Synchronize upstream changes - May 2023 edition (#160) ...

* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436

* Fix mesh connect semaphore not releasing causing blockage

* Add support of NSAPI_ICMP sockets in Nanostack

* STM32F1: add MCU_STM32F103xD support

* STM32F1: add MCU_STM32F103xG support

* test: Disable failing tests due to echo server

Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.

Signed-off-by: Saheer Babu <saheer.babu@arm.com>

* Check CAN DLC length value

* Fix default interface ID only being used partially

If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.

* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.

Signed-off-by: Yilin Sun <imi415@imi.moe>

* CAN: read only up to 8 bytes

If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.

This fixes https://github.com/ARMmbed/mbed-os/issues/15361

Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>

* STM32F303xC: add RAM_CCM in GCC linker script

* fix(drivers/emac): Remove incorrect RMII RX ER initialization

* fix(drivers/emac): Add missing SPDX indetifier to ST driver files

* fixed compiler inline issue

* Update Mbed version block

* removed HSE speed limitation for STM32G431RB

* Added HSE range validation for STM32g431xB

* added support for 4, 8 and 16MHz

* M487: Remove unused variable 'u32EscapeFrame'

Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings

* force FIFO IRQ for FDCan RX on H7

* Add hardware CRC support to STM32G4

* add support for Nucleo-H745ZI

* Update MAX32670 peripheral drivers with final ones that use by SDK

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* MAX32670 apply mbed required changes on peripheral drivers

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* M467: Support CAN bus

1.  Update BSP CANFD driver
2.  Notes for implementation
    (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
    (2) For Rx disabling multiple filter handles,
        1)  Map all filter handles to filter handle 0
        2)  Use Rx FIFO 0 for filter handle 0
    (3) For Rx enabling multiple filter handles,
        1)  Use Rx FIFO 0 for filter handle 0
        2)  Use Rx FIFO 1 for filter handle through first invoking can_filter()
        3)  Use dedicated Rx Buffer for other filter handles
        NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
    (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
    (5) Support no CAN FD.

* Fix 'new[]' array freed with 'delete'

The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.

* Define default parameters of functions of derived class the same as the base class

The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.

* Avoid calling virtual functions from constructors and destructors

Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.

* Fix potentially overrunning write of sprintf

Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.

* Fix system_clock.c location

Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>

* Fix variable name

Signed-off-by: Jasper <jasper.jonker@wingtra.com>

* Change storage-class of secret_buf to static

Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.

* fix compiling errors of FATFileSystem when exFAT was enabled

* Add OSPI support for STM32H7

* Nuvoton: Enable extending sampling time for ADC/EADC

For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.

---------

Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>

Remove all source files exclusive to Arm Compiler and IAR (#159) ...

* Remove all source files exclusive to Arm Compiler and IAR

* Also remove 'TOOLCHAIN_ARM'

* Remove targets.json entries for ARM and IAR

mbed-ce@master + fixes + gcc 11 support (#135) ...

* Fix rtos::Mutex stub, add trylock() method

* LowPowerTicker - Add ::attach(...) method + call callback

* mbed_power_management - rename sleep --> mbed_sleep to avoid conflicts

Fixes conflicts w/ unistd.h and boost::ut

* GCC 11/C++ 20 - Remove deprecated type_traits

* GCC 11/C++ 20 - Remove redundant templating of methods

* Warning - pragma ignore invalid-noreturn for unit tests

* Fix astyle errors

* Fix missing mbed_sleep() calls

Update for Doxygen 1.9.5 (#119) ...

* Update for Doxygen 1.9.5

* Also update doxygen version in docs.yaml

* Also fix Doxygen version in basic_checks.yaml

Fix all Doxygen errors and make any future errors fatal (#118) ...

* Start working on fixing doxygen warnings

* Upgrade doxyfile to Doxygen 1.9.1

* Clean up some unmatched groups and add some exclusions

* Fix docs for rtos::ThisThread not showing up

* Fix up KV store docs

* Fix incorrect @files, some more incorrect groups

* Fix lots of broken links

* Start fixing mbedtls groups

* Fix more mbedtls docs

* Fix remaining mbedtls files with missing or incorrect grouping

* Fix a huge amount of PSA docs errors

* Fix a few more mbedtls docs errors

* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors

* Fix some broken doc links in HAL headers

* Fix more PSA doc errors

* Fix some doxygen errors in networking code

* Fix lots of network related doc errors

* Try and fix some CI failures

* Use Doxygen Action instead of doxygen in Mbed container to get the right version

* Try removing docs check

* Add first part of doxygen action

* Add next part of doxygen action

* Fix yaml syntax error

* Add in license check fix

* Try using verbose scancode

* Fix some more docs issues, workaround scancode-toolkit#3179

* Clean up the LoRaRadio get_state() function on each implementation.  Also fix some other compile and doc errors.

* Fix all remaining doxygen errors

* Fix escaping, for realsies this time

* Remove Doxygen unsupported config options, fix some more get_status() declarations

* Fix some UNITTESTS build errors

* Fix one more compile error

* Another unittest error

Clean up group/module definitions in doxygen (#97) ...

* Clean up group definitions in doxygen

* remove THIRD_PARTY_DOCS

* some stragglers

* fix astyle formatting

Enable Arduino Nano 33 BLE (#55) ...

* Add upload target for Arduino Nano 33 BLE, fix linker script preprocessing, add option for USB serial by default

* astyle error

* Use HINTS instead of PATHS so that the Arduino dir is searched first

* Enable OpenOCD and PyOCD for Nano 33 BLE in SWD mode

* Fix missing dependency for USB tests on Windows

* Add RAM defines for nrf52840

* Fix mbed-storage-kv-config depending on SD card library even if said library was not enabled

* Update dsrdtr value

* No longer need to modify linker script now that we aren't using whole-archive!

* Add OPENOCD_ADAPTER_SERIAL

* Add handling for cmsis dap

* Fix typo

* Fix weak symbol issue causing Bluetooth to not work.  In this case, the weak implementation can simply be removed, because there's no legitimate case where it is used.

Don't use whole-archive linking (#71) ...

* First attempt at converting to OBJECT libraries.  Not working due to more object library limitations

* Only compile the main libraries as OBJECT, because that's all that CMake can be made to do right now.

* Fix availability of target-specific flags

* Missed some usages

* Fix some STM32 ethernet stuff that was not linking correctly

* More fixes for STM32 ethernet and weak symbols

* Fix prebuilt object file linking for MUSCA_S1

* Fix STM32 eth init license headers

Change default serial baudrate to 115200 (#58)

Add SingletonPtr.cpp to unittests source

Fix some build errors

Fix ABI differences between mbed-baremetal and mbed-os, remove PlatformMutex

Rename inconsistently named testing-related variables. Also fix STM32CUBE not working from application code.

Convert emac, cellular, and wifi targets, and enable one UDP test

Convert nanostack and lwipstack to STATIC libraries

Add core flags dependency back to the target flags, making sure that the core flags headers actually work

Fix PSA target, fix create_distro to not recurse into static libraries

Only support GCC ARM compiler, but reap the benefits of static libraries instead of objects

Fix PSA and MUSCA build

- Split mbed-core and mbed-rtos into -sources and -flags targets ...

- Fix some logic errors in top level cmakelists related to building greentea tests
- Fix mbed_create_distro() for OBJECT libraries

Clean up top-level build file and build options, fix build issues on MinGW

Update Mbed version block

semihosting: Fix typo in semihost_rename ...

Fix typo in semihost_rename. Now it actually sends the `new_name` as well as the `old_name`.

Fix strrchr() not declared for IAR ...

For IAR, strrchr() is used in MBED_FILENAME macro definition. Declare it via string.h to fix compile error when MBED_FILENAME is expanded.

Use MBED_FILENAME instead of __FILE__ in MBED_ASSERT ...

To actually get the filename in the error reporting struct instead of
the start of the path, let's use the MBED_FILENAME macro that MBED_ERROR
et al uses.

Allow unit tests to be compiled with -fno-exception

Deprecate instead of remove index_type

mstd::span rename index_type to size_type according to spec

Update Mbed version block

Merge pull request #14610 from jeromecoutant/DEV_SLEEP_TRACE ...

Power management stat : add verbosity level for MBED_SLEEP_TRACING_ENABLED