/**************************************************************************//**
 * @file     timer.c
 * @version  V3.00
 * @brief    Timer Controller(Timer) driver source file
 *
 * @copyright SPDX-License-Identifier: Apache-2.0
 * @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
 *****************************************************************************/
#include "NuMicro.h"


/** @addtogroup Standard_Driver Standard Driver
  @{
*/

/** @addtogroup TIMER_Driver TIMER Driver
  @{
*/

/** @addtogroup TIMER_EXPORTED_FUNCTIONS TIMER Exported Functions
  @{
*/

/**
  * @brief      Open Timer with Operate Mode and Frequency
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  * @param[in]  u32Mode     Operation mode. Possible options are
  *                         - \ref TIMER_ONESHOT_MODE
  *                         - \ref TIMER_PERIODIC_MODE
  *                         - \ref TIMER_TOGGLE_MODE
  *                         - \ref TIMER_CONTINUOUS_MODE
  * @param[in]  u32Freq     Target working frequency
  *
  * @return     Real timer working frequency
  *
  * @details    This API is used to configure timer to operate in specified mode and frequency.
  *             If timer cannot work in target frequency, a closest frequency will be chose and returned.
  * @note       After calling this API, Timer is \b NOT running yet. But could start timer running be calling
  *             \ref TIMER_Start macro or program registers directly.
  */
uint32_t TIMER_Open(TIMER_T *timer, uint32_t u32Mode, uint32_t u32Freq)
{
    uint32_t u32Clk = TIMER_GetModuleClock(timer);
    uint32_t u32Cmpr = 0UL, u32Prescale = 0UL;

    /* Fastest possible timer working freq is (u32Clk / 2). While cmpr = 2, prescaler = 0. */
    if(u32Freq > (u32Clk / 2UL))
    {
        u32Cmpr = 2UL;
    }
    else
    {
        u32Cmpr = u32Clk / u32Freq;
        u32Prescale = (u32Cmpr >> 24);  /* for 24 bits CMPDAT */
        if (u32Prescale > 0UL)
            u32Cmpr = u32Cmpr / (u32Prescale + 1UL);
    }

    timer->CTL = u32Mode | u32Prescale;
    timer->CMP = u32Cmpr;

    return(u32Clk / (u32Cmpr * (u32Prescale + 1UL)));
}

/**
  * @brief      Stop Timer Counting
  *
  * @param[in]  timer   The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     None
  *
  * @details    This API stops timer counting and disable all timer interrupt function.
  */
void TIMER_Close(TIMER_T *timer)
{
    timer->CTL = 0UL;
    timer->EXTCTL = 0UL;
}

/**
  * @brief      Create a specify Delay Time
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  * @param[in]  u32Usec     Delay period in micro seconds. Valid values are between 100~1000000 (100 micro second ~ 1 second).
  *
  * @return     Delay success or not
  * @retval     0 Success, target delay time reached
  * @retval     TIMER_TIMEOUT_ERR Delay function execute failed due to timer stop working
  *
  * @details    This API is used to create a delay loop for u32usec micro seconds by using timer one-shot mode.
  * @note       This API overwrites the register setting of the timer used to count the delay time.
  * @note       This API use polling mode. So there is no need to enable interrupt for the timer module used to generate delay.
  */
int32_t TIMER_Delay(TIMER_T *timer, uint32_t u32Usec)
{
    uint32_t u32Clk = TIMER_GetModuleClock(timer);
    uint32_t u32Prescale = 0UL, u32Delay;
    uint32_t u32Cmpr, u32Cntr, u32NsecPerTick, i = 0UL;

    /* Clear current timer configuration */
    timer->CTL = 0UL;
    timer->EXTCTL = 0UL;

    if(u32Clk <= 1000000UL)   /* min delay is 1000 us if timer clock source is <= 1 MHz */
    {
        if(u32Usec < 1000UL)
        {
            u32Usec = 1000UL;
        }
        if(u32Usec > 1000000UL)
        {
            u32Usec = 1000000UL;
        }
    }
    else
    {
        if(u32Usec < 100UL)
        {
            u32Usec = 100UL;
        }
        if(u32Usec > 1000000UL)
        {
            u32Usec = 1000000UL;
        }
    }

    if(u32Clk <= 1000000UL)
    {
        u32Prescale = 0UL;
        u32NsecPerTick = 1000000000UL / u32Clk;
        u32Cmpr = (u32Usec * 1000UL) / u32NsecPerTick;
    }
    else
    {
        u32Cmpr = u32Usec * (u32Clk / 1000000UL);
        u32Prescale = (u32Cmpr >> 24);  /* for 24 bits CMPDAT */
        if (u32Prescale > 0UL)
            u32Cmpr = u32Cmpr / (u32Prescale + 1UL);
    }

    timer->CMP = u32Cmpr;
    timer->CTL = TIMER_CTL_CNTEN_Msk | TIMER_ONESHOT_MODE | u32Prescale;

    /* When system clock is faster than timer clock, it is possible timer active bit cannot set in time while we check it.
       And the while loop below return immediately, so put a tiny delay larger than 1 ECLK here allowing timer start counting and raise active flag. */ 
    for(u32Delay = (SystemCoreClock / u32Clk) + 1UL; u32Delay > 0UL; u32Delay--)
    {
        __NOP();
    }

    /* Add a bail out counter here in case timer clock source is disabled accidentally.
       Prescale counter reset every ECLK * (prescale value + 1).
       The u32Delay here is to make sure timer counter value changed when prescale counter reset */
    u32Delay = (SystemCoreClock / TIMER_GetModuleClock(timer)) * (u32Prescale + 1);
    u32Cntr = timer->CNT;
    while(timer->CTL & TIMER_CTL_ACTSTS_Msk)
    {
        /* Bailed out if timer stop counting e.g. Some interrupt handler close timer clock source. */
        if(u32Cntr == timer->CNT)
        {
            if(i++ > u32Delay)
            {
                return TIMER_TIMEOUT_ERR;
            }
        }
        else
        {
            i = 0;
            u32Cntr = timer->CNT;
        }
    }
    return 0;
}

/**
  * @brief      Enable Timer Capture Function
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  * @param[in]  u32CapMode  Timer capture mode. Could be
  *                         - \ref TIMER_CAPTURE_FREE_COUNTING_MODE
  *                         - \ref TIMER_CAPTURE_COUNTER_RESET_MODE
  * @param[in]  u32Edge     Timer capture trigger edge. Possible values are
  *                         - \ref TIMER_CAPTURE_EVENT_FALLING
  *                         - \ref TIMER_CAPTURE_EVENT_RISING
  *                         - \ref TIMER_CAPTURE_EVENT_FALLING_RISING
  *                         - \ref TIMER_CAPTURE_EVENT_RISING_FALLING
  *
  * @return     None
  *
  * @details    This API is used to enable timer capture function with specify capture trigger edge \n
  *             to get current counter value or reset counter value to 0.
  * @note       Timer frequency should be configured separately by using \ref TIMER_Open API, or program registers directly.
  */
void TIMER_EnableCapture(TIMER_T *timer, uint32_t u32CapMode, uint32_t u32Edge)
{
    timer->EXTCTL = (timer->EXTCTL & ~(TIMER_EXTCTL_CAPFUNCS_Msk | TIMER_EXTCTL_CAPEDGE_Msk)) |
                    u32CapMode | u32Edge | TIMER_EXTCTL_CAPEN_Msk;
}

/**
  * @brief      Disable Timer Capture Function
  *
  * @param[in]  timer   The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     None
  *
  * @details    This API is used to disable the timer capture function.
  */
void TIMER_DisableCapture(TIMER_T *timer)
{
    timer->EXTCTL &= ~TIMER_EXTCTL_CAPEN_Msk;
}

/**
  * @brief      Enable Timer Counter Function
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  * @param[in]  u32Edge     Detection edge of counter pin. Could be ether
  *                         - \ref TIMER_COUNTER_EVENT_FALLING, or
  *                         - \ref TIMER_COUNTER_EVENT_RISING
  *
  * @return     None
  *
  * @details    This function is used to enable the timer counter function with specify detection edge.
  * @note       Timer compare value should be configured separately by using \ref TIMER_SET_CMP_VALUE macro or program registers directly.
  * @note       While using event counter function, \ref TIMER_TOGGLE_MODE cannot set as timer operation mode.
  */
void TIMER_EnableEventCounter(TIMER_T *timer, uint32_t u32Edge)
{
    timer->EXTCTL = (timer->EXTCTL & ~TIMER_EXTCTL_CNTPHASE_Msk) | u32Edge;
    timer->CTL |= TIMER_CTL_EXTCNTEN_Msk;
}

/**
  * @brief      Disable Timer Counter Function
  *
  * @param[in]  timer   The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     None
  *
  * @details    This API is used to disable the timer event counter function.
  */
void TIMER_DisableEventCounter(TIMER_T *timer)
{
    timer->CTL &= ~TIMER_CTL_EXTCNTEN_Msk;
}

/**
  * @brief      Get Timer Clock Frequency
  *
  * @param[in]  timer   The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     Timer clock frequency
  *
  * @details    This API is used to get the timer clock frequency.
  * @note       This API cannot return correct clock rate if timer source is from external clock input.
  */
uint32_t TIMER_GetModuleClock(TIMER_T *timer)
{
    uint32_t u32Src, u32Clk;
    const uint32_t au32Clk[] = {__HXT, __LXT, 0UL, 0UL, 0UL, __LIRC, 0UL, __HIRC};

    if(timer == TIMER0)
    {
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR0SEL_Msk) >> CLK_CLKSEL1_TMR0SEL_Pos;
    }
    else if(timer == TIMER1)
    {
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR1SEL_Msk) >> CLK_CLKSEL1_TMR1SEL_Pos;
    }
    else if(timer == TIMER2)
    {
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR2SEL_Msk) >> CLK_CLKSEL1_TMR2SEL_Pos;
    }
    else      /* Timer 3 */
    {
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR3SEL_Msk) >> CLK_CLKSEL1_TMR3SEL_Pos;
    }

    if(u32Src == 2UL)
    {
        if((timer == TIMER0) || (timer == TIMER1))
        {
            u32Clk = CLK_GetPCLK0Freq();
        }
        else
        {
            u32Clk = CLK_GetPCLK1Freq();
        }
    }
    else
    {
        u32Clk = au32Clk[u32Src];
    }

    return u32Clk;
}

/**
  * @brief This function is used to enable the Timer frequency counter function
  * @param[in] timer The base address of Timer module. Can be \ref TIMER0 or \ref TIMER2
  * @param[in] u32DropCount This parameter has no effect in M480 series BSP
  * @param[in] u32Timeout This parameter has no effect in M480 series BSP
  * @param[in] u32EnableInt Enable interrupt assertion after capture complete or not. Valid values are TRUE and FALSE
  * @return None
  * @details This function is used to calculate input event frequency. After enable
  *          this function, a pair of timers, TIMER0 and TIMER1, or TIMER2 and TIMER3
  *          will be configured for this function. The mode used to calculate input
  *          event frequency is mentioned as "Inter Timer Trigger Mode" in Technical
  *          Reference Manual
  */
void TIMER_EnableFreqCounter(TIMER_T *timer,
                             uint32_t u32DropCount,
                             uint32_t u32Timeout,
                             uint32_t u32EnableInt)
{
    TIMER_T *t;    /* store the timer base to configure compare value */

    t = (timer == TIMER0) ? TIMER1 : TIMER3;

    t->CMP = 0xFFFFFFUL;
    t->EXTCTL = u32EnableInt ? TIMER_EXTCTL_CAPIEN_Msk : 0UL;
    timer->CTL = TIMER_CTL_INTRGEN_Msk | TIMER_CTL_CNTEN_Msk;

    return;
}

/**
  * @brief This function is used to disable the Timer frequency counter function.
  * @param[in] timer The base address of Timer module
  * @return None
  */
void TIMER_DisableFreqCounter(TIMER_T *timer)
{
    timer->CTL &= ~TIMER_CTL_INTRGEN_Msk;
}

/**
  * @brief This function is used to select the interrupt source used to trigger other modules.
  * @param[in] timer The base address of Timer module
  * @param[in] u32Src Selects the interrupt source to trigger other modules. Could be:
  *              - \ref TIMER_TRGSRC_TIMEOUT_EVENT
  *              - \ref TIMER_TRGSRC_CAPTURE_EVENT
  * @return None
  */
void TIMER_SetTriggerSource(TIMER_T *timer, uint32_t u32Src)
{
    timer->TRGCTL = (timer->TRGCTL & ~TIMER_TRGCTL_TRGSSEL_Msk) | u32Src;
}

/**
  * @brief This function is used to set modules trigger by timer interrupt
  * @param[in] timer The base address of Timer module
  * @param[in] u32Mask The mask of modules (EPWM/BPWM, EADC, DAC and PDMA) trigger by timer. Is the combination of
  *             - \ref TIMER_TRG_TO_PWM,
  *             - \ref TIMER_TRG_TO_EADC,
  *             - \ref TIMER_TRG_TO_DAC, and
  *             - \ref TIMER_TRG_TO_PDMA
  * @return None
  */
void TIMER_SetTriggerTarget(TIMER_T *timer, uint32_t u32Mask)
{
    timer->TRGCTL = (timer->TRGCTL & ~(TIMER_TRGCTL_TRGPWM_Msk | TIMER_TRGCTL_TRGDAC_Msk | TIMER_TRGCTL_TRGEADC_Msk | TIMER_TRGCTL_TRGPDMA_Msk)) | u32Mask;
}

/**
  * @brief      Reset Counter
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     Reset success or not
  * @retval     0 Timer reset success
  * @retval     TIMER_TIMEOUT_ERR Timer reset failed
  *
  * @details    This function is used to reset current counter value and internal prescale counter value.
  */
int32_t TIMER_ResetCounter(TIMER_T *timer)
{
    uint32_t u32Delay;

    timer->CNT = 0UL;
    /* Takes 2~3 ECLKs to reset timer counter */
    u32Delay = (SystemCoreClock / TIMER_GetModuleClock(timer)) * 3;
    while(((timer->CNT&TIMER_CNT_RSTACT_Msk) == TIMER_CNT_RSTACT_Msk) && (--u32Delay))
    {
        __NOP();
    }
    return u32Delay > 0 ? 0 : TIMER_TIMEOUT_ERR;
}

/**
  * @brief      Enable Capture Input Noise Filter Function
  *
  * @param[in]  timer           The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @param[in]  u32FilterCount  Noise filter counter. Valid values are between 0~7.
  *
  * @param[in]  u32ClkSrcSel    Noise filter counter clock source, could be one of following source
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_1
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_2
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_4
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_8
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_16
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_32
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_64
  *                                 - \ref TIMER_CAPTURE_NOISE_FILTER_PCLK_DIV_128
  *
  * @return     None
  *
  * @details    This function is used to enable capture input noise filter function.
  */
void TIMER_EnableCaptureInputNoiseFilter(TIMER_T *timer, uint32_t u32FilterCount, uint32_t u32ClkSrcSel)
{
    timer->CAPNF = (((timer)->CAPNF & ~(TIMER_CAPNF_CAPNFCNT_Msk | TIMER_CAPNF_CAPNFSEL_Msk))
                    | (TIMER_CAPNF_CAPNFEN_Msk | (u32FilterCount << TIMER_CAPNF_CAPNFCNT_Pos) | (u32ClkSrcSel << TIMER_CAPNF_CAPNFSEL_Pos)));
}

/**
  * @brief      Disable Capture Input Noise Filter Function
  *
  * @param[in]  timer       The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
  *
  * @return     None
  *
  * @details    This function is used to disable capture input noise filter function.
  */
void TIMER_DisableCaptureInputNoiseFilter(TIMER_T *timer)
{
    timer->CAPNF &= ~TIMER_CAPNF_CAPNFEN_Msk;
}

/*@}*/ /* end of group TIMER_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group TIMER_Driver */

/*@}*/ /* end of group Standard_Driver */