Merge "Replace dts includes with C preprocessor syntax" into integration

Merge "cert_create: Remove some unused header files inclusions" into integration

Merge "allwinner: Clean up MMU setup" into integration

Merge changes Ib1ed9786,I6c4855c8 into integration ...

* changes:
  plat: imx: Correct the SGIs that used for secure interrupt
  plat: imx8mm: Add the support for opteed spd on imx8mq/imx8mm

Merge "docs: Add upcoming Change Log to Table of Contents" into integration

Merge changes from topic "tegra-downstream-01082020" into integration ...

* changes:
  Tegra194: platform handler for entering CPU standby state
  Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
  Tegra194: memctrl: fix bug in client order id reg value generation
  Tegra194: memctrl: enable mc coalescer
  Tegra194: update scratch registers used to read boot parameters
  Tegra194: implement system shutdown/reset handlers
  Tegra194: mce: support for shutdown and reboot
  Tegra194: request CG7 before checking if SC7 is allowed
  Tegra194: config to enable/disable strict checking mode
  Tegra194: remove unused platform configs
  Tegra194: restore XUSB stream IDs on System Resume

allwinner: Clean up MMU setup ...

Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d

Merge "plat: xilinx: zynqmp: Add checksum support for IPI data" into integration

Merge "zynqmp: pm_service: Add support to query max divisor" into integration

Merge "rpi3/4: Add support for offlining CPUs" into integration

Merge changes from topic "ld/mtd_framework" into integration ...

* changes:
  doc: stm32mp1: Update build command line
  fdts: stm32mp1: remove second QSPI flash instance
  stm32mp1: Add support for SPI-NOR boot device
  stm32mp1: Add support for SPI-NAND boot device
  spi: stm32_qspi: Add QSPI support
  fdts: stm32mp1: update for FMC2 pin muxing
  stm32mp1: Add support for raw NAND boot device
  fmc: stm32_fmc2_nand: Add FMC2 driver support
  stm32mp1: Reduce MAX_XLAT_TABLES to 4
  io: stm32image: fix device_size type
  stm32mp: add DT helper for reg by name
  stm32mp1: add compilation flags for boot devices
  lib: utils_def: add CLAMP macro
  compiler_rt: Import popcountdi2.c and popcountsi2.c files
  Add SPI-NOR framework
  Add SPI-NAND framework
  Add SPI-MEM framework
  Add raw NAND framework

doc: stm32mp1: Update build command line ...

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed

fdts: stm32mp1: remove second QSPI flash instance ...

Remove second flash node as only one must be used
by QSPI NOR driver.

Change-Id: I48189f2fdf4e0455aabe7d4cd9b2f3d36bb9cfb5
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Add support for SPI-NOR boot device ...

STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.

Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Add support for SPI-NAND boot device ...

STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.

Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

spi: stm32_qspi: Add QSPI support ...

Add QSPI support (limited to read interface).
Implements the memory map and indirect modes.
Low level driver based on SPI-MEM operations.

Change-Id: Ied698e6de3c17d977f8b497c81f2e4a0a27c0961
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

fdts: stm32mp1: update for FMC2 pin muxing ...

Include the required FMC2 pinmux definition for the
NAND management.

Change-Id: I80333deacdf3444b2f21f17f2fb5919e569a3591
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Add support for raw NAND boot device ...

STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.

Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

fmc: stm32_fmc2_nand: Add FMC2 driver support ...

Add fmc2_nand driver support. The driver implements
only read interface for NAND devices.

Change-Id: I3cd037e8ff645ce0d217092b96f33ef41cb7a522
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

stm32mp1: Reduce MAX_XLAT_TABLES to 4 ...

For STM32MP1, the address space is 4GB, which can be first divided
in 4 parts of 1GB. This LVL1 table is already mapped regardless
of MAX_XLAT_TABLES.
Fixing typo: Replace Ko to KB.

BL2/sp_min for platform STM32MP1 requires 4 MMU translation tables:
  - a level2 table and a level3 table for identity mapped SYSRAM
  - a level2 table mapping 2MB of BootROM runtime resources
  - a level2 table mapping 2MB of secure DDR (case BL32 is OP-TEE)

Change-Id: If80cbd4fccc7689b39dd540d6649b1313557f326
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

io: stm32image: fix device_size type ...

Device size could be more than 4GB, we must
define size as unsigned long long.

Change-Id: I52055cf5c1c15ff18ab9e157aa9b73c8b4fb7b63
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp: add DT helper for reg by name ...

Add a new entry to find register properties by name and
include new assert functions to limit address cells to 1
and size cells to 1.

Change-Id: Ide59a795a05fb2af36bd07fec15e5a3adf196226
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: add compilation flags for boot devices ...

Adds compilation flags to specify which drivers will be
embedded in the generated firmware.

Change-Id: Ie9decc89c3f26cf17e7148a3a4cf337fd35940f7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

lib: utils_def: add CLAMP macro ...

Add the standard CLAMP macro.  It ensures that
x is between the limits set by low and high.
If low is greater than high the result is undefined.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ia173bb9ca51bc8d9a8ec573bbc15636a94f881f4

compiler_rt: Import popcountdi2.c and popcountsi2.c files ...

Imported from the LLVM compiler_rt library on master branch as of
30 Oct 2018 (SVN revision: r345645).

This is to get the __popcountsi2(si_int a) and __popcountdi2(di_int a)
builtin which are required by a driver that uses a __builtin_popcount().

Change-Id: I8e0d97cebdd90d224690c8ce1b02e657acdddb25
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add SPI-NOR framework ...

SPI-NOR framework is based on SPI-MEM framework using
spi_mem_op execution interface.

It implements read functions and allows NOR configuration
up to quad mode.
Default management is 1 data line but it can be overridden
by platform.
It also includes specific quad mode configuration for
Spansion, Micron and Macronix memories.

Change-Id: If49502b899b4a75f6ebc3190f6bde1013651197f
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Add SPI-NAND framework ...

This framework supports SPI-NAND and is based on the
SPI-MEM framework for SPI operations. It uses a common high
level access using the io_mtd.

It is limited to the read functionalities.

Default behavior is the basic one data line operation
but it could be overridden by platform.

Change-Id: Icb4e0887c4003a826f47c876479dd004a323a32b
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Add SPI-MEM framework ...

This framework supports SPI operations using a common
spi_mem_op structure:
 - command
 - addr
 - dummy
 - data

The framework manages SPI bus configuration:
 - speed
 - bus width (Up to quad mode)
 - chip select

Change-Id: Idc2736c59bfc5ac6e55429eba5d385275ea3fbde
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Add raw NAND framework ...

The raw NAND framework supports SLC NAND devices.

It introduces a new high level interface (io_mtd) that
defines operations a driver can register to the NAND framework.
This interface will fill in the io_mtd device specification:
	- device_size
        - erase_size
that could be used by the io_storage interface.

NAND core source file integrates the standard read loop that
performs NAND device read operations using a skip bad block strategy.
A platform buffer must be defined in case of unaligned
data. This buffer must fit to the maximum device page size
defined by PLATFORM_MTD_MAX_PAGE_SIZE.

The raw_nand.c source file embeds the specific NAND operations
to read data.
The read command is a raw page read without any ECC correction.
This can be overridden by a low level driver.
No generic support for write or erase command or software
ECC correction.

NAND ONFI detection is available and can be enabled using
NAND_ONFI_DETECT=1.
For non-ONFI NAND management, platform can define required
information.

Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Merge changes from topic "ld/mtd_framework" into integration ...

* changes:
  io: change seek offset to signed long long
  compiler_rt: Import aeabi_ldivmode.S file and dependencies