/* mbed Microcontroller Library
 * SPDX-License-Identifier: BSD-3-Clause
 ******************************************************************************
 *
 * Copyright (c) 2021 STMicroelectronics.
 * All rights reserved.
 *
 * This software component is licensed by ST under BSD 3-Clause license,
 * the "License"; You may not use this file except in compliance with the
 * License. You may obtain a copy of the License at:
 *                        opensource.org/licenses/BSD-3-Clause
 *
 ******************************************************************************
 */

#if DEVICE_ANALOGIN

#include "analogin_api.h"
#include "mbed_assert.h"
#include "mbed_error.h"
#include "mbed_debug.h"
#include "cmsis.h"
#include "pinmap.h"
#include "PeripheralPins.h"


#if STATIC_PINMAP_READY
#define ANALOGIN_INIT_DIRECT analogin_init_direct
void analogin_init_direct(analogin_t *obj, const PinMap *pinmap)
#else
#define ANALOGIN_INIT_DIRECT _analogin_init_direct
static void _analogin_init_direct(analogin_t *obj, const PinMap *pinmap)
#endif
{
    uint32_t function = (uint32_t)pinmap->function;

    // Get the peripheral name from the pin and assign it to the object
    obj->handle.Instance = (ADC_TypeDef *)pinmap->peripheral;

    // ADC Internal Channels "pins"  (Temperature, Vref, Vbat, ...)
    //   are described in PinNames.h and PeripheralPins.c
    //   Pin value must be between 0xF0 and 0xFF
    if ((pinmap->pin < 0xF0) || (pinmap->pin >= 0x100)) {
        // Normal channels

        // Configure GPIO
        pin_function(pinmap->pin, pinmap->function);
        pin_mode(pinmap->pin, PullNone);
    } else {
        // Internal channels
        // No GPIO configuration for internal channels
    }
    MBED_ASSERT(obj->handle.Instance != (ADC_TypeDef *)NC);
    MBED_ASSERT(function != (uint32_t)NC);

    obj->channel = STM_PIN_CHANNEL(function);

    // Save pin number for the read function
    obj->pin = pinmap->pin;

    // Configure ADC object structures
    obj->handle.State = HAL_ADC_STATE_RESET;
    obj->handle.Init.ClockPrescaler        = ADC_CLOCK_ASYNC_DIV2;
    obj->handle.Init.Resolution            = ADC_RESOLUTION_12B;
    obj->handle.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
    obj->handle.Init.ScanConvMode          = ADC_SCAN_DISABLE;
    obj->handle.Init.EOCSelection          = ADC_EOC_SINGLE_CONV;
    obj->handle.Init.LowPowerAutoWait      = DISABLE;
    obj->handle.Init.ContinuousConvMode    = DISABLE;
    obj->handle.Init.NbrOfConversion       = 1;
    obj->handle.Init.DiscontinuousConvMode = DISABLE;
    obj->handle.Init.ExternalTrigConv      = ADC_SOFTWARE_START;
    obj->handle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
    obj->handle.Init.DMAContinuousRequests = DISABLE;
    obj->handle.Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN;
    obj->handle.Init.LowPowerAutoPowerOff  = DISABLE;
    obj->handle.Init.SamplingTimeCommon1   = ADC_SAMPLETIME_19CYCLES_5;
    obj->handle.Init.SamplingTimeCommon2   = ADC_SAMPLETIME_160CYCLES_5;
    obj->handle.Init.OversamplingMode      = DISABLE;
    obj->handle.Init.Oversampling.Ratio    = 0;      // workaround
    obj->handle.Init.Oversampling.RightBitShift = 0; // workaround
    obj->handle.Init.Oversampling.TriggeredMode = 0; // workaround
    obj->handle.Init.TriggerFrequencyMode  = ADC_TRIGGER_FREQ_HIGH;

    // Enable ADC clock
    __HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_SYSCLK);
    __HAL_RCC_ADC_CLK_ENABLE();

    if (HAL_ADC_Init(&obj->handle) != HAL_OK) {
        error("Cannot initialize ADC");
    }

    // ADC calibration is done only once
    if (!HAL_ADCEx_Calibration_GetValue(&obj->handle)) {
        if (HAL_ADCEx_Calibration_Start(&obj->handle) != HAL_OK) {
            error("HAL_ADCEx_Calibration_Start error");
        }
    }
}

void analogin_init(analogin_t *obj, PinName pin)
{
    int peripheral;
    int function;

    if ((pin < 0xF0) || (pin >= 0x100)) {
        peripheral = (int)pinmap_peripheral(pin, PinMap_ADC);
        function = (int)pinmap_find_function(pin, PinMap_ADC);
    } else {
        peripheral = (int)pinmap_peripheral(pin, PinMap_ADC_Internal);
        function = (int)pinmap_find_function(pin, PinMap_ADC_Internal);
    }

    const PinMap static_pinmap = {pin, peripheral, function};

    ANALOGIN_INIT_DIRECT(obj, &static_pinmap);
}


uint16_t adc_read(analogin_t *obj)
{
    ADC_ChannelConfTypeDef sConfig = {0};

    sConfig.Rank         = ADC_REGULAR_RANK_1;
    sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;

    switch (obj->channel) {
        case 0:
            sConfig.Channel = ADC_CHANNEL_0;
            break;
        case 1:
            sConfig.Channel = ADC_CHANNEL_1;
            break;
        case 2:
            sConfig.Channel = ADC_CHANNEL_2;
            break;
        case 3:
            sConfig.Channel = ADC_CHANNEL_3;
            break;
        case 4:
            sConfig.Channel = ADC_CHANNEL_4;
            break;
        case 5:
            sConfig.Channel = ADC_CHANNEL_5;
            break;
        case 6:
            sConfig.Channel = ADC_CHANNEL_6;
            break;
        case 7:
            sConfig.Channel = ADC_CHANNEL_7;
            break;
        case 8:
            sConfig.Channel = ADC_CHANNEL_8;
            break;
        case 9:
            sConfig.Channel = ADC_CHANNEL_9;
            break;
        case 10:
            sConfig.Channel = ADC_CHANNEL_10;
            break;
        case 11:
            sConfig.Channel = ADC_CHANNEL_11;
            break;
        case 12:
            sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
            sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_2;
            break;
        case 13:
            sConfig.Channel = ADC_CHANNEL_VREFINT;
            sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_2;
            break;
        case 14:
            sConfig.Channel = ADC_CHANNEL_VBAT;
            sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_2;
            break;
        default:
            return 0;
    }

    if (HAL_ADC_ConfigChannel(&obj->handle, &sConfig) != HAL_OK) {
        debug("HAL_ADC_ConfigChannel error\n");
    }

    if (HAL_ADC_Start(&obj->handle) != HAL_OK) {
        debug("HAL_ADC_Start error\n");
    }

    // Wait end of conversion and get value
    uint16_t adcValue = 0;
    if (HAL_ADC_PollForConversion(&obj->handle, 100) == HAL_OK) {
        adcValue = (uint16_t)HAL_ADC_GetValue(&obj->handle);
    }

    LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE((&obj->handle)->Instance), LL_ADC_PATH_INTERNAL_NONE);

    return adcValue;
}


const PinMap *analogin_pinmap()
{
    return PinMap_ADC;
}

#endif