/**************************************************************************//**
* @file hsusbd_reg.h
* @version V3.00
* @brief HSUSBD register definition header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __HSUSBD_REG_H__
#define __HSUSBD_REG_H__
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/**
@addtogroup REGISTER Control Register
@{
*/
/**
@addtogroup HSUSBD USB 2.0 Device Controller(HSUSBD)
Memory Mapped Structure for HSUSBD Controller
@{ */
typedef struct
{
/**
* @var HSUSBD_EP_T::EPDAT
* Offset: 0x00 Endpoint n Data Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[31:0] |EPDAT |Endpoint A~L Data Register
* | | |Endpoint A~L data buffer for the buffer transaction (read or write).
* | | |Note: Only word access is supported.
* @var HSUSBD_EP_T::EPDAT_BYTE
* Offset: 0x00 Endpoint n Data Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |EPDAT |Endpoint A~L Data Register
* | | |Endpoint A~L data buffer for the buffer transaction (read or write).
* | | |Note: Only byte access is supported.
* @var HSUSBD_EP_T::EPINTSTS
* Offset: 0x04 Endpoint n Interrupt Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BUFFULLIF |Buffer Full
* | | |For an IN endpoint, the currently selected buffer is full, or no buffer is available to the local side for writing (no space to write)
* | | |For an OUT endpoint, there is a buffer available on the local side, and there are FIFO full of bytes available to be read (entire packet is available for reading).
* | | |0 = The endpoint packet buffer is not full.
* | | |1 = The endpoint packet buffer is full.
* | | |Note: This bit is read-only.
* |[1] |BUFEMPTYIF|Buffer Empty
* | | |For an IN endpoint, a buffer is available to the local side for writing up to FIFO full of bytes.
* | | |0 = The endpoint buffer is not empty.
* | | |1 = The endpoint buffer is empty.
* | | |For an OUT endpoint:
* | | |0 = The currently selected buffer has not a count of 0.
* | | |1 = The currently selected buffer has a count of 0, or no buffer is available on the local side (nothing to read).
* | | |Note: This bit is read-only.
* |[2] |SHORTTXIF |Short Packet Transferred Interrupt
* | | |0 = The length of the last packet was not less than the Maximum Packet Size (EPMPS).
* | | |1 = The length of the last packet was less than the Maximum Packet Size (EPMPS).
* | | |Note: Write 1 to clear this bit to 0.
* |[3] |TXPKIF |Data Packet Transmitted Interrupt
* | | |0 = Not a data packet is transmitted from the endpoint to the host.
* | | |1 = A data packet is transmitted from the endpoint to the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[4] |RXPKIF |Data Packet Received Interrupt
* | | |0 = No data packet is received from the host by the endpoint.
* | | |1 = A data packet is received from the host by the endpoint.
* | | |Note: Write 1 to clear this bit to 0.
* |[5] |OUTTKIF |Data OUT Token Interrupt
* | | |0 = A Data OUT token has not been received from the host.
* | | |1 = A Data OUT token has been received from the host
* | | |This bit also set by PING token (in high-speed only).
* | | |Note: Write 1 to clear this bit to 0.
* |[6] |INTKIF |Data IN Token Interrupt
* | | |0 = Not Data IN token has been received from the host.
* | | |1 = A Data IN token has been received from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[7] |PINGIF |PING Token Interrupt
* | | |0 = A Data PING token has not been received from the host.
* | | |1 = A Data PING token has been received from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[8] |NAKIF |USB NAK Sent
* | | |0 = The last USB IN packet could be provided, and was acknowledged with an ACK.
* | | |1 = The last USB IN packet could not be provided, and was acknowledged with a NAK.
* | | |Note: Write 1 to clear this bit to 0.
* |[9] |STALLIF |USB STALL Sent
* | | |0 = The last USB packet could be accepted or provided because the endpoint was stalled, and was acknowledged with a STALL.
* | | |1 = The last USB packet could not be accepted or provided because the endpoint was stalled, and was acknowledged with a STALL.
* | | |Note: Write 1 to clear this bit to 0.
* |[10] |NYETIF |NYET Sent
* | | |0 = The space available in the RAM is sufficient to accommodate the next on coming data packet.
* | | |1 = The space available in the RAM is not sufficient to accommodate the next on coming data packet.
* | | |Note: Write 1 to clear this bit to 0.
* |[11] |ERRIF |ERR Sent
* | | |0 = No any error in the transaction.
* | | |1 = There occurs any error in the transaction.
* | | |Note: Write 1 to clear this bit to 0.
* |[12] |SHORTRXIF |Bulk Out Short Packet Received
* | | |0 = No bulk out short packet is received.
* | | |1 = Received bulk out short packet (including zero length packet).
* | | |Note: Write 1 to clear this bit to 0.
* @var HSUSBD_EP_T::EPINTEN
* Offset: 0x08 Endpoint n Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BUFFULLIEN|Buffer Full Interrupt
* | | |When set, this bit enables a local interrupt to be set when a buffer full condition is detected on the bus.
* | | |0 = Buffer full interrupt Disabled.
* | | |1 = Buffer full interrupt Enabled.
* |[1] |BUFEMPTYIEN|Buffer Empty Interrupt
* | | |When set, this bit enables a local interrupt to be set when a buffer empty condition is detected on the bus.
* | | |0 = Buffer empty interrupt Disabled.
* | | |1 = Buffer empty interrupt Enabled.
* |[2] |SHORTTXIEN|Short Packet Transferred Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a short data packet has been transferred to/from the host.
* | | |0 = Short data packet interrupt Disabled.
* | | |1 = Short data packet interrupt Enabled.
* |[3] |TXPKIEN |Data Packet Transmitted Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a data packet has been received from the host.
* | | |0 = Data packet has been received from the host interrupt Disabled.
* | | |1 = Data packet has been received from the host interrupt Enabled.
* |[4] |RXPKIEN |Data Packet Received Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a data packet has been transmitted to the host.
* | | |0 = Data packet has been transmitted to the host interrupt Disabled.
* | | |1 = Data packet has been transmitted to the host interrupt Enabled.
* |[5] |OUTTKIEN |Data OUT Token Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a Data OUT token has been received from the host.
* | | |0 = Data OUT token interrupt Disabled.
* | | |1 = Data OUT token interrupt Enabled.
* |[6] |INTKIEN |Data IN Token Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a Data IN token has been received from the host.
* | | |0 = Data IN token interrupt Disabled.
* | | |1 = Data IN token interrupt Enabled.
* |[7] |PINGIEN |PING Token Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a PING token has been received from the host.
* | | |0 = PING token interrupt Disabled.
* | | |1 = PING token interrupt Enabled.
* |[8] |NAKIEN |USB NAK Sent Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a NAK token is sent to the host.
* | | |0 = NAK token interrupt Disabled.
* | | |1 = NAK token interrupt Enabled.
* |[9] |STALLIEN |USB STALL Sent Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set when a stall token is sent to the host.
* | | |0 = STALL token interrupt Disabled.
* | | |1 = STALL token interrupt Enabled.
* |[10] |NYETIEN |NYET Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set whenever NYET condition occurs on the bus for this endpoint.
* | | |0 = NYET condition interrupt Disabled.
* | | |1 = NYET condition interrupt Enabled.
* |[11] |ERRIEN |ERR Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set whenever ERR condition occurs on the bus for this endpoint.
* | | |0 = Error event interrupt Disabled.
* | | |1 = Error event interrupt Enabled.
* |[12] |SHORTRXIEN|Bulk Out Short Packet Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be set whenever bulk out short packet occurs on the bus for this endpoint.
* | | |0 = Bulk out interrupt Disabled.
* | | |1 = Bulk out interrupt Enabled.
* @var HSUSBD_EP_T::EPDATCNT
* Offset: 0x0C Endpoint n Data Available Count Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |DATCNT |Data Count
* | | |For an IN endpoint (EPDIR(USBD_EPxCFG[3] is high.), this register returns the number of valid bytes in the IN endpoint packet buffer.
* | | |For an OUT endpoint (EPDIR(USBD_EPxCFG[3] is low.), this register returns the number of received valid bytes in the Host OUT transfer.
* |[30:16] |DMALOOP |DMA Loop
* | | |This register is the remaining DMA loop to complete. Each loop means 32-byte transfer.
* @var HSUSBD_EP_T::EPRSPCTL
* Offset: 0x10 Endpoint n Response Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FLUSH |Buffer Flush
* | | |Writing 1 to this bit causes the packet buffer to be flushed and the corresponding EP_AVAIL register to be cleared
* | | |This bit is self-clearing
* | | |This bit should always be written after an configuration event.
* | | |0 = The packet buffer is not flushed.
* | | |1 = The packet buffer is flushed by user.
* |[2:1] |MODE |Mode Control
* | | |The two bits decide the operation mode of the in-endpoint.
* | | |00: Auto-Validate Mode
* | | |01: Manual-Validate Mode
* | | |10: Fly Mode
* | | |11: Reserved
* | | |These bits are not valid for an out-endpoint
* | | |The auto validate mode will be activated when the reserved mode is selected
* |[3] |TOGGLE |Endpoint Toggle
* | | |This bit is used to clear the endpoint data toggle bit
* | | |Reading this bit returns the current state of the endpoint data toggle bit.
* | | |The local CPU may use this bit to initialize the end-point's toggle in case of reception of a Set Interface request or a Clear Feature (ep_halt) request from the host
* | | |Only when toggle bit is "1", this bit can be written into the inversed write data bit[3].
* | | |0 = Not clear the endpoint data toggle bit.
* | | |1 = Clear the endpoint data toggle bit.
* |[4] |HALT |Endpoint Halt
* | | |This bit is used to send a STALL handshake as response to the token from the host
* | | |When an Endpoint Set Feature (ep_halt) is detected by the local CPU, it must write a '1' to this bit.
* | | |0 = Not send a STALL handshake as response to the token from the host.
* | | |1 = Send a STALL handshake as response to the token from the host.
* |[5] |ZEROLEN |Zero Length
* | | |This bit is used to send a zero-length packet response to an IN-token
* | | |When this bit is set, a zero packet is sent to the host on reception of an IN-token
* | | |This bit gets cleared once the zero length data packet is sent.
* | | |0 = A zero packet is not sent to the host on reception of an IN-token.
* | | |1 = A zero packet is sent to the host on reception of an IN-token.
* |[6] |SHORTTXEN |Short Packet Transfer Enable
* | | |This bit is applicable only in case of Auto-Validate Method
* | | |This bit is set to validate any remaining data in the buffer which is not equal to the MPS of the endpoint, and happens to be the last transfer
* | | |This bit gets cleared once the data packet is sent.
* | | |0 = Not validate any remaining data in the buffer which is not equal to the MPS of the endpoint.
* | | |1 = Validate any remaining data in the buffer which is not equal to the MPS of the endpoint.
* |[7] |DISBUF |Buffer Disable Bit
* | | |This bit is used to receive unknown size OUT short packet
* | | |The received packet size is reference USBD_EPxDATCNT register.
* | | |0 = Buffer Not Disabled when Bulk-OUT short packet is received.
* | | |1 = Buffer Disabled when Bulk-OUT short packet is received.
* @var HSUSBD_EP_T::EPMPS
* Offset: 0x14 Endpoint n Maximum Packet Size Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[10:0] |EPMPS |Endpoint Maximum Packet Size
* | | |This field determines the Maximum Packet Size of the Endpoint.
* @var HSUSBD_EP_T::EPTXCNT
* Offset: 0x18 Endpoint n Transfer Count Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[10:0] |TXCNT |Endpoint Transfer Count
* | | |For IN endpoints, this field determines the total number of bytes to be sent to the host in case of manual validation method.
* | | |For OUT endpoints, this field has no effect.
* @var HSUSBD_EP_T::EPCFG
* Offset: 0x1C Endpoint n Configuration Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EPEN |Endpoint Valid
* | | |When set, this bit enables this endpoint
* | | |This bit has no effect on Endpoint 0, which is always enabled.
* | | |0 = The endpoint Disabled.
* | | |1 = The endpoint Enabled.
* |[2:1] |EPTYPE |Endpoint Type
* | | |This field selects the type of this endpoint. Endpoint 0 is forced to a Control type.
* | | |00 = Reserved.
* | | |01 = Bulk.
* | | |10 = Interrupt.
* | | |11 = Isochronous.
* |[3] |EPDIR |Endpoint Direction
* | | |0 = out-endpoint (Host OUT to Device).
* | | |1 = in-endpoint (Host IN to Device).
* | | |Note: A maximum of one OUT and IN endpoint is allowed for each endpoint number.
* |[7:4] |EPNUM |Endpoint Number
* | | |This field selects the number of the endpoint. Valid numbers 1 to 15.
* | | |Note: Do not support two endpoints have same endpoint number.
* @var HSUSBD_EP_T::EPBUFST
* Offset: 0x20 Endpoint n RAM Start Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |SADDR |Endpoint Start Address
* | | |This is the start-address of the RAM space allocated for the endpoint A~L.
* @var HSUSBD_EP_T::EPBUFEND
* Offset: 0x24 Endpoint n RAM End Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |EADDR |Endpoint End Address
* | | |This is the end-address of the RAM space allocated for the endpoint A~L.
*/
union
{
__IO uint32_t EPDAT;
__IO uint8_t EPDAT_BYTE;
}; /*!< [0x0000] Endpoint n Data Register */
__IO uint32_t EPINTSTS; /*!< [0x0004] Endpoint n Interrupt Status Register */
__IO uint32_t EPINTEN; /*!< [0x0008] Endpoint n Interrupt Enable Register */
__I uint32_t EPDATCNT; /*!< [0x000c] Endpoint n Data Available Count Register */
__IO uint32_t EPRSPCTL; /*!< [0x0010] Endpoint n Response Control Register */
__IO uint32_t EPMPS; /*!< [0x0014] Endpoint n Maximum Packet Size Register */
__IO uint32_t EPTXCNT; /*!< [0x0018] Endpoint n Transfer Count Register */
__IO uint32_t EPCFG; /*!< [0x001c] Endpoint n Configuration Register */
__IO uint32_t EPBUFST; /*!< [0x0020] Endpoint n RAM Start Address Register */
__IO uint32_t EPBUFEND; /*!< [0x0024] Endpoint n RAM End Address Register */
} HSUSBD_EP_T;
typedef struct
{
/**
* @var HSUSBD_T::GINTSTS
* Offset: 0x00 Global Interrupt Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |USBIF |USB Interrupt
* | | |This bit conveys the interrupt status for USB specific events endpoint
* | | |When set, USB interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[1] |CEPIF |Control Endpoint Interrupt
* | | |This bit conveys the interrupt status for control endpoint
* | | |When set, Control-ep's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[2] |EPAIF |Endpoint a Interrupt
* | | |When set, the corresponding Endpoint A's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[3] |EPBIF |Endpoint B Interrupt
* | | |When set, the corresponding Endpoint B's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[4] |EPCIF |Endpoint C Interrupt
* | | |When set, the corresponding Endpoint C's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[5] |EPDIF |Endpoint D Interrupt
* | | |When set, the corresponding Endpoint D's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[6] |EPEIF |Endpoint E Interrupt
* | | |When set, the corresponding Endpoint E's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[7] |EPFIF |Endpoint F Interrupt
* | | |When set, the corresponding Endpoint F's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[8] |EPGIF |Endpoint G Interrupt
* | | |When set, the corresponding Endpoint G's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[9] |EPHIF |Endpoint H Interrupt
* | | |When set, the corresponding Endpoint H's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[10] |EPIIF |Endpoint I Interrupt
* | | |When set, the corresponding Endpoint I's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[11] |EPJIF |Endpoint J Interrupt
* | | |When set, the corresponding Endpoint J's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[12] |EPKIF |Endpoint K Interrupt
* | | |When set, the corresponding Endpoint K's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* |[13] |EPLIF |Endpoint L Interrupt
* | | |When set, the corresponding Endpoint L's interrupt status register should be read to determine the cause of the interrupt.
* | | |0 = No interrupt event occurred.
* | | |1 = The related interrupt event is occurred.
* @var HSUSBD_T::GINTEN
* Offset: 0x08 Global Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |USBIEN |USB Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be generated when a USB event occurs on the bus.
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[1] |CEPIEN |Control Endpoint Interrupt Enable Bit
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the control endpoint.
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[2] |EPAIEN |Interrupt Enable Control for Endpoint a
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint A.
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[3] |EPBIEN |Interrupt Enable Control for Endpoint B
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint B
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[4] |EPCIEN |Interrupt Enable Control for Endpoint C
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint C
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[5] |EPDIEN |Interrupt Enable Control for Endpoint D
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint D
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[6] |EPEIEN |Interrupt Enable Control for Endpoint E
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint E
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[7] |EPFIEN |Interrupt Enable Control for Endpoint F
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint F
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[8] |EPGIEN |Interrupt Enable Control for Endpoint G
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint G
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[9] |EPHIEN |Interrupt Enable Control for Endpoint H
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint H
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[10] |EPIIEN |Interrupt Enable Control for Endpoint I
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint I
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[11] |EPJIEN |Interrupt Enable Control for Endpoint J
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint J
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[12] |EPKIEN |Interrupt Enable Control for Endpoint K
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint K
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* |[13] |EPLIEN |Interrupt Enable Control for Endpoint L
* | | |When set, this bit enables a local interrupt to be generated when an interrupt is pending for the endpoint L
* | | |0 = The related interrupt Disabled.
* | | |1 = The related interrupt Enabled.
* @var HSUSBD_T::BUSINTSTS
* Offset: 0x10 USB Bus Interrupt Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SOFIF |SOF Receive Control
* | | |This bit indicates when a start-of-frame packet has been received.
* | | |0 = No start-of-frame packet has been received.
* | | |1 = Start-of-frame packet has been received.
* | | |Note: Write 1 to clear this bit to 0.
* |[1] |RSTIF |Reset Status
* | | |When set, this bit indicates that either the USB root port reset is end.
* | | |0 = No USB root port reset is end.
* | | |1 = USB root port reset is end.
* | | |Note: Write 1 to clear this bit to 0.
* |[2] |RESUMEIF |Resume
* | | |When set, this bit indicates that a device resume has occurred.
* | | |0 = No device resume has occurred.
* | | |1 = Device resume has occurred.
* | | |Note: Write 1 to clear this bit to 0.
* |[3] |SUSPENDIF |Suspend Request
* | | |This bit is set as default and it has to be cleared by writing '1' before the USB reset
* | | |This bit is also set when a USB Suspend request is detected from the host.
* | | |0 = No USB Suspend request is detected from the host.
* | | |1= USB Suspend request is detected from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[4] |HISPDIF |High-speed Settle
* | | |0 = No valid high-speed reset protocol is detected.
* | | |1 = Valid high-speed reset protocol is over and the device has settled in high-speed.
* | | |Note: Write 1 to clear this bit to 0.
* |[5] |DMADONEIF |DMA Completion Interrupt
* | | |0 = No DMA transfer over.
* | | |1 = DMA transfer is over.
* | | |Note: Write 1 to clear this bit to 0.
* |[6] |PHYCLKVLDIF|Usable Clock Interrupt
* | | |0 = Usable clock is not available.
* | | |1 = Usable clock is available from the transceiver.
* | | |Note: Write 1 to clear this bit to 0.
* |[8] |VBUSDETIF |VBUS Detection Interrupt Status
* | | |0 = No VBUS is plug-in.
* | | |1 = VBUS is plug-in.
* | | |Note: Write 1 to clear this bit to 0.
* @var HSUSBD_T::BUSINTEN
* Offset: 0x14 USB Bus Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SOFIEN |SOF Interrupt
* | | |This bit enables the SOF interrupt.
* | | |0 = SOF interrupt Disabled.
* | | |1 = SOF interrupt Enabled.
* |[1] |RSTIEN |Reset Status
* | | |This bit enables the USB-Reset interrupt.
* | | |0 = USB-Reset interrupt Disabled.
* | | |1 = USB-Reset interrupt Enabled.
* |[2] |RESUMEIEN |Resume
* | | |This bit enables the Resume interrupt.
* | | |0 = Resume interrupt Disabled.
* | | |1 = Resume interrupt Enabled.
* |[3] |SUSPENDIEN|Suspend Request
* | | |This bit enables the Suspend interrupt.
* | | |0 = Suspend interrupt Disabled.
* | | |1 = Suspend interrupt Enabled.
* |[4] |HISPDIEN |High-speed Settle
* | | |This bit enables the high-speed settle interrupt.
* | | |0 = High-speed settle interrupt Disabled.
* | | |1 = High-speed settle interrupt Enabled.
* |[5] |DMADONEIEN|DMA Completion Interrupt
* | | |This bit enables the DMA completion interrupt
* | | |0 = DMA completion interrupt Disabled.
* | | |1 = DMA completion interrupt Enabled.
* |[6] |PHYCLKVLDIEN|Usable Clock Interrupt
* | | |This bit enables the usable clock interrupt.
* | | |0 = Usable clock interrupt Disabled.
* | | |1 = Usable clock interrupt Enabled.
* |[8] |VBUSDETIEN|VBUS Detection Interrupt Enable Bit
* | | |This bit enables the VBUS floating detection interrupt.
* | | |0 = VBUS floating detection interrupt Disabled.
* | | |1 = VBUS floating detection interrupt Enabled.
* @var HSUSBD_T::OPER
* Offset: 0x18 USB Operational Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |RESUMEEN |Generate Resume
* | | |0 = No Resume sequence to be initiated to the host.
* | | |1 = A Resume sequence to be initiated to the host if device remote wakeup is enabled
* | | |This bit is self-clearing.
* |[1] |HISPDEN |USB High-speed
* | | |0 = The USB device controller to suppress the chirp-sequence during reset protocol, thereby allowing the USB device controller to settle in full-speed, even though it is connected to a USB2.0 Host.
* | | |1 = The USB device controller to initiate a chirp-sequence during reset protocol.
* |[2] |CURSPD |USB Current Speed
* | | |0 = The device has settled in Full Speed.
* | | |1 = The USB device controller has settled in High-speed.
* @var HSUSBD_T::FRAMECNT
* Offset: 0x1C USB Frame Count Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[2:0] |MFRAMECNT |Micro-frame Counter
* | | |This field contains the micro-frame number for the frame number in the frame counter field.
* |[13:3] |FRAMECNT |Frame Counter
* | | |This field contains the frame count from the most recent start-of-frame packet.
* @var HSUSBD_T::FADDR
* Offset: 0x20 USB Function Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[6:0] |FADDR |USB Function Address
* | | |This field contains the current USB address of the device
* | | |This field is cleared when a root port reset is detected
* @var HSUSBD_T::TEST
* Offset: 0x24 USB Test Mode Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[2:0] |TESTMODE |Test Mode Selection
* | | |000 = Normal Operation.
* | | |001 = Test_J.
* | | |010 = Test_K.
* | | |011 = Test_SE0_NAK.
* | | |100 = Test_Packet.
* | | |101 = Test_Force_Enable.
* | | |110 = Reserved.
* | | |111 = Reserved.
* | | |Note: This field is cleared when root port reset is detected.
* @var HSUSBD_T::CEPDAT
* Offset: 0x28 Control-Endpoint Data Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[31:0] |DAT |Control-endpoint Data Buffer
* | | |Control endpoint data buffer for the buffer transaction (read or write).
* | | |Note: Only word access is supported.
* @var HSUSBD_T::CEPDAT_BYTE
* Offset: 0x28 Control-Endpoint Data Buffer
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DAT |Control-endpoint Data Buffer
* | | |Control endpoint data buffer for the buffer transaction (read or write).
* | | |Note: Only byte access is supported.
* @var HSUSBD_T::CEPCTL
* Offset: 0x2C Control-Endpoint Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |NAKCLR |No Acknowledge Control
* | | |This bit plays a crucial role in any control transfer.
* | | |0 = The bit is being cleared by the local CPU by writing zero, the USB device controller will be responding with NAKs for the subsequent status phase
* | | |This mechanism holds the host from moving to the next request, until the local CPU is also ready to process the next request.
* | | |1 = This bit is set to one by the USB device controller, whenever a setup token is received
* | | |The local CPU can take its own time to finish off any house-keeping work based on the request and then clear this bit.
* | | |Note: Only when CPU writes data[1:0] is 2'b10 or 2'b00, this bit can be updated.
* |[1] |STALLEN |Stall Enable Bit
* | | |When this stall bit is set, the control endpoint sends a stall handshake in response to any in or out token thereafter
* | | |This is typically used for response to invalid/unsupported requests
* | | |When this bit is being set the NAK clear bit has to be cleared at the same time since the NAK clear bit has highest priority than STALL
* | | |It is automatically cleared on receipt of a next setup-token
* | | |So, the local CPU need not write again to clear this bit.
* | | |0 = No sends a stall handshake in response to any in or out token thereafter.
* | | |1 = The control endpoint sends a stall handshake in response to any in or out token thereafter.
* | | |Note: Only when CPU writes data[1:0] is 2'b10 or 2'b00, this bit can be updated.
* |[2] |ZEROLEN |Zero Packet Length
* | | |This bit is valid for Auto Validation mode only.
* | | |0 = No zero length packet to the host during Data stage to an IN token.
* | | |1 = USB device controller can send a zero length packet to the host during Data stage to an IN token
* | | |This bit gets cleared once the zero length data packet is sent
* | | |So, the local CPU need not write again to clear this bit.
* |[3] |FLUSH |CEP-flush Bit
* | | |0 = No the packet buffer and its corresponding USBD_CEPDATCNT register to be cleared.
* | | |1 = The packet buffer and its corresponding USBD_CEPDATCNT register to be cleared
* | | |This bit is self-cleaning.
* @var HSUSBD_T::CEPINTEN
* Offset: 0x30 Control-Endpoint Interrupt Enable
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SETUPTKIEN|Setup Token Interrupt Enable Bit
* | | |0 = The SETUP token interrupt in Control Endpoint Disabled.
* | | |1 = The SETUP token interrupt in Control Endpoint Enabled.
* |[1] |SETUPPKIEN|Setup Packet Interrupt
* | | |0 = The SETUP packet interrupt in Control Endpoint Disabled.
* | | |1 = The SETUP packet interrupt in Control Endpoint Enabled.
* |[2] |OUTTKIEN |Out Token Interrupt
* | | |0 = The OUT token interrupt in Control Endpoint Disabled.
* | | |1 = The OUT token interrupt in Control Endpoint Enabled.
* |[3] |INTKIEN |In Token Interrupt
* | | |0 = The IN token interrupt in Control Endpoint Disabled.
* | | |1 = The IN token interrupt in Control Endpoint Enabled.
* |[4] |PINGIEN |Ping Token Interrupt
* | | |0 = The ping token interrupt in Control Endpoint Disabled.
* | | |1 = The ping token interrupt Control Endpoint Enabled.
* |[5] |TXPKIEN |Data Packet Transmitted Interrupt
* | | |0 = The data packet transmitted interrupt in Control Endpoint Disabled.
* | | |1 = The data packet transmitted interrupt in Control Endpoint Enabled.
* |[6] |RXPKIEN |Data Packet Received Interrupt
* | | |0 = The data received interrupt in Control Endpoint Disabled.
* | | |1 = The data received interrupt in Control Endpoint Enabled.
* |[7] |NAKIEN |NAK Sent Interrupt
* | | |0 = The NAK sent interrupt in Control Endpoint Disabled.
* | | |1 = The NAK sent interrupt in Control Endpoint Enabled.
* |[8] |STALLIEN |STALL Sent Interrupt
* | | |0 = The STALL sent interrupt in Control Endpoint Disabled.
* | | |1 = The STALL sent interrupt in Control Endpoint Enabled.
* |[9] |ERRIEN |USB Error Interrupt
* | | |0 = The USB Error interrupt in Control Endpoint Disabled.
* | | |1 = The USB Error interrupt in Control Endpoint Enabled.
* |[10] |STSDONEIEN|Status Completion Interrupt
* | | |0 = The Status Completion interrupt in Control Endpoint Disabled.
* | | |1 = The Status Completion interrupt in Control Endpoint Enabled.
* |[11] |BUFFULLIEN|Buffer Full Interrupt
* | | |0 = The buffer full interrupt in Control Endpoint Disabled.
* | | |1 = The buffer full interrupt in Control Endpoint Enabled.
* |[12] |BUFEMPTYIEN|Buffer Empty Interrupt
* | | |0 = The buffer empty interrupt in Control Endpoint Disabled.
* | | |1= The buffer empty interrupt in Control Endpoint Enabled.
* @var HSUSBD_T::CEPINTSTS
* Offset: 0x34 Control-Endpoint Interrupt Status
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SETUPTKIF |Setup Token Interrupt
* | | |0 = Not a Setup token is received.
* | | |1 = A Setup token is received. Writing 1 clears this status bit
* | | |Note: Write 1 to clear this bit to 0.
* |[1] |SETUPPKIF |Setup Packet Interrupt
* | | |This bit must be cleared (by writing 1) before the next setup packet can be received
* | | |If the bit is not cleared, then the successive setup packets will be overwritten in the setup packet buffer.
* | | |0 = Not a Setup packet has been received from the host.
* | | |1 = A Setup packet has been received from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[2] |OUTTKIF |Out Token Interrupt
* | | |0 = The control-endpoint does not received an OUT token from the host.
* | | |1 = The control-endpoint receives an OUT token from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[3] |INTKIF |in Token Interrupt
* | | |0 = The control-endpoint does not received an IN token from the host.
* | | |1 = The control-endpoint receives an IN token from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[4] |PINGIF |Ping Token Interrupt
* | | |0 = The control-endpoint does not received a ping token from the host.
* | | |1 = The control-endpoint receives a ping token from the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[5] |TXPKIF |Data Packet Transmitted Interrupt
* | | |0 = Not a data packet is successfully transmitted to the host in response to an IN-token and an ACK-token is received for the same.
* | | |1 = A data packet is successfully transmitted to the host in response to an IN-token and an ACK-token is received for the same.
* | | |Note: Write 1 to clear this bit to 0.
* |[6] |RXPKIF |Data Packet Received Interrupt
* | | |0 = Not a data packet is successfully received from the host for an OUT-token and an ACK is sent to the host.
* | | |1 = A data packet is successfully received from the host for an OUT-token and an ACK is sent to the host.
* | | |Note: Write 1 to clear this bit to 0.
* |[7] |NAKIF |NAK Sent Interrupt
* | | |0 = Not a NAK-token is sent in response to an IN/OUT token.
* | | |1 = A NAK-token is sent in response to an IN/OUT token.
* | | |Note: Write 1 to clear this bit to 0.
* |[8] |STALLIF |STALL Sent Interrupt
* | | |0 = Not a stall-token is sent in response to an IN/OUT token.
* | | |1 = A stall-token is sent in response to an IN/OUT token.
* | | |Note: Write 1 to clear this bit to 0.
* |[9] |ERRIF |USB Error Interrupt
* | | |0 = No error had occurred during the transaction.
* | | |1 = An error had occurred during the transaction.
* | | |Note: Write 1 to clear this bit to 0.
* |[10] |STSDONEIF |Status Completion Interrupt
* | | |0 = Not a USB transaction has completed successfully.
* | | |1 = The status stage of a USB transaction has completed successfully.
* | | |Note: Write 1 to clear this bit to 0.
* |[11] |BUFFULLIF |Buffer Full Interrupt
* | | |0 = The control-endpoint buffer is not full.
* | | |1 = The control-endpoint buffer is full.
* | | |Note: Write 1 to clear this bit to 0.
* |[12] |BUFEMPTYIF|Buffer Empty Interrupt
* | | |0 = The control-endpoint buffer is not empty.
* | | |1 = The control-endpoint buffer is empty.
* | | |Note: Write 1 to clear this bit to 0.
* @var HSUSBD_T::CEPTXCNT
* Offset: 0x38 Control-Endpoint In-transfer Data Count
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |TXCNT |In-transfer Data Count
* | | |There is no mode selection for the control endpoint (but it operates like manual mode).The local-CPU has to fill the control-endpoint buffer with the data to be sent for an in-token and to write the count of bytes in this register
* | | |When zero is written into this field, a zero length packet is sent to the host
* | | |When the count written in the register is more than the MPS, the data sent will be of only MPS.
* @var HSUSBD_T::CEPRXCNT
* Offset: 0x3C Control-Endpoint Out-transfer Data Count
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |RXCNT |Out-transfer Data Count
* | | |The USB device controller maintains the count of the data received in case of an out transfer, during the control transfer.
* @var HSUSBD_T::CEPDATCNT
* Offset: 0x40 Control-Endpoint data count
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[15:0] |DATCNT |Control-endpoint Data Count
* | | |The USB device controller maintains the count of the data of control-endpoint.
* @var HSUSBD_T::SETUP1_0
* Offset: 0x44 Setup1 & Setup0 bytes
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |SETUP0 |Setup Byte 0[7:0]
* | | |This register provides byte 0 of the last setup packet received
* | | |For a Standard Device Request, the following bmRequestType information is returned.
* | | |Bit 7(Direction):
* | | | 0: Host to device
* | | | 1: Device to host
* | | |Bit 6-5 (Type):
* | | | 00: Standard
* | | | 01: Class
* | | | 10: Vendor
* | | | 11: Reserved
* | | |Bit 4-0 (Recipient)
* | | | 00000: Device
* | | | 00001: Interface
* | | | 00010: Endpoint
* | | | 00011: Other
* | | | Others: Reserved
* |[15:8] |SETUP1 |Setup Byte 1[15:8]
* | | |This register provides byte 1 of the last setup packet received
* | | |For a Standard Device Request, the following bRequest Code information is returned.
* | | |00000000 = Get Status.
* | | |00000001 = Clear Feature.
* | | |00000010 = Reserved.
* | | |00000011 = Set Feature.
* | | |00000100 = Reserved.
* | | |00000101 = Set Address.
* | | |00000110 = Get Descriptor.
* | | |00000111 = Set Descriptor.
* | | |00001000 = Get Configuration.
* | | |00001001 = Set Configuration.
* | | |00001010 = Get Interface.
* | | |00001011 = Set Interface.
* | | |00001100 = Sync Frame.
* @var HSUSBD_T::SETUP3_2
* Offset: 0x48 Setup3 & Setup2 Bytes
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |SETUP2 |Setup Byte 2 [7:0]
* | | |This register provides byte 2 of the last setup packet received
* | | |For a Standard Device Request, the least significant byte of the wValue field is returned
* |[15:8] |SETUP3 |Setup Byte 3 [15:8]
* | | |This register provides byte 3 of the last setup packet received
* | | |For a Standard Device Request, the most significant byte of the wValue field is returned.
* @var HSUSBD_T::SETUP5_4
* Offset: 0x4C Setup5 & Setup4 Bytes
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |SETUP4 |Setup Byte 4[7:0]
* | | |This register provides byte 4 of the last setup packet received
* | | |For a Standard Device Request, the least significant byte of the wIndex is returned.
* |[15:8] |SETUP5 |Setup Byte 5[15:8]
* | | |This register provides byte 5 of the last setup packet received
* | | |For a Standard Device Request, the most significant byte of the wIndex field is returned.
* @var HSUSBD_T::SETUP7_6
* Offset: 0x50 Setup7 & Setup6 Bytes
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |SETUP6 |Setup Byte 6[7:0]
* | | |This register provides byte 6 of the last setup packet received
* | | |For a Standard Device Request, the least significant byte of the wLength field is returned.
* |[15:8] |SETUP7 |Setup Byte 7[15:8]
* | | |This register provides byte 7 of the last setup packet received
* | | |For a Standard Device Request, the most significant byte of the wLength field is returned.
* @var HSUSBD_T::CEPBUFST
* Offset: 0x54 Control Endpoint RAM Start Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |SADDR |Control-endpoint Start Address
* | | |This is the start-address of the RAM space allocated for the control-endpoint.
* @var HSUSBD_T::CEPBUFEND
* Offset: 0x58 Control Endpoint RAM End Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[11:0] |EADDR |Control-endpoint End Address
* | | |This is the end-address of the RAM space allocated for the control-endpoint.
* @var HSUSBD_T::DMACTL
* Offset: 0x5C DMA Control Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |EPNUM |DMA Endpoint Address Bits
* | | |Used to define the Endpoint Address
* |[4] |DMARD |DMA Operation
* | | |0 : The operation is a DMA write (read from USB buffer)
* | | |DMA will check endpoint data available count (USBD_EPxDATCNT) according to EPNM setting before to perform DMA write operation.
* | | |1 : The operation is a DMA read (write to USB buffer).
* |[5] |DMAEN |DMA Enable Bit
* | | |0 : DMA function Disabled.
* | | |1 : DMA function Enabled.
* |[6] |SGEN |Scatter Gather Function Enable Bit
* | | |0 : Scatter gather function Disabled.
* | | |1 : Scatter gather function Enabled.
* |[7] |DMARST |Reset DMA State Machine
* | | |0 : No reset the DMA state machine.
* | | |1 : Reset the DMA state machine.
* |[8] |SVINEP |Serve IN Endpoint
* | | |This bit is used to specify DMA serving endpoint-IN endpoint or OUT endpoint.
* | | |0: DMA serves OUT endpoint
* | | |1: DMA serves IN endpoint
* @var HSUSBD_T::DMACNT
* Offset: 0x60 DMA Count Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[19:0] |DMACNT |DMA Transfer Count
* | | |The transfer count of the DMA operation to be performed is written to this register.
* @var HSUSBD_T::DMAADDR
* Offset: 0x700 AHB DMA Address Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[31:0] |DMAADDR |DMAADDR
* | | |The register specifies the address from which the DMA has to read / write
* | | |The address must WORD (32-bit) aligned.
* @var HSUSBD_T::PHYCTL
* Offset: 0x704 USB PHY Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[8] |DPPUEN |DP Pull-up
* | | |0 = Pull-up resistor on D+ Disabled.
* | | |1 = Pull-up resistor on D+ Enabled.
* |[9] |PHYEN |PHY Suspend Enable Bit
* | | |0 = The USB PHY is suspend.
* | | |1 = The USB PHY is not suspend.
* |[24] |VBUSWKEN |Wake-up Enable Bit
* | | |0 = The wake-up function Disabled.
* | | |1 = The wake-up function Enabled.
* |[31] |VBUSDET |VBUS Status
* | | |0 = The VBUS is not detected yet.
* | | |1 = The VBUS is detected.
*/
__I uint32_t GINTSTS; /*!< [0x0000] Global Interrupt Status Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE0[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t GINTEN; /*!< [0x0008] Global Interrupt Enable Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE1[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t BUSINTSTS; /*!< [0x0010] USB Bus Interrupt Status Register */
__IO uint32_t BUSINTEN; /*!< [0x0014] USB Bus Interrupt Enable Register */
__IO uint32_t OPER; /*!< [0x0018] USB Operational Register */
__I uint32_t FRAMECNT; /*!< [0x001c] USB Frame Count Register */
__IO uint32_t FADDR; /*!< [0x0020] USB Function Address Register */
__IO uint32_t TEST; /*!< [0x0024] USB Test Mode Register */
union
{
__IO uint32_t CEPDAT;
__IO uint8_t CEPDAT_BYTE;
}; /*!< [0x0028] Control-Endpoint Data Buffer */
__IO uint32_t CEPCTL; /*!< [0x002c] Control-Endpoint Control Register */
__IO uint32_t CEPINTEN; /*!< [0x0030] Control-Endpoint Interrupt Enable */
__IO uint32_t CEPINTSTS; /*!< [0x0034] Control-Endpoint Interrupt Status */
__IO uint32_t CEPTXCNT; /*!< [0x0038] Control-Endpoint In-transfer Data Count */
__I uint32_t CEPRXCNT; /*!< [0x003c] Control-Endpoint Out-transfer Data Count */
__I uint32_t CEPDATCNT; /*!< [0x0040] Control-Endpoint data count */
__I uint32_t SETUP1_0; /*!< [0x0044] Setup1 & Setup0 bytes */
__I uint32_t SETUP3_2; /*!< [0x0048] Setup3 & Setup2 Bytes */
__I uint32_t SETUP5_4; /*!< [0x004c] Setup5 & Setup4 Bytes */
__I uint32_t SETUP7_6; /*!< [0x0050] Setup7 & Setup6 Bytes */
__IO uint32_t CEPBUFST; /*!< [0x0054] Control Endpoint RAM Start Address Register */
__IO uint32_t CEPBUFEND; /*!< [0x0058] Control Endpoint RAM End Address Register */
__IO uint32_t DMACTL; /*!< [0x005c] DMA Control Status Register */
__IO uint32_t DMACNT; /*!< [0x0060] DMA Count Register */
HSUSBD_EP_T EP[12];
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE2[301];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t BCDC; /*!< [0x06f8] Battery Charge Detect Control Register */
__IO uint32_t LPMCSR; /*!< [0x06fc] LPM Control and Status Register */
__IO uint32_t DMAADDR; /*!< [0x0700] AHB DMA Address Register */
__IO uint32_t PHYCTL; /*!< [0x0704] USB PHY Control Register */
} HSUSBD_T;
/**
@addtogroup HSUSBD_CONST HSUSBD Bit Field Definition
Constant Definitions for HSUSBD Controller
@{ */
#define HSUSBD_GINTSTS_USBIF_Pos (0) /*!< HSUSBD_T::GINTSTS: USBIF Position */
#define HSUSBD_GINTSTS_USBIF_Msk (0x1ul << HSUSBD_GINTSTS_USBIF_Pos) /*!< HSUSBD_T::GINTSTS: USBIF Mask */
#define HSUSBD_GINTSTS_CEPIF_Pos (1) /*!< HSUSBD_T::GINTSTS: CEPIF Position */
#define HSUSBD_GINTSTS_CEPIF_Msk (0x1ul << HSUSBD_GINTSTS_CEPIF_Pos) /*!< HSUSBD_T::GINTSTS: CEPIF Mask */
#define HSUSBD_GINTSTS_EPAIF_Pos (2) /*!< HSUSBD_T::GINTSTS: EPAIF Position */
#define HSUSBD_GINTSTS_EPAIF_Msk (0x1ul << HSUSBD_GINTSTS_EPAIF_Pos) /*!< HSUSBD_T::GINTSTS: EPAIF Mask */
#define HSUSBD_GINTSTS_EPBIF_Pos (3) /*!< HSUSBD_T::GINTSTS: EPBIF Position */
#define HSUSBD_GINTSTS_EPBIF_Msk (0x1ul << HSUSBD_GINTSTS_EPBIF_Pos) /*!< HSUSBD_T::GINTSTS: EPBIF Mask */
#define HSUSBD_GINTSTS_EPCIF_Pos (4) /*!< HSUSBD_T::GINTSTS: EPCIF Position */
#define HSUSBD_GINTSTS_EPCIF_Msk (0x1ul << HSUSBD_GINTSTS_EPCIF_Pos) /*!< HSUSBD_T::GINTSTS: EPCIF Mask */
#define HSUSBD_GINTSTS_EPDIF_Pos (5) /*!< HSUSBD_T::GINTSTS: EPDIF Position */
#define HSUSBD_GINTSTS_EPDIF_Msk (0x1ul << HSUSBD_GINTSTS_EPDIF_Pos) /*!< HSUSBD_T::GINTSTS: EPDIF Mask */
#define HSUSBD_GINTSTS_EPEIF_Pos (6) /*!< HSUSBD_T::GINTSTS: EPEIF Position */
#define HSUSBD_GINTSTS_EPEIF_Msk (0x1ul << HSUSBD_GINTSTS_EPEIF_Pos) /*!< HSUSBD_T::GINTSTS: EPEIF Mask */
#define HSUSBD_GINTSTS_EPFIF_Pos (7) /*!< HSUSBD_T::GINTSTS: EPFIF Position */
#define HSUSBD_GINTSTS_EPFIF_Msk (0x1ul << HSUSBD_GINTSTS_EPFIF_Pos) /*!< HSUSBD_T::GINTSTS: EPFIF Mask */
#define HSUSBD_GINTSTS_EPGIF_Pos (8) /*!< HSUSBD_T::GINTSTS: EPGIF Position */
#define HSUSBD_GINTSTS_EPGIF_Msk (0x1ul << HSUSBD_GINTSTS_EPGIF_Pos) /*!< HSUSBD_T::GINTSTS: EPGIF Mask */
#define HSUSBD_GINTSTS_EPHIF_Pos (9) /*!< HSUSBD_T::GINTSTS: EPHIF Position */
#define HSUSBD_GINTSTS_EPHIF_Msk (0x1ul << HSUSBD_GINTSTS_EPHIF_Pos) /*!< HSUSBD_T::GINTSTS: EPHIF Mask */
#define HSUSBD_GINTSTS_EPIIF_Pos (10) /*!< HSUSBD_T::GINTSTS: EPIIF Position */
#define HSUSBD_GINTSTS_EPIIF_Msk (0x1ul << HSUSBD_GINTSTS_EPIIF_Pos) /*!< HSUSBD_T::GINTSTS: EPIIF Mask */
#define HSUSBD_GINTSTS_EPJIF_Pos (11) /*!< HSUSBD_T::GINTSTS: EPJIF Position */
#define HSUSBD_GINTSTS_EPJIF_Msk (0x1ul << HSUSBD_GINTSTS_EPJIF_Pos) /*!< HSUSBD_T::GINTSTS: EPJIF Mask */
#define HSUSBD_GINTSTS_EPKIF_Pos (12) /*!< HSUSBD_T::GINTSTS: EPKIF Position */
#define HSUSBD_GINTSTS_EPKIF_Msk (0x1ul << HSUSBD_GINTSTS_EPKIF_Pos) /*!< HSUSBD_T::GINTSTS: EPKIF Mask */
#define HSUSBD_GINTSTS_EPLIF_Pos (13) /*!< HSUSBD_T::GINTSTS: EPLIF Position */
#define HSUSBD_GINTSTS_EPLIF_Msk (0x1ul << HSUSBD_GINTSTS_EPLIF_Pos) /*!< HSUSBD_T::GINTSTS: EPLIF Mask */
#define HSUSBD_GINTEN_USBIEN_Pos (0) /*!< HSUSBD_T::GINTEN: USBIEN Position */
#define HSUSBD_GINTEN_USBIEN_Msk (0x1ul << HSUSBD_GINTEN_USBIEN_Pos) /*!< HSUSBD_T::GINTEN: USBIEN Mask */
#define HSUSBD_GINTEN_CEPIEN_Pos (1) /*!< HSUSBD_T::GINTEN: CEPIEN Position */
#define HSUSBD_GINTEN_CEPIEN_Msk (0x1ul << HSUSBD_GINTEN_CEPIEN_Pos) /*!< HSUSBD_T::GINTEN: CEPIEN Mask */
#define HSUSBD_GINTEN_EPAIEN_Pos (2) /*!< HSUSBD_T::GINTEN: EPAIEN Position */
#define HSUSBD_GINTEN_EPAIEN_Msk (0x1ul << HSUSBD_GINTEN_EPAIEN_Pos) /*!< HSUSBD_T::GINTEN: EPAIEN Mask */
#define HSUSBD_GINTEN_EPBIEN_Pos (3) /*!< HSUSBD_T::GINTEN: EPBIEN Position */
#define HSUSBD_GINTEN_EPBIEN_Msk (0x1ul << HSUSBD_GINTEN_EPBIEN_Pos) /*!< HSUSBD_T::GINTEN: EPBIEN Mask */
#define HSUSBD_GINTEN_EPCIEN_Pos (4) /*!< HSUSBD_T::GINTEN: EPCIEN Position */
#define HSUSBD_GINTEN_EPCIEN_Msk (0x1ul << HSUSBD_GINTEN_EPCIEN_Pos) /*!< HSUSBD_T::GINTEN: EPCIEN Mask */
#define HSUSBD_GINTEN_EPDIEN_Pos (5) /*!< HSUSBD_T::GINTEN: EPDIEN Position */
#define HSUSBD_GINTEN_EPDIEN_Msk (0x1ul << HSUSBD_GINTEN_EPDIEN_Pos) /*!< HSUSBD_T::GINTEN: EPDIEN Mask */
#define HSUSBD_GINTEN_EPEIEN_Pos (6) /*!< HSUSBD_T::GINTEN: EPEIEN Position */
#define HSUSBD_GINTEN_EPEIEN_Msk (0x1ul << HSUSBD_GINTEN_EPEIEN_Pos) /*!< HSUSBD_T::GINTEN: EPEIEN Mask */
#define HSUSBD_GINTEN_EPFIEN_Pos (7) /*!< HSUSBD_T::GINTEN: EPFIEN Position */
#define HSUSBD_GINTEN_EPFIEN_Msk (0x1ul << HSUSBD_GINTEN_EPFIEN_Pos) /*!< HSUSBD_T::GINTEN: EPFIEN Mask */
#define HSUSBD_GINTEN_EPGIEN_Pos (8) /*!< HSUSBD_T::GINTEN: EPGIEN Position */
#define HSUSBD_GINTEN_EPGIEN_Msk (0x1ul << HSUSBD_GINTEN_EPGIEN_Pos) /*!< HSUSBD_T::GINTEN: EPGIEN Mask */
#define HSUSBD_GINTEN_EPHIEN_Pos (9) /*!< HSUSBD_T::GINTEN: EPHIEN Position */
#define HSUSBD_GINTEN_EPHIEN_Msk (0x1ul << HSUSBD_GINTEN_EPHIEN_Pos) /*!< HSUSBD_T::GINTEN: EPHIEN Mask */
#define HSUSBD_GINTEN_EPIIEN_Pos (10) /*!< HSUSBD_T::GINTEN: EPIIEN Position */
#define HSUSBD_GINTEN_EPIIEN_Msk (0x1ul << HSUSBD_GINTEN_EPIIEN_Pos) /*!< HSUSBD_T::GINTEN: EPIIEN Mask */
#define HSUSBD_GINTEN_EPJIEN_Pos (11) /*!< HSUSBD_T::GINTEN: EPJIEN Position */
#define HSUSBD_GINTEN_EPJIEN_Msk (0x1ul << HSUSBD_GINTEN_EPJIEN_Pos) /*!< HSUSBD_T::GINTEN: EPJIEN Mask */
#define HSUSBD_GINTEN_EPKIEN_Pos (12) /*!< HSUSBD_T::GINTEN: EPKIEN Position */
#define HSUSBD_GINTEN_EPKIEN_Msk (0x1ul << HSUSBD_GINTEN_EPKIEN_Pos) /*!< HSUSBD_T::GINTEN: EPKIEN Mask */
#define HSUSBD_GINTEN_EPLIEN_Pos (13) /*!< HSUSBD_T::GINTEN: EPLIEN Position */
#define HSUSBD_GINTEN_EPLIEN_Msk (0x1ul << HSUSBD_GINTEN_EPLIEN_Pos) /*!< HSUSBD_T::GINTEN: EPLIEN Mask */
#define HSUSBD_BUSINTSTS_SOFIF_Pos (0) /*!< HSUSBD_T::BUSINTSTS: SOFIF Position */
#define HSUSBD_BUSINTSTS_SOFIF_Msk (0x1ul << HSUSBD_BUSINTSTS_SOFIF_Pos) /*!< HSUSBD_T::BUSINTSTS: SOFIF Mask */
#define HSUSBD_BUSINTSTS_RSTIF_Pos (1) /*!< HSUSBD_T::BUSINTSTS: RSTIF Position */
#define HSUSBD_BUSINTSTS_RSTIF_Msk (0x1ul << HSUSBD_BUSINTSTS_RSTIF_Pos) /*!< HSUSBD_T::BUSINTSTS: RSTIF Mask */
#define HSUSBD_BUSINTSTS_RESUMEIF_Pos (2) /*!< HSUSBD_T::BUSINTSTS: RESUMEIF Position */
#define HSUSBD_BUSINTSTS_RESUMEIF_Msk (0x1ul << HSUSBD_BUSINTSTS_RESUMEIF_Pos) /*!< HSUSBD_T::BUSINTSTS: RESUMEIF Mask */
#define HSUSBD_BUSINTSTS_SUSPENDIF_Pos (3) /*!< HSUSBD_T::BUSINTSTS: SUSPENDIF Position*/
#define HSUSBD_BUSINTSTS_SUSPENDIF_Msk (0x1ul << HSUSBD_BUSINTSTS_SUSPENDIF_Pos) /*!< HSUSBD_T::BUSINTSTS: SUSPENDIF Mask */
#define HSUSBD_BUSINTSTS_HISPDIF_Pos (4) /*!< HSUSBD_T::BUSINTSTS: HISPDIF Position */
#define HSUSBD_BUSINTSTS_HISPDIF_Msk (0x1ul << HSUSBD_BUSINTSTS_HISPDIF_Pos) /*!< HSUSBD_T::BUSINTSTS: HISPDIF Mask */
#define HSUSBD_BUSINTSTS_DMADONEIF_Pos (5) /*!< HSUSBD_T::BUSINTSTS: DMADONEIF Position*/
#define HSUSBD_BUSINTSTS_DMADONEIF_Msk (0x1ul << HSUSBD_BUSINTSTS_DMADONEIF_Pos) /*!< HSUSBD_T::BUSINTSTS: DMADONEIF Mask */
#define HSUSBD_BUSINTSTS_PHYCLKVLDIF_Pos (6) /*!< HSUSBD_T::BUSINTSTS: PHYCLKVLDIF Position*/
#define HSUSBD_BUSINTSTS_PHYCLKVLDIF_Msk (0x1ul << HSUSBD_BUSINTSTS_PHYCLKVLDIF_Pos) /*!< HSUSBD_T::BUSINTSTS: PHYCLKVLDIF Mask */
#define HSUSBD_BUSINTSTS_VBUSDETIF_Pos (8) /*!< HSUSBD_T::BUSINTSTS: VBUSDETIF Position*/
#define HSUSBD_BUSINTSTS_VBUSDETIF_Msk (0x1ul << HSUSBD_BUSINTSTS_VBUSDETIF_Pos) /*!< HSUSBD_T::BUSINTSTS: VBUSDETIF Mask */
#define HSUSBD_BUSINTSTS_LPMTKNIF_Pos (9) /*!< HSUSBD_T::BUSINTSTS: LPMTKNIF Position */
#define HSUSBD_BUSINTSTS_LPMTKNIF_Msk (0x1ul << HSUSBD_BUSINTSTS_LPMTKNIF_Pos) /*!< HSUSBD_T::BUSINTSTS: LPMTKNIF Mask */
#define HSUSBD_BUSINTEN_SOFIEN_Pos (0) /*!< HSUSBD_T::BUSINTEN: SOFIEN Position */
#define HSUSBD_BUSINTEN_SOFIEN_Msk (0x1ul << HSUSBD_BUSINTEN_SOFIEN_Pos) /*!< HSUSBD_T::BUSINTEN: SOFIEN Mask */
#define HSUSBD_BUSINTEN_RSTIEN_Pos (1) /*!< HSUSBD_T::BUSINTEN: RSTIEN Position */
#define HSUSBD_BUSINTEN_RSTIEN_Msk (0x1ul << HSUSBD_BUSINTEN_RSTIEN_Pos) /*!< HSUSBD_T::BUSINTEN: RSTIEN Mask */
#define HSUSBD_BUSINTEN_RESUMEIEN_Pos (2) /*!< HSUSBD_T::BUSINTEN: RESUMEIEN Position */
#define HSUSBD_BUSINTEN_RESUMEIEN_Msk (0x1ul << HSUSBD_BUSINTEN_RESUMEIEN_Pos) /*!< HSUSBD_T::BUSINTEN: RESUMEIEN Mask */
#define HSUSBD_BUSINTEN_SUSPENDIEN_Pos (3) /*!< HSUSBD_T::BUSINTEN: SUSPENDIEN Position*/
#define HSUSBD_BUSINTEN_SUSPENDIEN_Msk (0x1ul << HSUSBD_BUSINTEN_SUSPENDIEN_Pos) /*!< HSUSBD_T::BUSINTEN: SUSPENDIEN Mask */
#define HSUSBD_BUSINTEN_HISPDIEN_Pos (4) /*!< HSUSBD_T::BUSINTEN: HISPDIEN Position */
#define HSUSBD_BUSINTEN_HISPDIEN_Msk (0x1ul << HSUSBD_BUSINTEN_HISPDIEN_Pos) /*!< HSUSBD_T::BUSINTEN: HISPDIEN Mask */
#define HSUSBD_BUSINTEN_DMADONEIEN_Pos (5) /*!< HSUSBD_T::BUSINTEN: DMADONEIEN Position*/
#define HSUSBD_BUSINTEN_DMADONEIEN_Msk (0x1ul << HSUSBD_BUSINTEN_DMADONEIEN_Pos) /*!< HSUSBD_T::BUSINTEN: DMADONEIEN Mask */
#define HSUSBD_BUSINTEN_PHYCLKVLDIEN_Pos (6) /*!< HSUSBD_T::BUSINTEN: PHYCLKVLDIEN Position*/
#define HSUSBD_BUSINTEN_PHYCLKVLDIEN_Msk (0x1ul << HSUSBD_BUSINTEN_PHYCLKVLDIEN_Pos) /*!< HSUSBD_T::BUSINTEN: PHYCLKVLDIEN Mask */
#define HSUSBD_BUSINTEN_VBUSDETIEN_Pos (8) /*!< HSUSBD_T::BUSINTEN: VBUSDETIEN Position*/
#define HSUSBD_BUSINTEN_VBUSDETIEN_Msk (0x1ul << HSUSBD_BUSINTEN_VBUSDETIEN_Pos) /*!< HSUSBD_T::BUSINTEN: VBUSDETIEN Mask */
#define HSUSBD_BUSINTEN_LPMTKNIEN_Pos (9) /*!< HSUSBD_T::BUSINTEN: LPMTKNIEN Position */
#define HSUSBD_BUSINTEN_LPMTKNIEN_Msk (0x1ul << HSUSBD_BUSINTEN_LPMTKNIEN_Pos) /*!< HSUSBD_T::BUSINTEN: LPMTKNIEN Mask */
#define HSUSBD_OPER_RESUMEEN_Pos (0) /*!< HSUSBD_T::OPER: RESUMEEN Position */
#define HSUSBD_OPER_RESUMEEN_Msk (0x1ul << HSUSBD_OPER_RESUMEEN_Pos) /*!< HSUSBD_T::OPER: RESUMEEN Mask */
#define HSUSBD_OPER_HISPDEN_Pos (1) /*!< HSUSBD_T::OPER: HISPDEN Position */
#define HSUSBD_OPER_HISPDEN_Msk (0x1ul << HSUSBD_OPER_HISPDEN_Pos) /*!< HSUSBD_T::OPER: HISPDEN Mask */
#define HSUSBD_OPER_CURSPD_Pos (2) /*!< HSUSBD_T::OPER: CURSPD Position */
#define HSUSBD_OPER_CURSPD_Msk (0x1ul << HSUSBD_OPER_CURSPD_Pos) /*!< HSUSBD_T::OPER: CURSPD Mask */
#define HSUSBD_FRAMECNT_MFRAMECNT_Pos (0) /*!< HSUSBD_T::FRAMECNT: MFRAMECNT Position */
#define HSUSBD_FRAMECNT_MFRAMECNT_Msk (0x7ul << HSUSBD_FRAMECNT_MFRAMECNT_Pos) /*!< HSUSBD_T::FRAMECNT: MFRAMECNT Mask */
#define HSUSBD_FRAMECNT_FRAMECNT_Pos (3) /*!< HSUSBD_T::FRAMECNT: FRAMECNT Position */
#define HSUSBD_FRAMECNT_FRAMECNT_Msk (0x7fful << HSUSBD_FRAMECNT_FRAMECNT_Pos) /*!< HSUSBD_T::FRAMECNT: FRAMECNT Mask */
#define HSUSBD_FADDR_FADDR_Pos (0) /*!< HSUSBD_T::FADDR: FADDR Position */
#define HSUSBD_FADDR_FADDR_Msk (0x7ful << HSUSBD_FADDR_FADDR_Pos) /*!< HSUSBD_T::FADDR: FADDR Mask */
#define HSUSBD_TEST_TESTMODE_Pos (0) /*!< HSUSBD_T::TEST: TESTMODE Position */
#define HSUSBD_TEST_TESTMODE_Msk (0x7ul << HSUSBD_TEST_TESTMODE_Pos) /*!< HSUSBD_T::TEST: TESTMODE Mask */
#define HSUSBD_CEPDAT_DAT_Pos (0) /*!< HSUSBD_T::CEPDAT: DAT Position */
#define HSUSBD_CEPDAT_DAT_Msk (0xfffffffful << HSUSBD_CEPDAT_DAT_Pos) /*!< HSUSBD_T::CEPDAT: DAT Mask */
#define HSUSBD_CEPCTL_NAKCLR_Pos (0) /*!< HSUSBD_T::CEPCTL: NAKCLR Position */
#define HSUSBD_CEPCTL_NAKCLR_Msk (0x1ul << HSUSBD_CEPCTL_NAKCLR_Pos) /*!< HSUSBD_T::CEPCTL: NAKCLR Mask */
#define HSUSBD_CEPCTL_STALLEN_Pos (1) /*!< HSUSBD_T::CEPCTL: STALLEN Position */
#define HSUSBD_CEPCTL_STALLEN_Msk (0x1ul << HSUSBD_CEPCTL_STALLEN_Pos) /*!< HSUSBD_T::CEPCTL: STALLEN Mask */
#define HSUSBD_CEPCTL_ZEROLEN_Pos (2) /*!< HSUSBD_T::CEPCTL: ZEROLEN Position */
#define HSUSBD_CEPCTL_ZEROLEN_Msk (0x1ul << HSUSBD_CEPCTL_ZEROLEN_Pos) /*!< HSUSBD_T::CEPCTL: ZEROLEN Mask */
#define HSUSBD_CEPCTL_FLUSH_Pos (3) /*!< HSUSBD_T::CEPCTL: FLUSH Position */
#define HSUSBD_CEPCTL_FLUSH_Msk (0x1ul << HSUSBD_CEPCTL_FLUSH_Pos) /*!< HSUSBD_T::CEPCTL: FLUSH Mask */
#define HSUSBD_CEPINTEN_SETUPTKIEN_Pos (0) /*!< HSUSBD_T::CEPINTEN: SETUPTKIEN Position*/
#define HSUSBD_CEPINTEN_SETUPTKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_SETUPTKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: SETUPTKIEN Mask */
#define HSUSBD_CEPINTEN_SETUPPKIEN_Pos (1) /*!< HSUSBD_T::CEPINTEN: SETUPPKIEN Position*/
#define HSUSBD_CEPINTEN_SETUPPKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_SETUPPKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: SETUPPKIEN Mask */
#define HSUSBD_CEPINTEN_OUTTKIEN_Pos (2) /*!< HSUSBD_T::CEPINTEN: OUTTKIEN Position */
#define HSUSBD_CEPINTEN_OUTTKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_OUTTKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: OUTTKIEN Mask */
#define HSUSBD_CEPINTEN_INTKIEN_Pos (3) /*!< HSUSBD_T::CEPINTEN: INTKIEN Position */
#define HSUSBD_CEPINTEN_INTKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_INTKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: INTKIEN Mask */
#define HSUSBD_CEPINTEN_PINGIEN_Pos (4) /*!< HSUSBD_T::CEPINTEN: PINGIEN Position */
#define HSUSBD_CEPINTEN_PINGIEN_Msk (0x1ul << HSUSBD_CEPINTEN_PINGIEN_Pos) /*!< HSUSBD_T::CEPINTEN: PINGIEN Mask */
#define HSUSBD_CEPINTEN_TXPKIEN_Pos (5) /*!< HSUSBD_T::CEPINTEN: TXPKIEN Position */
#define HSUSBD_CEPINTEN_TXPKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_TXPKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: TXPKIEN Mask */
#define HSUSBD_CEPINTEN_RXPKIEN_Pos (6) /*!< HSUSBD_T::CEPINTEN: RXPKIEN Position */
#define HSUSBD_CEPINTEN_RXPKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_RXPKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: RXPKIEN Mask */
#define HSUSBD_CEPINTEN_NAKIEN_Pos (7) /*!< HSUSBD_T::CEPINTEN: NAKIEN Position */
#define HSUSBD_CEPINTEN_NAKIEN_Msk (0x1ul << HSUSBD_CEPINTEN_NAKIEN_Pos) /*!< HSUSBD_T::CEPINTEN: NAKIEN Mask */
#define HSUSBD_CEPINTEN_STALLIEN_Pos (8) /*!< HSUSBD_T::CEPINTEN: STALLIEN Position */
#define HSUSBD_CEPINTEN_STALLIEN_Msk (0x1ul << HSUSBD_CEPINTEN_STALLIEN_Pos) /*!< HSUSBD_T::CEPINTEN: STALLIEN Mask */
#define HSUSBD_CEPINTEN_ERRIEN_Pos (9) /*!< HSUSBD_T::CEPINTEN: ERRIEN Position */
#define HSUSBD_CEPINTEN_ERRIEN_Msk (0x1ul << HSUSBD_CEPINTEN_ERRIEN_Pos) /*!< HSUSBD_T::CEPINTEN: ERRIEN Mask */
#define HSUSBD_CEPINTEN_STSDONEIEN_Pos (10) /*!< HSUSBD_T::CEPINTEN: STSDONEIEN Position*/
#define HSUSBD_CEPINTEN_STSDONEIEN_Msk (0x1ul << HSUSBD_CEPINTEN_STSDONEIEN_Pos) /*!< HSUSBD_T::CEPINTEN: STSDONEIEN Mask */
#define HSUSBD_CEPINTEN_BUFFULLIEN_Pos (11) /*!< HSUSBD_T::CEPINTEN: BUFFULLIEN Position*/
#define HSUSBD_CEPINTEN_BUFFULLIEN_Msk (0x1ul << HSUSBD_CEPINTEN_BUFFULLIEN_Pos) /*!< HSUSBD_T::CEPINTEN: BUFFULLIEN Mask */
#define HSUSBD_CEPINTEN_BUFEMPTYIEN_Pos (12) /*!< HSUSBD_T::CEPINTEN: BUFEMPTYIEN Position*/
#define HSUSBD_CEPINTEN_BUFEMPTYIEN_Msk (0x1ul << HSUSBD_CEPINTEN_BUFEMPTYIEN_Pos) /*!< HSUSBD_T::CEPINTEN: BUFEMPTYIEN Mask */
#define HSUSBD_CEPINTSTS_SETUPTKIF_Pos (0) /*!< HSUSBD_T::CEPINTSTS: SETUPTKIF Position*/
#define HSUSBD_CEPINTSTS_SETUPTKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_SETUPTKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: SETUPTKIF Mask */
#define HSUSBD_CEPINTSTS_SETUPPKIF_Pos (1) /*!< HSUSBD_T::CEPINTSTS: SETUPPKIF Position*/
#define HSUSBD_CEPINTSTS_SETUPPKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_SETUPPKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: SETUPPKIF Mask */
#define HSUSBD_CEPINTSTS_OUTTKIF_Pos (2) /*!< HSUSBD_T::CEPINTSTS: OUTTKIF Position */
#define HSUSBD_CEPINTSTS_OUTTKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_OUTTKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: OUTTKIF Mask */
#define HSUSBD_CEPINTSTS_INTKIF_Pos (3) /*!< HSUSBD_T::CEPINTSTS: INTKIF Position */
#define HSUSBD_CEPINTSTS_INTKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_INTKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: INTKIF Mask */
#define HSUSBD_CEPINTSTS_PINGIF_Pos (4) /*!< HSUSBD_T::CEPINTSTS: PINGIF Position */
#define HSUSBD_CEPINTSTS_PINGIF_Msk (0x1ul << HSUSBD_CEPINTSTS_PINGIF_Pos) /*!< HSUSBD_T::CEPINTSTS: PINGIF Mask */
#define HSUSBD_CEPINTSTS_TXPKIF_Pos (5) /*!< HSUSBD_T::CEPINTSTS: TXPKIF Position */
#define HSUSBD_CEPINTSTS_TXPKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_TXPKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: TXPKIF Mask */
#define HSUSBD_CEPINTSTS_RXPKIF_Pos (6) /*!< HSUSBD_T::CEPINTSTS: RXPKIF Position */
#define HSUSBD_CEPINTSTS_RXPKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_RXPKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: RXPKIF Mask */
#define HSUSBD_CEPINTSTS_NAKIF_Pos (7) /*!< HSUSBD_T::CEPINTSTS: NAKIF Position */
#define HSUSBD_CEPINTSTS_NAKIF_Msk (0x1ul << HSUSBD_CEPINTSTS_NAKIF_Pos) /*!< HSUSBD_T::CEPINTSTS: NAKIF Mask */
#define HSUSBD_CEPINTSTS_STALLIF_Pos (8) /*!< HSUSBD_T::CEPINTSTS: STALLIF Position */
#define HSUSBD_CEPINTSTS_STALLIF_Msk (0x1ul << HSUSBD_CEPINTSTS_STALLIF_Pos) /*!< HSUSBD_T::CEPINTSTS: STALLIF Mask */
#define HSUSBD_CEPINTSTS_ERRIF_Pos (9) /*!< HSUSBD_T::CEPINTSTS: ERRIF Position */
#define HSUSBD_CEPINTSTS_ERRIF_Msk (0x1ul << HSUSBD_CEPINTSTS_ERRIF_Pos) /*!< HSUSBD_T::CEPINTSTS: ERRIF Mask */
#define HSUSBD_CEPINTSTS_STSDONEIF_Pos (10) /*!< HSUSBD_T::CEPINTSTS: STSDONEIF Position*/
#define HSUSBD_CEPINTSTS_STSDONEIF_Msk (0x1ul << HSUSBD_CEPINTSTS_STSDONEIF_Pos) /*!< HSUSBD_T::CEPINTSTS: STSDONEIF Mask */
#define HSUSBD_CEPINTSTS_BUFFULLIF_Pos (11) /*!< HSUSBD_T::CEPINTSTS: BUFFULLIF Position*/
#define HSUSBD_CEPINTSTS_BUFFULLIF_Msk (0x1ul << HSUSBD_CEPINTSTS_BUFFULLIF_Pos) /*!< HSUSBD_T::CEPINTSTS: BUFFULLIF Mask */
#define HSUSBD_CEPINTSTS_BUFEMPTYIF_Pos (12) /*!< HSUSBD_T::CEPINTSTS: BUFEMPTYIF Position*/
#define HSUSBD_CEPINTSTS_BUFEMPTYIF_Msk (0x1ul << HSUSBD_CEPINTSTS_BUFEMPTYIF_Pos) /*!< HSUSBD_T::CEPINTSTS: BUFEMPTYIF Mask */
#define HSUSBD_CEPTXCNT_TXCNT_Pos (0) /*!< HSUSBD_T::CEPTXCNT: TXCNT Position */
#define HSUSBD_CEPTXCNT_TXCNT_Msk (0xfful << HSUSBD_CEPTXCNT_TXCNT_Pos) /*!< HSUSBD_T::CEPTXCNT: TXCNT Mask */
#define HSUSBD_CEPRXCNT_RXCNT_Pos (0) /*!< HSUSBD_T::CEPRXCNT: RXCNT Position */
#define HSUSBD_CEPRXCNT_RXCNT_Msk (0xfful << HSUSBD_CEPRXCNT_RXCNT_Pos) /*!< HSUSBD_T::CEPRXCNT: RXCNT Mask */
#define HSUSBD_CEPDATCNT_DATCNT_Pos (0) /*!< HSUSBD_T::CEPDATCNT: DATCNT Position */
#define HSUSBD_CEPDATCNT_DATCNT_Msk (0xfffful << HSUSBD_CEPDATCNT_DATCNT_Pos) /*!< HSUSBD_T::CEPDATCNT: DATCNT Mask */
#define HSUSBD_SETUP1_0_SETUP0_Pos (0) /*!< HSUSBD_T::SETUP1_0: SETUP0 Position */
#define HSUSBD_SETUP1_0_SETUP0_Msk (0xfful << HSUSBD_SETUP1_0_SETUP0_Pos) /*!< HSUSBD_T::SETUP1_0: SETUP0 Mask */
#define HSUSBD_SETUP1_0_SETUP1_Pos (8) /*!< HSUSBD_T::SETUP1_0: SETUP1 Position */
#define HSUSBD_SETUP1_0_SETUP1_Msk (0xfful << HSUSBD_SETUP1_0_SETUP1_Pos) /*!< HSUSBD_T::SETUP1_0: SETUP1 Mask */
#define HSUSBD_SETUP3_2_SETUP2_Pos (0) /*!< HSUSBD_T::SETUP3_2: SETUP2 Position */
#define HSUSBD_SETUP3_2_SETUP2_Msk (0xfful << HSUSBD_SETUP3_2_SETUP2_Pos) /*!< HSUSBD_T::SETUP3_2: SETUP2 Mask */
#define HSUSBD_SETUP3_2_SETUP3_Pos (8) /*!< HSUSBD_T::SETUP3_2: SETUP3 Position */
#define HSUSBD_SETUP3_2_SETUP3_Msk (0xfful << HSUSBD_SETUP3_2_SETUP3_Pos) /*!< HSUSBD_T::SETUP3_2: SETUP3 Mask */
#define HSUSBD_SETUP5_4_SETUP4_Pos (0) /*!< HSUSBD_T::SETUP5_4: SETUP4 Position */
#define HSUSBD_SETUP5_4_SETUP4_Msk (0xfful << HSUSBD_SETUP5_4_SETUP4_Pos) /*!< HSUSBD_T::SETUP5_4: SETUP4 Mask */
#define HSUSBD_SETUP5_4_SETUP5_Pos (8) /*!< HSUSBD_T::SETUP5_4: SETUP5 Position */
#define HSUSBD_SETUP5_4_SETUP5_Msk (0xfful << HSUSBD_SETUP5_4_SETUP5_Pos) /*!< HSUSBD_T::SETUP5_4: SETUP5 Mask */
#define HSUSBD_SETUP7_6_SETUP6_Pos (0) /*!< HSUSBD_T::SETUP7_6: SETUP6 Position */
#define HSUSBD_SETUP7_6_SETUP6_Msk (0xfful << HSUSBD_SETUP7_6_SETUP6_Pos) /*!< HSUSBD_T::SETUP7_6: SETUP6 Mask */
#define HSUSBD_SETUP7_6_SETUP7_Pos (8) /*!< HSUSBD_T::SETUP7_6: SETUP7 Position */
#define HSUSBD_SETUP7_6_SETUP7_Msk (0xfful << HSUSBD_SETUP7_6_SETUP7_Pos) /*!< HSUSBD_T::SETUP7_6: SETUP7 Mask */
#define HSUSBD_CEPBUFST_SADDR_Pos (0) /*!< HSUSBD_T::CEPBUFST: SADDR Position */
#define HSUSBD_CEPBUFST_SADDR_Msk (0xffful << HSUSBD_CEPBUFST_SADDR_Pos) /*!< HSUSBD_T::CEPBUFST: SADDR Mask */
#define HSUSBD_CEPBUFEND_EADDR_Pos (0) /*!< HSUSBD_T::CEPBUFEND: EADDR Position */
#define HSUSBD_CEPBUFEND_EADDR_Msk (0xffful << HSUSBD_CEPBUFEND_EADDR_Pos) /*!< HSUSBD_T::CEPBUFEND: EADDR Mask */
#define HSUSBD_DMACTL_EPNUM_Pos (0) /*!< HSUSBD_T::DMACTL: EPNUM Position */
#define HSUSBD_DMACTL_EPNUM_Msk (0xful << HSUSBD_DMACTL_EPNUM_Pos) /*!< HSUSBD_T::DMACTL: EPNUM Mask */
#define HSUSBD_DMACTL_DMARD_Pos (4) /*!< HSUSBD_T::DMACTL: DMARD Position */
#define HSUSBD_DMACTL_DMARD_Msk (0x1ul << HSUSBD_DMACTL_DMARD_Pos) /*!< HSUSBD_T::DMACTL: DMARD Mask */
#define HSUSBD_DMACTL_DMAEN_Pos (5) /*!< HSUSBD_T::DMACTL: DMAEN Position */
#define HSUSBD_DMACTL_DMAEN_Msk (0x1ul << HSUSBD_DMACTL_DMAEN_Pos) /*!< HSUSBD_T::DMACTL: DMAEN Mask */
#define HSUSBD_DMACTL_SGEN_Pos (6) /*!< HSUSBD_T::DMACTL: SGEN Position */
#define HSUSBD_DMACTL_SGEN_Msk (0x1ul << HSUSBD_DMACTL_SGEN_Pos) /*!< HSUSBD_T::DMACTL: SGEN Mask */
#define HSUSBD_DMACTL_DMARST_Pos (7) /*!< HSUSBD_T::DMACTL: DMARST Position */
#define HSUSBD_DMACTL_DMARST_Msk (0x1ul << HSUSBD_DMACTL_DMARST_Pos) /*!< HSUSBD_T::DMACTL: DMARST Mask */
#define HSUSBD_DMACTL_SVINEP_Pos (8) /*!< HSUSBD_T::DMACTL: SVINEP Position */
#define HSUSBD_DMACTL_SVINEP_Msk (0x1ul << HSUSBD_DMACTL_SVINEP_Pos) /*!< HSUSBD_T::DMACTL: SVINEP Mask */
#define HSUSBD_DMACNT_DMACNT_Pos (0) /*!< HSUSBD_T::DMACNT: DMACNT Position */
#define HSUSBD_DMACNT_DMACNT_Msk (0xffffful << HSUSBD_DMACNT_DMACNT_Pos) /*!< HSUSBD_T::DMACNT: DMACNT Mask */
#define HSUSBD_EPDAT_EPDAT_Pos (0) /*!< HSUSBD_T::EPDAT: EPDAT Position */
#define HSUSBD_EPDAT_EPDAT_Msk (0xfffffffful << HSUSBD_EPDAT_EPDAT_Pos) /*!< HSUSBD_T::EPDAT: EPDAT Mask */
#define HSUSBD_EPINTSTS_BUFFULLIF_Pos (0) /*!< HSUSBD_T::EPINTSTS: BUFFULLIF Position */
#define HSUSBD_EPINTSTS_BUFFULLIF_Msk (0x1ul << HSUSBD_EPINTSTS_BUFFULLIF_Pos) /*!< HSUSBD_T::EPINTSTS: BUFFULLIF Mask */
#define HSUSBD_EPINTSTS_BUFEMPTYIF_Pos (1) /*!< HSUSBD_T::EPINTSTS: BUFEMPTYIF Position*/
#define HSUSBD_EPINTSTS_BUFEMPTYIF_Msk (0x1ul << HSUSBD_EPINTSTS_BUFEMPTYIF_Pos) /*!< HSUSBD_T::EPINTSTS: BUFEMPTYIF Mask */
#define HSUSBD_EPINTSTS_SHORTTXIF_Pos (2) /*!< HSUSBD_T::EPINTSTS: SHORTTXIF Position */
#define HSUSBD_EPINTSTS_SHORTTXIF_Msk (0x1ul << HSUSBD_EPINTSTS_SHORTTXIF_Pos) /*!< HSUSBD_T::EPINTSTS: SHORTTXIF Mask */
#define HSUSBD_EPINTSTS_TXPKIF_Pos (3) /*!< HSUSBD_T::EPINTSTS: TXPKIF Position */
#define HSUSBD_EPINTSTS_TXPKIF_Msk (0x1ul << HSUSBD_EPINTSTS_TXPKIF_Pos) /*!< HSUSBD_T::EPINTSTS: TXPKIF Mask */
#define HSUSBD_EPINTSTS_RXPKIF_Pos (4) /*!< HSUSBD_T::EPINTSTS: RXPKIF Position */
#define HSUSBD_EPINTSTS_RXPKIF_Msk (0x1ul << HSUSBD_EPINTSTS_RXPKIF_Pos) /*!< HSUSBD_T::EPINTSTS: RXPKIF Mask */
#define HSUSBD_EPINTSTS_OUTTKIF_Pos (5) /*!< HSUSBD_T::EPINTSTS: OUTTKIF Position */
#define HSUSBD_EPINTSTS_OUTTKIF_Msk (0x1ul << HSUSBD_EPINTSTS_OUTTKIF_Pos) /*!< HSUSBD_T::EPINTSTS: OUTTKIF Mask */
#define HSUSBD_EPINTSTS_INTKIF_Pos (6) /*!< HSUSBD_T::EPINTSTS: INTKIF Position */
#define HSUSBD_EPINTSTS_INTKIF_Msk (0x1ul << HSUSBD_EPINTSTS_INTKIF_Pos) /*!< HSUSBD_T::EPINTSTS: INTKIF Mask */
#define HSUSBD_EPINTSTS_PINGIF_Pos (7) /*!< HSUSBD_T::EPINTSTS: PINGIF Position */
#define HSUSBD_EPINTSTS_PINGIF_Msk (0x1ul << HSUSBD_EPINTSTS_PINGIF_Pos) /*!< HSUSBD_T::EPINTSTS: PINGIF Mask */
#define HSUSBD_EPINTSTS_NAKIF_Pos (8) /*!< HSUSBD_T::EPINTSTS: NAKIF Position */
#define HSUSBD_EPINTSTS_NAKIF_Msk (0x1ul << HSUSBD_EPINTSTS_NAKIF_Pos) /*!< HSUSBD_T::EPINTSTS: NAKIF Mask */
#define HSUSBD_EPINTSTS_STALLIF_Pos (9) /*!< HSUSBD_T::EPINTSTS: STALLIF Position */
#define HSUSBD_EPINTSTS_STALLIF_Msk (0x1ul << HSUSBD_EPINTSTS_STALLIF_Pos) /*!< HSUSBD_T::EPINTSTS: STALLIF Mask */
#define HSUSBD_EPINTSTS_NYETIF_Pos (10) /*!< HSUSBD_T::EPINTSTS: NYETIF Position */
#define HSUSBD_EPINTSTS_NYETIF_Msk (0x1ul << HSUSBD_EPINTSTS_NYETIF_Pos) /*!< HSUSBD_T::EPINTSTS: NYETIF Mask */
#define HSUSBD_EPINTSTS_ERRIF_Pos (11) /*!< HSUSBD_T::EPINTSTS: ERRIF Position */
#define HSUSBD_EPINTSTS_ERRIF_Msk (0x1ul << HSUSBD_EPINTSTS_ERRIF_Pos) /*!< HSUSBD_T::EPINTSTS: ERRIF Mask */
#define HSUSBD_EPINTSTS_SHORTRXIF_Pos (12) /*!< HSUSBD_T::EPINTSTS: SHORTRXIF Position */
#define HSUSBD_EPINTSTS_SHORTRXIF_Msk (0x1ul << HSUSBD_EPINTSTS_SHORTRXIF_Pos) /*!< HSUSBD_T::EPINTSTS: SHORTRXIF Mask */
#define HSUSBD_EPINTEN_BUFFULLIEN_Pos (0) /*!< HSUSBD_T::EPINTEN: BUFFULLIEN Position */
#define HSUSBD_EPINTEN_BUFFULLIEN_Msk (0x1ul << HSUSBD_EPINTEN_BUFFULLIEN_Pos) /*!< HSUSBD_T::EPINTEN: BUFFULLIEN Mask */
#define HSUSBD_EPINTEN_BUFEMPTYIEN_Pos (1) /*!< HSUSBD_T::EPINTEN: BUFEMPTYIEN Position*/
#define HSUSBD_EPINTEN_BUFEMPTYIEN_Msk (0x1ul << HSUSBD_EPINTEN_BUFEMPTYIEN_Pos) /*!< HSUSBD_T::EPINTEN: BUFEMPTYIEN Mask */
#define HSUSBD_EPINTEN_SHORTTXIEN_Pos (2) /*!< HSUSBD_T::EPINTEN: SHORTTXIEN Position */
#define HSUSBD_EPINTEN_SHORTTXIEN_Msk (0x1ul << HSUSBD_EPINTEN_SHORTTXIEN_Pos) /*!< HSUSBD_T::EPINTEN: SHORTTXIEN Mask */
#define HSUSBD_EPINTEN_TXPKIEN_Pos (3) /*!< HSUSBD_T::EPINTEN: TXPKIEN Position */
#define HSUSBD_EPINTEN_TXPKIEN_Msk (0x1ul << HSUSBD_EPINTEN_TXPKIEN_Pos) /*!< HSUSBD_T::EPINTEN: TXPKIEN Mask */
#define HSUSBD_EPINTEN_RXPKIEN_Pos (4) /*!< HSUSBD_T::EPINTEN: RXPKIEN Position */
#define HSUSBD_EPINTEN_RXPKIEN_Msk (0x1ul << HSUSBD_EPINTEN_RXPKIEN_Pos) /*!< HSUSBD_T::EPINTEN: RXPKIEN Mask */
#define HSUSBD_EPINTEN_OUTTKIEN_Pos (5) /*!< HSUSBD_T::EPINTEN: OUTTKIEN Position */
#define HSUSBD_EPINTEN_OUTTKIEN_Msk (0x1ul << HSUSBD_EPINTEN_OUTTKIEN_Pos) /*!< HSUSBD_T::EPINTEN: OUTTKIEN Mask */
#define HSUSBD_EPINTEN_INTKIEN_Pos (6) /*!< HSUSBD_T::EPINTEN: INTKIEN Position */
#define HSUSBD_EPINTEN_INTKIEN_Msk (0x1ul << HSUSBD_EPINTEN_INTKIEN_Pos) /*!< HSUSBD_T::EPINTEN: INTKIEN Mask */
#define HSUSBD_EPINTEN_PINGIEN_Pos (7) /*!< HSUSBD_T::EPINTEN: PINGIEN Position */
#define HSUSBD_EPINTEN_PINGIEN_Msk (0x1ul << HSUSBD_EPINTEN_PINGIEN_Pos) /*!< HSUSBD_T::EPINTEN: PINGIEN Mask */
#define HSUSBD_EPINTEN_NAKIEN_Pos (8) /*!< HSUSBD_T::EPINTEN: NAKIEN Position */
#define HSUSBD_EPINTEN_NAKIEN_Msk (0x1ul << HSUSBD_EPINTEN_NAKIEN_Pos) /*!< HSUSBD_T::EPINTEN: NAKIEN Mask */
#define HSUSBD_EPINTEN_STALLIEN_Pos (9) /*!< HSUSBD_T::EPINTEN: STALLIEN Position */
#define HSUSBD_EPINTEN_STALLIEN_Msk (0x1ul << HSUSBD_EPINTEN_STALLIEN_Pos) /*!< HSUSBD_T::EPINTEN: STALLIEN Mask */
#define HSUSBD_EPINTEN_NYETIEN_Pos (10) /*!< HSUSBD_T::EPINTEN: NYETIEN Position */
#define HSUSBD_EPINTEN_NYETIEN_Msk (0x1ul << HSUSBD_EPINTEN_NYETIEN_Pos) /*!< HSUSBD_T::EPINTEN: NYETIEN Mask */
#define HSUSBD_EPINTEN_ERRIEN_Pos (11) /*!< HSUSBD_T::EPINTEN: ERRIEN Position */
#define HSUSBD_EPINTEN_ERRIEN_Msk (0x1ul << HSUSBD_EPINTEN_ERRIEN_Pos) /*!< HSUSBD_T::EPINTEN: ERRIEN Mask */
#define HSUSBD_EPINTEN_SHORTRXIEN_Pos (12) /*!< HSUSBD_T::EPINTEN: SHORTRXIEN Position */
#define HSUSBD_EPINTEN_SHORTRXIEN_Msk (0x1ul << HSUSBD_EPINTEN_SHORTRXIEN_Pos) /*!< HSUSBD_T::EPINTEN: SHORTRXIEN Mask */
#define HSUSBD_EPDATCNT_DATCNT_Pos (0) /*!< HSUSBD_T::EPDATCNT: DATCNT Position */
#define HSUSBD_EPDATCNT_DATCNT_Msk (0xfffful << HSUSBD_EPDATCNT_DATCNT_Pos) /*!< HSUSBD_T::EPDATCNT: DATCNT Mask */
#define HSUSBD_EPDATCNT_DMALOOP_Pos (16) /*!< HSUSBD_T::EPDATCNT: DMALOOP Position */
#define HSUSBD_EPDATCNT_DMALOOP_Msk (0x7ffful << HSUSBD_EPDATCNT_DMALOOP_Pos) /*!< HSUSBD_T::EPDATCNT: DMALOOP Mask */
#define HSUSBD_EPRSPCTL_FLUSH_Pos (0) /*!< HSUSBD_T::EPRSPCTL: FLUSH Position */
#define HSUSBD_EPRSPCTL_FLUSH_Msk (0x1ul << HSUSBD_EPRSPCTL_FLUSH_Pos) /*!< HSUSBD_T::EPRSPCTL: FLUSH Mask */
#define HSUSBD_EPRSPCTL_MODE_Pos (1) /*!< HSUSBD_T::EPRSPCTL: MODE Position */
#define HSUSBD_EPRSPCTL_MODE_Msk (0x3ul << HSUSBD_EPRSPCTL_MODE_Pos) /*!< HSUSBD_T::EPRSPCTL: MODE Mask */
#define HSUSBD_EPRSPCTL_TOGGLE_Pos (3) /*!< HSUSBD_T::EPRSPCTL: TOGGLE Position */
#define HSUSBD_EPRSPCTL_TOGGLE_Msk (0x1ul << HSUSBD_EPRSPCTL_TOGGLE_Pos) /*!< HSUSBD_T::EPRSPCTL: TOGGLE Mask */
#define HSUSBD_EPRSPCTL_HALT_Pos (4) /*!< HSUSBD_T::EPRSPCTL: HALT Position */
#define HSUSBD_EPRSPCTL_HALT_Msk (0x1ul << HSUSBD_EPRSPCTL_HALT_Pos) /*!< HSUSBD_T::EPRSPCTL: HALT Mask */
#define HSUSBD_EPRSPCTL_ZEROLEN_Pos (5) /*!< HSUSBD_T::EPRSPCTL: ZEROLEN Position */
#define HSUSBD_EPRSPCTL_ZEROLEN_Msk (0x1ul << HSUSBD_EPRSPCTL_ZEROLEN_Pos) /*!< HSUSBD_T::EPRSPCTL: ZEROLEN Mask */
#define HSUSBD_EPRSPCTL_SHORTTXEN_Pos (6) /*!< HSUSBD_T::EPRSPCTL: SHORTTXEN Position */
#define HSUSBD_EPRSPCTL_SHORTTXEN_Msk (0x1ul << HSUSBD_EPRSPCTL_SHORTTXEN_Pos) /*!< HSUSBD_T::EPRSPCTL: SHORTTXEN Mask */
#define HSUSBD_EPRSPCTL_DISBUF_Pos (7) /*!< HSUSBD_T::EPRSPCTL: DISBUF Position */
#define HSUSBD_EPRSPCTL_DISBUF_Msk (0x1ul << HSUSBD_EPRSPCTL_DISBUF_Pos) /*!< HSUSBD_T::EPRSPCTL: DISBUF Mask */
#define HSUSBD_EPMPS_EPMPS_Pos (0) /*!< HSUSBD_T::EPMPS: EPMPS Position */
#define HSUSBD_EPMPS_EPMPS_Msk (0x7fful << HSUSBD_EPMPS_EPMPS_Pos) /*!< HSUSBD_T::EPMPS: EPMPS Mask */
#define HSUSBD_EPTXCNT_TXCNT_Pos (0) /*!< HSUSBD_T::EPTXCNT: TXCNT Position */
#define HSUSBD_EPTXCNT_TXCNT_Msk (0x7fful << HSUSBD_EPTXCNT_TXCNT_Pos) /*!< HSUSBD_T::EPTXCNT: TXCNT Mask */
#define HSUSBD_EPCFG_EPEN_Pos (0) /*!< HSUSBD_T::EPCFG: EPEN Position */
#define HSUSBD_EPCFG_EPEN_Msk (0x1ul << HSUSBD_EPCFG_EPEN_Pos) /*!< HSUSBD_T::EPCFG: EPEN Mask */
#define HSUSBD_EPCFG_EPTYPE_Pos (1) /*!< HSUSBD_T::EPCFG: EPTYPE Position */
#define HSUSBD_EPCFG_EPTYPE_Msk (0x3ul << HSUSBD_EPCFG_EPTYPE_Pos) /*!< HSUSBD_T::EPCFG: EPTYPE Mask */
#define HSUSBD_EPCFG_EPDIR_Pos (3) /*!< HSUSBD_T::EPCFG: EPDIR Position */
#define HSUSBD_EPCFG_EPDIR_Msk (0x1ul << HSUSBD_EPCFG_EPDIR_Pos) /*!< HSUSBD_T::EPCFG: EPDIR Mask */
#define HSUSBD_EPCFG_EPNUM_Pos (4) /*!< HSUSBD_T::EPCFG: EPNUM Position */
#define HSUSBD_EPCFG_EPNUM_Msk (0xful << HSUSBD_EPCFG_EPNUM_Pos) /*!< HSUSBD_T::EPCFG: EPNUM Mask */
#define HSUSBD_EPBUFST_SADDR_Pos (0) /*!< HSUSBD_T::EPBUFST: SADDR Position */
#define HSUSBD_EPBUFST_SADDR_Msk (0xffful << HSUSBD_EPBUFST_SADDR_Pos) /*!< HSUSBD_T::EPBUFST: SADDR Mask */
#define HSUSBD_EPBUFEND_EADDR_Pos (0) /*!< HSUSBD_T::EPBUFEND: EADDR Position */
#define HSUSBD_EPBUFEND_EADDR_Msk (0xffful << HSUSBD_EPBUFEND_EADDR_Pos) /*!< HSUSBD_T::EPBUFEND: EADDR Mask */
#define HSUSBD_BCDC_BCDEN_Pos (0) /*!< HSUSBD_T::BCDC: BCDEN Position */
#define HSUSBD_BCDC_BCDEN_Msk (0x1ul << HSUSBD_BCDC_BCDEN_Pos) /*!< HSUSBD_T::BCDC: BCDEN Mask */
#define HSUSBD_BCDC_DETMOD_Pos (1) /*!< HSUSBD_T::BCDC: DETMOD Position */
#define HSUSBD_BCDC_DETMOD_Msk (0x7ul << HSUSBD_BCDC_DETMOD_Pos) /*!< HSUSBD_T::BCDC: DETMOD Mask */
#define HSUSBD_BCDC_DETSTS_Pos (4) /*!< HSUSBD_T::BCDC: DETSTS Position */
#define HSUSBD_BCDC_DETSTS_Msk (0x1ul << HSUSBD_BCDC_DETSTS_Pos) /*!< HSUSBD_T::BCDC: DETSTS Mask */
#define HSUSBD_BCDC_USP_Pos (5) /*!< HSUSBD_T::BCDC: USP Position */
#define HSUSBD_BCDC_USP_Msk (0x1ul << HSUSBD_BCDC_USP_Pos) /*!< HSUSBD_T::BCDC: USP Mask */
#define HSUSBD_BCDC_BCDIEN_Pos (30) /*!< HSUSBD_T::BCDC: BCDIEN Position */
#define HSUSBD_BCDC_BCDIEN_Msk (0x1ul << HSUSBD_BCDC_BCDIEN_Pos) /*!< HSUSBD_T::BCDC: BCDIEN Mask */
#define HSUSBD_BCDC_BCDIF_Pos (31) /*!< HSUSBD_T::BCDC: BCDIF Position */
#define HSUSBD_BCDC_BCDIF_Msk (0x1ul << HSUSBD_BCDC_BCDIF_Pos) /*!< HSUSBD_T::BCDC: BCDIF Mask */
#define HSUSBD_LPMCSR_LPMEN_Pos (12) /*!< HSUSBD_T::LPMCSR: LPMEN Position */
#define HSUSBD_LPMCSR_LPMEN_Msk (0x1ul << HSUSBD_LPMCSR_LPMEN_Pos) /*!< HSUSBD_T::LPMCSR: LPMEN Mask */
#define HSUSBD_LPMCSR_LPMSLEEPEN_Pos (13) /*!< HSUSBD_T::LPMCSR: LPMSLEEPEN Position */
#define HSUSBD_LPMCSR_LPMSLEEPEN_Msk (0x1ul << HSUSBD_LPMCSR_LPMSLEEPEN_Pos) /*!< HSUSBD_T::LPMCSR: LPMSLEEPEN Mask */
#define HSUSBD_LPMCSR_LPMSENDNYET_Pos (14) /*!< HSUSBD_T::LPMCSR: LPMSENDNYET Position */
#define HSUSBD_LPMCSR_LPMSENDNYET_Msk (0x1ul << HSUSBD_LPMCSR_LPMSENDNYET_Pos) /*!< HSUSBD_T::LPMCSR: LPMSENDNYET Mask */
#define HSUSBD_DMAADDR_DMAADDR_Pos (0) /*!< HSUSBD_T::DMAADDR: DMAADDR Position */
#define HSUSBD_DMAADDR_DMAADDR_Msk (0xfffffffful << HSUSBD_DMAADDR_DMAADDR_Pos) /*!< HSUSBD_T::DMAADDR: DMAADDR Mask */
#define HSUSBD_PHYCTL_DPPUEN_Pos (8) /*!< HSUSBD_T::PHYCTL: DPPUEN Position */
#define HSUSBD_PHYCTL_DPPUEN_Msk (0x1ul << HSUSBD_PHYCTL_DPPUEN_Pos) /*!< HSUSBD_T::PHYCTL: DPPUEN Mask */
#define HSUSBD_PHYCTL_PHYEN_Pos (9) /*!< HSUSBD_T::PHYCTL: PHYEN Position */
#define HSUSBD_PHYCTL_PHYEN_Msk (0x1ul << HSUSBD_PHYCTL_PHYEN_Pos) /*!< HSUSBD_T::PHYCTL: PHYEN Mask */
#define HSUSBD_PHYCTL_VBUSWKEN_Pos (24) /*!< HSUSBD_T::PHYCTL: VBUSWKEN Position */
#define HSUSBD_PHYCTL_VBUSWKEN_Msk (0x1ul << HSUSBD_PHYCTL_VBUSWKEN_Pos) /*!< HSUSBD_T::PHYCTL: VBUSWKEN Mask */
#define HSUSBD_PHYCTL_LINESTATEWKEN_Pos (25) /*!< HSUSBD_T::PHYCTL: LINESTATEWKEN Position*/
#define HSUSBD_PHYCTL_LINESTATEWKEN_Msk (0x1ul << HSUSBD_PHYCTL_LINESTATEWKEN_Pos) /*!< HSUSBD_T::PHYCTL: LINESTATEWKEN Mask */
#define HSUSBD_PHYCTL_STALLREVERT_Pos (26) /*!< HSUSBD_T::PHYCTL: STALLREVERT Position */
#define HSUSBD_PHYCTL_STALLREVERT_Msk (0x1ul << HSUSBD_PHYCTL_STALLREVERT_Pos) /*!< HSUSBD_T::PHYCTL: STALLREVERT Mask */
#define HSUSBD_PHYCTL_PHYCLKSTB_Pos (27) /*!< HSUSBD_T::PHYCTL: PHYCLKSTB Position */
#define HSUSBD_PHYCTL_PHYCLKSTB_Msk (0x1ul << HSUSBD_PHYCTL_PHYCLKSTB_Pos) /*!< HSUSBD_T::PHYCTL: PHYCLKSTB Mask */
#define HSUSBD_PHYCTL_VBUSDET_Pos (31) /*!< HSUSBD_T::PHYCTL: VBUSDET Position */
#define HSUSBD_PHYCTL_VBUSDET_Msk (0x1ul << HSUSBD_PHYCTL_VBUSDET_Pos) /*!< HSUSBD_T::PHYCTL: VBUSDET Mask */
/**@}*/ /* HSUSBD_CONST */
/**@}*/ /* end of HSUSBD register group */
/**@}*/ /* end of REGISTER group */
#if defined ( __CC_ARM )
#pragma no_anon_unions
#endif
#endif /* __HSUSBD_REG_H__ */
