GitBucket
Newer
/**
******************************************************************************
* @file stm32g0xx_hal_pwr_ex.h
* @author MCD Application Team
* @brief Header file of PWR HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_PWR_EX_H
#define STM32G0xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_def.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup PWREx PWREx
* @brief PWR Extended HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
* @{
*/
#if defined(PWR_PVM_SUPPORT)
/**
* @brief PWR PVM configuration structure definition
*/
typedef struct
{
uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold.
This parameter can be a value of @ref PWREx_PVM_Type.
@arg @ref PWR_PVM_USB Peripheral Voltage Monitoring USB enable */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWREx_PVM_Mode. */
} PWR_PVMTypeDef;
#endif /* PWR_PVM_SUPPORT */
#if defined(PWR_PVD_SUPPORT)
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
This parameter can be a value or a combination of
@ref PWR_PVD_detection_level. */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWR_PVD_Mode. */
} PWR_PVDTypeDef;
#endif /* PWR_PVD_SUPPORT */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
* @{
*/
#if defined(PWR_PVD_SUPPORT)
/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels
* @note see datasheet for selection voltage value
* @{
*/
#define PWR_PVDLEVEL_RISING_0 (0x00000000u) /*!< PVD threshold level 0 for rising detection */
#define PWR_PVDLEVEL_RISING_1 (PWR_CR2_PVDRT_0) /*!< PVD threshold level 1 for rising detection */
#define PWR_PVDLEVEL_RISING_2 (PWR_CR2_PVDRT_1) /*!< PVD threshold level 2 for rising detection */
#define PWR_PVDLEVEL_RISING_3 (PWR_CR2_PVDRT_0 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 3 for rising detection */
#define PWR_PVDLEVEL_RISING_4 (PWR_CR2_PVDRT_2) /*!< PVD threshold level 4 for rising detection */
#define PWR_PVDLEVEL_RISING_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /*!< PVD threshold level 5 for rising detection */
#define PWR_PVDLEVEL_RISING_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 6 for rising detection */
#define PWR_PVDLEVEL_FALLING_0 (0x00000000u) /*!< PVD threshold level 0 for falling detection */
#define PWR_PVDLEVEL_FALLING_1 (PWR_CR2_PVDFT_0) /*!< PVD threshold level 1 for falling detection */
#define PWR_PVDLEVEL_FALLING_2 (PWR_CR2_PVDFT_1) /*!< PVD threshold level 2 for falling detection */
#define PWR_PVDLEVEL_FALLING_3 (PWR_CR2_PVDFT_0 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 3 for falling detection */
#define PWR_PVDLEVEL_FALLING_4 (PWR_CR2_PVDFT_2) /*!< PVD threshold level 4 for falling detection */
#define PWR_PVDLEVEL_FALLING_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /*!< PVD threshold level 5 for falling detection */
#define PWR_PVDLEVEL_FALLING_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 6 for falling detection */
#define PWR_PVDLEVEL_0 (PWR_PVDLEVEL_RISING_0 | PWR_PVDLEVEL_FALLING_0) /*!< same PVD threshold level 0 on rising & falling */
#define PWR_PVDLEVEL_1 (PWR_PVDLEVEL_RISING_1 | PWR_PVDLEVEL_FALLING_1) /*!< same PVD threshold level 1 on rising & falling */
#define PWR_PVDLEVEL_2 (PWR_PVDLEVEL_RISING_2 | PWR_PVDLEVEL_FALLING_2) /*!< same PVD threshold level 2 on rising & falling */
#define PWR_PVDLEVEL_3 (PWR_PVDLEVEL_RISING_3 | PWR_PVDLEVEL_FALLING_3) /*!< same PVD threshold level 3 on rising & falling */
#define PWR_PVDLEVEL_4 (PWR_PVDLEVEL_RISING_4 | PWR_PVDLEVEL_FALLING_4) /*!< same PVD threshold level 4 on rising & falling */
#define PWR_PVDLEVEL_5 (PWR_PVDLEVEL_RISING_5 | PWR_PVDLEVEL_FALLING_5) /*!< same PVD threshold level 5 on rising & falling */
#define PWR_PVDLEVEL_6 (PWR_PVDLEVEL_RISING_6 | PWR_PVDLEVEL_FALLING_6) /*!< same PVD threshold level 6 on rising & falling */
#define PWR_PVDLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /*!< External input analog voltage (compared internally to VREFINT) */
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode
* @{
*/
#define PWR_PVD_MODE_NORMAL (0x00000000u) /*!< basic mode is used */
#define PWR_PVD_MODE_IT_RISING (0x00010001u) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING (0x00010002u) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING (0x00020001u) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING (0x00020002u) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003u) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line
* @{
*/
#define PWR_EXTI_LINE_PVD (EXTI_IMR1_IM16) /*!< External interrupt line 16 connected to PVD */
/**
* @}
*/
/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line
* @{
*/
#define PWR_EVENT_LINE_PVD (EXTI_EMR1_EM16) /*!< Event line 16 connected to PVD */
/**
* @}
*/
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type
* @{
*/
#define PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */
/**
* @}
*/
/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode
* @{
*/
#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_PVM_EXTI_LINE PWR PVM external interrupt line
* @{
*/
#define PWR_EXTI_LINE_PVM (EXTI_IMR2_IM34) /*!< External interrupt line 34 connected to PVM */
/**
* @}
*/
/** @defgroup PWR_PVM_EVENT_LINE PWR PVM event line
* @{
*/
#define PWR_EVENT_LINE_PVM (EXTI_EMR2_EM34) /*!< Event line 34 connected to PVM */
/**
* @}
*/
#endif /* PWR_PVM_SUPPORT */
/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection
* @{
*/
#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000u) /*!< VBAT charging through a 5 kOhms resistor */
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
/**
* @}
*/
/** @defgroup PWREx_GPIO_Bit_Number GPIO bit position
* @brief for I/O pull up/down setting in standby/shutdown mode
* @{
*/
#define PWR_GPIO_BIT_0 PWR_PUCRB_PU0 /*!< GPIO port I/O pin 0 */
#define PWR_GPIO_BIT_1 PWR_PUCRB_PU1 /*!< GPIO port I/O pin 1 */
#define PWR_GPIO_BIT_2 PWR_PUCRB_PU2 /*!< GPIO port I/O pin 2 */
#define PWR_GPIO_BIT_3 PWR_PUCRB_PU3 /*!< GPIO port I/O pin 3 */
#define PWR_GPIO_BIT_4 PWR_PUCRB_PU4 /*!< GPIO port I/O pin 4 */
#define PWR_GPIO_BIT_5 PWR_PUCRB_PU5 /*!< GPIO port I/O pin 5 */
#define PWR_GPIO_BIT_6 PWR_PUCRB_PU6 /*!< GPIO port I/O pin 6 */
#define PWR_GPIO_BIT_7 PWR_PUCRB_PU7 /*!< GPIO port I/O pin 7 */
#define PWR_GPIO_BIT_8 PWR_PUCRB_PU8 /*!< GPIO port I/O pin 8 */
#define PWR_GPIO_BIT_9 PWR_PUCRB_PU9 /*!< GPIO port I/O pin 9 */
#define PWR_GPIO_BIT_10 PWR_PUCRB_PU10 /*!< GPIO port I/O pin 10 */
#define PWR_GPIO_BIT_11 PWR_PUCRB_PU11 /*!< GPIO port I/O pin 11 */
#define PWR_GPIO_BIT_12 PWR_PUCRB_PU12 /*!< GPIO port I/O pin 12 */
#define PWR_GPIO_BIT_13 PWR_PUCRB_PU13 /*!< GPIO port I/O pin 13 */
#define PWR_GPIO_BIT_14 PWR_PUCRB_PU14 /*!< GPIO port I/O pin 14 */
#define PWR_GPIO_BIT_15 PWR_PUCRB_PU15 /*!< GPIO port I/O pin 15 */
/**
* @}
*/
/** @defgroup PWREx_GPIO_Port GPIO Port
* @{
*/
#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */
#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */
#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */
#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */
#if defined (GPIOE)
#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */
#endif /* GPIOE */
#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */
/**
* @}
*/
/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes
* @{
*/
#define PWR_FLASHPD_LPRUN PWR_CR1_FPD_LPRUN /*!< Enable Flash power down in low power run mode */
#define PWR_FLASHPD_LPSLEEP PWR_CR1_FPD_LPSLP /*!< Enable Flash power down in low power sleep mode */
#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */
/**
* @}
*/
/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale
* @{
*/
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */
/**
* @}
*/
/** @addtogroup PWR_Flag PWR Status Flags
* @brief Elements values convention: 0000 00XX 000Y YYYYb
* - Y YYYY : Flag position in the XX register (5 bits)
* - XX : Status register (2 bits)
* - 01: SR1 register
* - 10: SR2 register
* The only exception is PWR_FLAG_WU, encompassing all
* wake-up flags and set to PWR_SR1_WUF.
* @{
*/
#if defined(PWR_PVM_SUPPORT)
#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */
#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Macros PWR Extended Exported Macros
* @{
*/
#if defined(PWR_PVD_SUPPORT)
/**
* @brief Enable the PVD Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Event Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
/**
* @brief Disable the PVD Event Line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD)
/**
* @brief Check whether or not the PVD EXTI interrupt Rising flag is set.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_RISING_FLAG() (EXTI->RPR1 & PWR_EXTI_LINE_PVD)
/**
* @brief Check whether or not the PVD EXTI interrupt Falling flag is set.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() (EXTI->FPR1 & PWR_EXTI_LINE_PVD)
/**
* @brief Clear the PVD EXTI interrupt Rising flag.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD)
/**
* @brief Clear the PVD EXTI interrupt Falling flag.
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD)
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/**
* @brief Enable the PVM Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Event Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM)
/**
* @brief Disable the PVM Event Line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Rising Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Disable the PVM Extended Interrupt Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM)
/**
* @brief Enable the PVM Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the PVM Extended Interrupt Rising & Falling Trigger.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM)
/**
* @brief Check whether or not the PVM EXTI interrupt Rising flag is set.
* @retval EXTI PVM Line Status.
*/
#define __HAL_PWR_PVM_EXTI_GET_RISING_FLAG() (EXTI->RPR2 & PWR_EXTI_LINE_PVM)
/**
* @brief Check whether or not the PVM EXTI interrupt Falling flag is set.
* @retval EXTI PVM Line Status.
*/
#define __HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() (EXTI->FPR2 & PWR_EXTI_LINE_PVM)
/**
* @brief Clear the PVM EXTI interrupt Rising flag.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR2, PWR_EXTI_LINE_PVM)
/**
* @brief Clear the PVM EXTI interrupt Falling flag.
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM)
#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
/* Private define ------------------------------------------------------------*/
/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines
* @{
*/
/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask
* @{
*/
#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */
#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */
#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */
#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros
* @{
*/
#define IS_PWR_BATTERY_RESISTOR_SELECT(__RESISTOR__) (((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_5) || \
((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \
(((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u))
#if defined (GPIOE)
#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \
((__GPIO__) == PWR_GPIO_B) || \
((__GPIO__) == PWR_GPIO_C) || \
((__GPIO__) == PWR_GPIO_D) || \
((__GPIO__) == PWR_GPIO_E) || \
((__GPIO__) == PWR_GPIO_F))
#else
#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \
((__GPIO__) == PWR_GPIO_B) || \
((__GPIO__) == PWR_GPIO_C) || \
((__GPIO__) == PWR_GPIO_D) || \
((__GPIO__) == PWR_GPIO_F))
#endif /* GPIOE */
#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \
(((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u))
#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
#if defined(PWR_PVD_SUPPORT)
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) & ~(PWR_CR2_PVDRT | PWR_CR2_PVDFT)) == 0x00000000u)
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) || \
((MODE) == PWR_PVD_MODE_IT_RISING) || \
((MODE) == PWR_PVD_MODE_IT_FALLING) || \
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || \
((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \
((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING))
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB)
#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\
((MODE) == PWR_PVM_MODE_IT_RISING) ||\
((MODE) == PWR_PVM_MODE_IT_FALLING) ||\
((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\
((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\
((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING))
#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions
* @{
*/
/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions
* @{
*/
/* Peripheral Control functions **********************************************/
void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection);
void HAL_PWREx_DisableBatteryCharging(void);
#if defined(PWR_CR3_ENB_ULP)
void HAL_PWREx_EnablePORMonitorSampling(void);
void HAL_PWREx_DisablePORMonitorSampling(void);
#endif /* PWR_CR3_ENB_ULP */
void HAL_PWREx_EnableInternalWakeUpLine(void);
void HAL_PWREx_DisableInternalWakeUpLine(void);
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
void HAL_PWREx_EnablePullUpPullDownConfig(void);
void HAL_PWREx_DisablePullUpPullDownConfig(void);
#if defined(PWR_CR3_RRS)
void HAL_PWREx_EnableSRAMRetention(void);
void HAL_PWREx_DisableSRAMRetention(void);
#endif /* PWR_CR3_RRS */
void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode);
void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode);
uint32_t HAL_PWREx_GetVoltageRange(void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
#if defined(PWR_PVD_SUPPORT)
/* Power voltage detection configuration functions ****************************/
HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWREx_EnablePVD(void);
void HAL_PWREx_DisablePVD(void);
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/* Power voltage monitoring configuration functions ***************************/
void HAL_PWREx_EnableVddIO2(void);
void HAL_PWREx_DisableVddIO2(void);
void HAL_PWREx_EnableVddUSB(void);
void HAL_PWREx_DisableVddUSB(void);
void HAL_PWREx_EnablePVMUSB(void);
void HAL_PWREx_DisablePVMUSB(void);
HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM);
#endif /* PWR_PVM_SUPPORT */
/* Low Power modes configuration functions ************************************/
void HAL_PWREx_EnableLowPowerRunMode(void);
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void);
#if defined(PWR_SHDW_SUPPORT)
void HAL_PWREx_EnterSHUTDOWNMode(void);
#endif /* PWR_SHDW_SUPPORT */
#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT)
void HAL_PWREx_PVD_PVM_IRQHandler(void);
void HAL_PWREx_PVD_PVM_Rising_Callback(void);
void HAL_PWREx_PVD_PVM_Falling_Callback(void);
#elif defined(PWR_PVD_SUPPORT)
void HAL_PWREx_PVD_IRQHandler(void);
void HAL_PWREx_PVD_Rising_Callback(void);
void HAL_PWREx_PVD_Falling_Callback(void);
#endif /* PWR_PVD_SUPPORT && PWR_PVM_SUPPORT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/