTL1_OUTMODE0_Pos (24) /*!< EPWM_T::CTL1: OUTMODE0 Position */
#define EPWM_CTL1_OUTMODE0_Msk (0x1ul << EPWM_CTL1_OUTMODE0_Pos) /*!< EPWM_T::CTL1: OUTMODE0 Mask */
#define EPWM_CTL1_OUTMODE2_Pos (25) /*!< EPWM_T::CTL1: OUTMODE2 Position */
#define EPWM_CTL1_OUTMODE2_Msk (0x1ul << EPWM_CTL1_OUTMODE2_Pos) /*!< EPWM_T::CTL1: OUTMODE2 Mask */
#define EPWM_CTL1_OUTMODE4_Pos (26) /*!< EPWM_T::CTL1: OUTMODE4 Position */
#define EPWM_CTL1_OUTMODE4_Msk (0x1ul << EPWM_CTL1_OUTMODE4_Pos) /*!< EPWM_T::CTL1: OUTMODE4 Mask */
#define EPWM_SYNC_PHSEN0_Pos (0) /*!< EPWM_T::SYNC: PHSEN0 Position */
#define EPWM_SYNC_PHSEN0_Msk (0x1ul << EPWM_SYNC_PHSEN0_Pos) /*!< EPWM_T::SYNC: PHSEN0 Mask */
#define EPWM_SYNC_PHSEN2_Pos (1) /*!< EPWM_T::SYNC: PHSEN2 Position */
#define EPWM_SYNC_PHSEN2_Msk (0x1ul << EPWM_SYNC_PHSEN2_Pos) /*!< EPWM_T::SYNC: PHSEN2 Mask */
#define EPWM_SYNC_PHSEN4_Pos (2) /*!< EPWM_T::SYNC: PHSEN4 Position */
#define EPWM_SYNC_PHSEN4_Msk (0x1ul << EPWM_SYNC_PHSEN4_Pos) /*!< EPWM_T::SYNC: PHSEN4 Mask */
#define EPWM_SYNC_SINSRC0_Pos (8) /*!< EPWM_T::SYNC: SINSRC0 Position */
#define EPWM_SYNC_SINSRC0_Msk (0x3ul << EPWM_SYNC_SINSRC0_Pos) /*!< EPWM_T::SYNC: SINSRC0 Mask */
#define EPWM_SYNC_SINSRC2_Pos (10) /*!< EPWM_T::SYNC: SINSRC2 Position */
#define EPWM_SYNC_SINSRC2_Msk (0x3ul << EPWM_SYNC_SINSRC2_Pos) /*!< EPWM_T::SYNC: SINSRC2 Mask */
#define EPWM_SYNC_SINSRC4_Pos (12) /*!< EPWM_T::SYNC: SINSRC4 Position */
#define EPWM_SYNC_SINSRC4_Msk (0x3ul << EPWM_SYNC_SINSRC4_Pos) /*!< EPWM_T::SYNC: SINSRC4 Mask */
#define EPWM_SYNC_SNFLTEN_Pos (16) /*!< EPWM_T::SYNC: SNFLTEN Position */
#define EPWM_SYNC_SNFLTEN_Msk (0x1ul << EPWM_SYNC_SNFLTEN_Pos) /*!< EPWM_T::SYNC: SNFLTEN Mask */
#define EPWM_SYNC_SFLTCSEL_Pos (17) /*!< EPWM_T::SYNC: SFLTCSEL Position */
#define EPWM_SYNC_SFLTCSEL_Msk (0x7ul << EPWM_SYNC_SFLTCSEL_Pos) /*!< EPWM_T::SYNC: SFLTCSEL Mask */
#define EPWM_SYNC_SFLTCNT_Pos (20) /*!< EPWM_T::SYNC: SFLTCNT Position */
#define EPWM_SYNC_SFLTCNT_Msk (0x7ul << EPWM_SYNC_SFLTCNT_Pos) /*!< EPWM_T::SYNC: SFLTCNT Mask */
#define EPWM_SYNC_SINPINV_Pos (23) /*!< EPWM_T::SYNC: SINPINV Position */
#define EPWM_SYNC_SINPINV_Msk (0x1ul << EPWM_SYNC_SINPINV_Pos) /*!< EPWM_T::SYNC: SINPINV Mask */
#define EPWM_SYNC_PHSDIR0_Pos (24) /*!< EPWM_T::SYNC: PHSDIR0 Position */
#define EPWM_SYNC_PHSDIR0_Msk (0x1ul << EPWM_SYNC_PHSDIR0_Pos) /*!< EPWM_T::SYNC: PHSDIR0 Mask */
#define EPWM_SYNC_PHSDIR2_Pos (25) /*!< EPWM_T::SYNC: PHSDIR2 Position */
#define EPWM_SYNC_PHSDIR2_Msk (0x1ul << EPWM_SYNC_PHSDIR2_Pos) /*!< EPWM_T::SYNC: PHSDIR2 Mask */
#define EPWM_SYNC_PHSDIR4_Pos (26) /*!< EPWM_T::SYNC: PHSDIR4 Position */
#define EPWM_SYNC_PHSDIR4_Msk (0x1ul << EPWM_SYNC_PHSDIR4_Pos) /*!< EPWM_T::SYNC: PHSDIR4 Mask */
#define EPWM_SWSYNC_SWSYNC0_Pos (0) /*!< EPWM_T::SWSYNC: SWSYNC0 Position */
#define EPWM_SWSYNC_SWSYNC0_Msk (0x1ul << EPWM_SWSYNC_SWSYNC0_Pos) /*!< EPWM_T::SWSYNC: SWSYNC0 Mask */
#define EPWM_SWSYNC_SWSYNC2_Pos (1) /*!< EPWM_T::SWSYNC: SWSYNC2 Position */
#define EPWM_SWSYNC_SWSYNC2_Msk (0x1ul << EPWM_SWSYNC_SWSYNC2_Pos) /*!< EPWM_T::SWSYNC: SWSYNC2 Mask */
#define EPWM_SWSYNC_SWSYNC4_Pos (2) /*!< EPWM_T::SWSYNC: SWSYNC4 Position */
#define EPWM_SWSYNC_SWSYNC4_Msk (0x1ul << EPWM_SWSYNC_SWSYNC4_Pos) /*!< EPWM_T::SWSYNC: SWSYNC4 Mask */
#define EPWM_CLKSRC_ECLKSRC0_Pos (0) /*!< EPWM_T::CLKSRC: ECLKSRC0 Position */
#define EPWM_CLKSRC_ECLKSRC0_Msk (0x7ul << EPWM_CLKSRC_ECLKSRC0_Pos) /*!< EPWM_T::CLKSRC: ECLKSRC0 Mask */
#define EPWM_CLKSRC_ECLKSRC2_Pos (8) /*!< EPWM_T::CLKSRC: ECLKSRC2 Position */
#define EPWM_CLKSRC_ECLKSRC2_Msk (0x7ul << EPWM_CLKSRC_ECLKSRC2_Pos) /*!< EPWM_T::CLKSRC: ECLKSRC2 Mask */
#define EPWM_CLKSRC_ECLKSRC4_Pos (16) /*!< EPWM_T::CLKSRC: ECLKSRC4 Position */
#define EPWM_CLKSRC_ECLKSRC4_Msk (0x7ul << EPWM_CLKSRC_ECLKSRC4_Pos) /*!< EPWM_T::CLKSRC: ECLKSRC4 Mask */
#define EPWM_CNTEN_CNTEN0_Pos (0) /*!< EPWM_T::CNTEN: CNTEN0 Position */
#define EPWM_CNTEN_CNTEN0_Msk (0x1ul << EPWM_CNTEN_CNTEN0_Pos) /*!< EPWM_T::CNTEN: CNTEN0 Mask */
#define EPWM_CNTEN_CNTEN1_Pos (1) /*!< EPWM_T::CNTEN: CNTEN1 Position */
#define EPWM_CNTEN_CNTEN1_Msk (0x1ul << EPWM_CNTEN_CNTEN1_Pos) /*!< EPWM_T::CNTEN: CNTEN1 Mask */
#define EPWM_CNTEN_CNTEN2_Pos (2) /*!< EPWM_T::CNTEN: CNTEN2 Position */
#define EPWM_CNTEN_CNTEN2_Msk (0x1ul << EPWM_CNTEN_CNTEN2_Pos) /*!< EPWM_T::CNTEN: CNTEN2 Mask */
#define EPWM_CNTEN_CNTEN3_Pos (3) /*!< EPWM_T::CNTEN: CNTEN3 Position */
#define EPWM_CNTEN_CNTEN3_Msk (0x1ul << EPWM_CNTEN_CNTEN3_Pos) /*!< EPWM_T::CNTEN: CNTEN3 Mask */
#define EPWM_CNTEN_CNTEN4_Pos (4) /*!< EPWM_T::CNTEN: CNTEN4 Position */
#define EPWM_CNTEN_CNTEN4_Msk (0x1ul << EPWM_CNTEN_CNTEN4_Pos) /*!< EPWM_T::CNTEN: CNTEN4 Mask */
#define EPWM_CNTEN_CNTEN5_Pos (5) /*!< EPWM_T::CNTEN: CNTEN5 Position */
#define EPWM_CNTEN_CNTEN5_Msk (0x1ul << EPWM_CNTEN_CNTEN5_Pos) /*!< EPWM_T::CNTEN: CNTEN5 Mask */
#define EPWM_CNTCLR_CNTCLR0_Pos (0) /*!< EPWM_T::CNTCLR: CNTCLR0 Position */
#define EPWM_CNTCLR_CNTCLR0_Msk (0x1ul << EPWM_CNTCLR_CNTCLR0_Pos) /*!< EPWM_T::CNTCLR: CNTCLR0 Mask */
#define EPWM_CNTCLR_CNTCLR1_Pos (1) /*!< EPWM_T::CNTCLR: CNTCLR1 Position */
#define EPWM_CNTCLR_CNTCLR1_Msk (0x1ul << EPWM_CNTCLR_CNTCLR1_Pos) /*!< EPWM_T::CNTCLR: CNTCLR1 Mask */
#define EPWM_CNTCLR_CNTCLR2_Pos (2) /*!< EPWM_T::CNTCLR: CNTCLR2 Position */
#define EPWM_CNTCLR_CNTCLR2_Msk (0x1ul << EPWM_CNTCLR_CNTCLR2_Pos) /*!< EPWM_T::CNTCLR: CNTCLR2 Mask */
#define EPWM_CNTCLR_CNTCLR3_Pos (3) /*!< EPWM_T::CNTCLR: CNTCLR3 Position */
#define EPWM_CNTCLR_CNTCLR3_Msk (0x1ul << EPWM_CNTCLR_CNTCLR3_Pos) /*!< EPWM_T::CNTCLR: CNTCLR3 Mask */
#define EPWM_CNTCLR_CNTCLR4_Pos (4) /*!< EPWM_T::CNTCLR: CNTCLR4 Position */
#define EPWM_CNTCLR_CNTCLR4_Msk (0x1ul << EPWM_CNTCLR_CNTCLR4_Pos) /*!< EPWM_T::CNTCLR: CNTCLR4 Mask */
#define EPWM_CNTCLR_CNTCLR5_Pos (5) /*!< EPWM_T::CNTCLR: CNTCLR5 Position */
#define EPWM_CNTCLR_CNTCLR5_Msk (0x1ul << EPWM_CNTCLR_CNTCLR5_Pos) /*!< EPWM_T::CNTCLR: CNTCLR5 Mask */
#define EPWM_LOAD_LOAD0_Pos (0) /*!< EPWM_T::LOAD: LOAD0 Position */
#define EPWM_LOAD_LOAD0_Msk (0x1ul << EPWM_LOAD_LOAD0_Pos) /*!< EPWM_T::LOAD: LOAD0 Mask */
#define EPWM_LOAD_LOAD1_Pos (1) /*!< EPWM_T::LOAD: LOAD1 Position */
#define EPWM_LOAD_LOAD1_Msk (0x1ul << EPWM_LOAD_LOAD1_Pos) /*!< EPWM_T::LOAD: LOAD1 Mask */
#define EPWM_LOAD_LOAD2_Pos (2) /*!< EPWM_T::LOAD: LOAD2 Position */
#define EPWM_LOAD_LOAD2_Msk (0x1ul << EPWM_LOAD_LOAD2_Pos) /*!< EPWM_T::LOAD: LOAD2 Mask */
#define EPWM_LOAD_LOAD3_Pos (3) /*!< EPWM_T::LOAD: LOAD3 Position */
#define EPWM_LOAD_LOAD3_Msk (0x1ul << EPWM_LOAD_LOAD3_Pos) /*!< EPWM_T::LOAD: LOAD3 Mask */
#define EPWM_LOAD_LOAD4_Pos (4) /*!< EPWM_T::LOAD: LOAD4 Position */
#define EPWM_LOAD_LOAD4_Msk (0x1ul << EPWM_LOAD_LOAD4_Pos) /*!< EPWM_T::LOAD: LOAD4 Mask */
#define EPWM_LOAD_LOAD5_Pos (5) /*!< EPWM_T::LOAD: LOAD5 Position */
#define EPWM_LOAD_LOAD5_Msk (0x1ul << EPWM_LOAD_LOAD5_Pos) /*!< EPWM_T::LOAD: LOAD5 Mask */
#define EPWM_PERIOD0_PERIOD_Pos (0) /*!< EPWM_T::PERIOD0: PERIOD Position */
#define EPWM_PERIOD0_PERIOD_Msk (0xfffful << EPWM_PERIOD0_PERIOD_Pos) /*!< EPWM_T::PERIOD0: PERIOD Mask */
#define EPWM_PERIOD1_PERIOD_Pos (0) /*!< EPWM_T::PERIOD1: PERIOD Position */
#define EPWM_PERIOD1_PERIOD_Msk (0xfffful << EPWM_PERIOD1_PERIOD_Pos) /*!< EPWM_T::PERIOD1: PERIOD Mask */
#define EPWM_PERIOD2_PERIOD_Pos (0) /*!< EPWM_T::PERIOD2: PERIOD Position */
#define EPWM_PERIOD2_PERIOD_Msk (0xfffful << EPWM_PERIOD2_PERIOD_Pos) /*!< EPWM_T::PERIOD2: PERIOD Mask */
#define EPWM_PERIOD3_PERIOD_Pos (0) /*!< EPWM_T::PERIOD3: PERIOD Position */
#define EPWM_PERIOD3_PERIOD_Msk (0xfffful << EPWM_PERIOD3_PERIOD_Pos) /*!< EPWM_T::PERIOD3: PERIOD Mask */
#define EPWM_PERIOD4_PERIOD_Pos (0) /*!< EPWM_T::PERIOD4: PERIOD Position */
#define EPWM_PERIOD4_PERIOD_Msk (0xfffful << EPWM_PERIOD4_PERIOD_Pos) /*!< EPWM_T::PERIOD4: PERIOD Mask */
#define EPWM_PERIOD5_PERIOD_Pos (0) /*!< EPWM_T::PERIOD5: PERIOD Position */
#define EPWM_PERIOD5_PERIOD_Msk (0xfffful << EPWM_PERIOD5_PERIOD_Pos) /*!< EPWM_T::PERIOD5: PERIOD Mask */
#define EPWM_CMPDAT0_CMP_Pos (0) /*!< EPWM_T::CMPDAT0: CMP Position */
#define EPWM_CMPDAT0_CMP_Msk (0xfffful << EPWM_CMPDAT0_CMP_Pos) /*!< EPWM_T::CMPDAT0: CMP Mask */
#define EPWM_CMPDAT1_CMP_Pos (0) /*!< EPWM_T::CMPDAT1: CMP Position */
#define EPWM_CMPDAT1_CMP_Msk (0xfffful << EPWM_CMPDAT1_CMP_Pos) /*!< EPWM_T::CMPDAT1: CMP Mask */
#define EPWM_CMPDAT2_CMP_Pos (0) /*!< EPWM_T::CMPDAT2: CMP Position */
#define EPWM_CMPDAT2_CMP_Msk (0xfffful << EPWM_CMPDAT2_CMP_Pos) /*!< EPWM_T::CMPDAT2: CMP Mask */
#define EPWM_CMPDAT3_CMP_Pos (0) /*!< EPWM_T::CMPDAT3: CMP Position */
#define EPWM_CMPDAT3_CMP_Msk (0xfffful << EPWM_CMPDAT3_CMP_Pos) /*!< EPWM_T::CMPDAT3: CMP Mask */
#define EPWM_CMPDAT4_CMP_Pos (0) /*!< EPWM_T::CMPDAT4: CMP Position */
#define EPWM_CMPDAT4_CMP_Msk (0xfffful << EPWM_CMPDAT4_CMP_Pos) /*!< EPWM_T::CMPDAT4: CMP Mask */
#define EPWM_CMPDAT5_CMP_Pos (0) /*!< EPWM_T::CMPDAT5: CMP Position */
#define EPWM_CMPDAT5_CMP_Msk (0xfffful << EPWM_CMPDAT5_CMP_Pos) /*!< EPWM_T::CMPDAT5: CMP Mask */
#define EPWM_PHS0_1_PHS_Pos (0) /*!< EPWM_T::PHS0_1: PHS Position */
#define EPWM_PHS0_1_PHS_Msk (0xfffful << EPWM_PHS0_1_PHS_Pos) /*!< EPWM_T::PHS0_1: PHS Mask */
#define EPWM_PHS2_3_PHS_Pos (0) /*!< EPWM_T::PHS2_3: PHS Position */
#define EPWM_PHS2_3_PHS_Msk (0xfffful << EPWM_PHS2_3_PHS_Pos) /*!< EPWM_T::PHS2_3: PHS Mask */
#define EPWM_PHS4_5_PHS_Pos (0) /*!< EPWM_T::PHS4_5: PHS Position */
#define EPWM_PHS4_5_PHS_Msk (0xfffful << EPWM_PHS4_5_PHS_Pos) /*!< EPWM_T::PHS4_5: PHS Mask */
#define EPWM_CNT0_CNT_Pos (0) /*!< EPWM_T::CNT0: CNT Position */
#define EPWM_CNT0_CNT_Msk (0xfffful << EPWM_CNT0_CNT_Pos) /*!< EPWM_T::CNT0: CNT Mask */
#define EPWM_CNT0_DIRF_Pos (16) /*!< EPWM_T::CNT0: DIRF Position */
#define EPWM_CNT0_DIRF_Msk (0x1ul << EPWM_CNT0_DIRF_Pos) /*!< EPWM_T::CNT0: DIRF Mask */
#define EPWM_CNT1_CNT_Pos (0) /*!< EPWM_T::CNT1: CNT Position */
#define EPWM_CNT1_CNT_Msk (0xfffful << EPWM_CNT1_CNT_Pos) /*!< EPWM_T::CNT1: CNT Mask */
#define EPWM_CNT1_DIRF_Pos (16) /*!< EPWM_T::CNT1: DIRF Position */
#define EPWM_CNT1_DIRF_Msk (0x1ul << EPWM_CNT1_DIRF_Pos) /*!< EPWM_T::CNT1: DIRF Mask */
#define EPWM_CNT2_CNT_Pos (0) /*!< EPWM_T::CNT2: CNT Position */
#define EPWM_CNT2_CNT_Msk (0xfffful << EPWM_CNT2_CNT_Pos) /*!< EPWM_T::CNT2: CNT Mask */
#define EPWM_CNT2_DIRF_Pos (16) /*!< EPWM_T::CNT2: DIRF Position */
#define EPWM_CNT2_DIRF_Msk (0x1ul << EPWM_CNT2_DIRF_Pos) /*!< EPWM_T::CNT2: DIRF Mask */
#define EPWM_CNT3_CNT_Pos (0) /*!< EPWM_T::CNT3: CNT Position */
#define EPWM_CNT3_CNT_Msk (0xfffful << EPWM_CNT3_CNT_Pos) /*!< EPWM_T::CNT3: CNT Mask */
#define EPWM_CNT3_DIRF_Pos (16) /*!< EPWM_T::CNT3: DIRF Position */
#define EPWM_CNT3_DIRF_Msk (0x1ul << EPWM_CNT3_DIRF_Pos) /*!< EPWM_T::CNT3: DIRF Mask */
#define EPWM_CNT4_CNT_Pos (0) /*!< EPWM_T::CNT4: CNT Position */
#define EPWM_CNT4_CNT_Msk (0xfffful << EPWM_CNT4_CNT_Pos) /*!< EPWM_T::CNT4: CNT Mask */
#define EPWM_CNT4_DIRF_Pos (16) /*!< EPWM_T::CNT4: DIRF Position */
#define EPWM_CNT4_DIRF_Msk (0x1ul << EPWM_CNT4_DIRF_Pos) /*!< EPWM_T::CNT4: DIRF Mask */
#define EPWM_CNT5_CNT_Pos (0) /*!< EPWM_T::CNT5: CNT Position */
#define EPWM_CNT5_CNT_Msk (0xfffful << EPWM_CNT5_CNT_Pos) /*!< EPWM_T::CNT5: CNT Mask */
#define EPWM_CNT5_DIRF_Pos (16) /*!< EPWM_T::CNT5: DIRF Position */
#define EPWM_CNT5_DIRF_Msk (0x1ul << EPWM_CNT5_DIRF_Pos) /*!< EPWM_T::CNT5: DIRF Mask */
#define EPWM_WGCTL0_ZPCTL0_Pos (0) /*!< EPWM_T::WGCTL0: ZPCTL0 Position */
#define EPWM_WGCTL0_ZPCTL0_Msk (0x3ul << EPWM_WGCTL0_ZPCTL0_Pos) /*!< EPWM_T::WGCTL0: ZPCTL0 Mask */
#define EPWM_WGCTL0_ZPCTL1_Pos (2) /*!< EPWM_T::WGCTL0: ZPCTL1 Position */
#define EPWM_WGCTL0_ZPCTL1_Msk (0x3ul << EPWM_WGCTL0_ZPCTL1_Pos) /*!< EPWM_T::WGCTL0: ZPCTL1 Mask */
#define EPWM_WGCTL0_ZPCTL2_Pos (4) /*!< EPWM_T::WGCTL0: ZPCTL2 Position */
#define EPWM_WGCTL0_ZPCTL2_Msk (0x3ul << EPWM_WGCTL0_ZPCTL2_Pos) /*!< EPWM_T::WGCTL0: ZPCTL2 Mask */
#define EPWM_WGCTL0_ZPCTL3_Pos (6) /*!< EPWM_T::WGCTL0: ZPCTL3 Position */
#define EPWM_WGCTL0_ZPCTL3_Msk (0x3ul << EPWM_WGCTL0_ZPCTL3_Pos) /*!< EPWM_T::WGCTL0: ZPCTL3 Mask */
#define EPWM_WGCTL0_ZPCTL4_Pos (8) /*!< EPWM_T::WGCTL0: ZPCTL4 Position */
#define EPWM_WGCTL0_ZPCTL4_Msk (0x3ul << EPWM_WGCTL0_ZPCTL4_Pos) /*!< EPWM_T::WGCTL0: ZPCTL4 Mask */
#define EPWM_WGCTL0_ZPCTL5_Pos (10) /*!< EPWM_T::WGCTL0: ZPCTL5 Position */
#define EPWM_WGCTL0_ZPCTL5_Msk (0x3ul << EPWM_WGCTL0_ZPCTL5_Pos) /*!< EPWM_T::WGCTL0: ZPCTL5 Mask */
#define EPWM_WGCTL0_PRDPCTL0_Pos (16) /*!< EPWM_T::WGCTL0: PRDPCTL0 Position */
#define EPWM_WGCTL0_PRDPCTL0_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL0_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL0 Mask */
#define EPWM_WGCTL0_PRDPCTL1_Pos (18) /*!< EPWM_T::WGCTL0: PRDPCTL1 Position */
#define EPWM_WGCTL0_PRDPCTL1_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL1_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL1 Mask */
#define EPWM_WGCTL0_PRDPCTL2_Pos (20) /*!< EPWM_T::WGCTL0: PRDPCTL2 Position */
#define EPWM_WGCTL0_PRDPCTL2_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL2_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL2 Mask */
#define EPWM_WGCTL0_PRDPCTL3_Pos (22) /*!< EPWM_T::WGCTL0: PRDPCTL3 Position */
#define EPWM_WGCTL0_PRDPCTL3_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL3_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL3 Mask */
#define EPWM_WGCTL0_PRDPCTL4_Pos (24) /*!< EPWM_T::WGCTL0: PRDPCTL4 Position */
#define EPWM_WGCTL0_PRDPCTL4_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL4_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL4 Mask */
#define EPWM_WGCTL0_PRDPCTL5_Pos (26) /*!< EPWM_T::WGCTL0: PRDPCTL5 Position */
#define EPWM_WGCTL0_PRDPCTL5_Msk (0x3ul << EPWM_WGCTL0_PRDPCTL5_Pos) /*!< EPWM_T::WGCTL0: PRDPCTL5 Mask */
#define EPWM_WGCTL1_CMPUCTL0_Pos (0) /*!< EPWM_T::WGCTL1: CMPUCTL0 Position */
#define EPWM_WGCTL1_CMPUCTL0_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL0_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL0 Mask */
#define EPWM_WGCTL1_CMPUCTL1_Pos (2) /*!< EPWM_T::WGCTL1: CMPUCTL1 Position */
#define EPWM_WGCTL1_CMPUCTL1_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL1_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL1 Mask */
#define EPWM_WGCTL1_CMPUCTL2_Pos (4) /*!< EPWM_T::WGCTL1: CMPUCTL2 Position */
#define EPWM_WGCTL1_CMPUCTL2_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL2_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL2 Mask */
#define EPWM_WGCTL1_CMPUCTL3_Pos (6) /*!< EPWM_T::WGCTL1: CMPUCTL3 Position */
#define EPWM_WGCTL1_CMPUCTL3_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL3_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL3 Mask */
#define EPWM_WGCTL1_CMPUCTL4_Pos (8) /*!< EPWM_T::WGCTL1: CMPUCTL4 Position */
#define EPWM_WGCTL1_CMPUCTL4_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL4_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL4 Mask */
#define EPWM_WGCTL1_CMPUCTL5_Pos (10) /*!< EPWM_T::WGCTL1: CMPUCTL5 Position */
#define EPWM_WGCTL1_CMPUCTL5_Msk (0x3ul << EPWM_WGCTL1_CMPUCTL5_Pos) /*!< EPWM_T::WGCTL1: CMPUCTL5 Mask */
#define EPWM_WGCTL1_CMPDCTL0_Pos (16) /*!< EPWM_T::WGCTL1: CMPDCTL0 Position */
#define EPWM_WGCTL1_CMPDCTL0_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL0_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL0 Mask */
#define EPWM_WGCTL1_CMPDCTL1_Pos (18) /*!< EPWM_T::WGCTL1: CMPDCTL1 Position */
#define EPWM_WGCTL1_CMPDCTL1_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL1_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL1 Mask */
#define EPWM_WGCTL1_CMPDCTL2_Pos (20) /*!< EPWM_T::WGCTL1: CMPDCTL2 Position */
#define EPWM_WGCTL1_CMPDCTL2_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL2_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL2 Mask */
#define EPWM_WGCTL1_CMPDCTL3_Pos (22) /*!< EPWM_T::WGCTL1: CMPDCTL3 Position */
#define EPWM_WGCTL1_CMPDCTL3_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL3_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL3 Mask */
#define EPWM_WGCTL1_CMPDCTL4_Pos (24) /*!< EPWM_T::WGCTL1: CMPDCTL4 Position */
#define EPWM_WGCTL1_CMPDCTL4_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL4_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL4 Mask */
#define EPWM_WGCTL1_CMPDCTL5_Pos (26) /*!< EPWM_T::WGCTL1: CMPDCTL5 Position */
#define EPWM_WGCTL1_CMPDCTL5_Msk (0x3ul << EPWM_WGCTL1_CMPDCTL5_Pos) /*!< EPWM_T::WGCTL1: CMPDCTL5 Mask */
#define EPWM_MSKEN_MSKEN0_Pos (0) /*!< EPWM_T::MSKEN: MSKEN0 Position */
#define EPWM_MSKEN_MSKEN0_Msk (0x1ul << EPWM_MSKEN_MSKEN0_Pos) /*!< EPWM_T::MSKEN: MSKEN0 Mask */
#define EPWM_MSKEN_MSKEN1_Pos (1) /*!< EPWM_T::MSKEN: MSKEN1 Position */
#define EPWM_MSKEN_MSKEN1_Msk (0x1ul << EPWM_MSKEN_MSKEN1_Pos) /*!< EPWM_T::MSKEN: MSKEN1 Mask */
#define EPWM_MSKEN_MSKEN2_Pos (2) /*!< EPWM_T::MSKEN: MSKEN2 Position */
#define EPWM_MSKEN_MSKEN2_Msk (0x1ul << EPWM_MSKEN_MSKEN2_Pos) /*!< EPWM_T::MSKEN: MSKEN2 Mask */
#define EPWM_MSKEN_MSKEN3_Pos (3) /*!< EPWM_T::MSKEN: MSKEN3 Position */
#define EPWM_MSKEN_MSKEN3_Msk (0x1ul << EPWM_MSKEN_MSKEN3_Pos) /*!< EPWM_T::MSKEN: MSKEN3 Mask */
#define EPWM_MSKEN_MSKEN4_Pos (4) /*!< EPWM_T::MSKEN: MSKEN4 Position */
#define EPWM_MSKEN_MSKEN4_Msk (0x1ul << EPWM_MSKEN_MSKEN4_Pos) /*!< EPWM_T::MSKEN: MSKEN4 Mask */
#define EPWM_MSKEN_MSKEN5_Pos (5) /*!< EPWM_T::MSKEN: MSKEN5 Position */
#define EPWM_MSKEN_MSKEN5_Msk (0x1ul << EPWM_MSKEN_MSKEN5_Pos) /*!< EPWM_T::MSKEN: MSKEN5 Mask */
#define EPWM_MSK_MSKDAT0_Pos (0) /*!< EPWM_T::MSK: MSKDAT0 Position */
#define EPWM_MSK_MSKDAT0_Msk (0x1ul << EPWM_MSK_MSKDAT0_Pos) /*!< EPWM_T::MSK: MSKDAT0 Mask */
#define EPWM_MSK_MSKDAT1_Pos (1) /*!< EPWM_T::MSK: MSKDAT1 Position */
#define EPWM_MSK_MSKDAT1_Msk (0x1ul << EPWM_MSK_MSKDAT1_Pos) /*!< EPWM_T::MSK: MSKDAT1 Mask */
#define EPWM_MSK_MSKDAT2_Pos (2) /*!< EPWM_T::MSK: MSKDAT2 Position */
#define EPWM_MSK_MSKDAT2_Msk (0x1ul << EPWM_MSK_MSKDAT2_Pos) /*!< EPWM_T::MSK: MSKDAT2 Mask */
#define EPWM_MSK_MSKDAT3_Pos (3) /*!< EPWM_T::MSK: MSKDAT3 Position */
#define EPWM_MSK_MSKDAT3_Msk (0x1ul << EPWM_MSK_MSKDAT3_Pos) /*!< EPWM_T::MSK: MSKDAT3 Mask */
#define EPWM_MSK_MSKDAT4_Pos (4) /*!< EPWM_T::MSK: MSKDAT4 Position */
#define EPWM_MSK_MSKDAT4_Msk (0x1ul << EPWM_MSK_MSKDAT4_Pos) /*!< EPWM_T::MSK: MSKDAT4 Mask */
#define EPWM_MSK_MSKDAT5_Pos (5) /*!< EPWM_T::MSK: MSKDAT5 Position */
#define EPWM_MSK_MSKDAT5_Msk (0x1ul << EPWM_MSK_MSKDAT5_Pos) /*!< EPWM_T::MSK: MSKDAT5 Mask */
#define EPWM_BNF_BRK0NFEN_Pos (0) /*!< EPWM_T::BNF: BRK0NFEN Position */
#define EPWM_BNF_BRK0NFEN_Msk (0x1ul << EPWM_BNF_BRK0NFEN_Pos) /*!< EPWM_T::BNF: BRK0NFEN Mask */
#define EPWM_BNF_BRK0NFSEL_Pos (1) /*!< EPWM_T::BNF: BRK0NFSEL Position */
#define EPWM_BNF_BRK0NFSEL_Msk (0x7ul << EPWM_BNF_BRK0NFSEL_Pos) /*!< EPWM_T::BNF: BRK0NFSEL Mask */
#define EPWM_BNF_BRK0FCNT_Pos (4) /*!< EPWM_T::BNF: BRK0FCNT Position */
#define EPWM_BNF_BRK0FCNT_Msk (0x7ul << EPWM_BNF_BRK0FCNT_Pos) /*!< EPWM_T::BNF: BRK0FCNT Mask */
#define EPWM_BNF_BRK0PINV_Pos (7) /*!< EPWM_T::BNF: BRK0PINV Position */
#define EPWM_BNF_BRK0PINV_Msk (0x1ul << EPWM_BNF_BRK0PINV_Pos) /*!< EPWM_T::BNF: BRK0PINV Mask */
#define EPWM_BNF_BRK1NFEN_Pos (8) /*!< EPWM_T::BNF: BRK1NFEN Position */
#define EPWM_BNF_BRK1NFEN_Msk (0x1ul << EPWM_BNF_BRK1NFEN_Pos) /*!< EPWM_T::BNF: BRK1NFEN Mask */
#define EPWM_BNF_BRK1NFSEL_Pos (9) /*!< EPWM_T::BNF: BRK1NFSEL Position */
#define EPWM_BNF_BRK1NFSEL_Msk (0x7ul << EPWM_BNF_BRK1NFSEL_Pos) /*!< EPWM_T::BNF: BRK1NFSEL Mask */
#define EPWM_BNF_BRK1FCNT_Pos (12) /*!< EPWM_T::BNF: BRK1FCNT Position */
#define EPWM_BNF_BRK1FCNT_Msk (0x7ul << EPWM_BNF_BRK1FCNT_Pos) /*!< EPWM_T::BNF: BRK1FCNT Mask */
#define EPWM_BNF_BRK1PINV_Pos (15) /*!< EPWM_T::BNF: BRK1PINV Position */
#define EPWM_BNF_BRK1PINV_Msk (0x1ul << EPWM_BNF_BRK1PINV_Pos) /*!< EPWM_T::BNF: BRK1PINV Mask */
#define EPWM_BNF_BK0SRC_Pos (16) /*!< EPWM_T::BNF: BK0SRC Position */
#define EPWM_BNF_BK0SRC_Msk (0x1ul << EPWM_BNF_BK0SRC_Pos) /*!< EPWM_T::BNF: BK0SRC Mask */
#define EPWM_BNF_BK1SRC_Pos (24) /*!< EPWM_T::BNF: BK1SRC Position */
#define EPWM_BNF_BK1SRC_Msk (0x1ul << EPWM_BNF_BK1SRC_Pos) /*!< EPWM_T::BNF: BK1SRC Mask */
#define EPWM_FAILBRK_CSSBRKEN_Pos (0) /*!< EPWM_T::FAILBRK: CSSBRKEN Position */
#define EPWM_FAILBRK_CSSBRKEN_Msk (0x1ul << EPWM_FAILBRK_CSSBRKEN_Pos) /*!< EPWM_T::FAILBRK: CSSBRKEN Mask */
#define EPWM_FAILBRK_BODBRKEN_Pos (1) /*!< EPWM_T::FAILBRK: BODBRKEN Position */
#define EPWM_FAILBRK_BODBRKEN_Msk (0x1ul << EPWM_FAILBRK_BODBRKEN_Pos) /*!< EPWM_T::FAILBRK: BODBRKEN Mask */
#define EPWM_FAILBRK_RAMBRKEN_Pos (2) /*!< EPWM_T::FAILBRK: RAMBRKEN Position */
#define EPWM_FAILBRK_RAMBRKEN_Msk (0x1ul << EPWM_FAILBRK_RAMBRKEN_Pos) /*!< EPWM_T::FAILBRK: RAMBRKEN Mask */
#define EPWM_FAILBRK_CORBRKEN_Pos (3) /*!< EPWM_T::FAILBRK: CORBRKEN Position */
#define EPWM_FAILBRK_CORBRKEN_Msk (0x1ul << EPWM_FAILBRK_CORBRKEN_Pos) /*!< EPWM_T::FAILBRK: CORBRKEN Mask */
#define EPWM_BRKCTL0_1_CPO0EBEN_Pos (0) /*!< EPWM_T::BRKCTL0_1: CPO0EBEN Position */
#define EPWM_BRKCTL0_1_CPO0EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO0EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO0EBEN Mask */
#define EPWM_BRKCTL0_1_CPO1EBEN_Pos (1) /*!< EPWM_T::BRKCTL0_1: CPO1EBEN Position */
#define EPWM_BRKCTL0_1_CPO1EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO1EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO1EBEN Mask */
#define EPWM_BRKCTL0_1_CPO2EBEN_Pos (2) /*!< EPWM_T::BRKCTL0_1: CPO2EBEN Position */
#define EPWM_BRKCTL0_1_CPO2EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO2EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO2EBEN Mask */
#define EPWM_BRKCTL0_1_CPO3EBEN_Pos (3) /*!< EPWM_T::BRKCTL0_1: CPO3EBEN Position */
#define EPWM_BRKCTL0_1_CPO3EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO3EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO3EBEN Mask */
#define EPWM_BRKCTL0_1_BRKP0EEN_Pos (4) /*!< EPWM_T::BRKCTL0_1: BRKP0EEN Position */
#define EPWM_BRKCTL0_1_BRKP0EEN_Msk (0x1ul << EPWM_BRKCTL0_1_BRKP0EEN_Pos) /*!< EPWM_T::BRKCTL0_1: BRKP0EEN Mask */
#define EPWM_BRKCTL0_1_BRKP1EEN_Pos (5) /*!< EPWM_T::BRKCTL0_1: BRKP1EEN Position */
#define EPWM_BRKCTL0_1_BRKP1EEN_Msk (0x1ul << EPWM_BRKCTL0_1_BRKP1EEN_Pos) /*!< EPWM_T::BRKCTL0_1: BRKP1EEN Mask */
#define EPWM_BRKCTL0_1_SYSEBEN_Pos (7) /*!< EPWM_T::BRKCTL0_1: SYSEBEN Position */
#define EPWM_BRKCTL0_1_SYSEBEN_Msk (0x1ul << EPWM_BRKCTL0_1_SYSEBEN_Pos) /*!< EPWM_T::BRKCTL0_1: SYSEBEN Mask */
#define EPWM_BRKCTL0_1_CPO0LBEN_Pos (8) /*!< EPWM_T::BRKCTL0_1: CPO0LBEN Position */
#define EPWM_BRKCTL0_1_CPO0LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO0LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO0LBEN Mask */
#define EPWM_BRKCTL0_1_CPO1LBEN_Pos (9) /*!< EPWM_T::BRKCTL0_1: CPO1LBEN Position */
#define EPWM_BRKCTL0_1_CPO1LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO1LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO1LBEN Mask */
#define EPWM_BRKCTL0_1_CPO2LBEN_Pos (10) /*!< EPWM_T::BRKCTL0_1: CPO2LBEN Position */
#define EPWM_BRKCTL0_1_CPO2LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO2LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO2LBEN Mask */
#define EPWM_BRKCTL0_1_CPO3LBEN_Pos (11) /*!< EPWM_T::BRKCTL0_1: CPO3LBEN Position */
#define EPWM_BRKCTL0_1_CPO3LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_CPO3LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: CPO3LBEN Mask */
#define EPWM_BRKCTL0_1_BRKP0LEN_Pos (12) /*!< EPWM_T::BRKCTL0_1: BRKP0LEN Position */
#define EPWM_BRKCTL0_1_BRKP0LEN_Msk (0x1ul << EPWM_BRKCTL0_1_BRKP0LEN_Pos) /*!< EPWM_T::BRKCTL0_1: BRKP0LEN Mask */
#define EPWM_BRKCTL0_1_BRKP1LEN_Pos (13) /*!< EPWM_T::BRKCTL0_1: BRKP1LEN Position */
#define EPWM_BRKCTL0_1_BRKP1LEN_Msk (0x1ul << EPWM_BRKCTL0_1_BRKP1LEN_Pos) /*!< EPWM_T::BRKCTL0_1: BRKP1LEN Mask */
#define EPWM_BRKCTL0_1_SYSLBEN_Pos (15) /*!< EPWM_T::BRKCTL0_1: SYSLBEN Position */
#define EPWM_BRKCTL0_1_SYSLBEN_Msk (0x1ul << EPWM_BRKCTL0_1_SYSLBEN_Pos) /*!< EPWM_T::BRKCTL0_1: SYSLBEN Mask */
#define EPWM_BRKCTL0_1_BRKAEVEN_Pos (16) /*!< EPWM_T::BRKCTL0_1: BRKAEVEN Position */
#define EPWM_BRKCTL0_1_BRKAEVEN_Msk (0x3ul << EPWM_BRKCTL0_1_BRKAEVEN_Pos) /*!< EPWM_T::BRKCTL0_1: BRKAEVEN Mask */
#define EPWM_BRKCTL0_1_BRKAODD_Pos (18) /*!< EPWM_T::BRKCTL0_1: BRKAODD Position */
#define EPWM_BRKCTL0_1_BRKAODD_Msk (0x3ul << EPWM_BRKCTL0_1_BRKAODD_Pos) /*!< EPWM_T::BRKCTL0_1: BRKAODD Mask */
#define EPWM_BRKCTL0_1_EADC0EBEN_Pos (20) /*!< EPWM_T::BRKCTL0_1: EADC0EBEN Position */
#define EPWM_BRKCTL0_1_EADC0EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC0EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC0EBEN Mask */
#define EPWM_BRKCTL0_1_EADC1EBEN_Pos (21) /*!< EPWM_T::BRKCTL0_1: EADC1EBEN Position */
#define EPWM_BRKCTL0_1_EADC1EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC1EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC1EBEN Mask */
#define EPWM_BRKCTL0_1_EADC2EBEN_Pos (22) /*!< EPWM_T::BRKCTL0_1: EADC2EBEN Position */
#define EPWM_BRKCTL0_1_EADC2EBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC2EBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC2EBEN Mask */
#define EPWM_BRKCTL0_1_EADC0LBEN_Pos (28) /*!< EPWM_T::BRKCTL0_1: EADC0LBEN Position */
#define EPWM_BRKCTL0_1_EADC0LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC0LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC0LBEN Mask */
#define EPWM_BRKCTL0_1_EADC1LBEN_Pos (29) /*!< EPWM_T::BRKCTL0_1: EADC1LBEN Position */
#define EPWM_BRKCTL0_1_EADC1LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC1LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC1LBEN Mask */
#define EPWM_BRKCTL0_1_EADC2LBEN_Pos (30) /*!< EPWM_T::BRKCTL0_1: EADC2LBEN Position */
#define EPWM_BRKCTL0_1_EADC2LBEN_Msk (0x1ul << EPWM_BRKCTL0_1_EADC2LBEN_Pos) /*!< EPWM_T::BRKCTL0_1: EADC2LBEN Mask */
#define EPWM_BRKCTL2_3_CPO0EBEN_Pos (0) /*!< EPWM_T::BRKCTL2_3: CPO0EBEN Position */
#define EPWM_BRKCTL2_3_CPO0EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO0EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO0EBEN Mask */
#define EPWM_BRKCTL2_3_CPO1EBEN_Pos (1) /*!< EPWM_T::BRKCTL2_3: CPO1EBEN Position */
#define EPWM_BRKCTL2_3_CPO1EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO1EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO1EBEN Mask */
#define EPWM_BRKCTL2_3_CPO2EBEN_Pos (2) /*!< EPWM_T::BRKCTL2_3: CPO2EBEN Position */
#define EPWM_BRKCTL2_3_CPO2EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO2EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO2EBEN Mask */
#define EPWM_BRKCTL2_3_CPO3EBEN_Pos (3) /*!< EPWM_T::BRKCTL2_3: CPO3EBEN Position */
#define EPWM_BRKCTL2_3_CPO3EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO3EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO3EBEN Mask */
#define EPWM_BRKCTL2_3_BRKP0EEN_Pos (4) /*!< EPWM_T::BRKCTL2_3: BRKP0EEN Position */
#define EPWM_BRKCTL2_3_BRKP0EEN_Msk (0x1ul << EPWM_BRKCTL2_3_BRKP0EEN_Pos) /*!< EPWM_T::BRKCTL2_3: BRKP0EEN Mask */
#define EPWM_BRKCTL2_3_BRKP1EEN_Pos (5) /*!< EPWM_T::BRKCTL2_3: BRKP1EEN Position */
#define EPWM_BRKCTL2_3_BRKP1EEN_Msk (0x1ul << EPWM_BRKCTL2_3_BRKP1EEN_Pos) /*!< EPWM_T::BRKCTL2_3: BRKP1EEN Mask */
#define EPWM_BRKCTL2_3_SYSEBEN_Pos (7) /*!< EPWM_T::BRKCTL2_3: SYSEBEN Position */
#define EPWM_BRKCTL2_3_SYSEBEN_Msk (0x1ul << EPWM_BRKCTL2_3_SYSEBEN_Pos) /*!< EPWM_T::BRKCTL2_3: SYSEBEN Mask */
#define EPWM_BRKCTL2_3_CPO0LBEN_Pos (8) /*!< EPWM_T::BRKCTL2_3: CPO0LBEN Position */
#define EPWM_BRKCTL2_3_CPO0LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO0LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO0LBEN Mask */
#define EPWM_BRKCTL2_3_CPO1LBEN_Pos (9) /*!< EPWM_T::BRKCTL2_3: CPO1LBEN Position */
#define EPWM_BRKCTL2_3_CPO1LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO1LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO1LBEN Mask */
#define EPWM_BRKCTL2_3_CPO2LBEN_Pos (10) /*!< EPWM_T::BRKCTL2_3: CPO2LBEN Position */
#define EPWM_BRKCTL2_3_CPO2LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO2LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO2LBEN Mask */
#define EPWM_BRKCTL2_3_CPO3LBEN_Pos (11) /*!< EPWM_T::BRKCTL2_3: CPO3LBEN Position */
#define EPWM_BRKCTL2_3_CPO3LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_CPO3LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: CPO3LBEN Mask */
#define EPWM_BRKCTL2_3_BRKP0LEN_Pos (12) /*!< EPWM_T::BRKCTL2_3: BRKP0LEN Position */
#define EPWM_BRKCTL2_3_BRKP0LEN_Msk (0x1ul << EPWM_BRKCTL2_3_BRKP0LEN_Pos) /*!< EPWM_T::BRKCTL2_3: BRKP0LEN Mask */
#define EPWM_BRKCTL2_3_BRKP1LEN_Pos (13) /*!< EPWM_T::BRKCTL2_3: BRKP1LEN Position */
#define EPWM_BRKCTL2_3_BRKP1LEN_Msk (0x1ul << EPWM_BRKCTL2_3_BRKP1LEN_Pos) /*!< EPWM_T::BRKCTL2_3: BRKP1LEN Mask */
#define EPWM_BRKCTL2_3_SYSLBEN_Pos (15) /*!< EPWM_T::BRKCTL2_3: SYSLBEN Position */
#define EPWM_BRKCTL2_3_SYSLBEN_Msk (0x1ul << EPWM_BRKCTL2_3_SYSLBEN_Pos) /*!< EPWM_T::BRKCTL2_3: SYSLBEN Mask */
#define EPWM_BRKCTL2_3_BRKAEVEN_Pos (16) /*!< EPWM_T::BRKCTL2_3: BRKAEVEN Position */
#define EPWM_BRKCTL2_3_BRKAEVEN_Msk (0x3ul << EPWM_BRKCTL2_3_BRKAEVEN_Pos) /*!< EPWM_T::BRKCTL2_3: BRKAEVEN Mask */
#define EPWM_BRKCTL2_3_BRKAODD_Pos (18) /*!< EPWM_T::BRKCTL2_3: BRKAODD Position */
#define EPWM_BRKCTL2_3_BRKAODD_Msk (0x3ul << EPWM_BRKCTL2_3_BRKAODD_Pos) /*!< EPWM_T::BRKCTL2_3: BRKAODD Mask */
#define EPWM_BRKCTL2_3_EADC0EBEN_Pos (20) /*!< EPWM_T::BRKCTL2_3: EADC0EBEN Position */
#define EPWM_BRKCTL2_3_EADC0EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC0EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC0EBEN Mask */
#define EPWM_BRKCTL2_3_EADC1EBEN_Pos (21) /*!< EPWM_T::BRKCTL2_3: EADC1EBEN Position */
#define EPWM_BRKCTL2_3_EADC1EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC1EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC1EBEN Mask */
#define EPWM_BRKCTL2_3_EADC2EBEN_Pos (22) /*!< EPWM_T::BRKCTL2_3: EADC2EBEN Position */
#define EPWM_BRKCTL2_3_EADC2EBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC2EBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC2EBEN Mask */
#define EPWM_BRKCTL2_3_EADC0LBEN_Pos (28) /*!< EPWM_T::BRKCTL2_3: EADC0LBEN Position */
#define EPWM_BRKCTL2_3_EADC0LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC0LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC0LBEN Mask */
#define EPWM_BRKCTL2_3_EADC1LBEN_Pos (29) /*!< EPWM_T::BRKCTL2_3: EADC1LBEN Position */
#define EPWM_BRKCTL2_3_EADC1LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC1LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC1LBEN Mask */
#define EPWM_BRKCTL2_3_EADC2LBEN_Pos (30) /*!< EPWM_T::BRKCTL2_3: EADC2LBEN Position */
#define EPWM_BRKCTL2_3_EADC2LBEN_Msk (0x1ul << EPWM_BRKCTL2_3_EADC2LBEN_Pos) /*!< EPWM_T::BRKCTL2_3: EADC2LBEN Mask */
#define EPWM_BRKCTL4_5_CPO0EBEN_Pos (0) /*!< EPWM_T::BRKCTL4_5: CPO0EBEN Position */
#define EPWM_BRKCTL4_5_CPO0EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO0EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO0EBEN Mask */
#define EPWM_BRKCTL4_5_CPO1EBEN_Pos (1) /*!< EPWM_T::BRKCTL4_5: CPO1EBEN Position */
#define EPWM_BRKCTL4_5_CPO1EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO1EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO1EBEN Mask */
#define EPWM_BRKCTL4_5_CPO2EBEN_Pos (2) /*!< EPWM_T::BRKCTL4_5: CPO2EBEN Position */
#define EPWM_BRKCTL4_5_CPO2EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO2EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO2EBEN Mask */
#define EPWM_BRKCTL4_5_CPO3EBEN_Pos (3) /*!< EPWM_T::BRKCTL4_5: CPO3EBEN Position */
#define EPWM_BRKCTL4_5_CPO3EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO3EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO3EBEN Mask */
#define EPWM_BRKCTL4_5_BRKP0EEN_Pos (4) /*!< EPWM_T::BRKCTL4_5: BRKP0EEN Position */
#define EPWM_BRKCTL4_5_BRKP0EEN_Msk (0x1ul << EPWM_BRKCTL4_5_BRKP0EEN_Pos) /*!< EPWM_T::BRKCTL4_5: BRKP0EEN Mask */
#define EPWM_BRKCTL4_5_BRKP1EEN_Pos (5) /*!< EPWM_T::BRKCTL4_5: BRKP1EEN Position */
#define EPWM_BRKCTL4_5_BRKP1EEN_Msk (0x1ul << EPWM_BRKCTL4_5_BRKP1EEN_Pos) /*!< EPWM_T::BRKCTL4_5: BRKP1EEN Mask */
#define EPWM_BRKCTL4_5_SYSEBEN_Pos (7) /*!< EPWM_T::BRKCTL4_5: SYSEBEN Position */
#define EPWM_BRKCTL4_5_SYSEBEN_Msk (0x1ul << EPWM_BRKCTL4_5_SYSEBEN_Pos) /*!< EPWM_T::BRKCTL4_5: SYSEBEN Mask */
#define EPWM_BRKCTL4_5_CPO0LBEN_Pos (8) /*!< EPWM_T::BRKCTL4_5: CPO0LBEN Position */
#define EPWM_BRKCTL4_5_CPO0LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO0LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO0LBEN Mask */
#define EPWM_BRKCTL4_5_CPO1LBEN_Pos (9) /*!< EPWM_T::BRKCTL4_5: CPO1LBEN Position */
#define EPWM_BRKCTL4_5_CPO1LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO1LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO1LBEN Mask */
#define EPWM_BRKCTL4_5_CPO2LBEN_Pos (10) /*!< EPWM_T::BRKCTL4_5: CPO2LBEN Position */
#define EPWM_BRKCTL4_5_CPO2LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO2LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO2LBEN Mask */
#define EPWM_BRKCTL4_5_CPO3LBEN_Pos (11) /*!< EPWM_T::BRKCTL4_5: CPO3LBEN Position */
#define EPWM_BRKCTL4_5_CPO3LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_CPO3LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: CPO3LBEN Mask */
#define EPWM_BRKCTL4_5_BRKP0LEN_Pos (12) /*!< EPWM_T::BRKCTL4_5: BRKP0LEN Position */
#define EPWM_BRKCTL4_5_BRKP0LEN_Msk (0x1ul << EPWM_BRKCTL4_5_BRKP0LEN_Pos) /*!< EPWM_T::BRKCTL4_5: BRKP0LEN Mask */
#define EPWM_BRKCTL4_5_BRKP1LEN_Pos (13) /*!< EPWM_T::BRKCTL4_5: BRKP1LEN Position */
#define EPWM_BRKCTL4_5_BRKP1LEN_Msk (0x1ul << EPWM_BRKCTL4_5_BRKP1LEN_Pos) /*!< EPWM_T::BRKCTL4_5: BRKP1LEN Mask */
#define EPWM_BRKCTL4_5_SYSLBEN_Pos (15) /*!< EPWM_T::BRKCTL4_5: SYSLBEN Position */
#define EPWM_BRKCTL4_5_SYSLBEN_Msk (0x1ul << EPWM_BRKCTL4_5_SYSLBEN_Pos) /*!< EPWM_T::BRKCTL4_5: SYSLBEN Mask */
#define EPWM_BRKCTL4_5_BRKAEVEN_Pos (16) /*!< EPWM_T::BRKCTL4_5: BRKAEVEN Position */
#define EPWM_BRKCTL4_5_BRKAEVEN_Msk (0x3ul << EPWM_BRKCTL4_5_BRKAEVEN_Pos) /*!< EPWM_T::BRKCTL4_5: BRKAEVEN Mask */
#define EPWM_BRKCTL4_5_BRKAODD_Pos (18) /*!< EPWM_T::BRKCTL4_5: BRKAODD Position */
#define EPWM_BRKCTL4_5_BRKAODD_Msk (0x3ul << EPWM_BRKCTL4_5_BRKAODD_Pos) /*!< EPWM_T::BRKCTL4_5: BRKAODD Mask */
#define EPWM_BRKCTL4_5_EADC0EBEN_Pos (20) /*!< EPWM_T::BRKCTL4_5: EADC0EBEN Position */
#define EPWM_BRKCTL4_5_EADC0EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC0EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC0EBEN Mask */
#define EPWM_BRKCTL4_5_EADC1EBEN_Pos (21) /*!< EPWM_T::BRKCTL4_5: EADC1EBEN Position */
#define EPWM_BRKCTL4_5_EADC1EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC1EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC1EBEN Mask */
#define EPWM_BRKCTL4_5_EADC2EBEN_Pos (22) /*!< EPWM_T::BRKCTL4_5: EADC2EBEN Position */
#define EPWM_BRKCTL4_5_EADC2EBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC2EBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC2EBEN Mask */
#define EPWM_BRKCTL4_5_EADC0LBEN_Pos (28) /*!< EPWM_T::BRKCTL4_5: EADC0LBEN Position */
#define EPWM_BRKCTL4_5_EADC0LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC0LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC0LBEN Mask */
#define EPWM_BRKCTL4_5_EADC1LBEN_Pos (29) /*!< EPWM_T::BRKCTL4_5: EADC1LBEN Position */
#define EPWM_BRKCTL4_5_EADC1LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC1LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC1LBEN Mask */
#define EPWM_BRKCTL4_5_EADC2LBEN_Pos (30) /*!< EPWM_T::BRKCTL4_5: EADC2LBEN Position */
#define EPWM_BRKCTL4_5_EADC2LBEN_Msk (0x1ul << EPWM_BRKCTL4_5_EADC2LBEN_Pos) /*!< EPWM_T::BRKCTL4_5: EADC2LBEN Mask */
#define EPWM_POLCTL_PINV0_Pos (0) /*!< EPWM_T::POLCTL: PINV0 Position */
#define EPWM_POLCTL_PINV0_Msk (0x1ul << EPWM_POLCTL_PINV0_Pos) /*!< EPWM_T::POLCTL: PINV0 Mask */
#define EPWM_POLCTL_PINV1_Pos (1) /*!< EPWM_T::POLCTL: PINV1 Position */
#define EPWM_POLCTL_PINV1_Msk (0x1ul << EPWM_POLCTL_PINV1_Pos) /*!< EPWM_T::POLCTL: PINV1 Mask */
#define EPWM_POLCTL_PINV2_Pos (2) /*!< EPWM_T::POLCTL: PINV2 Position */
#define EPWM_POLCTL_PINV2_Msk (0x1ul << EPWM_POLCTL_PINV2_Pos) /*!< EPWM_T::POLCTL: PINV2 Mask */
#define EPWM_POLCTL_PINV3_Pos (3) /*!< EPWM_T::POLCTL: PINV3 Position */
#define EPWM_POLCTL_PINV3_Msk (0x1ul << EPWM_POLCTL_PINV3_Pos) /*!< EPWM_T::POLCTL: PINV3 Mask */
#define EPWM_POLCTL_PINV4_Pos (4) /*!< EPWM_T::POLCTL: PINV4 Position */
#define EPWM_POLCTL_PINV4_Msk (0x1ul << EPWM_POLCTL_PINV4_Pos) /*!< EPWM_T::POLCTL: PINV4 Mask */
#define EPWM_POLCTL_PINV5_Pos (5) /*!< EPWM_T::POLCTL: PINV5 Position */
#define EPWM_POLCTL_PINV5_Msk (0x1ul << EPWM_POLCTL_PINV5_Pos) /*!< EPWM_T::POLCTL: PINV5 Mask */
#define EPWM_POEN_POEN0_Pos (0) /*!< EPWM_T::POEN: POEN0 Position */
#define EPWM_POEN_POEN0_Msk (0x1ul << EPWM_POEN_POEN0_Pos) /*!< EPWM_T::POEN: POEN0 Mask */
#define EPWM_POEN_POEN1_Pos (1) /*!< EPWM_T::POEN: POEN1 Position */
#define EPWM_POEN_POEN1_Msk (0x1ul << EPWM_POEN_POEN1_Pos) /*!< EPWM_T::POEN: POEN1 Mask */
#define EPWM_POEN_POEN2_Pos (2) /*!< EPWM_T::POEN: POEN2 Position */
#define EPWM_POEN_POEN2_Msk (0x1ul << EPWM_POEN_POEN2_Pos) /*!< EPWM_T::POEN: POEN2 Mask */
#define EPWM_POEN_POEN3_Pos (3) /*!< EPWM_T::POEN: POEN3 Position */
#define EPWM_POEN_POEN3_Msk (0x1ul << EPWM_POEN_POEN3_Pos) /*!< EPWM_T::POEN: POEN3 Mask */
#define EPWM_POEN_POEN4_Pos (4) /*!< EPWM_T::POEN: POEN4 Position */
#define EPWM_POEN_POEN4_Msk (0x1ul << EPWM_POEN_POEN4_Pos) /*!< EPWM_T::POEN: POEN4 Mask */
#define EPWM_POEN_POEN5_Pos (5) /*!< EPWM_T::POEN: POEN5 Position */
#define EPWM_POEN_POEN5_Msk (0x1ul << EPWM_POEN_POEN5_Pos) /*!< EPWM_T::POEN: POEN5 Mask */
#define EPWM_SWBRK_BRKETRG0_Pos (0) /*!< EPWM_T::SWBRK: BRKETRG0 Position */
#define EPWM_SWBRK_BRKETRG0_Msk (0x1ul << EPWM_SWBRK_BRKETRG0_Pos) /*!< EPWM_T::SWBRK: BRKETRG0 Mask */
#define EPWM_SWBRK_BRKETRG2_Pos (1) /*!< EPWM_T::SWBRK: BRKETRG2 Position */
#define EPWM_SWBRK_BRKETRG2_Msk (0x1ul << EPWM_SWBRK_BRKETRG2_Pos) /*!< EPWM_T::SWBRK: BRKETRG2 Mask */
#define EPWM_SWBRK_BRKETRG4_Pos (2) /*!< EPWM_T::SWBRK: BRKETRG4 Position */
#define EPWM_SWBRK_BRKETRG4_Msk (0x1ul << EPWM_SWBRK_BRKETRG4_Pos) /*!< EPWM_T::SWBRK: BRKETRG4 Mask */
#define EPWM_SWBRK_BRKLTRG0_Pos (8) /*!< EPWM_T::SWBRK: BRKLTRG0 Position */
#define EPWM_SWBRK_BRKLTRG0_Msk (0x1ul << EPWM_SWBRK_BRKLTRG0_Pos) /*!< EPWM_T::SWBRK: BRKLTRG0 Mask */
#define EPWM_SWBRK_BRKLTRG2_Pos (9) /*!< EPWM_T::SWBRK: BRKLTRG2 Position */
#define EPWM_SWBRK_BRKLTRG2_Msk (0x1ul << EPWM_SWBRK_BRKLTRG2_Pos) /*!< EPWM_T::SWBRK: BRKLTRG2 Mask */
#define EPWM_SWBRK_BRKLTRG4_Pos (10) /*!< EPWM_T::SWBRK: BRKLTRG4 Position */
#define EPWM_SWBRK_BRKLTRG4_Msk (0x1ul << EPWM_SWBRK_BRKLTRG4_Pos) /*!< EPWM_T::SWBRK: BRKLTRG4 Mask */
#define EPWM_INTEN0_ZIEN0_Pos (0) /*!< EPWM_T::INTEN0: ZIEN0 Position */
#define EPWM_INTEN0_ZIEN0_Msk (0x1ul << EPWM_INTEN0_ZIEN0_Pos) /*!< EPWM_T::INTEN0: ZIEN0 Mask */
#define EPWM_INTEN0_ZIEN1_Pos (1) /*!< EPWM_T::INTEN0: ZIEN1 Position */
#define EPWM_INTEN0_ZIEN1_Msk (0x1ul << EPWM_INTEN0_ZIEN1_Pos) /*!< EPWM_T::INTEN0: ZIEN1 Mask */
#define EPWM_INTEN0_ZIEN2_Pos (2) /*!< EPWM_T::INTEN0: ZIEN2 Position */
#define EPWM_INTEN0_ZIEN2_Msk (0x1ul << EPWM_INTEN0_ZIEN2_Pos) /*!< EPWM_T::INTEN0: ZIEN2 Mask */
#define EPWM_INTEN0_ZIEN3_Pos (3) /*!< EPWM_T::INTEN0: ZIEN3 Position */
#define EPWM_INTEN0_ZIEN3_Msk (0x1ul << EPWM_INTEN0_ZIEN3_Pos) /*!< EPWM_T::INTEN0: ZIEN3 Mask */
#define EPWM_INTEN0_ZIEN4_Pos (4) /*!< EPWM_T::INTEN0: ZIEN4 Position */
#define EPWM_INTEN0_ZIEN4_Msk (0x1ul << EPWM_INTEN0_ZIEN4_Pos) /*!< EPWM_T::INTEN0: ZIEN4 Mask */
#define EPWM_INTEN0_ZIEN5_Pos (5) /*!< EPWM_T::INTEN0: ZIEN5 Position */
#define EPWM_INTEN0_ZIEN5_Msk (0x1ul << EPWM_INTEN0_ZIEN5_Pos) /*!< EPWM_T::INTEN0: ZIEN5 Mask */
#define EPWM_INTEN0_PIEN0_Pos (8) /*!< EPWM_T::INTEN0: PIEN0 Position */
#define EPWM_INTEN0_PIEN0_Msk (0x1ul << EPWM_INTEN0_PIEN0_Pos) /*!< EPWM_T::INTEN0: PIEN0 Mask */
#define EPWM_INTEN0_PIEN1_Pos (9) /*!< EPWM_T::INTEN0: PIEN1 Position */
#define EPWM_INTEN0_PIEN1_Msk (0x1ul << EPWM_INTEN0_PIEN1_Pos) /*!< EPWM_T::INTEN0: PIEN1 Mask */
#define EPWM_INTEN0_PIEN2_Pos (10) /*!< EPWM_T::INTEN0: PIEN2 Position */
#define EPWM_INTEN0_PIEN2_Msk (0x1ul << EPWM_INTEN0_PIEN2_Pos) /*!< EPWM_T::INTEN0: PIEN2 Mask */
#define EPWM_INTEN0_PIEN3_Pos (11) /*!< EPWM_T::INTEN0: PIEN3 Position */
#define EPWM_INTEN0_PIEN3_Msk (0x1ul << EPWM_INTEN0_PIEN3_Pos) /*!< EPWM_T::INTEN0: PIEN3 Mask */
#define EPWM_INTEN0_PIEN4_Pos (12) /*!< EPWM_T::INTEN0: PIEN4 Position */
#define EPWM_INTEN0_PIEN4_Msk (0x1ul << EPWM_INTEN0_PIEN4_Pos) /*!< EPWM_T::INTEN0: PIEN4 Mask */
#define EPWM_INTEN0_PIEN5_Pos (13) /*!< EPWM_T::INTEN0: PIEN5 Position */
#define EPWM_INTEN0_PIEN5_Msk (0x1ul << EPWM_INTEN0_PIEN5_Pos) /*!< EPWM_T::INTEN0: PIEN5 Mask */
#define EPWM_INTEN0_CMPUIEN0_Pos (16) /*!< EPWM_T::INTEN0: CMPUIEN0 Position */
#define EPWM_INTEN0_CMPUIEN0_Msk (0x1ul << EPWM_INTEN0_CMPUIEN0_Pos) /*!< EPWM_T::INTEN0: CMPUIEN0 Mask */
#define EPWM_INTEN0_CMPUIEN1_Pos (17) /*!< EPWM_T::INTEN0: CMPUIEN1 Position */
#define EPWM_INTEN0_CMPUIEN1_Msk (0x1ul << EPWM_INTEN0_CMPUIEN1_Pos) /*!< EPWM_T::INTEN0: CMPUIEN1 Mask */
#define EPWM_INTEN0_CMPUIEN2_Pos (18) /*!< EPWM_T::INTEN0: CMPUIEN2 Position */
#define EPWM_INTEN0_CMPUIEN2_Msk (0x1ul << EPWM_INTEN0_CMPUIEN2_Pos) /*!< EPWM_T::INTEN0: CMPUIEN2 Mask */
#define EPWM_INTEN0_CMPUIEN3_Pos (19) /*!< EPWM_T::INTEN0: CMPUIEN3 Position */
#define EPWM_INTEN0_CMPUIEN3_Msk (0x1ul << EPWM_INTEN0_CMPUIEN3_Pos) /*!< EPWM_T::INTEN0: CMPUIEN3 Mask */
#define EPWM_INTEN0_CMPUIEN4_Pos (20) /*!< EPWM_T::INTEN0: CMPUIEN4 Position */
#define EPWM_INTEN0_CMPUIEN4_Msk (0x1ul << EPWM_INTEN0_CMPUIEN4_Pos) /*!< EPWM_T::INTEN0: CMPUIEN4 Mask */
#define EPWM_INTEN0_CMPUIEN5_Pos (21) /*!< EPWM_T::INTEN0: CMPUIEN5 Position */
#define EPWM_INTEN0_CMPUIEN5_Msk (0x1ul << EPWM_INTEN0_CMPUIEN5_Pos) /*!< EPWM_T::INTEN0: CMPUIEN5 Mask */
#define EPWM_INTEN0_CMPDIEN0_Pos (24) /*!< EPWM_T::INTEN0: CMPDIEN0 Position */
#define EPWM_INTEN0_CMPDIEN0_Msk (0x1ul << EPWM_INTEN0_CMPDIEN0_Pos) /*!< EPWM_T::INTEN0: CMPDIEN0 Mask */
#define EPWM_INTEN0_CMPDIEN1_Pos (25) /*!< EPWM_T::INTEN0: CMPDIEN1 Position */
#define EPWM_INTEN0_CMPDIEN1_Msk (0x1ul << EPWM_INTEN0_CMPDIEN1_Pos) /*!< EPWM_T::INTEN0: CMPDIEN1 Mask */
#define EPWM_INTEN0_CMPDIEN2_Pos (26) /*!< EPWM_T::INTEN0: CMPDIEN2 Position */
#define EPWM_INTEN0_CMPDIEN2_Msk (0x1ul << EPWM_INTEN0_CMPDIEN2_Pos) /*!< EPWM_T::INTEN0: CMPDIEN2 Mask */
#define EPWM_INTEN0_CMPDIEN3_Pos (27) /*!< EPWM_T::INTEN0: CMPDIEN3 Position */
#define EPWM_INTEN0_CMPDIEN3_Msk (0x1ul << EPWM_INTEN0_CMPDIEN3_Pos) /*!< EPWM_T::INTEN0: CMPDIEN3 Mask */
#define EPWM_INTEN0_CMPDIEN4_Pos (28) /*!< EPWM_T::INTEN0: CMPDIEN4 Position */
#define EPWM_INTEN0_CMPDIEN4_Msk (0x1ul << EPWM_INTEN0_CMPDIEN4_Pos) /*!< EPWM_T::INTEN0: CMPDIEN4 Mask */
#define EPWM_INTEN0_CMPDIEN5_Pos (29) /*!< EPWM_T::INTEN0: CMPDIEN5 Position */
#define EPWM_INTEN0_CMPDIEN5_Msk (0x1ul << EPWM_INTEN0_CMPDIEN5_Pos) /*!< EPWM_T::INTEN0: CMPDIEN5 Mask */
#define EPWM_INTEN1_BRKEIEN0_1_Pos (0) /*!< EPWM_T::INTEN1: BRKEIEN0_1 Position */
#define EPWM_INTEN1_BRKEIEN0_1_Msk (0x1ul << EPWM_INTEN1_BRKEIEN0_1_Pos) /*!< EPWM_T::INTEN1: BRKEIEN0_1 Mask */
#define EPWM_INTEN1_BRKEIEN2_3_Pos (1) /*!< EPWM_T::INTEN1: BRKEIEN2_3 Position */
#define EPWM_INTEN1_BRKEIEN2_3_Msk (0x1ul << EPWM_INTEN1_BRKEIEN2_3_Pos) /*!< EPWM_T::INTEN1: BRKEIEN2_3 Mask */
#define EPWM_INTEN1_BRKEIEN4_5_Pos (2) /*!< EPWM_T::INTEN1: BRKEIEN4_5 Position */
#define EPWM_INTEN1_BRKEIEN4_5_Msk (0x1ul << EPWM_INTEN1_BRKEIEN4_5_Pos) /*!< EPWM_T::INTEN1: BRKEIEN4_5 Mask */
#define EPWM_INTEN1_BRKLIEN0_1_Pos (8) /*!< EPWM_T::INTEN1: BRKLIEN0_1 Position */
#define EPWM_INTEN1_BRKLIEN0_1_Msk (0x1ul << EPWM_INTEN1_BRKLIEN0_1_Pos) /*!< EPWM_T::INTEN1: BRKLIEN0_1 Mask */
#define EPWM_INTEN1_BRKLIEN2_3_Pos (9) /*!< EPWM_T::INTEN1: BRKLIEN2_3 Position */
#define EPWM_INTEN1_BRKLIEN2_3_Msk (0x1ul << EPWM_INTEN1_BRKLIEN2_3_Pos) /*!< EPWM_T::INTEN1: BRKLIEN2_3 Mask */
#define EPWM_INTEN1_BRKLIEN4_5_Pos (10) /*!< EPWM_T::INTEN1: BRKLIEN4_5 Position */
#define EPWM_INTEN1_BRKLIEN4_5_Msk (0x1ul << EPWM_INTEN1_BRKLIEN4_5_Pos) /*!< EPWM_T::INTEN1: BRKLIEN4_5 Mask */
#define EPWM_INTSTS0_ZIF0_Pos (0) /*!< EPWM_T::INTSTS0: ZIF0 Position */
#define EPWM_INTSTS0_ZIF0_Msk (0x1ul << EPWM_INTSTS0_ZIF0_Pos) /*!< EPWM_T::INTSTS0: ZIF0 Mask */
#define EPWM_INTSTS0_ZIF1_Pos (1) /*!< EPWM_T::INTSTS0: ZIF1 Position */
#define EPWM_INTSTS0_ZIF1_Msk (0x1ul << EPWM_INTSTS0_ZIF1_Pos) /*!< EPWM_T::INTSTS0: ZIF1 Mask */
#define EPWM_INTSTS0_ZIF2_Pos (2) /*!< EPWM_T::INTSTS0: ZIF2 Position */
#define EPWM_INTSTS0_ZIF2_Msk (0x1ul << EPWM_INTSTS0_ZIF2_Pos) /*!< EPWM_T::INTSTS0: ZIF2 Mask */
#define EPWM_INTSTS0_ZIF3_Pos (3) /*!< EPWM_T::INTSTS0: ZIF3 Position */
#define EPWM_INTSTS0_ZIF3_Msk (0x1ul << EPWM_INTSTS0_ZIF3_Pos) /*!< EPWM_T::INTSTS0: ZIF3 Mask */
#define EPWM_INTSTS0_ZIF4_Pos (4) /*!< EPWM_T::INTSTS0: ZIF4 Position */
#define EPWM_INTSTS0_ZIF4_Msk (0x1ul << EPWM_INTSTS0_ZIF4_Pos) /*!< EPWM_T::INTSTS0: ZIF4 Mask */
#define EPWM_INTSTS0_ZIF5_Pos (5) /*!< EPWM_T::INTSTS0: ZIF5 Position */
#define EPWM_INTSTS0_ZIF5_Msk (0x1ul << EPWM_INTSTS0_ZIF5_Pos) /*!< EPWM_T::INTSTS0: ZIF5 Mask */
#define EPWM_INTSTS0_PIF0_Pos (8) /*!< EPWM_T::INTSTS0: PIF0 Position */
#define EPWM_INTSTS0_PIF0_Msk (0x1ul << EPWM_INTSTS0_PIF0_Pos) /*!< EPWM_T::INTSTS0: PIF0 Mask */
#define EPWM_INTSTS0_PIF1_Pos (9) /*!< EPWM_T::INTSTS0: PIF1 Position */
#define EPWM_INTSTS0_PIF1_Msk (0x1ul << EPWM_INTSTS0_PIF1_Pos) /*!< EPWM_T::INTSTS0: PIF1 Mask */
#define EPWM_INTSTS0_PIF2_Pos (10) /*!< EPWM_T::INTSTS0: PIF2 Position */
#define EPWM_INTSTS0_PIF2_Msk (0x1ul << EPWM_INTSTS0_PIF2_Pos) /*!< EPWM_T::INTSTS0: PIF2 Mask */
#define EPWM_INTSTS0_PIF3_Pos (11) /*!< EPWM_T::INTSTS0: PIF3 Position */
#define EPWM_INTSTS0_PIF3_Msk (0x1ul << EPWM_INTSTS0_PIF3_Pos) /*!< EPWM_T::INTSTS0: PIF3 Mask */
#define EPWM_INTSTS0_PIF4_Pos (12) /*!< EPWM_T::INTSTS0: PIF4 Position */
#define EPWM_INTSTS0_PIF4_Msk (0x1ul << EPWM_INTSTS0_PIF4_Pos) /*!< EPWM_T::INTSTS0: PIF4 Mask */
#define EPWM_INTSTS0_PIF5_Pos (13) /*!< EPWM_T::INTSTS0: PIF5 Position */
#define EPWM_INTSTS0_PIF5_Msk (0x1ul << EPWM_INTSTS0_PIF5_Pos) /*!< EPWM_T::INTSTS0: PIF5 Mask */
#define EPWM_INTSTS0_CMPUIF0_Pos (16) /*!< EPWM_T::INTSTS0: CMPUIF0 Position */
#define EPWM_INTSTS0_CMPUIF0_Msk (0x1ul << EPWM_INTSTS0_CMPUIF0_Pos) /*!< EPWM_T::INTSTS0: CMPUIF0 Mask */
#define EPWM_INTSTS0_CMPUIF1_Pos (17) /*!< EPWM_T::INTSTS0: CMPUIF1 Position */
#define EPWM_INTSTS0_CMPUIF1_Msk (0x1ul << EPWM_INTSTS0_CMPUIF1_Pos) /*!< EPWM_T::INTSTS0: CMPUIF1 Mask */
#define EPWM_INTSTS0_CMPUIF2_Pos (18) /*!< EPWM_T::INTSTS0: CMPUIF2 Position */
#define EPWM_INTSTS0_CMPUIF2_Msk (0x1ul << EPWM_INTSTS0_CMPUIF2_Pos) /*!< EPWM_T::INTSTS0: CMPUIF2 Mask */
#define EPWM_INTSTS0_CMPUIF3_Pos (19) /*!< EPWM_T::INTSTS0: CMPUIF3 Position */
#define EPWM_INTSTS0_CMPUIF3_Msk (0x1ul << EPWM_INTSTS0_CMPUIF3_Pos) /*!< EPWM_T::INTSTS0: CMPUIF3 Mask */
#define EPWM_INTSTS0_CMPUIF4_Pos (20) /*!< EPWM_T::INTSTS0: CMPUIF4 Position */
#define EPWM_INTSTS0_CMPUIF4_Msk (0x1ul << EPWM_INTSTS0_CMPUIF4_Pos) /*!< EPWM_T::INTSTS0: CMPUIF4 Mask */
#define EPWM_INTSTS0_CMPUIF5_Pos (21) /*!< EPWM_T::INTSTS0: CMPUIF5 Position */
#define EPWM_INTSTS0_CMPUIF5_Msk (0x1ul << EPWM_INTSTS0_CMPUIF5_Pos) /*!< EPWM_T::INTSTS0: CMPUIF5 Mask */
#define EPWM_INTSTS0_CMPDIF0_Pos (24) /*!< EPWM_T::INTSTS0: CMPDIF0 Position */
#define EPWM_INTSTS0_CMPDIF0_Msk (0x1ul << EPWM_INTSTS0_CMPDIF0_Pos) /*!< EPWM_T::INTSTS0: CMPDIF0 Mask */
#define EPWM_INTSTS0_CMPDIF1_Pos (25) /*!< EPWM_T::INTSTS0: CMPDIF1 Position */
#define EPWM_INTSTS0_CMPDIF1_Msk (0x1ul << EPWM_INTSTS0_CMPDIF1_Pos) /*!< EPWM_T::INTSTS0: CMPDIF1 Mask */
#define EPWM_INTSTS0_CMPDIF2_Pos (26) /*!< EPWM_T::INTSTS0: CMPDIF2 Position */
#define EPWM_INTSTS0_CMPDIF2_Msk (0x1ul << EPWM_INTSTS0_CMPDIF2_Pos) /*!< EPWM_T::INTSTS0: CMPDIF2 Mask */
#define EPWM_INTSTS0_CMPDIF3_Pos (27) /*!< EPWM_T::INTSTS0: CMPDIF3 Position */
#define EPWM_INTSTS0_CMPDIF3_Msk (0x1ul << EPWM_INTSTS0_CMPDIF3_Pos) /*!< EPWM_T::INTSTS0: CMPDIF3 Mask */
#define EPWM_INTSTS0_CMPDIF4_Pos (28) /*!< EPWM_T::INTSTS0: CMPDIF4 Position */
#define EPWM_INTSTS0_CMPDIF4_Msk (0x1ul << EPWM_INTSTS0_CMPDIF4_Pos) /*!< EPWM_T::INTSTS0: CMPDIF4 Mask */
#define EPWM_INTSTS0_CMPDIF5_Pos (29) /*!< EPWM_T::INTSTS0: CMPDIF5 Position */
#define EPWM_INTSTS0_CMPDIF5_Msk (0x1ul << EPWM_INTSTS0_CMPDIF5_Pos) /*!< EPWM_T::INTSTS0: CMPDIF5 Mask */
#define EPWM_INTSTS1_BRKEIF0_Pos (0) /*!< EPWM_T::INTSTS1: BRKEIF0 Position */
#define EPWM_INTSTS1_BRKEIF0_Msk (0x1ul << EPWM_INTSTS1_BRKEIF0_Pos) /*!< EPWM_T::INTSTS1: BRKEIF0 Mask */
#define EPWM_INTSTS1_BRKEIF1_Pos (1) /*!< EPWM_T::INTSTS1: BRKEIF1 Position */
#define EPWM_INTSTS1_BRKEIF1_Msk (0x1ul << EPWM_INTSTS1_BRKEIF1_Pos) /*!< EPWM_T::INTSTS1: BRKEIF1 Mask */
#define EPWM_INTSTS1_BRKEIF2_Pos (2) /*!< EPWM_T::INTSTS1: BRKEIF2 Position */
#define EPWM_INTSTS1_BRKEIF2_Msk (0x1ul << EPWM_INTSTS1_BRKEIF2_Pos) /*!< EPWM_T::INTSTS1: BRKEIF2 Mask */
#define EPWM_INTSTS1_BRKEIF3_Pos (3) /*!< EPWM_T::INTSTS1: BRKEIF3 Position */
#define EPWM_INTSTS1_BRKEIF3_Msk (0x1ul << EPWM_INTSTS1_BRKEIF3_Pos) /*!< EPWM_T::INTSTS1: BRKEIF3 Mask */
#define EPWM_INTSTS1_BRKEIF4_Pos (4) /*!< EPWM_T::INTSTS1: BRKEIF4 Position */
#define EPWM_INTSTS1_BRKEIF4_Msk (0x1ul << EPWM_INTSTS1_BRKEIF4_Pos) /*!< EPWM_T::INTSTS1: BRKEIF4 Mask */
#define EPWM_INTSTS1_BRKEIF5_Pos (5) /*!< EPWM_T::INTSTS1: BRKEIF5 Position */
#define EPWM_INTSTS1_BRKEIF5_Msk (0x1ul << EPWM_INTSTS1_BRKEIF5_Pos) /*!< EPWM_T::INTSTS1: BRKEIF5 Mask */
#define EPWM_INTSTS1_BRKLIF0_Pos (8) /*!< EPWM_T::INTSTS1: BRKLIF0 Position */
#define EPWM_INTSTS1_BRKLIF0_Msk (0x1ul << EPWM_INTSTS1_BRKLIF0_Pos) /*!< EPWM_T::INTSTS1: BRKLIF0 Mask */
#define EPWM_INTSTS1_BRKLIF1_Pos (9) /*!< EPWM_T::INTSTS1: BRKLIF1 Position */
#define EPWM_INTSTS1_BRKLIF1_Msk (0x1ul << EPWM_INTSTS1_BRKLIF1_Pos) /*!< EPWM_T::INTSTS1: BRKLIF1 Mask */
#define EPWM_INTSTS1_BRKLIF2_Pos (10) /*!< EPWM_T::INTSTS1: BRKLIF2 Position */
#define EPWM_INTSTS1_BRKLIF2_Msk (0x1ul << EPWM_INTSTS1_BRKLIF2_Pos) /*!< EPWM_T::INTSTS1: BRKLIF2 Mask */
#define EPWM_INTSTS1_BRKLIF3_Pos (11) /*!< EPWM_T::INTSTS1: BRKLIF3 Position */
#define EPWM_INTSTS1_BRKLIF3_Msk (0x1ul << EPWM_INTSTS1_BRKLIF3_Pos) /*!< EPWM_T::INTSTS1: BRKLIF3 Mask */
#define EPWM_INTSTS1_BRKLIF4_Pos (12) /*!< EPWM_T::INTSTS1: BRKLIF4 Position */
#define EPWM_INTSTS1_BRKLIF4_Msk (0x1ul << EPWM_INTSTS1_BRKLIF4_Pos) /*!< EPWM_T::INTSTS1: BRKLIF4 Mask */
#define EPWM_INTSTS1_BRKLIF5_Pos (13) /*!< EPWM_T::INTSTS1: BRKLIF5 Position */
#define EPWM_INTSTS1_BRKLIF5_Msk (0x1ul << EPWM_INTSTS1_BRKLIF5_Pos) /*!< EPWM_T::INTSTS1: BRKLIF5 Mask */
#define EPWM_INTSTS1_BRKESTS0_Pos (16) /*!< EPWM_T::INTSTS1: BRKESTS0 Position */
#define EPWM_INTSTS1_BRKESTS0_Msk (0x1ul << EPWM_INTSTS1_BRKESTS0_Pos) /*!< EPWM_T::INTSTS1: BRKESTS0 Mask */
#define EPWM_INTSTS1_BRKESTS1_Pos (17) /*!< EPWM_T::INTSTS1: BRKESTS1 Position */
#define EPWM_INTSTS1_BRKESTS1_Msk (0x1ul << EPWM_INTSTS1_BRKESTS1_Pos) /*!< EPWM_T::INTSTS1: BRKESTS1 Mask */
#define EPWM_INTSTS1_BRKESTS2_Pos (18) /*!< EPWM_T::INTSTS1: BRKESTS2 Position */
#define EPWM_INTSTS1_BRKESTS2_Msk (0x1ul << EPWM_INTSTS1_BRKESTS2_Pos) /*!< EPWM_T::INTSTS1: BRKESTS2 Mask */
#define EPWM_INTSTS1_BRKESTS3_Pos (19) /*!< EPWM_T::INTSTS1: BRKESTS3 Position */
#define EPWM_INTSTS1_BRKESTS3_Msk (0x1ul << EPWM_INTSTS1_BRKESTS3_Pos) /*!< EPWM_T::INTSTS1: BRKESTS3 Mask */
#define EPWM_INTSTS1_BRKESTS4_Pos (20) /*!< EPWM_T::INTSTS1: BRKESTS4 Position */
#define EPWM_INTSTS1_BRKESTS4_Msk (0x1ul << EPWM_INTSTS1_BRKESTS4_Pos) /*!< EPWM_T::INTSTS1: BRKESTS4 Mask */
#define EPWM_INTSTS1_BRKESTS5_Pos (21) /*!< EPWM_T::INTSTS1: BRKESTS5 Position */
#define EPWM_INTSTS1_BRKESTS5_Msk (0x1ul << EPWM_INTSTS1_BRKESTS5_Pos) /*!< EPWM_T::INTSTS1: BRKESTS5 Mask */
#define EPWM_INTSTS1_BRKLSTS0_Pos (24) /*!< EPWM_T::INTSTS1: BRKLSTS0 Position */
#define EPWM_INTSTS1_BRKLSTS0_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS0_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS0 Mask */
#define EPWM_INTSTS1_BRKLSTS1_Pos (25) /*!< EPWM_T::INTSTS1: BRKLSTS1 Position */
#define EPWM_INTSTS1_BRKLSTS1_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS1_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS1 Mask */
#define EPWM_INTSTS1_BRKLSTS2_Pos (26) /*!< EPWM_T::INTSTS1: BRKLSTS2 Position */
#define EPWM_INTSTS1_BRKLSTS2_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS2_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS2 Mask */
#define EPWM_INTSTS1_BRKLSTS3_Pos (27) /*!< EPWM_T::INTSTS1: BRKLSTS3 Position */
#define EPWM_INTSTS1_BRKLSTS3_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS3_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS3 Mask */
#define EPWM_INTSTS1_BRKLSTS4_Pos (28) /*!< EPWM_T::INTSTS1: BRKLSTS4 Position */
#define EPWM_INTSTS1_BRKLSTS4_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS4_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS4 Mask */
#define EPWM_INTSTS1_BRKLSTS5_Pos (29) /*!< EPWM_T::INTSTS1: BRKLSTS5 Position */
#define EPWM_INTSTS1_BRKLSTS5_Msk (0x1ul << EPWM_INTSTS1_BRKLSTS5_Pos) /*!< EPWM_T::INTSTS1: BRKLSTS5 Mask */
#define EPWM_DACTRGEN_ZTE0_Pos (0) /*!< EPWM_T::DACTRGEN: ZTE0 Position */
#define EPWM_DACTRGEN_ZTE0_Msk (0x1ul << EPWM_DACTRGEN_ZTE0_Pos) /*!< EPWM_T::DACTRGEN: ZTE0 Mask */
#define EPWM_DACTRGEN_ZTE1_Pos (1) /*!< EPWM_T::DACTRGEN: ZTE1 Position */
#define EPWM_DACTRGEN_ZTE1_Msk (0x1ul << EPWM_DACTRGEN_ZTE1_Pos) /*!< EPWM_T::DACTRGEN: ZTE1 Mask */
#define EPWM_DACTRGEN_ZTE2_Pos (2) /*!< EPWM_T::DACTRGEN: ZTE2 Position */
#define EPWM_DACTRGEN_ZTE2_Msk (0x1ul << EPWM_DACTRGEN_ZTE2_Pos) /*!< EPWM_T::DACTRGEN: ZTE2 Mask */
#define EPWM_DACTRGEN_ZTE3_Pos (3) /*!< EPWM_T::DACTRGEN: ZTE3 Position */
#define EPWM_DACTRGEN_ZTE3_Msk (0x1ul << EPWM_DACTRGEN_ZTE3_Pos) /*!< EPWM_T::DACTRGEN: ZTE3 Mask */
#define EPWM_DACTRGEN_ZTE4_Pos (4) /*!< EPWM_T::DACTRGEN: ZTE4 Position */
#define EPWM_DACTRGEN_ZTE4_Msk (0x1ul << EPWM_DACTRGEN_ZTE4_Pos) /*!< EPWM_T::DACTRGEN: ZTE4 Mask */
#define EPWM_DACTRGEN_ZTE5_Pos (5) /*!< EPWM_T::DACTRGEN: ZTE5 Position */
#define EPWM_DACTRGEN_ZTE5_Msk (0x1ul << EPWM_DACTRGEN_ZTE5_Pos) /*!< EPWM_T::DACTRGEN: ZTE5 Mask */
#define EPWM_DACTRGEN_PTE0_Pos (8) /*!< EPWM_T::DACTRGEN: PTE0 Position */
#define EPWM_DACTRGEN_PTE0_Msk (0x1ul << EPWM_DACTRGEN_PTE0_Pos) /*!< EPWM_T::DACTRGEN: PTE0 Mask */
#define EPWM_DACTRGEN_PTE1_Pos (9) /*!< EPWM_T::DACTRGEN: PTE1 Position */
#define EPWM_DACTRGEN_PTE1_Msk (0x1ul << EPWM_DACTRGEN_PTE1_Pos) /*!< EPWM_T::DACTRGEN: PTE1 Mask */
#define EPWM_DACTRGEN_PTE2_Pos (10) /*!< EPWM_T::DACTRGEN: PTE2 Position */
#define EPWM_DACTRGEN_PTE2_Msk (0x1ul << EPWM_DACTRGEN_PTE2_Pos) /*!< EPWM_T::DACTRGEN: PTE2 Mask */
#define EPWM_DACTRGEN_PTE3_Pos (11) /*!< EPWM_T::DACTRGEN: PTE3 Position */
#define EPWM_DACTRGEN_PTE3_Msk (0x1ul << EPWM_DACTRGEN_PTE3_Pos) /*!< EPWM_T::DACTRGEN: PTE3 Mask */
#define EPWM_DACTRGEN_PTE4_Pos (12) /*!< EPWM_T::DACTRGEN: PTE4 Position */
#define EPWM_DACTRGEN_PTE4_Msk (0x1ul << EPWM_DACTRGEN_PTE4_Pos) /*!< EPWM_T::DACTRGEN: PTE4 Mask */
#define EPWM_DACTRGEN_PTE5_Pos (13) /*!< EPWM_T::DACTRGEN: PTE5 Position */
#define EPWM_DACTRGEN_PTE5_Msk (0x1ul << EPWM_DACTRGEN_PTE5_Pos) /*!< EPWM_T::DACTRGEN: PTE5 Mask */
#define EPWM_DACTRGEN_CUTRGEN0_Pos (16) /*!< EPWM_T::DACTRGEN: CUTRGEN0 Position */
#define EPWM_DACTRGEN_CUTRGEN0_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN0_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN0 Mask */
#define EPWM_DACTRGEN_CUTRGEN1_Pos (17) /*!< EPWM_T::DACTRGEN: CUTRGEN1 Position */
#define EPWM_DACTRGEN_CUTRGEN1_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN1_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN1 Mask */
#define EPWM_DACTRGEN_CUTRGEN2_Pos (18) /*!< EPWM_T::DACTRGEN: CUTRGEN2 Position */
#define EPWM_DACTRGEN_CUTRGEN2_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN2_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN2 Mask */
#define EPWM_DACTRGEN_CUTRGEN3_Pos (19) /*!< EPWM_T::DACTRGEN: CUTRGEN3 Position */
#define EPWM_DACTRGEN_CUTRGEN3_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN3_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN3 Mask */
#define EPWM_DACTRGEN_CUTRGEN4_Pos (20) /*!< EPWM_T::DACTRGEN: CUTRGEN4 Position */
#define EPWM_DACTRGEN_CUTRGEN4_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN4_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN4 Mask */
#define EPWM_DACTRGEN_CUTRGEN5_Pos (21) /*!< EPWM_T::DACTRGEN: CUTRGEN5 Position */
#define EPWM_DACTRGEN_CUTRGEN5_Msk (0x1ul << EPWM_DACTRGEN_CUTRGEN5_Pos) /*!< EPWM_T::DACTRGEN: CUTRGEN5 Mask */
#define EPWM_DACTRGEN_CDTRGEN0_Pos (24) /*!< EPWM_T::DACTRGEN: CDTRGEN0 Position */
#define EPWM_DACTRGEN_CDTRGEN0_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN0_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN0 Mask */
#define EPWM_DACTRGEN_CDTRGEN1_Pos (25) /*!< EPWM_T::DACTRGEN: CDTRGEN1 Position */
#define EPWM_DACTRGEN_CDTRGEN1_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN1_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN1 Mask */
#define EPWM_DACTRGEN_CDTRGEN2_Pos (26) /*!< EPWM_T::DACTRGEN: CDTRGEN2 Position */
#define EPWM_DACTRGEN_CDTRGEN2_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN2_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN2 Mask */
#define EPWM_DACTRGEN_CDTRGEN3_Pos (27) /*!< EPWM_T::DACTRGEN: CDTRGEN3 Position */
#define EPWM_DACTRGEN_CDTRGEN3_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN3_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN3 Mask */
#define EPWM_DACTRGEN_CDTRGEN4_Pos (28) /*!< EPWM_T::DACTRGEN: CDTRGEN4 Position */
#define EPWM_DACTRGEN_CDTRGEN4_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN4_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN4 Mask */
#define EPWM_DACTRGEN_CDTRGEN5_Pos (29) /*!< EPWM_T::DACTRGEN: CDTRGEN5 Position */
#define EPWM_DACTRGEN_CDTRGEN5_Msk (0x1ul << EPWM_DACTRGEN_CDTRGEN5_Pos) /*!< EPWM_T::DACTRGEN: CDTRGEN5 Mask */
#define EPWM_EADCTS0_TRGSEL0_Pos (0) /*!< EPWM_T::EADCTS0: TRGSEL0 Position */
#define EPWM_EADCTS0_TRGSEL0_Msk (0x1ful << EPWM_EADCTS0_TRGSEL0_Pos) /*!< EPWM_T::EADCTS0: TRGSEL0 Mask */
#define EPWM_EADCTS0_TRGEN0_Pos (7) /*!< EPWM_T::EADCTS0: TRGEN0 Position */
#define EPWM_EADCTS0_TRGEN0_Msk (0x1ul << EPWM_EADCTS0_TRGEN0_Pos) /*!< EPWM_T::EADCTS0: TRGEN0 Mask */
#define EPWM_EADCTS0_TRGSEL1_Pos (8) /*!< EPWM_T::EADCTS0: TRGSEL1 Position */
#define EPWM_EADCTS0_TRGSEL1_Msk (0x1ful << EPWM_EADCTS0_TRGSEL1_Pos) /*!< EPWM_T::EADCTS0: TRGSEL1 Mask */
#define EPWM_EADCTS0_TRGEN1_Pos (15) /*!< EPWM_T::EADCTS0: TRGEN1 Position */
#define EPWM_EADCTS0_TRGEN1_Msk (0x1ul << EPWM_EADCTS0_TRGEN1_Pos) /*!< EPWM_T::EADCTS0: TRGEN1 Mask */
#define EPWM_EADCTS0_TRGSEL2_Pos (16) /*!< EPWM_T::EADCTS0: TRGSEL2 Position */
#define EPWM_EADCTS0_TRGSEL2_Msk (0x1ful << EPWM_EADCTS0_TRGSEL2_Pos) /*!< EPWM_T::EADCTS0: TRGSEL2 Mask */
#define EPWM_EADCTS0_TRGEN2_Pos (23) /*!< EPWM_T::EADCTS0: TRGEN2 Position */
#define EPWM_EADCTS0_TRGEN2_Msk (0x1ul << EPWM_EADCTS0_TRGEN2_Pos) /*!< EPWM_T::EADCTS0: TRGEN2 Mask */
#define EPWM_EADCTS0_TRGSEL3_Pos (24) /*!< EPWM_T::EADCTS0: TRGSEL3 Position */
#define EPWM_EADCTS0_TRGSEL3_Msk (0x1ful << EPWM_EADCTS0_TRGSEL3_Pos) /*!< EPWM_T::EADCTS0: TRGSEL3 Mask */
#define EPWM_EADCTS0_TRGEN3_Pos (31) /*!< EPWM_T::EADCTS0: TRGEN3 Position */
#define EPWM_EADCTS0_TRGEN3_Msk (0x1ul << EPWM_EADCTS0_TRGEN3_Pos) /*!< EPWM_T::EADCTS0: TRGEN3 Mask */
#define EPWM_EADCTS1_TRGSEL4_Pos (0) /*!< EPWM_T::EADCTS1: TRGSEL4 Position */
#define EPWM_EADCTS1_TRGSEL4_Msk (0x1ful << EPWM_EADCTS1_TRGSEL4_Pos) /*!< EPWM_T::EADCTS1: TRGSEL4 Mask */
#define EPWM_EADCTS1_TRGEN4_Pos (7) /*!< EPWM_T::EADCTS1: TRGEN4 Position */
#define EPWM_EADCTS1_TRGEN4_Msk (0x1ul << EPWM_EADCTS1_TRGEN4_Pos) /*!< EPWM_T::EADCTS1: TRGEN4 Mask */
#define EPWM_EADCTS1_TRGSEL5_Pos (8) /*!< EPWM_T::EADCTS1: TRGSEL5 Position */
#define EPWM_EADCTS1_TRGSEL5_Msk (0x1ful << EPWM_EADCTS1_TRGSEL5_Pos) /*!< EPWM_T::EADCTS1: TRGSEL5 Mask */
#define EPWM_EADCTS1_TRGEN5_Pos (15) /*!< EPWM_T::EADCTS1: TRGEN5 Position */
#define EPWM_EADCTS1_TRGEN5_Msk (0x1ul << EPWM_EADCTS1_TRGEN5_Pos) /*!< EPWM_T::EADCTS1: TRGEN5 Mask */
#define EPWM_FTCMPDAT0_1_FTCMP_Pos (0) /*!< EPWM_T::FTCMPDAT0_1: FTCMP Position */
#define EPWM_FTCMPDAT0_1_FTCMP_Msk (0xfffful << EPWM_FTCMPDAT0_1_FTCMP_Pos) /*!< EPWM_T::FTCMPDAT0_1: FTCMP Mask */
#define EPWM_FTCMPDAT2_3_FTCMP_Pos (0) /*!< EPWM_T::FTCMPDAT2_3: FTCMP Position */
#define EPWM_FTCMPDAT2_3_FTCMP_Msk (0xfffful << EPWM_FTCMPDAT2_3_FTCMP_Pos) /*!< EPWM_T::FTCMPDAT2_3: FTCMP Mask */
#define EPWM_FTCMPDAT4_5_FTCMP_Pos (0) /*!< EPWM_T::FTCMPDAT4_5: FTCMP Position */
#define EPWM_FTCMPDAT4_5_FTCMP_Msk (0xfffful << EPWM_FTCMPDAT4_5_FTCMP_Pos) /*!< EPWM_T::FTCMPDAT4_5: FTCMP Mask */
#define EPWM_SSCTL_SSEN0_Pos (0) /*!< EPWM_T::SSCTL: SSEN0 Position */
#define EPWM_SSCTL_SSEN0_Msk (0x1ul << EPWM_SSCTL_SSEN0_Pos) /*!< EPWM_T::SSCTL: SSEN0 Mask */
#define EPWM_SSCTL_SSEN1_Pos (1) /*!< EPWM_T::SSCTL: SSEN1 Position */
#define EPWM_SSCTL_SSEN1_Msk (0x1ul << EPWM_SSCTL_SSEN1_Pos) /*!< EPWM_T::SSCTL: SSEN1 Mask */
#define EPWM_SSCTL_SSEN2_Pos (2) /*!< EPWM_T::SSCTL: SSEN2 Position */
#define EPWM_SSCTL_SSEN2_Msk (0x1ul << EPWM_SSCTL_SSEN2_Pos) /*!< EPWM_T::SSCTL: SSEN2 Mask */
#define EPWM_SSCTL_SSEN3_Pos (3) /*!< EPWM_T::SSCTL: SSEN3 Position */
#define EPWM_SSCTL_SSEN3_Msk (0x1ul << EPWM_SSCTL_SSEN3_Pos) /*!< EPWM_T::SSCTL: SSEN3 Mask */
#define EPWM_SSCTL_SSEN4_Pos (4) /*!< EPWM_T::SSCTL: SSEN4 Position */
#define EPWM_SSCTL_SSEN4_Msk (0x1ul << EPWM_SSCTL_SSEN4_Pos) /*!< EPWM_T::SSCTL: SSEN4 Mask */
#define EPWM_SSCTL_SSEN5_Pos (5) /*!< EPWM_T::SSCTL: SSEN5 Position */
#define EPWM_SSCTL_SSEN5_Msk (0x1ul << EPWM_SSCTL_SSEN5_Pos) /*!< EPWM_T::SSCTL: SSEN5 Mask */
#define EPWM_SSCTL_SSRC_Pos (8) /*!< EPWM_T::SSCTL: SSRC Position */
#define EPWM_SSCTL_SSRC_Msk (0x3ul << EPWM_SSCTL_SSRC_Pos) /*!< EPWM_T::SSCTL: SSRC Mask */
#define EPWM_SSTRG_CNTSEN_Pos (0) /*!< EPWM_T::SSTRG: CNTSEN Position */
#define EPWM_SSTRG_CNTSEN_Msk (0x1ul << EPWM_SSTRG_CNTSEN_Pos) /*!< EPWM_T::SSTRG: CNTSEN Mask */
#define EPWM_LEBCTL_LEBEN_Pos (0) /*!< EPWM_T::LEBCTL: LEBEN Position */
#define EPWM_LEBCTL_LEBEN_Msk (0x1ul << EPWM_LEBCTL_LEBEN_Pos) /*!< EPWM_T::LEBCTL: LEBEN Mask */
#define EPWM_LEBCTL_SRCEN0_Pos (8) /*!< EPWM_T::LEBCTL: SRCEN0 Position */
#define EPWM_LEBCTL_SRCEN0_Msk (0x1ul << EPWM_LEBCTL_SRCEN0_Pos) /*!< EPWM_T::LEBCTL: SRCEN0 Mask */
#define EPWM_LEBCTL_SRCEN2_Pos (9) /*!< EPWM_T::LEBCTL: SRCEN2 Position */
#define EPWM_LEBCTL_SRCEN2_Msk (0x1ul << EPWM_LEBCTL_SRCEN2_Pos) /*!< EPWM_T::LEBCTL: SRCEN2 Mask */
#define EPWM_LEBCTL_SRCEN4_Pos (10) /*!< EPWM_T::LEBCTL: SRCEN4 Position */
#define EPWM_LEBCTL_SRCEN4_Msk (0x1ul << EPWM_LEBCTL_SRCEN4_Pos) /*!< EPWM_T::LEBCTL: SRCEN4 Mask */
#define EPWM_LEBCTL_TRGTYPE_Pos (16) /*!< EPWM_T::LEBCTL: TRGTYPE Position */
#define EPWM_LEBCTL_TRGTYPE_Msk (0x3ul << EPWM_LEBCTL_TRGTYPE_Pos) /*!< EPWM_T::LEBCTL: TRGTYPE Mask */
#define EPWM_LEBCNT_LEBCNT_Pos (0) /*!< EPWM_T::LEBCNT: LEBCNT Position */
#define EPWM_LEBCNT_LEBCNT_Msk (0x1fful << EPWM_LEBCNT_LEBCNT_Pos) /*!< EPWM_T::LEBCNT: LEBCNT Mask */
#define EPWM_STATUS_CNTMAXF0_Pos (0) /*!< EPWM_T::STATUS: CNTMAXF0 Position */
#define EPWM_STATUS_CNTMAXF0_Msk (0x1ul << EPWM_STATUS_CNTMAXF0_Pos) /*!< EPWM_T::STATUS: CNTMAXF0 Mask */
#define EPWM_STATUS_CNTMAXF1_Pos (1) /*!< EPWM_T::STATUS: CNTMAXF1 Position */
#define EPWM_STATUS_CNTMAXF1_Msk (0x1ul << EPWM_STATUS_CNTMAXF1_Pos) /*!< EPWM_T::STATUS: CNTMAXF1 Mask */
#define EPWM_STATUS_CNTMAXF2_Pos (2) /*!< EPWM_T::STATUS: CNTMAXF2 Position */
#define EPWM_STATUS_CNTMAXF2_Msk (0x1ul << EPWM_STATUS_CNTMAXF2_Pos) /*!< EPWM_T::STATUS: CNTMAXF2 Mask */
#define EPWM_STATUS_CNTMAXF3_Pos (3) /*!< EPWM_T::STATUS: CNTMAXF3 Position */
#define EPWM_STATUS_CNTMAXF3_Msk (0x1ul << EPWM_STATUS_CNTMAXF3_Pos) /*!< EPWM_T::STATUS: CNTMAXF3 Mask */
#define EPWM_STATUS_CNTMAXF4_Pos (4) /*!< EPWM_T::STATUS: CNTMAXF4 Position */
#define EPWM_STATUS_CNTMAXF4_Msk (0x1ul << EPWM_STATUS_CNTMAXF4_Pos) /*!< EPWM_T::STATUS: CNTMAXF4 Mask */
#define EPWM_STATUS_CNTMAXF5_Pos (5) /*!< EPWM_T::STATUS: CNTMAXF5 Position */
#define EPWM_STATUS_CNTMAXF5_Msk (0x1ul << EPWM_STATUS_CNTMAXF5_Pos) /*!< EPWM_T::STATUS: CNTMAXF5 Mask */
#define EPWM_STATUS_SYNCINF0_Pos (8) /*!< EPWM_T::STATUS: SYNCINF0 Position */
#define EPWM_STATUS_SYNCINF0_Msk (0x1ul << EPWM_STATUS_SYNCINF0_Pos) /*!< EPWM_T::STATUS: SYNCINF0 Mask */
#define EPWM_STATUS_SYNCINF2_Pos (9) /*!< EPWM_T::STATUS: SYNCINF2 Position */
#define EPWM_STATUS_SYNCINF2_Msk (0x1ul << EPWM_STATUS_SYNCINF2_Pos) /*!< EPWM_T::STATUS: SYNCINF2 Mask */
#define EPWM_STATUS_SYNCINF4_Pos (10) /*!< EPWM_T::STATUS: SYNCINF4 Position */
#define EPWM_STATUS_SYNCINF4_Msk (0x1ul << EPWM_STATUS_SYNCINF4_Pos) /*!< EPWM_T::STATUS: SYNCINF4 Mask */
#define EPWM_STATUS_EADCTRGF0_Pos (16) /*!< EPWM_T::STATUS: EADCTRGF0 Position */
#define EPWM_STATUS_EADCTRGF0_Msk (0x1ul << EPWM_STATUS_EADCTRGF0_Pos) /*!< EPWM_T::STATUS: EADCTRGF0 Mask */
#define EPWM_STATUS_EADCTRGF1_Pos (17) /*!< EPWM_T::STATUS: EADCTRGF1 Position */
#define EPWM_STATUS_EADCTRGF1_Msk (0x1ul << EPWM_STATUS_EADCTRGF1_Pos) /*!< EPWM_T::STATUS: EADCTRGF1 Mask */
#define EPWM_STATUS_EADCTRGF2_Pos (18) /*!< EPWM_T::STATUS: EADCTRGF2 Position */
#define EPWM_STATUS_EADCTRGF2_Msk (0x1ul << EPWM_STATUS_EADCTRGF2_Pos) /*!< EPWM_T::STATUS: EADCTRGF2 Mask */
#define EPWM_STATUS_EADCTRGF3_Pos (19) /*!< EPWM_T::STATUS: EADCTRGF3 Position */
#define EPWM_STATUS_EADCTRGF3_Msk (0x1ul << EPWM_STATUS_EADCTRGF3_Pos) /*!< EPWM_T::STATUS: EADCTRGF3 Mask */
#define EPWM_STATUS_EADCTRGF4_Pos (20) /*!< EPWM_T::STATUS: EADCTRGF4 Position */
#define EPWM_STATUS_EADCTRGF4_Msk (0x1ul << EPWM_STATUS_EADCTRGF4_Pos) /*!< EPWM_T::STATUS: EADCTRGF4 Mask */
#define EPWM_STATUS_EADCTRGF5_Pos (21) /*!< EPWM_T::STATUS: EADCTRGF5 Position */
#define EPWM_STATUS_EADCTRGF5_Msk (0x1ul << EPWM_STATUS_EADCTRGF5_Pos) /*!< EPWM_T::STATUS: EADCTRGF5 Mask */
#define EPWM_STATUS_DACTRGF_Pos (24) /*!< EPWM_T::STATUS: DACTRGF Position */
#define EPWM_STATUS_DACTRGF_Msk (0x1ul << EPWM_STATUS_DACTRGF_Pos) /*!< EPWM_T::STATUS: DACTRGF Mask */
#define EPWM_IFA0_IFACNT_Pos (0) /*!< EPWM_T::IFA0: IFACNT Position */
#define EPWM_IFA0_IFACNT_Msk (0xfffful << EPWM_IFA0_IFACNT_Pos) /*!< EPWM_T::IFA0: IFACNT Mask */
#define EPWM_IFA0_STPMOD_Pos (24) /*!< EPWM_T::IFA0: STPMOD Position */
#define EPWM_IFA0_STPMOD_Msk (0x1ul << EPWM_IFA0_STPMOD_Pos) /*!< EPWM_T::IFA0: STPMOD Mask */
#define EPWM_IFA0_IFASEL_Pos (28) /*!< EPWM_T::IFA0: IFASEL Position */
#define EPWM_IFA0_IFASEL_Msk (0x3ul << EPWM_IFA0_IFASEL_Pos) /*!< EPWM_T::IFA0: IFASEL Mask */
#define EPWM_IFA0_IFAEN_Pos (31) /*!< EPWM_T::IFA0: IFAEN Position */
#define EPWM_IFA0_IFAEN_Msk (0x1ul << EPWM_IFA0_IFAEN_Pos) /*!< EPWM_T::IFA0: IFAEN Mask */
#define EPWM_IFA1_IFACNT_Pos (0) /*!< EPWM_T::IFA1: IFACNT Position */
#define EPWM_IFA1_IFACNT_Msk (0xfffful << EPWM_IFA1_IFACNT_Pos) /*!< EPWM_T::IFA1: IFACNT Mask */
#define EPWM_IFA1_STPMOD_Pos (24) /*!< EPWM_T::IFA1: STPMOD Position */
#define EPWM_IFA1_STPMOD_Msk (0x1ul << EPWM_IFA1_STPMOD_Pos) /*!< EPWM_T::IFA1: STPMOD Mask */
#define EPWM_IFA1_IFASEL_Pos (28) /*!< EPWM_T::IFA1: IFASEL Position */
#define EPWM_IFA1_IFASEL_Msk (0x3ul << EPWM_IFA1_IFASEL_Pos) /*!< EPWM_T::IFA1: IFASEL Mask */
#define EPWM_IFA1_IFAEN_Pos (31) /*!< EPWM_T::IFA1: IFAEN Position */
#define EPWM_IFA1_IFAEN_Msk (0x1ul << EPWM_IFA1_IFAEN_Pos) /*!< EPWM_T::IFA1: IFAEN Mask */
#define EPWM_IFA2_IFACNT_Pos (0) /*!< EPWM_T::IFA2: IFACNT Position */
#define EPWM_IFA2_IFACNT_Msk (0xfffful << EPWM_IFA2_IFACNT_Pos) /*!< EPWM_T::IFA2: IFACNT Mask */
#define EPWM_IFA2_STPMOD_Pos (24) /*!< EPWM_T::IFA2: STPMOD Position */
#define EPWM_IFA2_STPMOD_Msk (0x1ul << EPWM_IFA2_STPMOD_Pos) /*!< EPWM_T::IFA2: STPMOD Mask */
#define EPWM_IFA2_IFASEL_Pos (28) /*!< EPWM_T::IFA2: IFASEL Position */
#define EPWM_IFA2_IFASEL_Msk (0x3ul << EPWM_IFA2_IFASEL_Pos) /*!< EPWM_T::IFA2: IFASEL Mask */
#define EPWM_IFA2_IFAEN_Pos (31) /*!< EPWM_T::IFA2: IFAEN Position */
#define EPWM_IFA2_IFAEN_Msk (0x1ul << EPWM_IFA2_IFAEN_Pos) /*!< EPWM_T::IFA2: IFAEN Mask */
#define EPWM_IFA3_IFACNT_Pos (0) /*!< EPWM_T::IFA3: IFACNT Position */
#define EPWM_IFA3_IFACNT_Msk (0xfffful << EPWM_IFA3_IFACNT_Pos) /*!< EPWM_T::IFA3: IFACNT Mask */
#define EPWM_IFA3_STPMOD_Pos (24) /*!< EPWM_T::IFA3: STPMOD Position */
#define EPWM_IFA3_STPMOD_Msk (0x1ul << EPWM_IFA3_STPMOD_Pos) /*!< EPWM_T::IFA3: STPMOD Mask */
#define EPWM_IFA3_IFASEL_Pos (28) /*!< EPWM_T::IFA3: IFASEL Position */
#define EPWM_IFA3_IFASEL_Msk (0x3ul << EPWM_IFA3_IFASEL_Pos) /*!< EPWM_T::IFA3: IFASEL Mask */
#define EPWM_IFA3_IFAEN_Pos (31) /*!< EPWM_T::IFA3: IFAEN Position */
#define EPWM_IFA3_IFAEN_Msk (0x1ul << EPWM_IFA3_IFAEN_Pos) /*!< EPWM_T::IFA3: IFAEN Mask */
#define EPWM_IFA4_IFACNT_Pos (0) /*!< EPWM_T::IFA4: IFACNT Position */
#define EPWM_IFA4_IFACNT_Msk (0xfffful << EPWM_IFA4_IFACNT_Pos) /*!< EPWM_T::IFA4: IFACNT Mask */
#define EPWM_IFA4_STPMOD_Pos (24) /*!< EPWM_T::IFA4: STPMOD Position */
#define EPWM_IFA4_STPMOD_Msk (0x1ul << EPWM_IFA4_STPMOD_Pos) /*!< EPWM_T::IFA4: STPMOD Mask */
#define EPWM_IFA4_IFASEL_Pos (28) /*!< EPWM_T::IFA4: IFASEL Position */
#define EPWM_IFA4_IFASEL_Msk (0x3ul << EPWM_IFA4_IFASEL_Pos) /*!< EPWM_T::IFA4: IFASEL Mask */
#define EPWM_IFA4_IFAEN_Pos (31) /*!< EPWM_T::IFA4: IFAEN Position */
#define EPWM_IFA4_IFAEN_Msk (0x1ul << EPWM_IFA4_IFAEN_Pos) /*!< EPWM_T::IFA4: IFAEN Mask */
#define EPWM_IFA5_IFACNT_Pos (0) /*!< EPWM_T::IFA5: IFACNT Position */
#define EPWM_IFA5_IFACNT_Msk (0xfffful << EPWM_IFA5_IFACNT_Pos) /*!< EPWM_T::IFA5: IFACNT Mask */
#define EPWM_IFA5_STPMOD_Pos (24) /*!< EPWM_T::IFA5: STPMOD Position */
#define EPWM_IFA5_STPMOD_Msk (0x1ul << EPWM_IFA5_STPMOD_Pos) /*!< EPWM_T::IFA5: STPMOD Mask */
#define EPWM_IFA5_IFASEL_Pos (28) /*!< EPWM_T::IFA5: IFASEL Position */
#define EPWM_IFA5_IFASEL_Msk (0x3ul << EPWM_IFA5_IFASEL_Pos) /*!< EPWM_T::IFA5: IFASEL Mask */
#define EPWM_IFA5_IFAEN_Pos (31) /*!< EPWM_T::IFA5: IFAEN Position */
#define EPWM_IFA5_IFAEN_Msk (0x1ul << EPWM_IFA5_IFAEN_Pos) /*!< EPWM_T::IFA5: IFAEN Mask */
#define EPWM_AINTSTS_IFAIF0_Pos (0) /*!< EPWM_T::AINTSTS: IFAIF0 Position */
#define EPWM_AINTSTS_IFAIF0_Msk (0x1ul << EPWM_AINTSTS_IFAIF0_Pos) /*!< EPWM_T::AINTSTS: IFAIF0 Mask */
#define EPWM_AINTSTS_IFAIF1_Pos (1) /*!< EPWM_T::AINTSTS: IFAIF1 Position */
#define EPWM_AINTSTS_IFAIF1_Msk (0x1ul << EPWM_AINTSTS_IFAIF1_Pos) /*!< EPWM_T::AINTSTS: IFAIF1 Mask */
#define EPWM_AINTSTS_IFAIF2_Pos (2) /*!< EPWM_T::AINTSTS: IFAIF2 Position */
#define EPWM_AINTSTS_IFAIF2_Msk (0x1ul << EPWM_AINTSTS_IFAIF2_Pos) /*!< EPWM_T::AINTSTS: IFAIF2 Mask */
#define EPWM_AINTSTS_IFAIF3_Pos (3) /*!< EPWM_T::AINTSTS: IFAIF3 Position */
#define EPWM_AINTSTS_IFAIF3_Msk (0x1ul << EPWM_AINTSTS_IFAIF3_Pos) /*!< EPWM_T::AINTSTS: IFAIF3 Mask */
#define EPWM_AINTSTS_IFAIF4_Pos (4) /*!< EPWM_T::AINTSTS: IFAIF4 Position */
#define EPWM_AINTSTS_IFAIF4_Msk (0x1ul << EPWM_AINTSTS_IFAIF4_Pos) /*!< EPWM_T::AINTSTS: IFAIF4 Mask */
#define EPWM_AINTSTS_IFAIF5_Pos (5) /*!< EPWM_T::AINTSTS: IFAIF5 Position */
#define EPWM_AINTSTS_IFAIF5_Msk (0x1ul << EPWM_AINTSTS_IFAIF5_Pos) /*!< EPWM_T::AINTSTS: IFAIF5 Mask */
#define EPWM_AINTEN_IFAIEN0_Pos (0) /*!< EPWM_T::AINTEN: IFAIEN0 Position */
#define EPWM_AINTEN_IFAIEN0_Msk (0x1ul << EPWM_AINTEN_IFAIEN0_Pos) /*!< EPWM_T::AINTEN: IFAIEN0 Mask */
#define EPWM_AINTEN_IFAIEN1_Pos (1) /*!< EPWM_T::AINTEN: IFAIEN1 Position */
#define EPWM_AINTEN_IFAIEN1_Msk (0x1ul << EPWM_AINTEN_IFAIEN1_Pos) /*!< EPWM_T::AINTEN: IFAIEN1 Mask */
#define EPWM_AINTEN_IFAIEN2_Pos (2) /*!< EPWM_T::AINTEN: IFAIEN2 Position */
#define EPWM_AINTEN_IFAIEN2_Msk (0x1ul << EPWM_AINTEN_IFAIEN2_Pos) /*!< EPWM_T::AINTEN: IFAIEN2 Mask */
#define EPWM_AINTEN_IFAIEN3_Pos (3) /*!< EPWM_T::AINTEN: IFAIEN3 Position */
#define EPWM_AINTEN_IFAIEN3_Msk (0x1ul << EPWM_AINTEN_IFAIEN3_Pos) /*!< EPWM_T::AINTEN: IFAIEN3 Mask */
#define EPWM_AINTEN_IFAIEN4_Pos (4) /*!< EPWM_T::AINTEN: IFAIEN4 Position */
#define EPWM_AINTEN_IFAIEN4_Msk (0x1ul << EPWM_AINTEN_IFAIEN4_Pos) /*!< EPWM_T::AINTEN: IFAIEN4 Mask */
#define EPWM_AINTEN_IFAIEN5_Pos (5) /*!< EPWM_T::AINTEN: IFAIEN5 Position */
#define EPWM_AINTEN_IFAIEN5_Msk (0x1ul << EPWM_AINTEN_IFAIEN5_Pos) /*!< EPWM_T::AINTEN: IFAIEN5 Mask */
#define EPWM_APDMACTL_APDMAEN0_Pos (0) /*!< EPWM_T::APDMACTL: APDMAEN0 Position */
#define EPWM_APDMACTL_APDMAEN0_Msk (0x1ul << EPWM_APDMACTL_APDMAEN0_Pos) /*!< EPWM_T::APDMACTL: APDMAEN0 Mask */
#define EPWM_APDMACTL_APDMAEN1_Pos (1) /*!< EPWM_T::APDMACTL: APDMAEN1 Position */
#define EPWM_APDMACTL_APDMAEN1_Msk (0x1ul << EPWM_APDMACTL_APDMAEN1_Pos) /*!< EPWM_T::APDMACTL: APDMAEN1 Mask */
#define EPWM_APDMACTL_APDMAEN2_Pos (2) /*!< EPWM_T::APDMACTL: APDMAEN2 Position */
#define EPWM_APDMACTL_APDMAEN2_Msk (0x1ul << EPWM_APDMACTL_APDMAEN2_Pos) /*!< EPWM_T::APDMACTL: APDMAEN2 Mask */
#define EPWM_APDMACTL_APDMAEN3_Pos (3) /*!< EPWM_T::APDMACTL: APDMAEN3 Position */
#define EPWM_APDMACTL_APDMAEN3_Msk (0x1ul << EPWM_APDMACTL_APDMAEN3_Pos) /*!< EPWM_T::APDMACTL: APDMAEN3 Mask */
#define EPWM_APDMACTL_APDMAEN4_Pos (4) /*!< EPWM_T::APDMACTL: APDMAEN4 Position */
#define EPWM_APDMACTL_APDMAEN4_Msk (0x1ul << EPWM_APDMACTL_APDMAEN4_Pos) /*!< EPWM_T::APDMACTL: APDMAEN4 Mask */
#define EPWM_APDMACTL_APDMAEN5_Pos (5) /*!< EPWM_T::APDMACTL: APDMAEN5 Position */
#define EPWM_APDMACTL_APDMAEN5_Msk (0x1ul << EPWM_APDMACTL_APDMAEN5_Pos) /*!< EPWM_T::APDMACTL: APDMAEN5 Mask */
#define EPWM_FDEN_FDEN0_Pos (0) /*!< EPWM_T::FDEN: FDEN0 Position */
#define EPWM_FDEN_FDEN0_Msk (0x1ul << EPWM_FDEN_FDEN0_Pos) /*!< EPWM_T::FDEN: FDEN0 Mask */
#define EPWM_FDEN_FDEN1_Pos (1) /*!< EPWM_T::FDEN: FDEN1 Position */
#define EPWM_FDEN_FDEN1_Msk (0x1ul << EPWM_FDEN_FDEN1_Pos) /*!< EPWM_T::FDEN: FDEN1 Mask */
#define EPWM_FDEN_FDEN2_Pos (2) /*!< EPWM_T::FDEN: FDEN2 Position */
#define EPWM_FDEN_FDEN2_Msk (0x1ul << EPWM_FDEN_FDEN2_Pos) /*!< EPWM_T::FDEN: FDEN2 Mask */
#define EPWM_FDEN_FDEN3_Pos (3) /*!< EPWM_T::FDEN: FDEN3 Position */
#define EPWM_FDEN_FDEN3_Msk (0x1ul << EPWM_FDEN_FDEN3_Pos) /*!< EPWM_T::FDEN: FDEN3 Mask */
#define EPWM_FDEN_FDEN4_Pos (4) /*!< EPWM_T::FDEN: FDEN4 Position */
#define EPWM_FDEN_FDEN4_Msk (0x1ul << EPWM_FDEN_FDEN4_Pos) /*!< EPWM_T::FDEN: FDEN4 Mask */
#define EPWM_FDEN_FDEN5_Pos (5) /*!< EPWM_T::FDEN: FDEN5 Position */
#define EPWM_FDEN_FDEN5_Msk (0x1ul << EPWM_FDEN_FDEN5_Pos) /*!< EPWM_T::FDEN: FDEN5 Mask */
#define EPWM_FDEN_FDODIS0_Pos (8) /*!< EPWM_T::FDEN: FDODIS0 Position */
#define EPWM_FDEN_FDODIS0_Msk (0x1ul << EPWM_FDEN_FDODIS0_Pos) /*!< EPWM_T::FDEN: FDODIS0 Mask */
#define EPWM_FDEN_FDODIS1_Pos (9) /*!< EPWM_T::FDEN: FDODIS1 Position */
#define EPWM_FDEN_FDODIS1_Msk (0x1ul << EPWM_FDEN_FDODIS1_Pos) /*!< EPWM_T::FDEN: FDODIS1 Mask */
#define EPWM_FDEN_FDODIS2_Pos (10) /*!< EPWM_T::FDEN: FDODIS2 Position */
#define EPWM_FDEN_FDODIS2_Msk (0x1ul << EPWM_FDEN_FDODIS2_Pos) /*!< EPWM_T::FDEN: FDODIS2 Mask */
#define EPWM_FDEN_FDODIS3_Pos (11) /*!< EPWM_T::FDEN: FDODIS3 Position */
#define EPWM_FDEN_FDODIS3_Msk (0x1ul << EPWM_FDEN_FDODIS3_Pos) /*!< EPWM_T::FDEN: FDODIS3 Mask */
#define EPWM_FDEN_FDODIS4_Pos (12) /*!< EPWM_T::FDEN: FDODIS4 Position */
#define EPWM_FDEN_FDODIS4_Msk (0x1ul << EPWM_FDEN_FDODIS4_Pos) /*!< EPWM_T::FDEN: FDODIS4 Mask */
#define EPWM_FDEN_FDODIS5_Pos (13) /*!< EPWM_T::FDEN: FDODIS5 Position */
#define EPWM_FDEN_FDODIS5_Msk (0x1ul << EPWM_FDEN_FDODIS5_Pos) /*!< EPWM_T::FDEN: FDODIS5 Mask */
#define EPWM_FDEN_FDCKS0_Pos (16) /*!< EPWM_T::FDEN: FDCKS0 Position */
#define EPWM_FDEN_FDCKS0_Msk (0x1ul << EPWM_FDEN_FDCKS0_Pos) /*!< EPWM_T::FDEN: FDCKS0 Mask */
#define EPWM_FDEN_FDCKS1_Pos (17) /*!< EPWM_T::FDEN: FDCKS1 Position */
#define EPWM_FDEN_FDCKS1_Msk (0x1ul << EPWM_FDEN_FDCKS1_Pos) /*!< EPWM_T::FDEN: FDCKS1 Mask */
#define EPWM_FDEN_FDCKS2_Pos (18) /*!< EPWM_T::FDEN: FDCKS2 Position */
#define EPWM_FDEN_FDCKS2_Msk (0x1ul << EPWM_FDEN_FDCKS2_Pos) /*!< EPWM_T::FDEN: FDCKS2 Mask */
#define EPWM_FDEN_FDCKS3_Pos (19) /*!< EPWM_T::FDEN: FDCKS3 Position */
#define EPWM_FDEN_FDCKS3_Msk (0x1ul << EPWM_FDEN_FDCKS3_Pos) /*!< EPWM_T::FDEN: FDCKS3 Mask */
#define EPWM_FDEN_FDCKS4_Pos (20) /*!< EPWM_T::FDEN: FDCKS4 Position */
#define EPWM_FDEN_FDCKS4_Msk (0x1ul << EPWM_FDEN_FDCKS4_Pos) /*!< EPWM_T::FDEN: FDCKS4 Mask */
#define EPWM_FDEN_FDCKS5_Pos (21) /*!< EPWM_T::FDEN: FDCKS5 Position */
#define EPWM_FDEN_FDCKS5_Msk (0x1ul << EPWM_FDEN_FDCKS5_Pos) /*!< EPWM_T::FDEN: FDCKS5 Mask */
#define EPWM_FDCTL0_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL0: TRMSKCNT Position */
#define EPWM_FDCTL0_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL0_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL0: TRMSKCNT Mask */
#define EPWM_FDCTL0_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL0: FDMSKEN Position */
#define EPWM_FDCTL0_FDMSKEN_Msk (0x1ul << EPWM_FDCTL0_FDMSKEN_Pos) /*!< EPWM_T::FDCTL0: FDMSKEN Mask */
#define EPWM_FDCTL0_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL0: DGSMPCYC Position */
#define EPWM_FDCTL0_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL0_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL0: DGSMPCYC Mask */
#define EPWM_FDCTL0_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL0: FDCKSEL Position */
#define EPWM_FDCTL0_FDCKSEL_Msk (0x3ul << EPWM_FDCTL0_FDCKSEL_Pos) /*!< EPWM_T::FDCTL0: FDCKSEL Mask */
#define EPWM_FDCTL0_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL0: FDDGEN Position */
#define EPWM_FDCTL0_FDDGEN_Msk (0x1ul << EPWM_FDCTL0_FDDGEN_Pos) /*!< EPWM_T::FDCTL0: FDDGEN Mask */
#define EPWM_FDCTL1_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL1: TRMSKCNT Position */
#define EPWM_FDCTL1_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL1_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL1: TRMSKCNT Mask */
#define EPWM_FDCTL1_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL1: FDMSKEN Position */
#define EPWM_FDCTL1_FDMSKEN_Msk (0x1ul << EPWM_FDCTL1_FDMSKEN_Pos) /*!< EPWM_T::FDCTL1: FDMSKEN Mask */
#define EPWM_FDCTL1_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL1: DGSMPCYC Position */
#define EPWM_FDCTL1_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL1_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL1: DGSMPCYC Mask */
#define EPWM_FDCTL1_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL1: FDCKSEL Position */
#define EPWM_FDCTL1_FDCKSEL_Msk (0x3ul << EPWM_FDCTL1_FDCKSEL_Pos) /*!< EPWM_T::FDCTL1: FDCKSEL Mask */
#define EPWM_FDCTL1_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL1: FDDGEN Position */
#define EPWM_FDCTL1_FDDGEN_Msk (0x1ul << EPWM_FDCTL1_FDDGEN_Pos) /*!< EPWM_T::FDCTL1: FDDGEN Mask */
#define EPWM_FDCTL2_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL2: TRMSKCNT Position */
#define EPWM_FDCTL2_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL2_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL2: TRMSKCNT Mask */
#define EPWM_FDCTL2_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL2: FDMSKEN Position */
#define EPWM_FDCTL2_FDMSKEN_Msk (0x1ul << EPWM_FDCTL2_FDMSKEN_Pos) /*!< EPWM_T::FDCTL2: FDMSKEN Mask */
#define EPWM_FDCTL2_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL2: DGSMPCYC Position */
#define EPWM_FDCTL2_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL2_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL2: DGSMPCYC Mask */
#define EPWM_FDCTL2_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL2: FDCKSEL Position */
#define EPWM_FDCTL2_FDCKSEL_Msk (0x3ul << EPWM_FDCTL2_FDCKSEL_Pos) /*!< EPWM_T::FDCTL2: FDCKSEL Mask */
#define EPWM_FDCTL2_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL2: FDDGEN Position */
#define EPWM_FDCTL2_FDDGEN_Msk (0x1ul << EPWM_FDCTL2_FDDGEN_Pos) /*!< EPWM_T::FDCTL2: FDDGEN Mask */
#define EPWM_FDCTL3_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL3: TRMSKCNT Position */
#define EPWM_FDCTL3_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL3_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL3: TRMSKCNT Mask */
#define EPWM_FDCTL3_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL3: FDMSKEN Position */
#define EPWM_FDCTL3_FDMSKEN_Msk (0x1ul << EPWM_FDCTL3_FDMSKEN_Pos) /*!< EPWM_T::FDCTL3: FDMSKEN Mask */
#define EPWM_FDCTL3_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL3: DGSMPCYC Position */
#define EPWM_FDCTL3_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL3_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL3: DGSMPCYC Mask */
#define EPWM_FDCTL3_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL3: FDCKSEL Position */
#define EPWM_FDCTL3_FDCKSEL_Msk (0x3ul << EPWM_FDCTL3_FDCKSEL_Pos) /*!< EPWM_T::FDCTL3: FDCKSEL Mask */
#define EPWM_FDCTL3_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL3: FDDGEN Position */
#define EPWM_FDCTL3_FDDGEN_Msk (0x1ul << EPWM_FDCTL3_FDDGEN_Pos) /*!< EPWM_T::FDCTL3: FDDGEN Mask */
#define EPWM_FDCTL4_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL4: TRMSKCNT Position */
#define EPWM_FDCTL4_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL4_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL4: TRMSKCNT Mask */
#define EPWM_FDCTL4_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL4: FDMSKEN Position */
#define EPWM_FDCTL4_FDMSKEN_Msk (0x1ul << EPWM_FDCTL4_FDMSKEN_Pos) /*!< EPWM_T::FDCTL4: FDMSKEN Mask */
#define EPWM_FDCTL4_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL4: DGSMPCYC Position */
#define EPWM_FDCTL4_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL4_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL4: DGSMPCYC Mask */
#define EPWM_FDCTL4_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL4: FDCKSEL Position */
#define EPWM_FDCTL4_FDCKSEL_Msk (0x3ul << EPWM_FDCTL4_FDCKSEL_Pos) /*!< EPWM_T::FDCTL4: FDCKSEL Mask */
#define EPWM_FDCTL4_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL4: FDDGEN Position */
#define EPWM_FDCTL4_FDDGEN_Msk (0x1ul << EPWM_FDCTL4_FDDGEN_Pos) /*!< EPWM_T::FDCTL4: FDDGEN Mask */
#define EPWM_FDCTL5_TRMSKCNT_Pos (0) /*!< EPWM_T::FDCTL5: TRMSKCNT Position */
#define EPWM_FDCTL5_TRMSKCNT_Msk (0x7ful << EPWM_FDCTL5_TRMSKCNT_Pos) /*!< EPWM_T::FDCTL5: TRMSKCNT Mask */
#define EPWM_FDCTL5_FDMSKEN_Pos (15) /*!< EPWM_T::FDCTL5: FDMSKEN Position */
#define EPWM_FDCTL5_FDMSKEN_Msk (0x1ul << EPWM_FDCTL5_FDMSKEN_Pos) /*!< EPWM_T::FDCTL5: FDMSKEN Mask */
#define EPWM_FDCTL5_DGSMPCYC_Pos (16) /*!< EPWM_T::FDCTL5: DGSMPCYC Position */
#define EPWM_FDCTL5_DGSMPCYC_Msk (0x7ul << EPWM_FDCTL5_DGSMPCYC_Pos) /*!< EPWM_T::FDCTL5: DGSMPCYC Mask */
#define EPWM_FDCTL5_FDCKSEL_Pos (28) /*!< EPWM_T::FDCTL5: FDCKSEL Position */
#define EPWM_FDCTL5_FDCKSEL_Msk (0x3ul << EPWM_FDCTL5_FDCKSEL_Pos) /*!< EPWM_T::FDCTL5: FDCKSEL Mask */
#define EPWM_FDCTL5_FDDGEN_Pos (31) /*!< EPWM_T::FDCTL5: FDDGEN Position */
#define EPWM_FDCTL5_FDDGEN_Msk (0x1ul << EPWM_FDCTL5_FDDGEN_Pos) /*!< EPWM_T::FDCTL5: FDDGEN Mask */
#define EPWM_FDIEN_FDIEN0_Pos (0) /*!< EPWM_T::FDIEN: FDIEN0 Position */
#define EPWM_FDIEN_FDIEN0_Msk (0x1ul << EPWM_FDIEN_FDIEN0_Pos) /*!< EPWM_T::FDIEN: FDIEN0 Mask */
#define EPWM_FDIEN_FDIEN1_Pos (1) /*!< EPWM_T::FDIEN: FDIEN1 Position */
#define EPWM_FDIEN_FDIEN1_Msk (0x1ul << EPWM_FDIEN_FDIEN1_Pos) /*!< EPWM_T::FDIEN: FDIEN1 Mask */
#define EPWM_FDIEN_FDIEN2_Pos (2) /*!< EPWM_T::FDIEN: FDIEN2 Position */
#define EPWM_FDIEN_FDIEN2_Msk (0x1ul << EPWM_FDIEN_FDIEN2_Pos) /*!< EPWM_T::FDIEN: FDIEN2 Mask */
#define EPWM_FDIEN_FDIEN3_Pos (3) /*!< EPWM_T::FDIEN: FDIEN3 Position */
#define EPWM_FDIEN_FDIEN3_Msk (0x1ul << EPWM_FDIEN_FDIEN3_Pos) /*!< EPWM_T::FDIEN: FDIEN3 Mask */
#define EPWM_FDIEN_FDIEN4_Pos (4) /*!< EPWM_T::FDIEN: FDIEN4 Position */
#define EPWM_FDIEN_FDIEN4_Msk (0x1ul << EPWM_FDIEN_FDIEN4_Pos) /*!< EPWM_T::FDIEN: FDIEN4 Mask */
#define EPWM_FDIEN_FDIEN5_Pos (5) /*!< EPWM_T::FDIEN: FDIEN5 Position */
#define EPWM_FDIEN_FDIEN5_Msk (0x1ul << EPWM_FDIEN_FDIEN5_Pos) /*!< EPWM_T::FDIEN: FDIEN5 Mask */
#define EPWM_FDSTS_FDIF0_Pos (0) /*!< EPWM_T::FDSTS: FDIF0 Position */
#define EPWM_FDSTS_FDIF0_Msk (0x1ul << EPWM_FDSTS_FDIF0_Pos) /*!< EPWM_T::FDSTS: FDIF0 Mask */
#define EPWM_FDSTS_FDIF1_Pos (1) /*!< EPWM_T::FDSTS: FDIF1 Position */
#define EPWM_FDSTS_FDIF1_Msk (0x1ul << EPWM_FDSTS_FDIF1_Pos) /*!< EPWM_T::FDSTS: FDIF1 Mask */
#define EPWM_FDSTS_FDIF2_Pos (2) /*!< EPWM_T::FDSTS: FDIF2 Position */
#define EPWM_FDSTS_FDIF2_Msk (0x1ul << EPWM_FDSTS_FDIF2_Pos) /*!< EPWM_T::FDSTS: FDIF2 Mask */
#define EPWM_FDSTS_FDIF3_Pos (3) /*!< EPWM_T::FDSTS: FDIF3 Position */
#define EPWM_FDSTS_FDIF3_Msk (0x1ul << EPWM_FDSTS_FDIF3_Pos) /*!< EPWM_T::FDSTS: FDIF3 Mask */
#define EPWM_FDSTS_FDIF4_Pos (4) /*!< EPWM_T::FDSTS: FDIF4 Position */
#define EPWM_FDSTS_FDIF4_Msk (0x1ul << EPWM_FDSTS_FDIF4_Pos) /*!< EPWM_T::FDSTS: FDIF4 Mask */
#define EPWM_FDSTS_FDIF5_Pos (5) /*!< EPWM_T::FDSTS: FDIF5 Position */
#define EPWM_FDSTS_FDIF5_Msk (0x1ul << EPWM_FDSTS_FDIF5_Pos) /*!< EPWM_T::FDSTS: FDIF5 Mask */
#define EPWM_EADCPSCCTL_PSCEN0_Pos (0) /*!< EPWM_T::EADCPSCCTL: PSCEN0 Position */
#define EPWM_EADCPSCCTL_PSCEN0_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN0_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN0 Mask */
#define EPWM_EADCPSCCTL_PSCEN1_Pos (1) /*!< EPWM_T::EADCPSCCTL: PSCEN1 Position */
#define EPWM_EADCPSCCTL_PSCEN1_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN1_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN1 Mask */
#define EPWM_EADCPSCCTL_PSCEN2_Pos (2) /*!< EPWM_T::EADCPSCCTL: PSCEN2 Position */
#define EPWM_EADCPSCCTL_PSCEN2_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN2_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN2 Mask */
#define EPWM_EADCPSCCTL_PSCEN3_Pos (3) /*!< EPWM_T::EADCPSCCTL: PSCEN3 Position */
#define EPWM_EADCPSCCTL_PSCEN3_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN3_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN3 Mask */
#define EPWM_EADCPSCCTL_PSCEN4_Pos (4) /*!< EPWM_T::EADCPSCCTL: PSCEN4 Position */
#define EPWM_EADCPSCCTL_PSCEN4_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN4_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN4 Mask */
#define EPWM_EADCPSCCTL_PSCEN5_Pos (5) /*!< EPWM_T::EADCPSCCTL: PSCEN5 Position */
#define EPWM_EADCPSCCTL_PSCEN5_Msk (0x1ul << EPWM_EADCPSCCTL_PSCEN5_Pos) /*!< EPWM_T::EADCPSCCTL: PSCEN5 Mask */
#define EPWM_EADCPSC0_EADCPSC0_Pos (0) /*!< EPWM_T::EADCPSC0: EADCPSC0 Position */
#define EPWM_EADCPSC0_EADCPSC0_Msk (0xful << EPWM_EADCPSC0_EADCPSC0_Pos) /*!< EPWM_T::EADCPSC0: EADCPSC0 Mask */
#define EPWM_EADCPSC0_EADCPSC1_Pos (8) /*!< EPWM_T::EADCPSC0: EADCPSC1 Position */
#define EPWM_EADCPSC0_EADCPSC1_Msk (0xful << EPWM_EADCPSC0_EADCPSC1_Pos) /*!< EPWM_T::EADCPSC0: EADCPSC1 Mask */
#define EPWM_EADCPSC0_EADCPSC2_Pos (16) /*!< EPWM_T::EADCPSC0: EADCPSC2 Position */
#define EPWM_EADCPSC0_EADCPSC2_Msk (0xful << EPWM_EADCPSC0_EADCPSC2_Pos) /*!< EPWM_T::EADCPSC0: EADCPSC2 Mask */
#define EPWM_EADCPSC0_EADCPSC3_Pos (24) /*!< EPWM_T::EADCPSC0: EADCPSC3 Position */
#define EPWM_EADCPSC0_EADCPSC3_Msk (0xful << EPWM_EADCPSC0_EADCPSC3_Pos) /*!< EPWM_T::EADCPSC0: EADCPSC3 Mask */
#define EPWM_EADCPSC1_EADCPSC4_Pos (0) /*!< EPWM_T::EADCPSC1: EADCPSC4 Position */
#define EPWM_EADCPSC1_EADCPSC4_Msk (0xful << EPWM_EADCPSC1_EADCPSC4_Pos) /*!< EPWM_T::EADCPSC1: EADCPSC4 Mask */
#define EPWM_EADCPSC1_EADCPSC5_Pos (8) /*!< EPWM_T::EADCPSC1: EADCPSC5 Position */
#define EPWM_EADCPSC1_EADCPSC5_Msk (0xful << EPWM_EADCPSC1_EADCPSC5_Pos) /*!< EPWM_T::EADCPSC1: EADCPSC5 Mask */
#define EPWM_EADCPSCNT0_PSCNT0_Pos (0) /*!< EPWM_T::EADCPSCNT0: PSCNT0 Position */
#define EPWM_EADCPSCNT0_PSCNT0_Msk (0xful << EPWM_EADCPSCNT0_PSCNT0_Pos) /*!< EPWM_T::EADCPSCNT0: PSCNT0 Mask */
#define EPWM_EADCPSCNT0_PSCNT1_Pos (8) /*!< EPWM_T::EADCPSCNT0: PSCNT1 Position */
#define EPWM_EADCPSCNT0_PSCNT1_Msk (0xful << EPWM_EADCPSCNT0_PSCNT1_Pos) /*!< EPWM_T::EADCPSCNT0: PSCNT1 Mask */
#define EPWM_EADCPSCNT0_PSCNT2_Pos (16) /*!< EPWM_T::EADCPSCNT0: PSCNT2 Position */
#define EPWM_EADCPSCNT0_PSCNT2_Msk (0xful << EPWM_EADCPSCNT0_PSCNT2_Pos) /*!< EPWM_T::EADCPSCNT0: PSCNT2 Mask */
#define EPWM_EADCPSCNT0_PSCNT3_Pos (24) /*!< EPWM_T::EADCPSCNT0: PSCNT3 Position */
#define EPWM_EADCPSCNT0_PSCNT3_Msk (0xful << EPWM_EADCPSCNT0_PSCNT3_Pos) /*!< EPWM_T::EADCPSCNT0: PSCNT3 Mask */
#define EPWM_EADCPSCNT1_PSCNT4_Pos (0) /*!< EPWM_T::EADCPSCNT1: PSCNT4 Position */
#define EPWM_EADCPSCNT1_PSCNT4_Msk (0xful << EPWM_EADCPSCNT1_PSCNT4_Pos) /*!< EPWM_T::EADCPSCNT1: PSCNT4 Mask */
#define EPWM_EADCPSCNT1_PSCNT5_Pos (8) /*!< EPWM_T::EADCPSCNT1: PSCNT5 Position */
#define EPWM_EADCPSCNT1_PSCNT5_Msk (0xful << EPWM_EADCPSCNT1_PSCNT5_Pos) /*!< EPWM_T::EADCPSCNT1: PSCNT5 Mask */
#define EPWM_CAPINEN_CAPINEN0_Pos (0) /*!< EPWM_T::CAPINEN: CAPINEN0 Position */
#define EPWM_CAPINEN_CAPINEN0_Msk (0x1ul << EPWM_CAPINEN_CAPINEN0_Pos) /*!< EPWM_T::CAPINEN: CAPINEN0 Mask */
#define EPWM_CAPINEN_CAPINEN1_Pos (1) /*!< EPWM_T::CAPINEN: CAPINEN1 Position */
#define EPWM_CAPINEN_CAPINEN1_Msk (0x1ul << EPWM_CAPINEN_CAPINEN1_Pos) /*!< EPWM_T::CAPINEN: CAPINEN1 Mask */
#define EPWM_CAPINEN_CAPINEN2_Pos (2) /*!< EPWM_T::CAPINEN: CAPINEN2 Position */
#define EPWM_CAPINEN_CAPINEN2_Msk (0x1ul << EPWM_CAPINEN_CAPINEN2_Pos) /*!< EPWM_T::CAPINEN: CAPINEN2 Mask */
#define EPWM_CAPINEN_CAPINEN3_Pos (3) /*!< EPWM_T::CAPINEN: CAPINEN3 Position */
#define EPWM_CAPINEN_CAPINEN3_Msk (0x1ul << EPWM_CAPINEN_CAPINEN3_Pos) /*!< EPWM_T::CAPINEN: CAPINEN3 Mask */
#define EPWM_CAPINEN_CAPINEN4_Pos (4) /*!< EPWM_T::CAPINEN: CAPINEN4 Position */
#define EPWM_CAPINEN_CAPINEN4_Msk (0x1ul << EPWM_CAPINEN_CAPINEN4_Pos) /*!< EPWM_T::CAPINEN: CAPINEN4 Mask */
#define EPWM_CAPINEN_CAPINEN5_Pos (5) /*!< EPWM_T::CAPINEN: CAPINEN5 Position */
#define EPWM_CAPINEN_CAPINEN5_Msk (0x1ul << EPWM_CAPINEN_CAPINEN5_Pos) /*!< EPWM_T::CAPINEN: CAPINEN5 Mask */
#define EPWM_CAPCTL_CAPEN0_Pos (0) /*!< EPWM_T::CAPCTL: CAPEN0 Position */
#define EPWM_CAPCTL_CAPEN0_Msk (0x1ul << EPWM_CAPCTL_CAPEN0_Pos) /*!< EPWM_T::CAPCTL: CAPEN0 Mask */
#define EPWM_CAPCTL_CAPEN1_Pos (1) /*!< EPWM_T::CAPCTL: CAPEN1 Position */
#define EPWM_CAPCTL_CAPEN1_Msk (0x1ul << EPWM_CAPCTL_CAPEN1_Pos) /*!< EPWM_T::CAPCTL: CAPEN1 Mask */
#define EPWM_CAPCTL_CAPEN2_Pos (2) /*!< EPWM_T::CAPCTL: CAPEN2 Position */
#define EPWM_CAPCTL_CAPEN2_Msk (0x1ul << EPWM_CAPCTL_CAPEN2_Pos) /*!< EPWM_T::CAPCTL: CAPEN2 Mask */
#define EPWM_CAPCTL_CAPEN3_Pos (3) /*!< EPWM_T::CAPCTL: CAPEN3 Position */
#define EPWM_CAPCTL_CAPEN3_Msk (0x1ul << EPWM_CAPCTL_CAPEN3_Pos) /*!< EPWM_T::CAPCTL: CAPEN3 Mask */
#define EPWM_CAPCTL_CAPEN4_Pos (4) /*!< EPWM_T::CAPCTL: CAPEN4 Position */
#define EPWM_CAPCTL_CAPEN4_Msk (0x1ul << EPWM_CAPCTL_CAPEN4_Pos) /*!< EPWM_T::CAPCTL: CAPEN4 Mask */
#define EPWM_CAPCTL_CAPEN5_Pos (5) /*!< EPWM_T::CAPCTL: CAPEN5 Position */
#define EPWM_CAPCTL_CAPEN5_Msk (0x1ul << EPWM_CAPCTL_CAPEN5_Pos) /*!< EPWM_T::CAPCTL: CAPEN5 Mask */
#define EPWM_CAPCTL_CAPINV0_Pos (8) /*!< EPWM_T::CAPCTL: CAPINV0 Position */
#define EPWM_CAPCTL_CAPINV0_Msk (0x1ul << EPWM_CAPCTL_CAPINV0_Pos) /*!< EPWM_T::CAPCTL: CAPINV0 Mask */
#define EPWM_CAPCTL_CAPINV1_Pos (9) /*!< EPWM_T::CAPCTL: CAPINV1 Position */
#define EPWM_CAPCTL_CAPINV1_Msk (0x1ul << EPWM_CAPCTL_CAPINV1_Pos) /*!< EPWM_T::CAPCTL: CAPINV1 Mask */
#define EPWM_CAPCTL_CAPINV2_Pos (10) /*!< EPWM_T::CAPCTL: CAPINV2 Position */
#define EPWM_CAPCTL_CAPINV2_Msk (0x1ul << EPWM_CAPCTL_CAPINV2_Pos) /*!< EPWM_T::CAPCTL: CAPINV2 Mask */
#define EPWM_CAPCTL_CAPINV3_Pos (11) /*!< EPWM_T::CAPCTL: CAPINV3 Position */
#define EPWM_CAPCTL_CAPINV3_Msk (0x1ul << EPWM_CAPCTL_CAPINV3_Pos) /*!< EPWM_T::CAPCTL: CAPINV3 Mask */
#define EPWM_CAPCTL_CAPINV4_Pos (12) /*!< EPWM_T::CAPCTL: CAPINV4 Position */
#define EPWM_CAPCTL_CAPINV4_Msk (0x1ul << EPWM_CAPCTL_CAPINV4_Pos) /*!< EPWM_T::CAPCTL: CAPINV4 Mask */
#define EPWM_CAPCTL_CAPINV5_Pos (13) /*!< EPWM_T::CAPCTL: CAPINV5 Position */
#define EPWM_CAPCTL_CAPINV5_Msk (0x1ul << EPWM_CAPCTL_CAPINV5_Pos) /*!< EPWM_T::CAPCTL: CAPINV5 Mask */
#define EPWM_CAPCTL_RCRLDEN0_Pos (16) /*!< EPWM_T::CAPCTL: RCRLDEN0 Position */
#define EPWM_CAPCTL_RCRLDEN0_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN0_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN0 Mask */
#define EPWM_CAPCTL_RCRLDEN1_Pos (17) /*!< EPWM_T::CAPCTL: RCRLDEN1 Position */
#define EPWM_CAPCTL_RCRLDEN1_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN1_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN1 Mask */
#define EPWM_CAPCTL_RCRLDEN2_Pos (18) /*!< EPWM_T::CAPCTL: RCRLDEN2 Position */
#define EPWM_CAPCTL_RCRLDEN2_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN2_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN2 Mask */
#define EPWM_CAPCTL_RCRLDEN3_Pos (19) /*!< EPWM_T::CAPCTL: RCRLDEN3 Position */
#define EPWM_CAPCTL_RCRLDEN3_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN3_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN3 Mask */
#define EPWM_CAPCTL_RCRLDEN4_Pos (20) /*!< EPWM_T::CAPCTL: RCRLDEN4 Position */
#define EPWM_CAPCTL_RCRLDEN4_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN4_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN4 Mask */
#define EPWM_CAPCTL_RCRLDEN5_Pos (21) /*!< EPWM_T::CAPCTL: RCRLDEN5 Position */
#define EPWM_CAPCTL_RCRLDEN5_Msk (0x1ul << EPWM_CAPCTL_RCRLDEN5_Pos) /*!< EPWM_T::CAPCTL: RCRLDEN5 Mask */
#define EPWM_CAPCTL_FCRLDEN0_Pos (24) /*!< EPWM_T::CAPCTL: FCRLDEN0 Position */
#define EPWM_CAPCTL_FCRLDEN0_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN0_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN0 Mask */
#define EPWM_CAPCTL_FCRLDEN1_Pos (25) /*!< EPWM_T::CAPCTL: FCRLDEN1 Position */
#define EPWM_CAPCTL_FCRLDEN1_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN1_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN1 Mask */
#define EPWM_CAPCTL_FCRLDEN2_Pos (26) /*!< EPWM_T::CAPCTL: FCRLDEN2 Position */
#define EPWM_CAPCTL_FCRLDEN2_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN2_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN2 Mask */
#define EPWM_CAPCTL_FCRLDEN3_Pos (27) /*!< EPWM_T::CAPCTL: FCRLDEN3 Position */
#define EPWM_CAPCTL_FCRLDEN3_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN3_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN3 Mask */
#define EPWM_CAPCTL_FCRLDEN4_Pos (28) /*!< EPWM_T::CAPCTL: FCRLDEN4 Position */
#define EPWM_CAPCTL_FCRLDEN4_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN4_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN4 Mask */
#define EPWM_CAPCTL_FCRLDEN5_Pos (29) /*!< EPWM_T::CAPCTL: FCRLDEN5 Position */
#define EPWM_CAPCTL_FCRLDEN5_Msk (0x1ul << EPWM_CAPCTL_FCRLDEN5_Pos) /*!< EPWM_T::CAPCTL: FCRLDEN5 Mask */
#define EPWM_CAPSTS_CRLIFOV0_Pos (0) /*!< EPWM_T::CAPSTS: CRLIFOV0 Position */
#define EPWM_CAPSTS_CRLIFOV0_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV0_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV0 Mask */
#define EPWM_CAPSTS_CRLIFOV1_Pos (1) /*!< EPWM_T::CAPSTS: CRLIFOV1 Position */
#define EPWM_CAPSTS_CRLIFOV1_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV1_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV1 Mask */
#define EPWM_CAPSTS_CRLIFOV2_Pos (2) /*!< EPWM_T::CAPSTS: CRLIFOV2 Position */
#define EPWM_CAPSTS_CRLIFOV2_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV2_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV2 Mask */
#define EPWM_CAPSTS_CRLIFOV3_Pos (3) /*!< EPWM_T::CAPSTS: CRLIFOV3 Position */
#define EPWM_CAPSTS_CRLIFOV3_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV3_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV3 Mask */
#define EPWM_CAPSTS_CRLIFOV4_Pos (4) /*!< EPWM_T::CAPSTS: CRLIFOV4 Position */
#define EPWM_CAPSTS_CRLIFOV4_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV4_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV4 Mask */
#define EPWM_CAPSTS_CRLIFOV5_Pos (5) /*!< EPWM_T::CAPSTS: CRLIFOV5 Position */
#define EPWM_CAPSTS_CRLIFOV5_Msk (0x1ul << EPWM_CAPSTS_CRLIFOV5_Pos) /*!< EPWM_T::CAPSTS: CRLIFOV5 Mask */
#define EPWM_CAPSTS_CFLIFOV0_Pos (8) /*!< EPWM_T::CAPSTS: CFLIFOV0 Position */
#define EPWM_CAPSTS_CFLIFOV0_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV0_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV0 Mask */
#define EPWM_CAPSTS_CFLIFOV1_Pos (9) /*!< EPWM_T::CAPSTS: CFLIFOV1 Position */
#define EPWM_CAPSTS_CFLIFOV1_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV1_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV1 Mask */
#define EPWM_CAPSTS_CFLIFOV2_Pos (10) /*!< EPWM_T::CAPSTS: CFLIFOV2 Position */
#define EPWM_CAPSTS_CFLIFOV2_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV2_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV2 Mask */
#define EPWM_CAPSTS_CFLIFOV3_Pos (11) /*!< EPWM_T::CAPSTS: CFLIFOV3 Position */
#define EPWM_CAPSTS_CFLIFOV3_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV3_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV3 Mask */
#define EPWM_CAPSTS_CFLIFOV4_Pos (12) /*!< EPWM_T::CAPSTS: CFLIFOV4 Position */
#define EPWM_CAPSTS_CFLIFOV4_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV4_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV4 Mask */
#define EPWM_CAPSTS_CFLIFOV5_Pos (13) /*!< EPWM_T::CAPSTS: CFLIFOV5 Position */
#define EPWM_CAPSTS_CFLIFOV5_Msk (0x1ul << EPWM_CAPSTS_CFLIFOV5_Pos) /*!< EPWM_T::CAPSTS: CFLIFOV5 Mask */
#define EPWM_RCAPDAT0_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT0: RCAPDAT Position */
#define EPWM_RCAPDAT0_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT0_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT0: RCAPDAT Mask */
#define EPWM_FCAPDAT0_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT0: FCAPDAT Position */
#define EPWM_FCAPDAT0_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT0_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT0: FCAPDAT Mask */
#define EPWM_RCAPDAT1_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT1: RCAPDAT Position */
#define EPWM_RCAPDAT1_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT1_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT1: RCAPDAT Mask */
#define EPWM_FCAPDAT1_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT1: FCAPDAT Position */
#define EPWM_FCAPDAT1_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT1_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT1: FCAPDAT Mask */
#define EPWM_RCAPDAT2_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT2: RCAPDAT Position */
#define EPWM_RCAPDAT2_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT2_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT2: RCAPDAT Mask */
#define EPWM_FCAPDAT2_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT2: FCAPDAT Position */
#define EPWM_FCAPDAT2_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT2_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT2: FCAPDAT Mask */
#define EPWM_RCAPDAT3_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT3: RCAPDAT Position */
#define EPWM_RCAPDAT3_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT3_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT3: RCAPDAT Mask */
#define EPWM_FCAPDAT3_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT3: FCAPDAT Position */
#define EPWM_FCAPDAT3_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT3_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT3: FCAPDAT Mask */
#define EPWM_RCAPDAT4_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT4: RCAPDAT Position */
#define EPWM_RCAPDAT4_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT4_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT4: RCAPDAT Mask */
#define EPWM_FCAPDAT4_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT4: FCAPDAT Position */
#define EPWM_FCAPDAT4_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT4_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT4: FCAPDAT Mask */
#define EPWM_RCAPDAT5_RCAPDAT_Pos (0) /*!< EPWM_T::RCAPDAT5: RCAPDAT Position */
#define EPWM_RCAPDAT5_RCAPDAT_Msk (0xfffful << EPWM_RCAPDAT5_RCAPDAT_Pos) /*!< EPWM_T::RCAPDAT5: RCAPDAT Mask */
#define EPWM_FCAPDAT5_FCAPDAT_Pos (0) /*!< EPWM_T::FCAPDAT5: FCAPDAT Position */
#define EPWM_FCAPDAT5_FCAPDAT_Msk (0xfffful << EPWM_FCAPDAT5_FCAPDAT_Pos) /*!< EPWM_T::FCAPDAT5: FCAPDAT Mask */
#define EPWM_PDMACTL_CHEN0_1_Pos (0) /*!< EPWM_T::PDMACTL: CHEN0_1 Position */
#define EPWM_PDMACTL_CHEN0_1_Msk (0x1ul << EPWM_PDMACTL_CHEN0_1_Pos) /*!< EPWM_T::PDMACTL: CHEN0_1 Mask */
#define EPWM_PDMACTL_CAPMOD0_1_Pos (1) /*!< EPWM_T::PDMACTL: CAPMOD0_1 Position */
#define EPWM_PDMACTL_CAPMOD0_1_Msk (0x3ul << EPWM_PDMACTL_CAPMOD0_1_Pos) /*!< EPWM_T::PDMACTL: CAPMOD0_1 Mask */
#define EPWM_PDMACTL_CAPORD0_1_Pos (3) /*!< EPWM_T::PDMACTL: CAPORD0_1 Position */
#define EPWM_PDMACTL_CAPORD0_1_Msk (0x1ul << EPWM_PDMACTL_CAPORD0_1_Pos) /*!< EPWM_T::PDMACTL: CAPORD0_1 Mask */
#define EPWM_PDMACTL_CHSEL0_1_Pos (4) /*!< EPWM_T::PDMACTL: CHSEL0_1 Position */
#define EPWM_PDMACTL_CHSEL0_1_Msk (0x1ul << EPWM_PDMACTL_CHSEL0_1_Pos) /*!< EPWM_T::PDMACTL: CHSEL0_1 Mask */
#define EPWM_PDMACTL_CHEN2_3_Pos (8) /*!< EPWM_T::PDMACTL: CHEN2_3 Position */
#define EPWM_PDMACTL_CHEN2_3_Msk (0x1ul << EPWM_PDMACTL_CHEN2_3_Pos) /*!< EPWM_T::PDMACTL: CHEN2_3 Mask */
#define EPWM_PDMACTL_CAPMOD2_3_Pos (9) /*!< EPWM_T::PDMACTL: CAPMOD2_3 Position */
#define EPWM_PDMACTL_CAPMOD2_3_Msk (0x3ul << EPWM_PDMACTL_CAPMOD2_3_Pos) /*!< EPWM_T::PDMACTL: CAPMOD2_3 Mask */
#define EPWM_PDMACTL_CAPORD2_3_Pos (11) /*!< EPWM_T::PDMACTL: CAPORD2_3 Position */
#define EPWM_PDMACTL_CAPORD2_3_Msk (0x1ul << EPWM_PDMACTL_CAPORD2_3_Pos) /*!< EPWM_T::PDMACTL: CAPORD2_3 Mask */
#define EPWM_PDMACTL_CHSEL2_3_Pos (12) /*!< EPWM_T::PDMACTL: CHSEL2_3 Position */
#define EPWM_PDMACTL_CHSEL2_3_Msk (0x1ul << EPWM_PDMACTL_CHSEL2_3_Pos) /*!< EPWM_T::PDMACTL: CHSEL2_3 Mask */
#define EPWM_PDMACTL_CHEN4_5_Pos (16) /*!< EPWM_T::PDMACTL: CHEN4_5 Position */
#define EPWM_PDMACTL_CHEN4_5_Msk (0x1ul << EPWM_PDMACTL_CHEN4_5_Pos) /*!< EPWM_T::PDMACTL: CHEN4_5 Mask */
#define EPWM_PDMACTL_CAPMOD4_5_Pos (17) /*!< EPWM_T::PDMACTL: CAPMOD4_5 Position */
#define EPWM_PDMACTL_CAPMOD4_5_Msk (0x3ul << EPWM_PDMACTL_CAPMOD4_5_Pos) /*!< EPWM_T::PDMACTL: CAPMOD4_5 Mask */
#define EPWM_PDMACTL_CAPORD4_5_Pos (19) /*!< EPWM_T::PDMACTL: CAPORD4_5 Position */
#define EPWM_PDMACTL_CAPORD4_5_Msk (0x1ul << EPWM_PDMACTL_CAPORD4_5_Pos) /*!< EPWM_T::PDMACTL: CAPORD4_5 Mask */
#define EPWM_PDMACTL_CHSEL4_5_Pos (20) /*!< EPWM_T::PDMACTL: CHSEL4_5 Position */
#define EPWM_PDMACTL_CHSEL4_5_Msk (0x1ul << EPWM_PDMACTL_CHSEL4_5_Pos) /*!< EPWM_T::PDMACTL: CHSEL4_5 Mask */
#define EPWM_PDMACAP0_1_CAPBUF_Pos (0) /*!< EPWM_T::PDMACAP0_1: CAPBUF Position */
#define EPWM_PDMACAP0_1_CAPBUF_Msk (0xfffful << EPWM_PDMACAP0_1_CAPBUF_Pos) /*!< EPWM_T::PDMACAP0_1: CAPBUF Mask */
#define EPWM_PDMACAP2_3_CAPBUF_Pos (0) /*!< EPWM_T::PDMACAP2_3: CAPBUF Position */
#define EPWM_PDMACAP2_3_CAPBUF_Msk (0xfffful << EPWM_PDMACAP2_3_CAPBUF_Pos) /*!< EPWM_T::PDMACAP2_3: CAPBUF Mask */
#define EPWM_PDMACAP4_5_CAPBUF_Pos (0) /*!< EPWM_T::PDMACAP4_5: CAPBUF Position */
#define EPWM_PDMACAP4_5_CAPBUF_Msk (0xfffful << EPWM_PDMACAP4_5_CAPBUF_Pos) /*!< EPWM_T::PDMACAP4_5: CAPBUF Mask */
#define EPWM_CAPIEN_CAPRIEN0_Pos (0) /*!< EPWM_T::CAPIEN: CAPRIEN0 Position */
#define EPWM_CAPIEN_CAPRIEN0_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN0_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN0 Mask */
#define EPWM_CAPIEN_CAPRIEN1_Pos (1) /*!< EPWM_T::CAPIEN: CAPRIEN1 Position */
#define EPWM_CAPIEN_CAPRIEN1_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN1_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN1 Mask */
#define EPWM_CAPIEN_CAPRIEN2_Pos (2) /*!< EPWM_T::CAPIEN: CAPRIEN2 Position */
#define EPWM_CAPIEN_CAPRIEN2_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN2_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN2 Mask */
#define EPWM_CAPIEN_CAPRIEN3_Pos (3) /*!< EPWM_T::CAPIEN: CAPRIEN3 Position */
#define EPWM_CAPIEN_CAPRIEN3_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN3_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN3 Mask */
#define EPWM_CAPIEN_CAPRIEN4_Pos (4) /*!< EPWM_T::CAPIEN: CAPRIEN4 Position */
#define EPWM_CAPIEN_CAPRIEN4_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN4_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN4 Mask */
#define EPWM_CAPIEN_CAPRIEN5_Pos (5) /*!< EPWM_T::CAPIEN: CAPRIEN5 Position */
#define EPWM_CAPIEN_CAPRIEN5_Msk (0x1ul << EPWM_CAPIEN_CAPRIEN5_Pos) /*!< EPWM_T::CAPIEN: CAPRIEN5 Mask */
#define EPWM_CAPIEN_CAPFIEN0_Pos (8) /*!< EPWM_T::CAPIEN: CAPFIEN0 Position */
#define EPWM_CAPIEN_CAPFIEN0_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN0_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN0 Mask */
#define EPWM_CAPIEN_CAPFIEN1_Pos (9) /*!< EPWM_T::CAPIEN: CAPFIEN1 Position */
#define EPWM_CAPIEN_CAPFIEN1_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN1_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN1 Mask */
#define EPWM_CAPIEN_CAPFIEN2_Pos (10) /*!< EPWM_T::CAPIEN: CAPFIEN2 Position */
#define EPWM_CAPIEN_CAPFIEN2_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN2_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN2 Mask */
#define EPWM_CAPIEN_CAPFIEN3_Pos (11) /*!< EPWM_T::CAPIEN: CAPFIEN3 Position */
#define EPWM_CAPIEN_CAPFIEN3_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN3_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN3 Mask */
#define EPWM_CAPIEN_CAPFIEN4_Pos (12) /*!< EPWM_T::CAPIEN: CAPFIEN4 Position */
#define EPWM_CAPIEN_CAPFIEN4_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN4_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN4 Mask */
#define EPWM_CAPIEN_CAPFIEN5_Pos (13) /*!< EPWM_T::CAPIEN: CAPFIEN5 Position */
#define EPWM_CAPIEN_CAPFIEN5_Msk (0x1ul << EPWM_CAPIEN_CAPFIEN5_Pos) /*!< EPWM_T::CAPIEN: CAPFIEN5 Mask */
#define EPWM_CAPIF_CRLIF0_Pos (0) /*!< EPWM_T::CAPIF: CRLIF0 Position */
#define EPWM_CAPIF_CRLIF0_Msk (0x1ul << EPWM_CAPIF_CRLIF0_Pos) /*!< EPWM_T::CAPIF: CRLIF0 Mask */
#define EPWM_CAPIF_CRLIF1_Pos (1) /*!< EPWM_T::CAPIF: CRLIF1 Position */
#define EPWM_CAPIF_CRLIF1_Msk (0x1ul << EPWM_CAPIF_CRLIF1_Pos) /*!< EPWM_T::CAPIF: CRLIF1 Mask */
#define EPWM_CAPIF_CRLIF2_Pos (2) /*!< EPWM_T::CAPIF: CRLIF2 Position */
#define EPWM_CAPIF_CRLIF2_Msk (0x1ul << EPWM_CAPIF_CRLIF2_Pos) /*!< EPWM_T::CAPIF: CRLIF2 Mask */
#define EPWM_CAPIF_CRLIF3_Pos (3) /*!< EPWM_T::CAPIF: CRLIF3 Position */
#define EPWM_CAPIF_CRLIF3_Msk (0x1ul << EPWM_CAPIF_CRLIF3_Pos) /*!< EPWM_T::CAPIF: CRLIF3 Mask */
#define EPWM_CAPIF_CRLIF4_Pos (4) /*!< EPWM_T::CAPIF: CRLIF4 Position */
#define EPWM_CAPIF_CRLIF4_Msk (0x1ul << EPWM_CAPIF_CRLIF4_Pos) /*!< EPWM_T::CAPIF: CRLIF4 Mask */
#define EPWM_CAPIF_CRLIF5_Pos (5) /*!< EPWM_T::CAPIF: CRLIF5 Position */
#define EPWM_CAPIF_CRLIF5_Msk (0x1ul << EPWM_CAPIF_CRLIF5_Pos) /*!< EPWM_T::CAPIF: CRLIF5 Mask */
#define EPWM_CAPIF_CFLIF0_Pos (8) /*!< EPWM_T::CAPIF: CFLIF0 Position */
#define EPWM_CAPIF_CFLIF0_Msk (0x1ul << EPWM_CAPIF_CFLIF0_Pos) /*!< EPWM_T::CAPIF: CFLIF0 Mask */
#define EPWM_CAPIF_CFLIF1_Pos (9) /*!< EPWM_T::CAPIF: CFLIF1 Position */
#define EPWM_CAPIF_CFLIF1_Msk (0x1ul << EPWM_CAPIF_CFLIF1_Pos) /*!< EPWM_T::CAPIF: CFLIF1 Mask */
#define EPWM_CAPIF_CFLIF2_Pos (10) /*!< EPWM_T::CAPIF: CFLIF2 Position */
#define EPWM_CAPIF_CFLIF2_Msk (0x1ul << EPWM_CAPIF_CFLIF2_Pos) /*!< EPWM_T::CAPIF: CFLIF2 Mask */
#define EPWM_CAPIF_CFLIF3_Pos (11) /*!< EPWM_T::CAPIF: CFLIF3 Position */
#define EPWM_CAPIF_CFLIF3_Msk (0x1ul << EPWM_CAPIF_CFLIF3_Pos) /*!< EPWM_T::CAPIF: CFLIF3 Mask */
#define EPWM_CAPIF_CFLIF4_Pos (12) /*!< EPWM_T::CAPIF: CFLIF4 Position */
#define EPWM_CAPIF_CFLIF4_Msk (0x1ul << EPWM_CAPIF_CFLIF4_Pos) /*!< EPWM_T::CAPIF: CFLIF4 Mask */
#define EPWM_CAPIF_CFLIF5_Pos (13) /*!< EPWM_T::CAPIF: CFLIF5 Position */
#define EPWM_CAPIF_CFLIF5_Msk (0x1ul << EPWM_CAPIF_CFLIF5_Pos) /*!< EPWM_T::CAPIF: CFLIF5 Mask */
#define EPWM_CAPNF0_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF0: CAPNFEN Position */
#define EPWM_CAPNF0_CAPNFEN_Msk (0x1ul << EPWM_CAPNF0_CAPNFEN_Pos) /*!< EPWM_T::CAPNF0: CAPNFEN Mask */
#define EPWM_CAPNF0_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF0: CAPNFSEL Position */
#define EPWM_CAPNF0_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF0_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF0: CAPNFSEL Mask */
#define EPWM_CAPNF0_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF0: CAPNFCNT Position */
#define EPWM_CAPNF0_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF0_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF0: CAPNFCNT Mask */
#define EPWM_CAPNF1_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF1: CAPNFEN Position */
#define EPWM_CAPNF1_CAPNFEN_Msk (0x1ul << EPWM_CAPNF1_CAPNFEN_Pos) /*!< EPWM_T::CAPNF1: CAPNFEN Mask */
#define EPWM_CAPNF1_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF1: CAPNFSEL Position */
#define EPWM_CAPNF1_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF1_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF1: CAPNFSEL Mask */
#define EPWM_CAPNF1_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF1: CAPNFCNT Position */
#define EPWM_CAPNF1_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF1_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF1: CAPNFCNT Mask */
#define EPWM_CAPNF2_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF2: CAPNFEN Position */
#define EPWM_CAPNF2_CAPNFEN_Msk (0x1ul << EPWM_CAPNF2_CAPNFEN_Pos) /*!< EPWM_T::CAPNF2: CAPNFEN Mask */
#define EPWM_CAPNF2_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF2: CAPNFSEL Position */
#define EPWM_CAPNF2_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF2_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF2: CAPNFSEL Mask */
#define EPWM_CAPNF2_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF2: CAPNFCNT Position */
#define EPWM_CAPNF2_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF2_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF2: CAPNFCNT Mask */
#define EPWM_CAPNF3_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF3: CAPNFEN Position */
#define EPWM_CAPNF3_CAPNFEN_Msk (0x1ul << EPWM_CAPNF3_CAPNFEN_Pos) /*!< EPWM_T::CAPNF3: CAPNFEN Mask */
#define EPWM_CAPNF3_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF3: CAPNFSEL Position */
#define EPWM_CAPNF3_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF3_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF3: CAPNFSEL Mask */
#define EPWM_CAPNF3_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF3: CAPNFCNT Position */
#define EPWM_CAPNF3_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF3_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF3: CAPNFCNT Mask */
#define EPWM_CAPNF4_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF4: CAPNFEN Position */
#define EPWM_CAPNF4_CAPNFEN_Msk (0x1ul << EPWM_CAPNF4_CAPNFEN_Pos) /*!< EPWM_T::CAPNF4: CAPNFEN Mask */
#define EPWM_CAPNF4_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF4: CAPNFSEL Position */
#define EPWM_CAPNF4_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF4_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF4: CAPNFSEL Mask */
#define EPWM_CAPNF4_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF4: CAPNFCNT Position */
#define EPWM_CAPNF4_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF4_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF4: CAPNFCNT Mask */
#define EPWM_CAPNF5_CAPNFEN_Pos (0) /*!< EPWM_T::CAPNF5: CAPNFEN Position */
#define EPWM_CAPNF5_CAPNFEN_Msk (0x1ul << EPWM_CAPNF5_CAPNFEN_Pos) /*!< EPWM_T::CAPNF5: CAPNFEN Mask */
#define EPWM_CAPNF5_CAPNFSEL_Pos (4) /*!< EPWM_T::CAPNF5: CAPNFSEL Position */
#define EPWM_CAPNF5_CAPNFSEL_Msk (0x7ul << EPWM_CAPNF5_CAPNFSEL_Pos) /*!< EPWM_T::CAPNF5: CAPNFSEL Mask */
#define EPWM_CAPNF5_CAPNFCNT_Pos (8) /*!< EPWM_T::CAPNF5: CAPNFCNT Position */
#define EPWM_CAPNF5_CAPNFCNT_Msk (0x7ul << EPWM_CAPNF5_CAPNFCNT_Pos) /*!< EPWM_T::CAPNF5: CAPNFCNT Mask */
#define EPWM_EXTETCTL0_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL0: EXETEN Position */
#define EPWM_EXTETCTL0_EXETEN_Msk (0x1ul << EPWM_EXTETCTL0_EXETEN_Pos) /*!< EPWM_T::EXTETCTL0: EXETEN Mask */
#define EPWM_EXTETCTL0_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL0: CNTACTS Position */
#define EPWM_EXTETCTL0_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL0_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL0: CNTACTS Mask */
#define EPWM_EXTETCTL0_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL0: EXTTRGS Position */
#define EPWM_EXTETCTL0_EXTTRGS_Msk (0xful << EPWM_EXTETCTL0_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL0: EXTTRGS Mask */
#define EPWM_EXTETCTL1_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL1: EXETEN Position */
#define EPWM_EXTETCTL1_EXETEN_Msk (0x1ul << EPWM_EXTETCTL1_EXETEN_Pos) /*!< EPWM_T::EXTETCTL1: EXETEN Mask */
#define EPWM_EXTETCTL1_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL1: CNTACTS Position */
#define EPWM_EXTETCTL1_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL1_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL1: CNTACTS Mask */
#define EPWM_EXTETCTL1_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL1: EXTTRGS Position */
#define EPWM_EXTETCTL1_EXTTRGS_Msk (0xful << EPWM_EXTETCTL1_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL1: EXTTRGS Mask */
#define EPWM_EXTETCTL2_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL2: EXETEN Position */
#define EPWM_EXTETCTL2_EXETEN_Msk (0x1ul << EPWM_EXTETCTL2_EXETEN_Pos) /*!< EPWM_T::EXTETCTL2: EXETEN Mask */
#define EPWM_EXTETCTL2_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL2: CNTACTS Position */
#define EPWM_EXTETCTL2_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL2_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL2: CNTACTS Mask */
#define EPWM_EXTETCTL2_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL2: EXTTRGS Position */
#define EPWM_EXTETCTL2_EXTTRGS_Msk (0xful << EPWM_EXTETCTL2_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL2: EXTTRGS Mask */
#define EPWM_EXTETCTL3_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL3: EXETEN Position */
#define EPWM_EXTETCTL3_EXETEN_Msk (0x1ul << EPWM_EXTETCTL3_EXETEN_Pos) /*!< EPWM_T::EXTETCTL3: EXETEN Mask */
#define EPWM_EXTETCTL3_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL3: CNTACTS Position */
#define EPWM_EXTETCTL3_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL3_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL3: CNTACTS Mask */
#define EPWM_EXTETCTL3_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL3: EXTTRGS Position */
#define EPWM_EXTETCTL3_EXTTRGS_Msk (0xful << EPWM_EXTETCTL3_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL3: EXTTRGS Mask */
#define EPWM_EXTETCTL4_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL4: EXETEN Position */
#define EPWM_EXTETCTL4_EXETEN_Msk (0x1ul << EPWM_EXTETCTL4_EXETEN_Pos) /*!< EPWM_T::EXTETCTL4: EXETEN Mask */
#define EPWM_EXTETCTL4_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL4: CNTACTS Position */
#define EPWM_EXTETCTL4_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL4_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL4: CNTACTS Mask */
#define EPWM_EXTETCTL4_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL4: EXTTRGS Position */
#define EPWM_EXTETCTL4_EXTTRGS_Msk (0xful << EPWM_EXTETCTL4_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL4: EXTTRGS Mask */
#define EPWM_EXTETCTL5_EXETEN_Pos (0) /*!< EPWM_T::EXTETCTL5: EXETEN Position */
#define EPWM_EXTETCTL5_EXETEN_Msk (0x1ul << EPWM_EXTETCTL5_EXETEN_Pos) /*!< EPWM_T::EXTETCTL5: EXETEN Mask */
#define EPWM_EXTETCTL5_CNTACTS_Pos (4) /*!< EPWM_T::EXTETCTL5: CNTACTS Position */
#define EPWM_EXTETCTL5_CNTACTS_Msk (0x3ul << EPWM_EXTETCTL5_CNTACTS_Pos) /*!< EPWM_T::EXTETCTL5: CNTACTS Mask */
#define EPWM_EXTETCTL5_EXTTRGS_Pos (8) /*!< EPWM_T::EXTETCTL5: EXTTRGS Position */
#define EPWM_EXTETCTL5_EXTTRGS_Msk (0xful << EPWM_EXTETCTL5_EXTTRGS_Pos) /*!< EPWM_T::EXTETCTL5: EXTTRGS Mask */
#define EPWM_SWEOFCTL_OUTACTS0_Pos (0) /*!< EPWM_T::SWEOFCTL: OUTACTS0 Position */
#define EPWM_SWEOFCTL_OUTACTS0_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS0_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS0 Mask */
#define EPWM_SWEOFCTL_OUTACTS1_Pos (2) /*!< EPWM_T::SWEOFCTL: OUTACTS1 Position */
#define EPWM_SWEOFCTL_OUTACTS1_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS1_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS1 Mask */
#define EPWM_SWEOFCTL_OUTACTS2_Pos (4) /*!< EPWM_T::SWEOFCTL: OUTACTS2 Position */
#define EPWM_SWEOFCTL_OUTACTS2_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS2_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS2 Mask */
#define EPWM_SWEOFCTL_OUTACTS3_Pos (6) /*!< EPWM_T::SWEOFCTL: OUTACTS3 Position */
#define EPWM_SWEOFCTL_OUTACTS3_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS3_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS3 Mask */
#define EPWM_SWEOFCTL_OUTACTS4_Pos (8) /*!< EPWM_T::SWEOFCTL: OUTACTS4 Position */
#define EPWM_SWEOFCTL_OUTACTS4_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS4_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS4 Mask */
#define EPWM_SWEOFCTL_OUTACTS5_Pos (10) /*!< EPWM_T::SWEOFCTL: OUTACTS5 Position */
#define EPWM_SWEOFCTL_OUTACTS5_Msk (0x3ul << EPWM_SWEOFCTL_OUTACTS5_Pos) /*!< EPWM_T::SWEOFCTL: OUTACTS5 Mask */
#define EPWM_SWEOFTRG_SWETRG0_Pos (0) /*!< EPWM_T::SWEOFTRG: SWETRG0 Position */
#define EPWM_SWEOFTRG_SWETRG0_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG0_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG0 Mask */
#define EPWM_SWEOFTRG_SWETRG1_Pos (1) /*!< EPWM_T::SWEOFTRG: SWETRG1 Position */
#define EPWM_SWEOFTRG_SWETRG1_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG1_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG1 Mask */
#define EPWM_SWEOFTRG_SWETRG2_Pos (2) /*!< EPWM_T::SWEOFTRG: SWETRG2 Position */
#define EPWM_SWEOFTRG_SWETRG2_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG2_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG2 Mask */
#define EPWM_SWEOFTRG_SWETRG3_Pos (3) /*!< EPWM_T::SWEOFTRG: SWETRG3 Position */
#define EPWM_SWEOFTRG_SWETRG3_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG3_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG3 Mask */
#define EPWM_SWEOFTRG_SWETRG4_Pos (4) /*!< EPWM_T::SWEOFTRG: SWETRG4 Position */
#define EPWM_SWEOFTRG_SWETRG4_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG4_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG4 Mask */
#define EPWM_SWEOFTRG_SWETRG5_Pos (5) /*!< EPWM_T::SWEOFTRG: SWETRG5 Position */
#define EPWM_SWEOFTRG_SWETRG5_Msk (0x1ul << EPWM_SWEOFTRG_SWETRG5_Pos) /*!< EPWM_T::SWEOFTRG: SWETRG5 Mask */
#define EPWM_CLKPSC0_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC0: CLKPSC Position */
#define EPWM_CLKPSC0_CLKPSC_Msk (0xffful << EPWM_CLKPSC0_CLKPSC_Pos) /*!< EPWM_T::CLKPSC0: CLKPSC Mask */
#define EPWM_CLKPSC1_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC1: CLKPSC Position */
#define EPWM_CLKPSC1_CLKPSC_Msk (0xffful << EPWM_CLKPSC1_CLKPSC_Pos) /*!< EPWM_T::CLKPSC1: CLKPSC Mask */
#define EPWM_CLKPSC2_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC2: CLKPSC Position */
#define EPWM_CLKPSC2_CLKPSC_Msk (0xffful << EPWM_CLKPSC2_CLKPSC_Pos) /*!< EPWM_T::CLKPSC2: CLKPSC Mask */
#define EPWM_CLKPSC3_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC3: CLKPSC Position */
#define EPWM_CLKPSC3_CLKPSC_Msk (0xffful << EPWM_CLKPSC3_CLKPSC_Pos) /*!< EPWM_T::CLKPSC3: CLKPSC Mask */
#define EPWM_CLKPSC4_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC4: CLKPSC Position */
#define EPWM_CLKPSC4_CLKPSC_Msk (0xffful << EPWM_CLKPSC4_CLKPSC_Pos) /*!< EPWM_T::CLKPSC4: CLKPSC Mask */
#define EPWM_CLKPSC5_CLKPSC_Pos (0) /*!< EPWM_T::CLKPSC5: CLKPSC Position */
#define EPWM_CLKPSC5_CLKPSC_Msk (0xffful << EPWM_CLKPSC5_CLKPSC_Pos) /*!< EPWM_T::CLKPSC5: CLKPSC Mask */
#define EPWM_RDTCNT0_1_RDTCNT_Pos (0) /*!< EPWM_T::RDTCNT0_1: RDTCNT Position */
#define EPWM_RDTCNT0_1_RDTCNT_Msk (0xffful << EPWM_RDTCNT0_1_RDTCNT_Pos) /*!< EPWM_T::RDTCNT0_1: RDTCNT Mask */
#define EPWM_RDTCNT2_3_RDTCNT_Pos (0) /*!< EPWM_T::RDTCNT2_3: RDTCNT Position */
#define EPWM_RDTCNT2_3_RDTCNT_Msk (0xffful << EPWM_RDTCNT2_3_RDTCNT_Pos) /*!< EPWM_T::RDTCNT2_3: RDTCNT Mask */
#define EPWM_RDTCNT4_5_RDTCNT_Pos (0) /*!< EPWM_T::RDTCNT4_5: RDTCNT Position */
#define EPWM_RDTCNT4_5_RDTCNT_Msk (0xffful << EPWM_RDTCNT4_5_RDTCNT_Pos) /*!< EPWM_T::RDTCNT4_5: RDTCNT Mask */
#define EPWM_FDTCNT0_1_FDTCNT_Pos (0) /*!< EPWM_T::FDTCNT0_1: FDTCNT Position */
#define EPWM_FDTCNT0_1_FDTCNT_Msk (0xffful << EPWM_FDTCNT0_1_FDTCNT_Pos) /*!< EPWM_T::FDTCNT0_1: FDTCNT Mask */
#define EPWM_FDTCNT2_3_FDTCNT_Pos (0) /*!< EPWM_T::FDTCNT2_3: FDTCNT Position */
#define EPWM_FDTCNT2_3_FDTCNT_Msk (0xffful << EPWM_FDTCNT2_3_FDTCNT_Pos) /*!< EPWM_T::FDTCNT2_3: FDTCNT Mask */
#define EPWM_FDTCNT4_5_FDTCNT_Pos (0) /*!< EPWM_T::FDTCNT4_5: FDTCNT Position */
#define EPWM_FDTCNT4_5_FDTCNT_Msk (0xffful << EPWM_FDTCNT4_5_FDTCNT_Pos) /*!< EPWM_T::FDTCNT4_5: FDTCNT Mask */
#define EPWM_DTCTL_RDTEN0_Pos (0) /*!< EPWM_T::DTCTL: RDTEN0 Position */
#define EPWM_DTCTL_RDTEN0_Msk (0x1ul << EPWM_DTCTL_RDTEN0_Pos) /*!< EPWM_T::DTCTL: RDTEN0 Mask */
#define EPWM_DTCTL_RDTEN2_Pos (1) /*!< EPWM_T::DTCTL: RDTEN2 Position */
#define EPWM_DTCTL_RDTEN2_Msk (0x1ul << EPWM_DTCTL_RDTEN2_Pos) /*!< EPWM_T::DTCTL: RDTEN2 Mask */
#define EPWM_DTCTL_RDTEN4_Pos (2) /*!< EPWM_T::DTCTL: RDTEN4 Position */
#define EPWM_DTCTL_RDTEN4_Msk (0x1ul << EPWM_DTCTL_RDTEN4_Pos) /*!< EPWM_T::DTCTL: RDTEN4 Mask */
#define EPWM_DTCTL_FDTEN0_Pos (8) /*!< EPWM_T::DTCTL: FDTEN0 Position */
#define EPWM_DTCTL_FDTEN0_Msk (0x1ul << EPWM_DTCTL_FDTEN0_Pos) /*!< EPWM_T::DTCTL: FDTEN0 Mask */
#define EPWM_DTCTL_FDTEN2_Pos (9) /*!< EPWM_T::DTCTL: FDTEN2 Position */
#define EPWM_DTCTL_FDTEN2_Msk (0x1ul << EPWM_DTCTL_FDTEN2_Pos) /*!< EPWM_T::DTCTL: FDTEN2 Mask */
#define EPWM_DTCTL_FDTEN4_Pos (10) /*!< EPWM_T::DTCTL: FDTEN4 Position */
#define EPWM_DTCTL_FDTEN4_Msk (0x1ul << EPWM_DTCTL_FDTEN4_Pos) /*!< EPWM_T::DTCTL: FDTEN4 Mask */
#define EPWM_DTCTL_DTCKSEL0_Pos (16) /*!< EPWM_T::DTCTL: DTCKSEL0 Position */
#define EPWM_DTCTL_DTCKSEL0_Msk (0x1ul << EPWM_DTCTL_DTCKSEL0_Pos) /*!< EPWM_T::DTCTL: DTCKSEL0 Mask */
#define EPWM_DTCTL_DTCKSEL2_Pos (17) /*!< EPWM_T::DTCTL: DTCKSEL2 Position */
#define EPWM_DTCTL_DTCKSEL2_Msk (0x1ul << EPWM_DTCTL_DTCKSEL2_Pos) /*!< EPWM_T::DTCTL: DTCKSEL2 Mask */
#define EPWM_DTCTL_DTCKSEL4_Pos (18) /*!< EPWM_T::DTCTL: DTCKSEL4 Position */
#define EPWM_DTCTL_DTCKSEL4_Msk (0x1ul << EPWM_DTCTL_DTCKSEL4_Pos) /*!< EPWM_T::DTCTL: DTCKSEL4 Mask */
#define EPWM_PBUF0_PBUF_Pos (0) /*!< EPWM_T::PBUF0: PBUF Position */
#define EPWM_PBUF0_PBUF_Msk (0xfffful << EPWM_PBUF0_PBUF_Pos) /*!< EPWM_T::PBUF0: PBUF Mask */
#define EPWM_PBUF1_PBUF_Pos (0) /*!< EPWM_T::PBUF1: PBUF Position */
#define EPWM_PBUF1_PBUF_Msk (0xfffful << EPWM_PBUF1_PBUF_Pos) /*!< EPWM_T::PBUF1: PBUF Mask */
#define EPWM_PBUF2_PBUF_Pos (0) /*!< EPWM_T::PBUF2: PBUF Position */
#define EPWM_PBUF2_PBUF_Msk (0xfffful << EPWM_PBUF2_PBUF_Pos) /*!< EPWM_T::PBUF2: PBUF Mask */
#define EPWM_PBUF3_PBUF_Pos (0) /*!< EPWM_T::PBUF3: PBUF Position */
#define EPWM_PBUF3_PBUF_Msk (0xfffful << EPWM_PBUF3_PBUF_Pos) /*!< EPWM_T::PBUF3: PBUF Mask */
#define EPWM_PBUF4_PBUF_Pos (0) /*!< EPWM_T::PBUF4: PBUF Position */
#define EPWM_PBUF4_PBUF_Msk (0xfffful << EPWM_PBUF4_PBUF_Pos) /*!< EPWM_T::PBUF4: PBUF Mask */
#define EPWM_PBUF5_PBUF_Pos (0) /*!< EPWM_T::PBUF5: PBUF Position */
#define EPWM_PBUF5_PBUF_Msk (0xfffful << EPWM_PBUF5_PBUF_Pos) /*!< EPWM_T::PBUF5: PBUF Mask */
#define EPWM_CMPBUF0_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF0: CMPBUF Position */
#define EPWM_CMPBUF0_CMPBUF_Msk (0xfffful << EPWM_CMPBUF0_CMPBUF_Pos) /*!< EPWM_T::CMPBUF0: CMPBUF Mask */
#define EPWM_CMPBUF1_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF1: CMPBUF Position */
#define EPWM_CMPBUF1_CMPBUF_Msk (0xfffful << EPWM_CMPBUF1_CMPBUF_Pos) /*!< EPWM_T::CMPBUF1: CMPBUF Mask */
#define EPWM_CMPBUF2_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF2: CMPBUF Position */
#define EPWM_CMPBUF2_CMPBUF_Msk (0xfffful << EPWM_CMPBUF2_CMPBUF_Pos) /*!< EPWM_T::CMPBUF2: CMPBUF Mask */
#define EPWM_CMPBUF3_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF3: CMPBUF Position */
#define EPWM_CMPBUF3_CMPBUF_Msk (0xfffful << EPWM_CMPBUF3_CMPBUF_Pos) /*!< EPWM_T::CMPBUF3: CMPBUF Mask */
#define EPWM_CMPBUF4_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF4: CMPBUF Position */
#define EPWM_CMPBUF4_CMPBUF_Msk (0xfffful << EPWM_CMPBUF4_CMPBUF_Pos) /*!< EPWM_T::CMPBUF4: CMPBUF Mask */
#define EPWM_CMPBUF5_CMPBUF_Pos (0) /*!< EPWM_T::CMPBUF5: CMPBUF Position */
#define EPWM_CMPBUF5_CMPBUF_Msk (0xfffful << EPWM_CMPBUF5_CMPBUF_Pos) /*!< EPWM_T::CMPBUF5: CMPBUF Mask */
#define EPWM_FTCBUF0_1_FTCMPBUF_Pos (0) /*!< EPWM_T::FTCBUF0_1: FTCMPBUF Position */
#define EPWM_FTCBUF0_1_FTCMPBUF_Msk (0xfffful << EPWM_FTCBUF0_1_FTCMPBUF_Pos) /*!< EPWM_T::FTCBUF0_1: FTCMPBUF Mask */
#define EPWM_FTCBUF2_3_FTCMPBUF_Pos (0) /*!< EPWM_T::FTCBUF2_3: FTCMPBUF Position */
#define EPWM_FTCBUF2_3_FTCMPBUF_Msk (0xfffful << EPWM_FTCBUF2_3_FTCMPBUF_Pos) /*!< EPWM_T::FTCBUF2_3: FTCMPBUF Mask */
#define EPWM_FTCBUF4_5_FTCMPBUF_Pos (0) /*!< EPWM_T::FTCBUF4_5: FTCMPBUF Position */
#define EPWM_FTCBUF4_5_FTCMPBUF_Msk (0xfffful << EPWM_FTCBUF4_5_FTCMPBUF_Pos) /*!< EPWM_T::FTCBUF4_5: FTCMPBUF Mask */
#define EPWM_FTCI_FTCMU0_Pos (0) /*!< EPWM_T::FTCI: FTCMU0 Position */
#define EPWM_FTCI_FTCMU0_Msk (0x1ul << EPWM_FTCI_FTCMU0_Pos) /*!< EPWM_T::FTCI: FTCMU0 Mask */
#define EPWM_FTCI_FTCMU2_Pos (1) /*!< EPWM_T::FTCI: FTCMU2 Position */
#define EPWM_FTCI_FTCMU2_Msk (0x1ul << EPWM_FTCI_FTCMU2_Pos) /*!< EPWM_T::FTCI: FTCMU2 Mask */
#define EPWM_FTCI_FTCMU4_Pos (2) /*!< EPWM_T::FTCI: FTCMU4 Position */
#define EPWM_FTCI_FTCMU4_Msk (0x1ul << EPWM_FTCI_FTCMU4_Pos) /*!< EPWM_T::FTCI: FTCMU4 Mask */
#define EPWM_FTCI_FTCMD0_Pos (8) /*!< EPWM_T::FTCI: FTCMD0 Position */
#define EPWM_FTCI_FTCMD0_Msk (0x1ul << EPWM_FTCI_FTCMD0_Pos) /*!< EPWM_T::FTCI: FTCMD0 Mask */
#define EPWM_FTCI_FTCMD2_Pos (9) /*!< EPWM_T::FTCI: FTCMD2 Position */
#define EPWM_FTCI_FTCMD2_Msk (0x1ul << EPWM_FTCI_FTCMD2_Pos) /*!< EPWM_T::FTCI: FTCMD2 Mask */
#define EPWM_FTCI_FTCMD4_Pos (10) /*!< EPWM_T::FTCI: FTCMD4 Position */
#define EPWM_FTCI_FTCMD4_Msk (0x1ul << EPWM_FTCI_FTCMD4_Pos) /*!< EPWM_T::FTCI: FTCMD4 Mask */
#define EPWM_CPSCBUF0_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF0: CPSCBUF Position */
#define EPWM_CPSCBUF0_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF0_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF0: CPSCBUF Mask */
#define EPWM_CPSCBUF1_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF1: CPSCBUF Position */
#define EPWM_CPSCBUF1_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF1_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF1: CPSCBUF Mask */
#define EPWM_CPSCBUF2_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF2: CPSCBUF Position */
#define EPWM_CPSCBUF2_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF2_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF2: CPSCBUF Mask */
#define EPWM_CPSCBUF3_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF3: CPSCBUF Position */
#define EPWM_CPSCBUF3_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF3_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF3: CPSCBUF Mask */
#define EPWM_CPSCBUF4_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF4: CPSCBUF Position */
#define EPWM_CPSCBUF4_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF4_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF4: CPSCBUF Mask */
#define EPWM_CPSCBUF5_CPSCBUF_Pos (0) /*!< EPWM_T::CPSCBUF5: CPSCBUF Position */
#define EPWM_CPSCBUF5_CPSCBUF_Msk (0xffful << EPWM_CPSCBUF5_CPSCBUF_Pos) /*!< EPWM_T::CPSCBUF5: CPSCBUF Mask */
#define EPWM_IFACNT0_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT0: ACUCNT Position */
#define EPWM_IFACNT0_ACUCNT_Msk (0xfffful << EPWM_IFACNT0_ACUCNT_Pos) /*!< EPWM_T::IFACNT0: ACUCNT Mask */
#define EPWM_IFACNT1_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT1: ACUCNT Position */
#define EPWM_IFACNT1_ACUCNT_Msk (0xfffful << EPWM_IFACNT1_ACUCNT_Pos) /*!< EPWM_T::IFACNT1: ACUCNT Mask */
#define EPWM_IFACNT2_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT2: ACUCNT Position */
#define EPWM_IFACNT2_ACUCNT_Msk (0xfffful << EPWM_IFACNT2_ACUCNT_Pos) /*!< EPWM_T::IFACNT2: ACUCNT Mask */
#define EPWM_IFACNT3_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT3: ACUCNT Position */
#define EPWM_IFACNT3_ACUCNT_Msk (0xfffful << EPWM_IFACNT3_ACUCNT_Pos) /*!< EPWM_T::IFACNT3: ACUCNT Mask */
#define EPWM_IFACNT4_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT4: ACUCNT Position */
#define EPWM_IFACNT4_ACUCNT_Msk (0xfffful << EPWM_IFACNT4_ACUCNT_Pos) /*!< EPWM_T::IFACNT4: ACUCNT Mask */
#define EPWM_IFACNT5_ACUCNT_Pos (0) /*!< EPWM_T::IFACNT5: ACUCNT Position */
#define EPWM_IFACNT5_ACUCNT_Msk (0xfffful << EPWM_IFACNT5_ACUCNT_Pos) /*!< EPWM_T::IFACNT5: ACUCNT Mask */
/**@}*/ /* EPWM_CONST */
/**@}*/ /* end of EPWM register group */
/**@}*/ /* end of REGISTER group */
#if defined ( __CC_ARM )
#pragma no_anon_unions
#endif
#endif /* __EPWM_REG_H__ */
