/* mbed Microcontroller Library
 * SPDX-License-Identifier: BSD-3-Clause
 ******************************************************************************
 *
 * Copyright (c) 2016-2021 STMicroelectronics.
 * All rights reserved.
 *
 * This software component is licensed by ST under BSD 3-Clause license,
 * the "License"; You may not use this file except in compliance with the
 * License. You may obtain a copy of the License at:
 *                        opensource.org/licenses/BSD-3-Clause
 *
 ******************************************************************************
 *
 * Automatically generated from STM32CubeMX/db/mcu/STM32G031K(4-6-8)Tx.xml
 */

/* MBED TARGET LIST: NUCLEO_G031K8 */

#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"
#include "PinNamesTypes.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    ALT0  = 0x100,
    ALT1  = 0x200,
    ALT2  = 0x300,
} ALTx;

typedef enum {
    PA_0       = 0x00,
    PA_1       = 0x01,
    PA_2       = 0x02,
    PA_2_ALT0  = PA_2  | ALT0, // same pin used for alternate HW
    PA_3       = 0x03,
    PA_3_ALT0  = PA_3  | ALT0, // same pin used for alternate HW
    PA_4       = 0x04,
    PA_5       = 0x05,
    PA_6       = 0x06,
    PA_6_ALT0  = PA_6  | ALT0, // same pin used for alternate HW
    PA_7       = 0x07,
    PA_7_ALT0  = PA_7  | ALT0, // same pin used for alternate HW
    PA_7_ALT1  = PA_7  | ALT1, // same pin used for alternate HW
    PA_7_ALT2  = PA_7  | ALT2, // same pin used for alternate HW
    PA_8       = 0x08,
    PA_9       = 0x09,
    PA_10      = 0x0A,
    PA_11      = 0x0B,
    PA_12      = 0x0C,
    PA_13      = 0x0D,
    PA_14      = 0x0E,
    PA_15      = 0x0F,
    PB_0       = 0x10,
    PB_0_ALT0  = PB_0  | ALT0, // same pin used for alternate HW
    PB_1       = 0x11,
    PB_1_ALT0  = PB_1  | ALT0, // same pin used for alternate HW
    PB_1_ALT1  = PB_1  | ALT1, // same pin used for alternate HW
    PB_2       = 0x12,
    PB_3       = 0x13,
    PB_4       = 0x14,
    PB_5       = 0x15,
    PB_6       = 0x16,
    PB_6_ALT0  = PB_6  | ALT0, // same pin used for alternate HW
    PB_7       = 0x17,
    PB_8       = 0x18,
    PB_9       = 0x19,
    PC_6       = 0x26,
    PC_14      = 0x2E,
    PC_15      = 0x2F,
    PF_2       = 0x52,

    /**** ADC internal channels ****/

    ADC_TEMP = 0xF0, // Internal pin virtual value
    ADC_VREF = 0xF1, // Internal pin virtual value
    ADC_VBAT = 0xF2, // Internal pin virtual value

    // Arduino Nano pins
    A0  = PA_0,
    A1  = PA_1,
    A2  = PA_4,
    A3  = PA_5,
    A4  = PA_12,
    A5  = PA_11,
    A6  = PA_6,
    A7  = PA_7,

    D0  = PB_7,
    D1  = PB_6,
    D2  = PA_15,
    D3  = PB_1,
    D4  = PA_10,
    D5  = PA_9,
    D6  = PB_0,
    D7  = PB_2,
    D8  = PB_8,
    D9  = PA_8,
    D10 = PB_9,
    D11 = PB_5,
    D12 = PB_4,
    D13 = PB_3,

    // STDIO for console print
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
    CONSOLE_TX = MBED_CONF_TARGET_STDIO_UART_TX,
#else
    CONSOLE_TX = PA_2,
#endif
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
    CONSOLE_RX = MBED_CONF_TARGET_STDIO_UART_RX,
#else
    CONSOLE_RX = PA_3,
#endif

    /**** OSCILLATOR pins ****/
    RCC_OSC32_EN = PC_15,
    RCC_OSC32_IN = PC_14,
    RCC_OSC32_OUT = PC_15,
    RCC_OSC_EN = PC_15,
    RCC_OSC_IN = PC_14,

    /**** DEBUG pins ****/
    SYS_PVD_IN = PB_7,
    SYS_SWCLK = PA_14,
    SYS_SWDIO = PA_13,
    SYS_WKUP1 = PA_0,
    SYS_WKUP2 = PA_4,
    SYS_WKUP4 = PA_2,
    SYS_WKUP6 = PB_5,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

// Standardized LED and button names
#define LED1     PC_6   // LD3 [Green]


#ifdef __cplusplus
}
#endif

#endif