Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.

To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.

Fixes #10319

This commit does not bring functional changes.
Here is the list of changes:
- merge CMSDK_CM3DS.h and SMM_MPS2.h into CM3DS.h
- remove unused code
- split copyright headers from first comment of each file

Change-Id: I79b7ee01689439b7d2fde9d13035a5edf17f69ff
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>

This patch changes the linker files and defines to use the ZBT SSRAM
instead of the FPGA Block RAM for code and data.
The section 4.1.1, Code and RAM memory map, of the CM3DS Eval RTL and
testbench user guide explains the available memories.
This switch improves code memory from 256 kB to 4 MB and data memory
from 128 kB to 4 MB.

However, the ZBT SSRAM1 for code memory begins at 0x00400000 while the
processor can only boot at address 0x00000000 which means that it
expects the vector table to be at that address. That is why we have to
create 2 load regions in the linker scripts: one with only the vector
table at address 0x0 and one with code + data at address 0x00400000.
Because of these two load regions, linker will produce different
behaviours:
    * GCC_ARM and IAR will only create 1 binary with both load regions
padding with 0 in between. The binary will then be very large (at least
4 MB) and the flash process will take longer.
    * ARM and ARMC6 will create 2 binaries for the two load regions. The
load addresses of the two binaries can be written in the images.txt file
on the MPS2 board. You can also use the --bincombined option of fromelf
utility to produce only 1 large binary.

This patch also adds the memory_zones.h file to try to put in common all
the memory addresses that were previously hard coded in the linker
scripts / startup files.

With that patch in, the simplest option is to directly use the .elf file
with the MPS2, which is only possible with mbb_v225.ebf and more recent
firmwares. It will now be the default for CM3DS.

This commit works with greentea thanks to the now merged pull request
ARMmbed/htrun#181 in order to copy .elf file to the MPS2 board.

Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>

1. Add startup code and linker script for IAR and
   GCC_ARM compilers.
2. Enable IAR and GCC_ARM compilers in targets.json.

Change-Id: I742a89ae73a4e5ede980a8af0821c3f0e5a461ef
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>

- Creates new target in targets.json
 - Creates device specific files under ARM_SSG/CM3DS_MPS2 directory
 - Driver layer files under CM3DS_MPS2 are based on Beid target
 - Device specific files under CM3DS_MPS2/device are based on CMSIS_5 and Beetle

Change-Id: I29ea7a7f42b11cf25b516cce4b9255ab828ca019
Signed-off-by: Tamas Kaman <Tamas.Kaman@arm.com>
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>