Synchronize upstream changes - May 2023 edition (#160) ...

* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436

* Fix mesh connect semaphore not releasing causing blockage

* Add support of NSAPI_ICMP sockets in Nanostack

* STM32F1: add MCU_STM32F103xD support

* STM32F1: add MCU_STM32F103xG support

* test: Disable failing tests due to echo server

Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.

Signed-off-by: Saheer Babu <saheer.babu@arm.com>

* Check CAN DLC length value

* Fix default interface ID only being used partially

If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.

* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.

Signed-off-by: Yilin Sun <imi415@imi.moe>

* CAN: read only up to 8 bytes

If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.

This fixes https://github.com/ARMmbed/mbed-os/issues/15361

Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>

* STM32F303xC: add RAM_CCM in GCC linker script

* fix(drivers/emac): Remove incorrect RMII RX ER initialization

* fix(drivers/emac): Add missing SPDX indetifier to ST driver files

* fixed compiler inline issue

* Update Mbed version block

* removed HSE speed limitation for STM32G431RB

* Added HSE range validation for STM32g431xB

* added support for 4, 8 and 16MHz

* M487: Remove unused variable 'u32EscapeFrame'

Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings

* force FIFO IRQ for FDCan RX on H7

* Add hardware CRC support to STM32G4

* add support for Nucleo-H745ZI

* Update MAX32670 peripheral drivers with final ones that use by SDK

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* MAX32670 apply mbed required changes on peripheral drivers

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* M467: Support CAN bus

1.  Update BSP CANFD driver
2.  Notes for implementation
    (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
    (2) For Rx disabling multiple filter handles,
        1)  Map all filter handles to filter handle 0
        2)  Use Rx FIFO 0 for filter handle 0
    (3) For Rx enabling multiple filter handles,
        1)  Use Rx FIFO 0 for filter handle 0
        2)  Use Rx FIFO 1 for filter handle through first invoking can_filter()
        3)  Use dedicated Rx Buffer for other filter handles
        NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
    (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
    (5) Support no CAN FD.

* Fix 'new[]' array freed with 'delete'

The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.

* Define default parameters of functions of derived class the same as the base class

The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.

* Avoid calling virtual functions from constructors and destructors

Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.

* Fix potentially overrunning write of sprintf

Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.

* Fix system_clock.c location

Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>

* Fix variable name

Signed-off-by: Jasper <jasper.jonker@wingtra.com>

* Change storage-class of secret_buf to static

Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.

* fix compiling errors of FATFileSystem when exFAT was enabled

* Add OSPI support for STM32H7

* Nuvoton: Enable extending sampling time for ADC/EADC

For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.

---------

Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>

Teensy 4.1 port with Ethernet support (#144) ...

* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL

* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code

* Revert some testing changes

* Fix incorrect phy address used outside of low_level_init_successful()

* Ethernet operational!

* Turn off DEBUG_IMX_EMAC

* Style fixes

* Style again

* Bugfix: mbed_lib.json files in project source dir were not getting picked up

* Bugfix: CLion debug configurations not generated properly due to variables going out of scope

* Support Teensy OTP MAC address

Update for Doxygen 1.9.5 (#119) ...

* Update for Doxygen 1.9.5

* Also update doxygen version in docs.yaml

* Also fix Doxygen version in basic_checks.yaml

Fix all Doxygen errors and make any future errors fatal (#118) ...

* Start working on fixing doxygen warnings

* Upgrade doxyfile to Doxygen 1.9.1

* Clean up some unmatched groups and add some exclusions

* Fix docs for rtos::ThisThread not showing up

* Fix up KV store docs

* Fix incorrect @files, some more incorrect groups

* Fix lots of broken links

* Start fixing mbedtls groups

* Fix more mbedtls docs

* Fix remaining mbedtls files with missing or incorrect grouping

* Fix a huge amount of PSA docs errors

* Fix a few more mbedtls docs errors

* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors

* Fix some broken doc links in HAL headers

* Fix more PSA doc errors

* Fix some doxygen errors in networking code

* Fix lots of network related doc errors

* Try and fix some CI failures

* Use Doxygen Action instead of doxygen in Mbed container to get the right version

* Try removing docs check

* Add first part of doxygen action

* Add next part of doxygen action

* Fix yaml syntax error

* Add in license check fix

* Try using verbose scancode

* Fix some more docs issues, workaround scancode-toolkit#3179

* Clean up the LoRaRadio get_state() function on each implementation.  Also fix some other compile and doc errors.

* Fix all remaining doxygen errors

* Fix escaping, for realsies this time

* Remove Doxygen unsupported config options, fix some more get_status() declarations

* Fix some UNITTESTS build errors

* Fix one more compile error

* Another unittest error

Clean up group/module definitions in doxygen (#97) ...

* Clean up group definitions in doxygen

* remove THIRD_PARTY_DOCS

* some stragglers

* fix astyle formatting

Don't use whole-archive linking (#71) ...

* First attempt at converting to OBJECT libraries.  Not working due to more object library limitations

* Only compile the main libraries as OBJECT, because that's all that CMake can be made to do right now.

* Fix availability of target-specific flags

* Missed some usages

* Fix some STM32 ethernet stuff that was not linking correctly

* More fixes for STM32 ethernet and weak symbols

* Fix prebuilt object file linking for MUSCA_S1

* Fix STM32 eth init license headers

Fix event queue being stuck in non-RTOS mode, causing all sorts of weird behavior

Fix ABI differences between mbed-baremetal and mbed-os, remove PlatformMutex

Rename inconsistently named testing-related variables. Also fix STM32CUBE not working from application code.

Move unit test to match file

Convert emac, cellular, and wifi targets, and enable one UDP test

Convert nanostack and lwipstack to STATIC libraries

Clean up top-level build file and build options, fix build issues on MinGW

Merge pull request #15111 from world-direct/feature/dtlserror ...

DTLSSocket - destruction while handshaking lead to error

Merge pull request #15068 from jeromecoutant/PR_INTERFACE ...

connectivity tests: avoid HardFault with null pointer

cmake : enable wifi in netsocket

DTLSSocket handshake timeout calls object functions even if object is destructed. Fixed by removing timeout event from event queue on close/destruction.

connectivity tests: avoid crash with null pointer

connectivity-netsocket-tests-tests-network-wifi update2 ...

- add minor print to make debug easier
- remove not useful part

connectivity-netsocket-tests-tests-network-wifi update ...

Use default NSAPI configuration

Merge pull request #15040 from mat-kalinowski/sendrecv_message ...

New feature: send/recv message implementation added to network stack

Merge pull request #15010 from world-direct/feature/reduceTLSspam ...

Reduce spam on trace because of calling read/write while handshaking

Moving alignment information in the nsapi_msghdr_t ...

Macro MBED_ALIGN expands in C to _Alignas which can't be used in the
type declaration. This patch moves it to the first type definition
which makes this code compile properly in CPP and C.

Removing FIXME comment and adding empty line in the test file

Fixing documentation errors ...

Minor errors in the documentation were fixed. These caused failure
of the doxygen checks in the PR.

Adding documentation and minor code changes ...

Doxygen documentation for MsgHeaderIterator was added. Type used
for alignment of the nsapi_msghdr_t struct was changed.

Code improvements for the unresolved comments ...

This patch contains improvements mentioned in the unresolved PR
comments:
- function names were changed from socket_sendmsg/socket_recvmsg to
  socket_sendto_control/socket_recvfrom_control.
- default implementation of this functions was provided in the
  NetworkStack class.
- MsgHeaderIterator accesses elements on the aligned addresses.

New feature: send/recv message implementation added to network stack

prevent spam of console

CMake: Add option to enable greentea tests ...

Add an option to enable the greentea tests independently from the unit
tests.

We can't just use the typical BUILD_TESTING option to enable greentea
tests. BUILD_TESTING enables unit tests and fetches googletest, which
are compiled for the host. Greentea tests are cross compiled and require
a toolchain file. For this reason we add a new option just to enable
greentea tests, preventing build failures triggered by the unit tests
and googletest.