SFDP: unit tests: Fix Configuration ID in fake test data ...

The second byte of the sector map descriptor is the configuration ID.
On a device with non-configurable layout, the only available map
descriptor's configuration ID must be 0x00 as required by the
JESD216D standard. This value is important, because we will check
each descriptor's configuration ID when we support multiple
configurations.

Note: The test data is fake - when we modified real data of a
configurable device to become non-configurable for test purpose, we
forgot to change this field.

SFDP: unit tests: Move unshared test data into case ...

Some test data in test_sfdp.cpp is used by one test case only, so
we turn it into a local variable.

SFDP: Add more parameters to the reader callback ...

The SFDP functions parse SFDP data which is fetched by a callback
called `sfdp_reader` provided by {SPIF,QSPIF,OSPIF}BlockDevice.
Currently, this callback interface only takes a read address and an RX
buffer to store output data. This has been enough, because other SPI
parameters are always the same when fetching the SFDP table only -
they are just hardcoded in each reader.

But in the future we will add support for flash devices with multiple
configurations (in a subsequent commit), and to detect which
configuration is enabled, we will need to send detection commands
which require device-dependent SPI parameters:
* address size
* instruction
* dummy cycles

This commit
* turns the above SPI parameters from predefined/hardcoded values
into parameters of the callback
* lets the SFDP functions pass the above parameters to the callback
(Note: To read the SFDP table itself, those values are constants
defined by the standard, not tied to any particular device, so they
can be known to the SFDP functions)
* updates the callbacks implemented by {SPIF,QSPIF,OSPIF}BlockDevice
* updates the mock callback for unit tests and expectations

SFDP: Fix sector map table allocation check ...

When passing an allocation size directly to `std::make_unique`,
`std::nothrow` is unavailable, so any failed allocation results in
an exception which we cannot catch because Mbed OS is compiled with
`-fno-exceptions`. To fix this, chain `std::make_unique` with
`new (std::nothrow)`, and the allocated `unique_ptr` retains the
`nullptr` property.

drivers: Add missing OSPI.cpp to CMakeLists.txt

Merge pull request #15031 from jeromecoutant/PR_WIFI_TEST ...

connectivity-netsocket-tests-tests-network-wifi test suite configuration simplification

connectivity-netsocket-tests-tests-network-wifi update2 ...

- add minor print to make debug easier
- remove not useful part

connectivity-netsocket-tests-tests-network-wifi update ...

Use default NSAPI configuration

Merge pull request #15040 from mat-kalinowski/sendrecv_message ...

New feature: send/recv message implementation added to network stack

Merge pull request #15010 from world-direct/feature/reduceTLSspam ...

Reduce spam on trace because of calling read/write while handshaking

Merge pull request #15029 from OpenNuvoton/nuvoton_m2354_tfm_import_mcu_partition ...

M2354: Fix incorrectly resolved peripheral base with security

Merge pull request #15060 from saheerb/master ...

set locale in mbed-os-env Docker image

Merge pull request #15059 from LDong-Arm/bd_greentea_fixes ...

Fix Thread::start() and general_block_device test's thread allocation/deallocation

Moving alignment information in the nsapi_msghdr_t ...

Macro MBED_ALIGN expands in C to _Alignas which can't be used in the
type declaration. This patch moves it to the first type definition
which makes this code compile properly in CPP and C.

Merge pull request #15027 from OpenNuvoton/nuvoton_m2354_tfm_fw_version ...

M2354: Generate unique MCUboot image version

Merge pull request #15028 from jeromecoutant/PR_SPI_V2 ...

STM32 SPI: Update and improvement

General block device test: Fix thread stack allocation ...

The test case for multithreaded erase/program/read allocates a few
Thread objects from the heap and starts them. It has a few problems:

* To check that there will be enough heap to start a new thread, the
test case tries to allocate a dummy buffer of the thread's heap size
and then frees it, before starting the thread. Then the thread will
allocate its own stack. Such check is not reliable, because threads
that are already running also perform additional allocation (when
running `test_thread_job()`) and may take away the memory we just
checked.
* When deleting all threads in a loop, the loop boundary misses the
last thread if the last thread object was allocated but not started
(i.e. due to failed thread stack allocation check).

To fix the issues
* Start a thread without any allocation test. Following the preceding
commit "rtos: Thread: Make stack allocation failure runtime catchable",
`Thread::start()` now returns `osErrorNoMemory` if stack allocation
fails which we can handle.
* Store pointers to all threads in a zero-initialized array, and
free all elements at the end of the test.

rtos: Thread: Make stack allocation failure runtime catchable ...

When a Thread object's stack memory is not provided, its `start()`
member function dynamically allocates its stack from the heap. If
allocation fails, there is no way to catch it because
* `std::nothrow` is missing after the `new` keyword. As Mbed OS
is built with `-fno-exceptions` (C++ exceptions disabled), failed
allocation results in an unrecoverable fault.
* The attempted `nullptr` check, which doesn't work anyway due to
the first point, is an assertion instead of error returning.
Assertions should be used as a development tool to ensure code
behaves correctly. But out-of-memory is a completely valid runtime
situation.

This commit adds the missing `std::nothrow`, and makes `Thread::start()`
return `osErrorNoMemory` if allocation fails so the caller can handle
it.

Note: A case when a thread should never fail due to lack of memory
is the main thread. But the main thread's stack is a pre-allocated
array in the static memory, passed to the `Thread()` constructor
during thread creation, so it's not impacted by this change.

set locale in mbed-os-env docker image

Removing FIXME comment and adding empty line in the test file

STM32 SPI : Pull Down for output line

STM32 SPI : Add SPI reset in init

STM32 SPI : STM32H7 IP is SPI_IP_VERSION_V2

Merge pull request #15007 from Patater/upgrade-toolchains ...

docker: Upgrade GCC to 10.3-2021.07

Merge pull request #15052 from saheerb/master ...

Fix mbed-os-env docker digest retrieval

Fixing documentation errors ...

Minor errors in the documentation were fixed. These caused failure
of the doxygen checks in the PR.

Adding documentation and minor code changes ...

Doxygen documentation for MsgHeaderIterator was added. Type used
for alignment of the nsapi_msghdr_t struct was changed.

Tag docker images generated by master branch as latest.

Fix mbed-os-env docker digest retrieval ...

Adapt changes in skopeo command line to inspect docker image.
Use tagged skopeo docker image to avoid breakage in future.

Merge pull request #15045 from LDong-Arm/malloc_newlib_nano ...

Workaround for a bug in malloc() from newlib-nano 4.1.0 (in GCC 10.3)