GitBucket
Newer
/**
******************************************************************************
* @file stm32wbxx_hal_cryp.h
* @author MCD Application Team
* @brief Header file of CRYP HAL module.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WBxx_HAL_CRYP_H
#define STM32WBxx_HAL_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx_hal_def.h"
/** @addtogroup STM32WBxx_HAL_Driver
* @{
*/
/** @defgroup CRYP CRYP
* @brief CRYP HAL module driver.
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CRYP_Exported_Types CRYP Exported Types
* @{
*/
/**
* @brief CRYP Init Structure definition
*/
typedef struct
{
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
This parameter can be a value of @ref CRYP_Data_Type */
uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1.
128 or 256 bit key length in TinyAES This parameter can be a value of @ref CRYP_Key_Size */
uint32_t *pKey; /*!< The key used for encryption/decryption */
uint32_t *pInitVect; /*!< The initialization vector used also as initialization
counter in CTR mode */
uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC
AES Algorithm ECB/CBC/CTR/GCM or CCM
This parameter can be a value of @ref CRYP_Algorithm_Mode */
uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication,
GCM : also known as Additional Authentication Data
CCM : named B1 composed of the associated data length and Associated Data. */
uint32_t HeaderSize; /*!< The size of header buffer */
uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */
uint32_t DataWidthUnit; /*!< Payload Data Width Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/
uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization
Vector only once and to skip configuration for consecutive processings.
This parameter can be a value of @ref CRYP_Configuration_Skip */
} CRYP_ConfigTypeDef;
/**
* @brief CRYP State Structure definition
*/
typedef enum
{
HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */
HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */
HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP BUSY, internal processing is ongoing */
#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U)
HAL_CRYP_STATE_SUSPENDED = 0x03U, /*!< CRYP suspended */
#endif /* USE_HAL_CRYP_SUSPEND_RESUME */
} HAL_CRYP_STATETypeDef;
#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U)
/**
* @brief HAL CRYP mode suspend definitions
*/
typedef enum
{
HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP processing suspension not requested */
HAL_CRYP_SUSPEND = 0x01U /*!< CRYP processing suspension requested */
}HAL_SuspendTypeDef;
#endif /* USE_HAL_CRYP_SUSPEND_RESUME */
/**
* @brief CRYP handle Structure definition
*/
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
typedef struct __CRYP_HandleTypeDef
#else
typedef struct
#endif
{
AES_TypeDef *Instance; /*!< AES Register base address */
CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */
FunctionalState AutoKeyDerivation; /*!< Used only in TinyAES to allow to bypass or not key write-up before decryption.
This parameter can be a value of ENABLE/DISABLE */
uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
__IO uint16_t CrypHeaderCount; /*!< Counter of header data in words */
__IO uint16_t CrypInCount; /*!< Counter of input data in words */
__IO uint16_t CrypOutCount; /*!< Counter of output data in words */
uint16_t Size; /*!< Length of input data */
uint32_t Phase; /*!< CRYP peripheral phase */
DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
HAL_LockTypeDef Lock; /*!< CRYP locking object */
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
__IO uint32_t ErrorCode; /*!< CRYP peripheral error code */
uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when
configuration can be skipped */
uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored
for a single signature computation after several
messages processing */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */
void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */
void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */
void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */
void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */
#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */
#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U)
__IO HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */
CRYP_ConfigTypeDef Init_saved; /*!< copy of CRYP required parameters when processing is suspended */
uint32_t *pCrypInBuffPtr_saved; /*!< copy of CRYP input pointer when processing is suspended */
uint32_t *pCrypOutBuffPtr_saved; /*!< copy of CRYP output pointer when processing is suspended */
uint32_t CrypInCount_saved; /*!< copy of CRYP input data counter when processing is suspended */
uint32_t CrypOutCount_saved; /*!< copy of CRYP output data counter when processing is suspended */
uint32_t Phase_saved; /*!< copy of CRYP authentication phase when processing is suspended */
__IO HAL_CRYP_STATETypeDef State_saved; /*!< copy of CRYP peripheral state when processing is suspended */
uint32_t IV_saved[4]; /*!< copy of Initialisation Vector registers */
uint32_t SUSPxR_saved[8]; /*!< copy of suspension registers */
uint32_t CR_saved; /*!< copy of CRYP control register when processing is suspended*/
uint32_t Key_saved[8]; /*!< copy of key registers */
uint16_t Size_saved; /*!< copy of input buffer size */
uint16_t CrypHeaderCount_saved; /*!< copy of CRYP header data counter when processing is suspended */
uint32_t SizesSum_saved; /*!< copy of SizesSum when processing is suspended */
uint32_t ResumingFlag; /*!< resumption flag to bypass steps already carried out */
FunctionalState AutoKeyDerivation_saved; /*!< copy of CRYP handle auto key derivation parameter */
#endif /* USE_HAL_CRYP_SUSPEND_RESUME */
} CRYP_HandleTypeDef;
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition
* @brief HAL CRYP Callback ID enumeration definition
* @{
*/
typedef enum
{
HAL_CRYP_MSPINIT_CB_ID = 0x00U, /*!< CRYP MspInit callback ID */
HAL_CRYP_MSPDEINIT_CB_ID = 0x01U, /*!< CRYP MspDeInit callback ID */
HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Input FIFO transfer completed callback ID */
HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x03U, /*!< CRYP Output FIFO transfer completed callback ID */
HAL_CRYP_ERROR_CB_ID = 0x04U, /*!< CRYP Error callback ID */
} HAL_CRYP_CallbackIDTypeDef;
/**
* @}
*/
/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition
* @brief HAL CRYP Callback pointer definition
* @{
*/
typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */
/**
* @}
*/
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
* @{
*/
/** @defgroup CRYP_Error_Definition CRYP Error Definition
* @{
*/
#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */
#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */
#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */
#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */
#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */
#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */
#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit
* @{
*/
#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */
#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is byte */
/**
* @}
*/
/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit
* @{
*/
#define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, header size unit is word */
#define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< By default, header size unit is byte */
/**
* @}
*/
/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode
* @{
*/
#define CRYP_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */
#define CRYP_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */
#define CRYP_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */
#define CRYP_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */
#define CRYP_AES_CCM AES_CR_CHMOD_2 /*!< Counter with Cipher Mode */
/**
* @}
*/
/** @defgroup CRYP_Key_Size CRYP Key Size
* @{
*/
#define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */
#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */
/**
* @}
*/
/** @defgroup CRYP_Data_Type CRYP Data Type
* @{
*/
#define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */
#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */
#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */
#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */
/**
* @}
*/
/** @defgroup CRYP_Interrupt CRYP Interrupt
* @{
*/
#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */
#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */
#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */
#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */
#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */
/**
* @}
*/
/** @defgroup CRYP_Flags CRYP Flags
* @{
*/
/* status flags */
#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */
#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */
#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */
#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */
/* clearing flags */
#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */
#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */
/**
* @}
*/
/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode
* @{
*/
#define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration to do systematically */
#define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration to do only once */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
* @{
*/
/** @brief Reset CRYP handle state
* @param __HANDLE__ specifies the CRYP handle.
* @retval None
*/
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\
(__HANDLE__)->State = HAL_CRYP_STATE_RESET;\
(__HANDLE__)->MspInitCallback = NULL;\
(__HANDLE__)->MspDeInitCallback = NULL;\
}while(0U)
#else
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET)
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
/**
* @brief Enable/Disable the CRYP peripheral.
* @param __HANDLE__ specifies the CRYP handle.
* @retval None
*/
#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= AES_CR_EN)
#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~AES_CR_EN)
/** @brief Check whether the specified CRYP status flag is set or not.
* @param __HANDLE__ specifies the CRYP handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values for TinyAES:
* @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden
* @arg @ref CRYP_IT_WRERR Write Error
* @arg @ref CRYP_IT_RDERR Read Error
* @arg @ref CRYP_IT_CCF Computation Complete
* This parameter can be one of the following values for CRYP:
* @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
* or a key preparation (for AES decryption).
* @arg CRYP_FLAG_IFEM: Input FIFO is empty
* @arg CRYP_FLAG_IFNF: Input FIFO is not full
* @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
* @arg CRYP_FLAG_OFNE: Output FIFO is not empty
* @arg CRYP_FLAG_OFFU: Output FIFO is full
* @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
* @retval The state of __FLAG__ (TRUE or FALSE).
*/
#define CRYP_FLAG_MASK 0x0000001FU
#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the CRYP pending status flag.
* @param __HANDLE__ specifies the CRYP handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be one of the following values:
* @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear
* @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear
* @retval None
*/
#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__))
/** @brief Check whether the specified CRYP interrupt source is enabled or not.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP interrupt source to check
* This parameter can be one of the following values for TinyAES:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* @retval State of interruption (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Check whether the specified CRYP interrupt is set or not.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ specifies the interrupt to check.
* This parameter can be one of the following values for TinyAES:
* @arg @ref CRYP_IT_WRERR Write Error
* @arg @ref CRYP_IT_RDERR Read Error
* @arg @ref CRYP_IT_CCF Computation Complete
* This parameter can be one of the following values for CRYP:
* @arg CRYP_IT_INI: Input FIFO service masked interrupt status
* @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status
* @retval The state of __INTERRUPT__ (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @brief Enable the CRYP interrupt.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP Interrupt.
* This parameter can be one of the following values for TinyAES:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* This parameter can be one of the following values for CRYP:
* @ CRYP_IT_INI : Input FIFO service interrupt mask.
* @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
* @retval None
*/
#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
/**
* @brief Disable the CRYP interrupt.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP Interrupt.
* This parameter can be one of the following values for TinyAES:
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt
* This parameter can be one of the following values for CRYP:
* @ CRYP_IT_INI : Input FIFO service interrupt mask.
* @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
* @retval None
*/
#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
/**
* @}
*/
/* Include CRYP HAL Extended module */
#include "stm32wbxx_hal_cryp_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
* @{
*/
/** @addtogroup CRYP_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf);
HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf);
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, pCRYP_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U)
void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp);
#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group2
* @{
*/
/* encryption/decryption ***********************************/
HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group3
* @{
*/
/* Interrupt Handler functions **********************************************/
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @defgroup CRYP_Private_Macros CRYP Private Macros
* @{
*/
/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters
* @{
*/
#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \
((ALGORITHM) == CRYP_AES_CBC) || \
((ALGORITHM) == CRYP_AES_CTR) || \
((ALGORITHM) == CRYP_AES_GCM_GMAC)|| \
((ALGORITHM) == CRYP_AES_CCM))
#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \
((KEYSIZE) == CRYP_KEYSIZE_256B))
#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B) || \
((DATATYPE) == CRYP_DATATYPE_16B) || \
((DATATYPE) == CRYP_DATATYPE_8B) || \
((DATATYPE) == CRYP_DATATYPE_1B))
#define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \
((CONFIG) == CRYP_KEYIVCONFIG_ONCE))
#define IS_CRYP_BUFFERSIZE(ALGO, DATAWIDTH, SIZE) \
(((((ALGO) == CRYP_AES_CTR)) && \
((((DATAWIDTH) == CRYP_DATAWIDTHUNIT_WORD) && (((SIZE) % 4U) == 0U)) || \
(((DATAWIDTH) == CRYP_DATAWIDTHUNIT_BYTE) && (((SIZE) % 16U) == 0U)))) || \
(((ALGO) == CRYP_AES_ECB) || ((ALGO) == CRYP_AES_CBC) || \
((ALGO)== CRYP_AES_GCM_GMAC) || ((ALGO) == CRYP_AES_CCM)))
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Constants CRYP Private Constants
* @{
*/
/**
* @}
*/
/* Private defines -----------------------------------------------------------*/
/** @defgroup CRYP_Private_Defines CRYP Private Defines
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Variables CRYP Private Variables
* @{
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Functions CRYP Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32WBxx_HAL_CRYP_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/