/*******************************************************************************
* File Name: cycfg_pins.h
*
* Description:
* Pin configuration
* This file was automatically generated and should not be modified.
* Tools Package 2.2.0.2790
* latest-v2.X 2.0.0.6211
* personalities 3.0.0.0
* udd 3.0.0.562
*
********************************************************************************
* Copyright 2020 Cypress Semiconductor Corporation
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
*     http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
********************************************************************************/

#if !defined(CYCFG_PINS_H)
#define CYCFG_PINS_H

#include "cycfg_notices.h"
#include "cy_gpio.h"
#include "cycfg_routing.h"
#if defined (CY_USING_HAL)
	#include "cyhal_hwmgr.h"
#endif //defined (CY_USING_HAL)

#if defined(__cplusplus)
extern "C" {
#endif

#if defined (CY_USING_HAL)
	#define CYBSP_USER_BTN (P0_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA0 (P10_0)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA1 (P10_1)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA2 (P10_2)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA3 (P10_3)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA4 (P10_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIOA5 (P10_5)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_THERM_VDD (P10_6)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_THERM_OUT (P10_7)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_USER_LED (P11_1)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_SS (P11_2)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_D3 (P11_3)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_D2 (P11_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_D1 (P11_5)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_D0 (P11_6)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_QSPI_SCK (P11_7)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_ECO_IN (P12_6)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_ECO_OUT (P12_7)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SPI_MOSI (P5_0)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SPI_MISO (P5_1)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SPI_CLK (P5_2)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SPI_CS (P5_3)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_DEBUG_UART_RX (P5_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_DEBUG_UART_TX (P5_5)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_DEBUG_UART_RTS (P5_6)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_DEBUG_UART_CTS (P5_7)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_I2C_SCL (P6_0)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_I2C_SDA (P6_1)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_UART_RX (P6_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_UART_TX (P6_5)
#endif //defined (CY_USING_HAL)
#define CYBSP_SWDIO_ENABLED 1U
#define CYBSP_SWDIO_PORT GPIO_PRT6
#define CYBSP_SWDIO_PORT_NUM 6U
#define CYBSP_SWDIO_PIN 6U
#define CYBSP_SWDIO_NUM 6U
#define CYBSP_SWDIO_DRIVEMODE CY_GPIO_DM_PULLUP
#define CYBSP_SWDIO_INIT_DRIVESTATE 1
#ifndef ioss_0_port_6_pin_6_HSIOM
	#define ioss_0_port_6_pin_6_HSIOM HSIOM_SEL_GPIO
#endif
#define CYBSP_SWDIO_HSIOM ioss_0_port_6_pin_6_HSIOM
#define CYBSP_SWDIO_IRQ ioss_interrupts_gpio_6_IRQn
#if defined (CY_USING_HAL)
	#define CYBSP_SWDIO_HAL_PORT_PIN P6_6
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDIO P6_6
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDIO_HAL_IRQ CYHAL_GPIO_IRQ_NONE
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDIO_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL 
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDIO_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_PULLUP
#endif //defined (CY_USING_HAL)
#define CYBSP_SWDCK_ENABLED 1U
#define CYBSP_SWDCK_PORT GPIO_PRT6
#define CYBSP_SWDCK_PORT_NUM 6U
#define CYBSP_SWDCK_PIN 7U
#define CYBSP_SWDCK_NUM 7U
#define CYBSP_SWDCK_DRIVEMODE CY_GPIO_DM_PULLDOWN
#define CYBSP_SWDCK_INIT_DRIVESTATE 1
#ifndef ioss_0_port_6_pin_7_HSIOM
	#define ioss_0_port_6_pin_7_HSIOM HSIOM_SEL_GPIO
#endif
#define CYBSP_SWDCK_HSIOM ioss_0_port_6_pin_7_HSIOM
#define CYBSP_SWDCK_IRQ ioss_interrupts_gpio_6_IRQn
#if defined (CY_USING_HAL)
	#define CYBSP_SWDCK_HAL_PORT_PIN P6_7
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDCK P6_7
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDCK_HAL_IRQ CYHAL_GPIO_IRQ_NONE
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDCK_HAL_DIR CYHAL_GPIO_DIR_BIDIRECTIONAL 
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_SWDCK_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_PULLDOWN
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO5 (P8_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO13 (P9_0)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO12 (P9_1)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO11 (P9_2)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO10 (P9_3)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO9 (P9_4)
#endif //defined (CY_USING_HAL)
#if defined (CY_USING_HAL)
	#define CYBSP_GPIO6 (P9_7)
#endif //defined (CY_USING_HAL)

extern const cy_stc_gpio_pin_config_t CYBSP_SWDIO_config;
#if defined (CY_USING_HAL)
	extern const cyhal_resource_inst_t CYBSP_SWDIO_obj;
#endif //defined (CY_USING_HAL)
extern const cy_stc_gpio_pin_config_t CYBSP_SWDCK_config;
#if defined (CY_USING_HAL)
	extern const cyhal_resource_inst_t CYBSP_SWDCK_obj;
#endif //defined (CY_USING_HAL)

void init_cycfg_pins(void);

#if defined(__cplusplus)
}
#endif


#endif /* CYCFG_PINS_H */