2014-05-07 |
Optimise data cache clean/invalidate operation
...
The data cache clean and invalidate operations dcsw_op_all()
and dcsw_op_loius() were implemented to invoke a DSB and ISB
barrier for every set/way operation. This adds a substantial
performance penalty to an already expensive operation.
These functions have been reworked to provide an optimised
implementation derived from the code in section D3.4 of the
ARMv8 ARM. The helper macro setup_dcsw_op_args has been moved
and reworked alongside the implementation.
Fixes ARM-software/tf-issues#146
Change-Id: Icd5df57816a83f0a842fce935320a369f7465c7f
Andrew Thoelke
committed
on 7 May 2014
|
Remove unused or invalid asm helper functions
...
There are a small number of non-EL specific helper functions
which are no longer used, and also some unusable helper
functions for non-existant registers.
This change removes all of these functions.
Change-Id: Idd656cef3b59cf5c46fe2be4029d72288b649c24
Andrew Thoelke
committed
on 7 May 2014
|
Access system registers directly in assembler
...
Instead of using the system register helper functions to read
or write system registers, assembler coded functions should
use MRS/MSR instructions. This results in faster and more
compact code.
This change replaces all usage of the helper functions with
direct register accesses.
Change-Id: I791d5f11f257010bb3e6a72c6c5ab8779f1982b3
Andrew Thoelke
committed
on 7 May 2014
|
Replace disable_mmu with assembler version
...
disable_mmu() cannot work as a C function as there is no control
over data accesses generated by the compiler between disabling and
cleaning the data cache. This results in reading stale data from
main memory.
As assembler version is provided for EL3, and a variant that also
disables the instruction cache which is now used by the BL1
exception handling function.
Fixes ARM-software/tf-issues#147
Change-Id: I0cf394d2579a125a23c2f2989c2e92ace6ddb1a6
Andrew Thoelke
committed
on 7 May 2014
|
Correct usage of data and instruction barriers
...
The current code does not always use data and instruction
barriers as required by the architecture and frequently uses
barriers excessively due to their inclusion in all of the
write_*() helper functions.
Barriers should be used explicitly in assembler or C code
when modifying processor state that requires the barriers in
order to enable review of correctness of the code.
This patch removes the barriers from the helper functions and
introduces them as necessary elsewhere in the code.
PORTING NOTE: check any port of Trusted Firmware for use of
system register helper functions for reliance on the previous
barrier behaviour and add explicit barriers as necessary.
Fixes ARM-software/tf-issues#92
Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf
Andrew Thoelke
committed
on 7 May 2014
|
Set processor endianness immediately after RESET
...
SCTLR_EL3.EE is being configured too late in bl1_arch_setup() and
bl31_arch_setup() after data accesses have already occured on
the cold and warm boot paths.
This control bit must be configured immediately on CPU reset to
match the endian state of the firmware (little endian).
Fixes ARM-software/tf-issues#145
Change-Id: Ie12e46fbbed6baf024c30beb50751591bb8c8655
Andrew Thoelke
committed
on 7 May 2014
|
2014-05-06 |
Merge pull request #49 from danh-arm/dh/remove-non-const-data
...
Remove variables from .data section
danh-arm
committed
on 6 May 2014
|
Remove variables from .data section
...
Update code base to remove variables from the .data section,
mainly by using const static data where possible and adding
the const specifier as required. Most changes are to the IO
subsystem, including the framework APIs. The FVP power
management code is also affected.
Delay initialization of the global static variable,
next_image_type in bl31_main.c, until it is realy needed.
Doing this moves the variable from the .data to the .bss
section.
Also review the IO interface for inconsistencies, using
uintptr_t where possible instead of void *. Remove the
io_handle and io_dev_handle typedefs, which were
unnecessary, replacing instances with uintptr_t.
Fixes ARM-software/tf-issues#107.
Change-Id: I085a62197c82410b566e4698e5590063563ed304
Dan Handley
committed
on 6 May 2014
|
Merge pull request #48 from danh-arm/dh/major-refactoring
...
dh/major refactoring
danh-arm
committed
on 6 May 2014
|
Reduce deep nesting of header files
...
Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.
Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.
Fixes ARM-software/tf-issues#31
Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e
Dan Handley
committed
on 6 May 2014
|
Always use named structs in header files
...
Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).
Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.
Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.
Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f
Dan Handley
committed
on 6 May 2014
|
Move PSCI global functions out of private header
...
Move the PSCI global functions out of psci_private.h and into
psci.h to allow the standard service to only depend on psci.h.
Change-Id: I8306924a3814b46e70c1dcc12524c7aefe06eed1
Dan Handley
committed
on 6 May 2014
|
Separate BL functions out of arch.h
...
Move the BL function prototypes out of arch.h and into the
appropriate header files to allow more efficient header file
inclusion. Create new BL private header files where there is no
sensible existing header file.
Change-Id: I45f3e10b72b5d835254a6f25a5e47cf4cfb274c3
Dan Handley
committed
on 6 May 2014
|
Refactor GIC header files
...
Move the function prototypes from gic.h into either gic_v2.h or
gic_v3.h as appropriate. Update the source files to include the
correct headers.
Change-Id: I368cfda175cdcbd3a68f46e2332738ec49048e19
Dan Handley
committed
on 6 May 2014
|
Separate out CASSERT macro into own header
...
Separate out the CASSERT macro out of bl_common.h into its own
header to allow more efficient header inclusion.
Change-Id: I291be0b6b8f9879645e839a8f0dd1ec9b3db9639
Dan Handley
committed
on 6 May 2014
|
Remove vpath usage in makefiles
...
Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.
Also reorder source files in makefiles alphabetically.
Fixes ARM-software/tf-issues#121
Change-Id: Id15f60655444bae60e0e2165259efac71a50928b
Dan Handley
committed
on 6 May 2014
|
Make use of user/system includes more consistent
...
Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.
Fixes ARM-software/tf-issues#65
Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33
Dan Handley
committed
on 6 May 2014
|
Move FVP power driver to FVP platform
...
Move the FVP power driver to a directory under the FVP platform
port as this is not a generically usable driver.
Change-Id: Ibc78bd88752eb3e3964336741488349ac345f4f0
Dan Handley
committed
on 6 May 2014
|
Move include and source files to logical locations
...
Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.
Also remove pm.h as it is no longer used.
Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3
Dan Handley
committed
on 6 May 2014
|
2014-05-01 |
Merge pull request #50 from vikramkanigiri/vk/tf-issues#26
...
Preserve PSCI cpu_suspend 'power_state' parameter.
achingupta
committed
on 1 May 2014
|
2014-04-29 |
Preserve PSCI cpu_suspend 'power_state' parameter.
...
This patch saves the 'power_state' parameter prior to suspending
a cpu and invalidates it upon its resumption. The 'affinity level'
and 'state id' fields of this parameter can be read using a set of
public and private apis. Validation of power state parameter is
introduced which checks for SBZ bits are zero.
This change also takes care of flushing the parameter from the cache
to main memory. This ensures that it is available after cpu reset
when the caches and mmu are turned off. The earlier support for
saving only the 'affinity level' field of the 'power_state' parameter
has also been reworked.
Fixes ARM-Software/tf-issues#26
Fixes ARM-Software/tf-issues#130
Change-Id: Ic007ccb5e39bf01e0b67390565d3b4be33f5960a
Vikram Kanigiri
committed
on 29 Apr 2014
|
2014-04-24 |
Merge pull request #33 from hliebel/hl/secure-memory
...
Hl/secure memory
danh-arm
committed
on 24 Apr 2014
|
FVP secure memory support documentation
...
Fixes ARM-software/tf-issues#64
Change-Id: I4e56c25f9dc7f486fbf6fa2f7d8253874119b989
Harry Liebel
committed
on 24 Apr 2014
|
Enable secure memory support for FVPs
...
- Use the TrustZone controller on Base FVP to program DRAM access
permissions. By default no access to DRAM is allowed if
'secure memory' is enabled on the Base FVP.
- The Foundation FVP does not have a TrustZone controller but instead
has fixed access permissions.
- Update FDTs for Linux to use timers at the correct security level.
- Starting the FVPs with 'secure memory' disabled is also supported.
Limitations:
Virtio currently uses a reserved NSAID. This will be corrected in
future FVP releases.
Change-Id: I0b6c003a7b5982267815f62bcf6eb82aa4c50a31
Harry Liebel
committed
on 24 Apr 2014
|
Add TrustZone (TZC-400) driver
...
The TZC-400 performs security checks on transactions to memory or
peripherals. Separate regions can be created in the address space each
with individual security settings.
Limitations:
This driver does not currently support raising an interrupt on access
violation.
Change-Id: Idf8ed64b4d8d218fc9b6f9d75acdb2cd441d2449
Harry Liebel
committed
on 24 Apr 2014
|
2014-04-22 |
Merge pull request #43 from danh-arm/dh/tf-issues#129
...
Move console.c to pl011 specific driver location
danh-arm
committed
on 22 Apr 2014
|
Merge pull request #44 from danh-arm/dh/tf-issues#136
...
Remove redundant code from bl1_plat_helpers.S
danh-arm
committed
on 22 Apr 2014
|
2014-04-16 |
Merge pull request #45 from danh-arm/dh/tf-issues#114
...
Rename FVP "mmap" array to avoid name confusion
danh-arm
committed
on 16 Apr 2014
|
Remove redundant code from bl1_plat_helpers.S
...
Remove redundant code in plat_secondary_cold_boot_setup() in
plat/fvp/aarch64/bl1_plat_helpers.S.
Fixes ARM-software/tf-issues#136
Change-Id: I98c0a46d95cfea33125e34e609c83dc2c97cd86e
Dan Handley
committed
on 16 Apr 2014
|
Merge pull request #40 from athoelke/at/up-stacks-76-v2
...
Allocate single stacks for BL1 and BL2 (v2)
danh-arm
committed
on 16 Apr 2014
|