/**
******************************************************************************
* @file stm32wbxx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WBxx_HAL_CONF_H
#define STM32WBxx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_COMP_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_CRYP_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_HSEM_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_IPCC_MODULE_ENABLED
#define HAL_IRDA_MODULE_ENABLED
#define HAL_IWDG_MODULE_ENABLED
#define HAL_LCD_MODULE_ENABLED
#define HAL_LPTIM_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
#define HAL_PKA_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_QSPI_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_RNG_MODULE_ENABLED
#define HAL_RTC_MODULE_ENABLED
#define HAL_SAI_MODULE_ENABLED
#define HAL_SMARTCARD_MODULE_ENABLED
#define HAL_SMBUS_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_TSC_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED
#define HAL_WWDG_MODULE_ENABLED
#if !defined (USE_HAL_ADC_REGISTER_CALLBACKS)
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_COMP_REGISTER_CALLBACKS)
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_CRYP_REGISTER_CALLBACKS)
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_I2C_REGISTER_CALLBACKS)
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_IRDA_REGISTER_CALLBACKS)
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_LPTIM_REGISTER_CALLBACKS)
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_PCD_REGISTER_CALLBACKS)
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_PKA_REGISTER_CALLBACKS)
#define USE_HAL_PKA_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_QSPI_REGISTER_CALLBACKS)
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_RNG_REGISTER_CALLBACKS)
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_RTC_REGISTER_CALLBACKS)
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_SAI_REGISTER_CALLBACKS)
#define USE_HAL_SAI_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_SMARTCARD_REGISTER_CALLBACKS)
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_SMBUS_REGISTER_CALLBACKS)
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_SPI_REGISTER_CALLBACKS)
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_TIM_REGISTER_CALLBACKS)
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_TSC_REGISTER_CALLBACKS)
#define USE_HAL_TSC_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_UART_REGISTER_CALLBACKS)
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_USART_REGISTER_CALLBACKS)
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_WWDG_REGISTER_CALLBACKS)
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
#endif
#if !defined (USE_HAL_CRYP_SUSPEND_RESUME)
#define USE_HAL_CRYP_SUSPEND_RESUME 0u
#endif
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal Multiple Speed oscillator (MSI) default value.
* This value is the default MSI range value after Reset.
*/
#if !defined (MSI_VALUE)
#define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* MSI_VALUE */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI1) value.
*/
#if !defined (LSI1_VALUE)
#define LSI1_VALUE (32000UL) /*!< LSI1 Typical Value in Hz*/
#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief Internal Low Speed oscillator (LSI2) value.
*/
#if !defined (LSI2_VALUE)
#define LSI2_VALUE (32000UL) /*!< LSI2 Typical Value in Hz*/
#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
/**
* @brief Internal Multiple Speed oscillator (HSI48) default value.
* This value is the default HSI48 range value after Reset.
*/
#if !defined (HSI48_VALUE)
#define HSI48_VALUE (48000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI48_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for SAI1 peripheral
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
* frequency.
*/
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
#define EXTERNAL_SAI1_CLOCK_VALUE (48000UL) /*!< Value of the SAI1 External clock source in Hz*/
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 0U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 1U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32wbxx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32wbxx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_COMP_MODULE_ENABLED
#include "stm32wbxx_hal_comp.h"
#endif /* HAL_COMP_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32wbxx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32wbxx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32wbxx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32wbxx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32wbxx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32wbxx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_HSEM_MODULE_ENABLED
#include "stm32wbxx_hal_hsem.h"
#endif /* HAL_HSEM_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32wbxx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_IPCC_MODULE_ENABLED
#include "stm32wbxx_hal_ipcc.h"
#endif /* HAL_IPCC_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32wbxx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32wbxx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LCD_MODULE_ENABLED
#include "stm32wbxx_hal_lcd.h"
#endif /* HAL_LCD_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32wbxx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32wbxx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_PKA_MODULE_ENABLED
#include "stm32wbxx_hal_pka.h"
#endif /* HAL_PKA_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32wbxx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32wbxx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32wbxx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32wbxx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32wbxx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32wbxx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32wbxx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32wbxx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32wbxx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32wbxx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_TSC_MODULE_ENABLED
#include "stm32wbxx_hal_tsc.h"
#endif /* HAL_TSC_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32wbxx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32wbxx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32wbxx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h" // MBED patch
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* STM32WBxx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
