Merge pull request #698 from rockchip-linux/set-APIO-for-rk3399 ...

Set apio for rk3399

GICv3: Allow either G1S or G0 interrupts to be configured ...

Currently the GICv3 driver mandates that platform populate
both G1S and G0 interrupts. However, it is possible that a
given platform is not interested in both the groups and
just needs to specify either one of them.

This patch modifies the `gicv3_rdistif_init()` & `gicv3_distif_init()`
functions to allow either G1S or G0 interrupts to be configured.

Fixes ARM-software/tf-issues#400

Change-Id: I43572b0e08ae30bed5af9334f25d35bf439b0d2b

fiptool: Add support for printing the sha256 digest with info command ...

This feature allows one to quickly verify that the expected
image is contained in the FIP without extracting the image and
running sha256sum(1) on it.

The sha256 digest is only shown when the verbose flag is used.

This change requires libssl-dev to be installed in order to build
Trusted Firmware. Previously, libssl-dev was optionally needed only
to support Trusted Board Boot configurations.

Fixes ARM-Software/tf-issues#124

Change-Id: Ifb1408d17f483d482bb270a589ee74add25ec5a6

Support for Mediatek MT6795 SoC ...

This patch support single core to boot to Linux kernel
through Trusted Firmware.
It also support 32 bit kernel and 64 bit kernel booting.

Merge pull request #699 from soby-mathew/sm/flush_plat_psci_ops ...

Flush `psci_plat_pm_ops` after initialization

rockchip: fixes some typo ...

As the checkpatch reports the warning or error.

plat/rockchip/common/plat_pm.c:96:
ERROR: do not set execute permissions for source files
plat/rockchip/rk3399/drivers/pmu/pmu.c:294:
ERROR: do not set execute permissions for source files

plat/rockchip/common/plat_pm.c:286: WARNING: line over 80 characters
plat/rockchip/common/plat_pm.c:287: WARNING: line over 80 characters

Change-Id: Ib347da21c56551c31df3f90f03777b13c75d5c26

rockchip: SIP call use 32 bit return value for rk3399 ...

for compatible 32bit and 64bit, we use 0x82xxxxxx as function ID,
we modify SIP call function return value to 32 bit.

Change-Id: Ib99b03a9ea423853aaa296dcc634ee82c622a552

rockchip: set gpio2 ~ gpio4 to input and pull none mode ...

For save power cosumption, if gpio power supply shut down, we need to
set gpio2 ~ gpio4 to input and HiZ status when suspend, and recovery
they status when rusume. we do it base on apio pass from loader.

Change-Id: I59fd2395e5e37e63425472a39f519822c9197e4c

rockchip: support disable/enable specific gpio when suspend/resume ...

some specific board need to disable/enable specific gpio when
suspend/resume, so we add this function, bootloader can pass the
specific gpio, and we can handle these gpios in bl31 suspend/resuem
function.

Change-Id: I373b03ef9202ee4a05a2b9caacdfa01b47ee2177

rockchip/rk3399: improve gpio driver and support get pull mode function ...

We may need gpio pull mode later, so add this function.
Besides fix a set pull mode bug, and save gpio clock gate,
when operate the gpio, we will enable gpio clock, when
finish gpio operate, restore gpio clock gate status.

Change-Id: Ia1d602804f571a17f5ddc499908663b968b02974

Flush `psci_plat_pm_ops` after initialization ...

The `psci_plat_pm_ops` global pointer is initialized during cold boot by the
primary CPU and will be accessed by the secondary CPUs before enabling data
cache during warm boot. This patch adds a missing data cache flush of
`psci_plat_psci_ops` after initialization during psci_setup() so that
secondaries can see the updated `psci_plat_psci_ops` pointer.

Fixes ARM-software/tf-issues#424

Change-Id: Id4554800b5646302b944115a33be69507d53cedb

Merge pull request #697 from rockchip-linux/fixes-scu-idle ...

rockchip: fix the scu idle for rk3399

rockchip: fix the scu idle for rk3399 ...

As rk3399 reported the d8/octane scores drop 10% with cpu idle.
The root cause is thc cpu cluster enter the slow mode.
We don't need switch the clock to 24MHz if cpu cluster enter the
retention mode. In order to improve performance, it just needs for
cluster enter powering off mode.

Also, we shouldn't do anything for hlvl if the system is off.

Change-Id: I2a02962a01343abd0cba47ed63192c1cdf88b119

Merge pull request #695 from soby-mathew/sm/AArch32_fixes ...

Fixes for AArch32 port of TF

AArch32: Fix SCTLR context initialization ...

This patch fixes a bug in context management library when writing
SCTLR register during context initialization. The write happened
prior to initialization of the register context pointer. This
resulted in the compiler optimizing the write sequence from the
final binary and hence SCTLR remains uninitialized when
entering normal world. The bug is fixed by doing the
initialization of the register context pointer earlier in the
sequence.

Change-Id: Ic7465593a74534046b79f40446ffa1165c52ed76

AArch32: resolve build error when LOG_LEVEL=50 ...

This patch resolves a build error in Trusted Firmware when `ARCH=aarch32`
and LOG_LEVEL >= 50.

Change-Id: I62a23ded4a25304533cdcc5ff11442aee041709b

Merge pull request #689 from yatharth-arm/yk/plat_report_expn ...

Remove looping around `plat_report_exception`

Merge pull request #690 from soby-mathew/sm/level_sel_xlat ...

Automatically select initial xlation lookup level

Merge pull request #693 from dp-arm/pmf-asm ...

Move pmf headers to include/lib/pmf and add assembler helper

Merge pull request #692 from dp-arm/master ...

fiptool: Fix typo in create and update usage functions

Merge pull request #691 from rockchip-linux/fixes-suspend/resume-bugs ...

Fixes suspend/resume bugs

Add assembler helper to calculate PMF timestamp offset ...

Given the service name and timestamp id, this assembler macro
calculates the offset into a memory region where the per-cpu timestamp
value is located.

Change-Id: I47f6dfa2a17be182675e2ca0489d6eed42433209

Move pmf headers to include/lib/pmf ...

More headers will be needed soon so better to move these to their own
directory to avoid cluttering include/lib.

Change-Id: I6a72dc5b602d6f51954cf60aadd1beb52a268670

Merge pull request #684 from rockchip-linux/add-sdram-for-rk3399 ...

rockchip: add dram driver for rk3399

fiptool: Fix typo in create and update usage functions ...

It should be 'fiptool' instead of 'fiptfool'.

Change-Id: I84ce1b6aaae5b8b33e5781bfe4f9e9cf462edb03

rockchip: handle some interrupt before enter power mode for rk3399 ...

For the PMU design, we don't expect to get the interrupts before enter
the power mode. Since that will cause the confusion for the state
machine in the power mode.

Change-Id: Id8dee79ae617a66271b5caf92caf35f520f45099

rockchip: remove the unused code for rk3399 ...

Change-Id: I986d64df9dc62354d50ccea0468b90f090a44160
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

rockchip: on rk3399 enable Schmitt trigger on 32 kHz clock ...

If we don't enable the Schmitt trigger on the 32 kHz clock then systems
won't always resume from suspend properly.  Presumably anything else in
the system that relies on the 32 kHz clock also will have problems
without the Schmitt trigger enabled.

Enable it always since having the 32 kHz clock on GPIO0_A0 isn't
exactly an optional feature, so all boards using rk3399 will need this.

Change-Id: Idc18c6cd1adc5be5f60efd9cb805d83d5cd40129

rockchip: enable or disable auto power down base on frequency ...

add auto_pd_dis_freq parameter, we can pass a frequency from kernel
to disable or enable ddr auto power down function.

Change-Id: Ie30914701336c59047c380381c6b75dd76a89562

rockchip: rk3399: add dram driver ...

add dram driver, and kernel can through sip function talk to bl31 to
do ddr frequency scaling. and ddr auto powerdown.

Change-Id: I0d0f2869aed95e336c6e23ba96a9310985c84840