/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* Authors:
* Aneesh V <aneesh@ti.com>
*
* Derived from OMAP3 work by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _OMAP4_H_
#define _OMAP4_H_
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
/*
* L4 Peripherals - L4 Wakeup and L4 Core now
*/
#define OMAP44XX_L4_CORE_BASE 0x4A000000
#define OMAP44XX_WAKEUP_L4_IO_BASE 0x4A300000
#define OMAP44XX_L4_WKUP_BASE 0x4A300000
#define OMAP44XX_L4_PER_BASE 0x48000000
#define OMAP44XX_SRAM_BASE 0x40300000
#define OMAP44XX_SRAM_SCRATCH_SPACE 0x4030c000 /* start of public stack */
/* EMIF and DMM registers */
#define OMAP44XX_EMIF1_BASE 0x4c000000
#define OMAP44XX_EMIF2_BASE 0x4d000000
#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
/* CONTROL */
#define OMAP44XX_CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
#define OMAP44XX_CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
#define OMAP44XX_CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
/* PRM */
#define OMAP44XX_PRM_VC_VAL_BYPASS (OMAP44XX_WAKEUP_L4_IO_BASE + 0x7ba0)
#define OMAP44XX_PRM_VC_CFG_I2C_MODE (OMAP44XX_WAKEUP_L4_IO_BASE + 0x7ba8)
#define OMAP44XX_PRM_VC_CFG_I2C_CLK (OMAP44XX_WAKEUP_L4_IO_BASE + 0x7bac)
#define OMAP44XX_PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
#define OMAP44XX_PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
#define OMAP44XX_PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
#define OMAP44XX_PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
#define OMAP44XX_PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
#define OMAP44XX_PRM_VC_VAL_BYPASS_DATA_SHIFT 16
#define OMAP44XX_PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
/* IRQ */
#define OMAP44XX_PRM_IRQSTATUS_MPU_A9 (OMAP44XX_WAKEUP_L4_IO_BASE + 0x6010)
/* UART */
#define OMAP44XX_UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
#define OMAP44XX_UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
#define OMAP44XX_UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000)
/* I2C */
#define OMAP44XX_I2C1_BASE (OMAP44XX_L4_PER_BASE + 0x070000)
#define OMAP44XX_I2C2_BASE (OMAP44XX_L4_PER_BASE + 0x072000)
#define OMAP44XX_I2C3_BASE (OMAP44XX_L4_PER_BASE + 0x060000)
#define OMAP44XX_I2C4_BASE (OMAP44XX_L4_PER_BASE + 0x350000)
/* General Purpose Timers */
#define OMAP44XX_GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000)
#define OMAP44XX_GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000)
#define OMAP44XX_GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000)
/* Watchdog Timer2 - MPU watchdog */
#define OMAP44XX_WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
#define OMAP44XX_SCRM_BASE 0x4a30a000
#define OMAP44XX_SCRM_ALTCLKSRC (OMAP44XX_SCRM_BASE + 0x110)
#define OMAP44XX_SCRM_AUXCLK1 (OMAP44XX_SCRM_BASE + 0x314)
#define OMAP44XX_SCRM_AUXCLK3 (OMAP44XX_SCRM_BASE + 0x31c)
/* 32KTIMER */
#define OMAP44XX_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
/* MMC */
#define OMAP44XX_MMC1_BASE (OMAP44XX_L4_PER_BASE + 0x09C000)
#define OMAP44XX_MMC2_BASE (OMAP44XX_L4_PER_BASE + 0x0B4000)
#define OMAP44XX_MMC3_BASE (OMAP44XX_L4_PER_BASE + 0x0AD000)
#define OMAP44XX_MMC4_BASE (OMAP44XX_L4_PER_BASE + 0x0D1000)
#define OMAP44XX_MMC5_BASE (OMAP44XX_L4_PER_BASE + 0x0D5000)
/* GPIO
*
* Note that, while the GPIO controller is the same as on an OMAP3,
* the base address has an additional offset of 0x100, which you can
* see being added here so that the OMAP_GPIO_* macros you see in
* mach-omap/gpio.c don't need to be adjusted based on the platform.
*/
#define OMAP44XX_GPIO1_BASE (OMAP44XX_L4_WKUP_BASE + 0x10100)
#define OMAP44XX_GPIO2_BASE (OMAP44XX_L4_PER_BASE + 0x55100)
#define OMAP44XX_GPIO3_BASE (OMAP44XX_L4_PER_BASE + 0x57100)
#define OMAP44XX_GPIO4_BASE (OMAP44XX_L4_PER_BASE + 0x59100)
#define OMAP44XX_GPIO5_BASE (OMAP44XX_L4_PER_BASE + 0x5B100)
#define OMAP44XX_GPIO6_BASE (OMAP44XX_L4_PER_BASE + 0x5D100)
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
/* EHCI */
#define OMAP44XX_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
/* DMM */
#define OMAP44XX_DMM_BASE 0x4E000000
#define DMM_LISA_MAP_BASE (OMAP44XX_DMM_BASE + 0x40)
#define DMM_LISA_MAP_SYS_SIZE_MASK (7 << 20)
#define DMM_LISA_MAP_SYS_SIZE_SHIFT 20
#define DMM_LISA_MAP_SYS_ADDR_MASK (0xFF << 24)
/* Memory Adapter (4460 onwards) */
#define OMAP44XX_MA_BASE 0x482AF000
/*
* Hardware Register Details
*/
/* Watchdog Timer */
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
/* GP Timer */
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
/*
* PRCM
*/
/* PRM */
#define OMAP44XX_PRM_BASE 0x4A306000
#define OMAP44XX_PRM_DEVICE_BASE (OMAP44XX_PRM_BASE + 0x1B00)
#define OMAP44XX_PRM_RSTCTRL OMAP44XX_PRM_DEVICE_BASE
#define OMAP44XX_PRM_RSTCTRL_RESET 0x01
/*
* SAR (Save & Rescue) memory region
*/
#define OMAP44XX_SAR_RAM_BASE 0x4a326000
#define OMAP44XX_SAR_CH_ADDRESS (OMAP44XX_SAR_RAM_BASE + 0xA00)
#define OMAP44XX_SAR_CH_START (OMAP44XX_SAR_RAM_BASE + 0xA0C)
#define OMAP44XX_SAR_BOOT_VOID 0x00
#define OMAP44XX_SAR_BOOT_XIP 0x01
#define OMAP44XX_SAR_BOOT_XIPWAIT 0x02
#define OMAP44XX_SAR_BOOT_NAND 0x03
#define OMAP44XX_SAR_BOOT_ONENAND 0x04
#define OMAP44XX_SAR_BOOT_MMC1 0x05
#define OMAP44XX_SAR_BOOT_MMC2_1 0x06
#define OMAP44XX_SAR_BOOT_MMC2_2 0x07
#define OMAP44XX_SAR_BOOT_UART 0x43
#define OMAP44XX_SAR_BOOT_USB_1 0x45
#define OMAP44XX_SAR_BOOT_USB_ULPI 0x46
#define OMAP44XX_SAR_BOOT_USB_2 0x47
/*
* Non-secure SRAM Addresses
* Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
* at 0x40304000(EMU base) so that our code works for both EMU and GP
*/
#define NON_SECURE_SRAM_START 0x40304000
#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4030D000
/*
* OMAP4 real hardware:
* TODO: Change this to the IDCODE in the hw regsiter
*/
#define CPU_OMAP4430_ES10 1
#define CPU_OMAP4430_ES20 2
#define CM_DLL_CTRL 0x4a004110
#define CM_MEMIF_EMIF_1_CLKCTRL 0x4a008b30
#define CM_MEMIF_EMIF_2_CLKCTRL 0x4a008b38
/* Silicon revisions */
#define OMAP4430_SILICON_ID_INVALID 0
#define OMAP4430_ES1_0 1
#define OMAP4430_ES2_0 2
#define OMAP4430_ES2_1 3
#define OMAP4430_ES2_2 4
#define OMAP4430_ES2_3 5
#define OMAP4460_ES1_0 6
#define OMAP4460_ES1_1 7
#ifndef __ASSEMBLY__
struct ddr_regs {
u32 tim1;
u32 tim2;
u32 tim3;
u32 phy_ctrl_1;
u32 ref_ctrl;
u32 config_init;
u32 config_final;
u32 zq_config;
u8 mr1;
u8 mr2;
};
struct dpll_param;
void omap4_ddr_init(const struct ddr_regs *, const struct dpll_param *);
void omap4_power_i2c_send(u32);
unsigned int omap4_revision(void);
int omap4430_scale_vcores(void);
int omap4460_scale_vcores(unsigned vsel0_pin, unsigned volt_mv);
void omap4_set_warmboot_order(u32 *device_list);
#endif
#endif
