commands: include missing header ...

When compiled for ARCH=sandbox, we get a compiler warning
if we don't include the needed header file as well.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: Fix boot -m ...

We have to continue when bootentries_collect succeeds, not when it fails.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: gpio_direction_output: add missed VALUE parameter to help message ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mii-tool: Fix gigabit advertise / link partner ability mixup ...

bmcr2 contains the gigabit advertise bits and lpa2 contains the gigabit
link partner ability bits, not the other way round.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mii-tool: Fix gigabit link test ...

media_list tests for gigabit phys like this:

if (mask & BMCR_SPEED1000)

mask does not contain the value of the BMCR register though, so the
test is completely bogus. Test for mask2 instead which is only
nonzero when the phy has gigabit capabilities.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mii-tool: Fix string length ...

media_list writes into a static string. Worst case length of this string
is 125 bytes, but the function only allocates 100 bytes. Use 256 bytes which
is long enough for some extensions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/warnings'

2048: Reset score on startup ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: drvinfo: Make locally used function static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc' ...

Conflicts:
	commands/devinfo.c

devinfo: reduce indentation ...

This patch reduces the indentation of "devinfo", to reduce the amount of
overly long lines.

And while we're at it, also remove the fixed-size of the human-readable
area. As entries didn't align anyway (because of indentation), this was
just eating more space without giving much more readability.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: beautify output ...

* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

misc: upper-case some abbreviations ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devinfo: make the output of "devinfo DEVICE" nicer ...

* some output sections started with "foo: bar", some with "foo = bar". Unify this.
* there was a fixed size to the "foo =" parameters, which wasn't fitting, this
  was especially visible at "devinfo global"
* don't output "resources:", "driver:" and "bus:" lines if there are none
  resources, drivers or busses involved.
* remove some empty lines
* harmonize differentiation between headlines (e.g. "resources:") and values
  by indenting values slightly
* uppercase some texts

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drvlist: factor the driver list out of 'devinfo' ...

The command 'devinfo' was first spitting out all devices, and then
also all drivers. This patch separates them into two commands,
'devinfo' as before, and also the new command 'drvinfo'

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

oftree command: make devicetree file optargs to -l/-s ...

When loading or saving a devicetree it seems logical to add the
filename to the option specifying the command. This is also slightly
easier to parse.
While at it add missing documentation for the -s option.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Drop devicetree merge support ...

I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:

unflatten: too many end nodes

Remove this feature to save the complexity.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

oftree: remove dump support ...

This can now be done with the of_dump command.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add of_dump command ...

The oftree command is overloaded. This adds a dedicated command
which only dumps devicetrees to the console so that the corresponding
functionality in the oftree command can be removed in the next step.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devinfo: add human readable size after memory range ...

It's not always easy to know what is the size of a parition.

This patch adds the size of a memory range in human readable
format. We now have for example:

`---- cfi_flash0
     `---- nor0
          `---- 0x00000000-0x00ffffff (    16 MiB): /dev/nor0
          `---- 0x00000000-0x0001ffff (   128 KiB): /dev/env0
          `---- 0x00020000-0x0011ffff (     1 MiB): /dev/fpga0
          `---- 0x00120000-0x0019ffff (   512 KiB): /dev/self0
          `---- 0x001a0000-0x00d9ffff (    12 MiB): /dev/linux
          `---- 0x00da0000-0x00ffffff (   2.4 MiB): /dev/elf

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

complete: Add devicetree completion ...

The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

magicvars: can now also list values ...

Also uppercased the abbreviation GPIO in printf.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CONFIG_LONGHELP to commands/Kconfig ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CMD_IFUP to commands/Kconfig ...

* this places the command into the "Network commands"
  section of Kconfig
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_DHCP -> CMD_DHCP ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: NET_PING -> CMD_PING ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: introduce CMD_HOST ...

... because NET_RESOLV can be used alone to turn on the functionality
of resolv().

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: let all network commands depend on NET ...

... by using an "if NET" ... "endif" clause.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: HUSH_GETOPT -> CMD_GETOPT ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>