doc: Add more missing platforms ...

Add meson-g12a, qemu-sbsa and rpi4 to the documentation index so
that they will have their docs rendered and integrated into the
table of contents.

Change-Id: Id972bf2fee67312dd7bff29f92bea67842e62431
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Merge "Neoverse N1 Errata Workaround 1542419" into integration

Merge "Fix the CAS spinlock implementation" into integration

Neoverse N1 Errata Workaround 1542419 ...

Coherent I-cache is causing a prefetch violation where when the core
executes an instruction that has recently been modified, the core might
fetch a stale instruction which violates the ordering of instruction
fetches.

The workaround includes an instruction sequence to implementation
defined registers to trap all EL0 IC IVAU instructions to EL3 and a trap
handler to execute a TLB inner-shareable invalidation to an arbitrary
address followed by a DSB.

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ic3b7cbb11cf2eaf9005523ef5578a372593ae4d6

Fix the CAS spinlock implementation ...

Make the spinlock implementation use ARMv8.1-LSE CAS instruction based
on a platform build option. The CAS-based implementation used to be
unconditionally selected for all ARM8.1+ platforms.

The previous CAS spinlock implementation had a bug wherein the spin_unlock()
implementation had an `sev` after `stlr` which is not sufficient. A dsb is
needed to ensure that the stlr completes prior to the sev. Having a dsb is
heavyweight and a better solution would be to use load exclusive semantics
to monitor the lock and wake up from wfe when a store happens to the lock.
The patch implements the same.

Change-Id: I5283ce4a889376e4cc01d1b9d09afa8229a2e522
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>

Merge changes from topic "qemu_sbsa" into integration ...

* changes:
  qemu/qemu_sbsa: Adding memory mapping for both FLASH0/FLASH1
  qemu/qemu_sbsa: Adding Qemu SBSA platform

doc: Fix GCC version to 8.3-2019.03 ...

Change-Id: I3b866e927d93f4b690aa4891940fc8afabf4146e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Merge "doc: Migrate to Linaro release 19.06" into integration

qemu/qemu_sbsa: Adding Qemu SBSA platform ...

This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.

Fixes ARM-software/tf-issues#602

Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c

doc: Migrate to Linaro release 19.06 ...

- Updated Linaro release version number to 19.06
- Updated links to Linaro instructions and releases
- Removed the Linaro old releases link

Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: Ib786728106961e89182b42183e7b889f6fc74190

Merge "doc: Fix platform port inclusion" into integration

Merge changes from topic "amlogic-g12a" into integration ...

* changes:
  amlogic: g12a: Add support for the S905X2 (G12A) platform
  amlogic: makefile: Use PLAT variable when possible
  amlogic: sha_dma: Move register mappings to platform header

Merge changes from topic "raspberry-pi-4-support" into integration ...

* changes:
  rpi4: Add initial documentation file
  rpi4: Add stdout-path to device tree
  rpi4: Add GIC maintenance interrupt to GIC DT node
  rpi4: Cleanup memory regions, move pens to first page
  rpi4: Reserve resident BL31 region from non-secure world
  rpi4: Amend DTB to advertise PSCI
  rpi4: Determine BL33 entry point at runtime
  rpi4: Accommodate "armstub8.bin" header at the beginning of BL31 image
  Add basic support for Raspberry Pi 4
  rpi3: Allow runtime determination of UART base clock rate
  FDT helper functions: Respect architecture in PSCI function IDs
  FDT helper functions: Add function documentation

Merge changes from topic "mp/giv3-discovery" into integration ...

* changes:
  Migrate ARM platforms to use the new GICv3 API
  Adding new optional PSCI hook pwr_domain_on_finish_late
  GICv3: Enable multi socket GIC redistributor frame discovery

Merge changes I0283fc2e,Ib476d024,Iada05f7c into integration ...

* changes:
  hikey: fix to load FIP by partition table.
  hikey960: fix to load FIP by partition table
  drivers: partition: support different block size

amlogic: g12a: Add support for the S905X2 (G12A) platform ...

Introduce the preliminary support for the Amlogic S905X2 (G12A) SoC.

This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux. Tested on a SEI510 board.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ife958f10e815a4530292c45446adb71239f3367f

Adding new optional PSCI hook pwr_domain_on_finish_late ...

This PSCI hook is similar to pwr_domain_on_finish but is
guaranteed to be invoked with the respective core and cluster are
participating in coherency. This will be necessary to safely invoke
the new GICv3 API which modifies shared GIC data structures concurrently.

Change-Id: I8e54f05c9d4ef5712184c9c18ba45ac97a29eb7a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

doc: Fix platform port inclusion ...

This patch:

- Adds any leftover platform ports that were not having their
  documentation built (not in the index.rst table of contents)
- Corrects a handful of RST formatting errors that cause poor
  rendering
- Reorders the list of platforms so that they are displayed
  in alphabetical order

Change-Id: If8c135a822d581c3c5c4fca2936d501ccfd2e94c
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

rpi4: Add initial documentation file ...

As the Raspberry Pi4 port is now in a usable state, add the build
instructions together with some background information to the
documentation directory.
The port differs quite a bit from the Raspberry Pi 3, so we use a
separate file for that.

Change-Id: I7d9f5967fdf3ec3bfe97d78141f59cbcf03388d4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

doc: Render Marvell platform documents ...

The documentation for Marvell platforms was not included in the
rendered document output until now because, while it was mostly
valid RST format, the files were saved with a .txt extension.

This patch corrects some RST formatting errors, creates a document
tree (index page) for the Marvell documents, and adds the Marvell
subtree to the main index.

Change-Id: Id7d4ac37eded636f8f62322a153e1e5f652ff51a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

drivers: partition: support different block size ...

The block size of some storage device is 4096-byte long, such as UFS. But
PARTITION_BLOCK_SIZE is defined as 512-byte long. So replace it by
PLAT_PARTITION_BLOCK_SIZE. Make it configurable in platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Iada05f7c646d0a0f2c0d3b8545540b3cb7153de3

Merge "Refactor ARMv8.3 Pointer Authentication support code" into integration

Refactor ARMv8.3 Pointer Authentication support code ...

This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
  of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
  which returns 128-bit value and uses Generic timer physical counter
  value to increase the randomness of the generated key.
  The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
  generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
  pauth_disable_el1()` and `pauth_disable_el3()` functions disable
  PAuth for EL1 and EL3 respectively;
  `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
  cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
  `save_gp_registers()` and `pauth_context_save()`;
  `restore_gp_pauth_registers()` replaces `pauth_context_restore()`
  and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
  code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
  for 12 uint64_t PAuth registers instead of 10 by removal of macro
  CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
  and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
  in `msr	spsel`  instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.

Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Merge changes from topic "jc/rsa-pkcs" into integration ...

* changes:
  Remove RSA PKCS#1 v1.5 support from cert_tool
  Add documentation for new KEY_SIZE option
  Add cert_create tool support for RSA key sizes
  Support larger RSA key sizes when using MBEDTLS

Remove RSA PKCS#1 v1.5 support from cert_tool ...

Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.

Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.

Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

Add documentation for new KEY_SIZE option ...

This patch adds documentation for the new KEY_SIZE build option that is
exposed by cert_create, and instructions on how to use it.

Change-Id: I09b9b052bfdeeaca837e0f0026e2b01144f2472c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

Invalidate dcache build option for bl2 entry at EL3 ...

Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06

Merge "doc: Updated user guide with new Mbed TLS version number" into integration

Merge changes from topic "jc/mte_enable" into integration ...

* changes:
  Add documentation for CTX_INCLUDE_MTE_REGS
  Enable MTE support in both secure and non-secure worlds

Merge "Add UBSAN support and handlers" into integration