Deprecate instead of remove index_type

mstd::span rename index_type to size_type according to spec

Merge pull request #15177 from danluck/master ...

Fix overflow at extremely low RSSI

Merge pull request #15178 from ATmobica/master ...

Add netbuf-recvinfo-enabled config to LWIP settings

Add netbuf-recvinfo-enabled config to LWIP mbed_lib.json

Fix overflow at extremely low RSSI ...

Some LoRaWAN modem like SX1272 can receive downlink packets with RSSI level less than -127. So "int8_t" is not enough for store all possible RSSI values. For example, SX1272 has sensitivity at -137 dBm.
Problem was manifested in the file "SX1272_LoRaRadio.cpp" at SX1272_LoRaRadio::handle_dio0_irq() method.
When value of _rf_settings.lora_packet_handler.rssi_value calculated incorrect RSSI will be stored. Example case:

Value readen from register REG_LR_PKTSNRVALUE _rf_settings.lora_packet_handler.snr_value equals -47.
Value readen from register REG_LR_PKTRSSIVALUE equals 17.
RSSI_OFFSET equals "-139", snr equals "-11".

For case MODEM_LORA value calculated by formula:
_rf_settings.lora_packet_handler.rssi_value = RSSI_OFFSET + rssi + (rssi >> 4) + snr;
and result value will be "124" because of int8_t overflow so it's not correct value (too high).

Correct value must be:
-139 + 17 + (1) + (-11) = -132.

Another motivation: at all other places int16_t type used to store RSSI value.

Update Mbed version block

Merge pull request #15174 from OpenNuvoton/nuvoton_m2354_tfm_sram-bank_sector-map_scratch ...

M2354: Fix potential issues in TF-M

Merge pull request #15169 from jeromecoutant/OSPI_U5 ...

B_U585I_IOT02A supports OSPI

M2354: Fix potential issues in TF-M ...

Fix the following issues in TF-M to avoid emergence in the future:
1.  Enable initial stack not located in SRAM bank0
    On reset, only SRAM bank0 is enabled. And SRAM bank1/2 will be enabled in immediately following SystemInit().
    When initial stack is located in SRAM bank1/2, we will meet trouble because SystemInit() itself needs to use initial stack.
    To conquer the dilemma, we add preceding code in front of original Systeminit(), which is responsible for enabling SRAM bank1/2 and guarantees no using initial stack.
2.  Fix sector maps of internal/external (SDH) Flash are incompatible, caused by TF-M's MCUboot port.
    This is done by adapting external (SDH) Flash sector size to internal Flash's.
3.  Enlarge firmware upgrade scratch size. There are two advantages:
    (1) Get around MCUboot limit which requires scratch size not smaller than image trailer size
    (2) Improve wear leveling for the scratch area

B_U585I_IOT02A supports OSPI

Merge pull request #15111 from world-direct/feature/dtlserror ...

DTLSSocket - destruction while handshaking lead to error

Merge pull request #15153 from bakatrouble/master ...

STM32F722ZE port

Merge pull request #15164 from jeromecoutant/PR_L151CB ...

STM32L1: add support of MCU_STM32L151xB

Merge pull request #15166 from world-direct/feature/googletestversion ...

Change google test git tag to main

Change google test git tag to main ...

google test changed from master to main branch

STM32L1: add support of MCU_STM32L151xB ...

for custom boards like RAK811

Merge pull request #14610 from jeromecoutant/DEV_SLEEP_TRACE ...

Power management stat : add verbosity level for MBED_SLEEP_TRACING_ENABLED

Merge pull request #15152 from sytsereitsma/minimal_printf_float_rounding ...

Fix rounding bug when formatting floats with minimal_printf

STM32: readme update for MBED_SLEEP_TRACING_ENABLED

Power management stat : add verbosity level for MBED_SLEEP_TRACING_ENABLED ...

Full verbosity is adding a console line for each lock/unlock API call

- stats can be enabled with json config
- default configuration is full verbosity and add a console line for each lock/unlock command
- for STM32 targets, verbosity is reduced by default

Merge pull request #15161 from OpenNuvoton/nuvoton_m2354_tfm_aws-iot ...

M2354: Adjust TF-M configuration to fit AWS IoT application

Code style violation corrected

Fixed floating point formatting ...

When decimal_prec is 0 and the value is negative and needs rounding subtract 1, instead of adding 1
When decimal_prec > 0 round before printing the integer part, instead of after

Added unit test for floating point formatting ...

And added a bonus test for string padding

M2354: Adjust TF-M configuration to fit AWS IoT ...

1.  In TF-M, enlarge ITS max asset number/size
    NOTE: RSA key size is larger
2.  In TF-M, enlarge mbedtls dedicated heap
    NOTE: RSA algorithm needs more memory.
    NOTE: psa_aead_decrypt() (for mbedtls_ssl_read()) needs memory proportional to data size.

Add STM32F722ZE target

Support missing SPI6 on STM32F7

Support different STM32F7 flash configurations

Allow STM32F7 targets without Ethernet