GitBucket
|
Specify address of UART device to use as a console
This patch adds the ability to specify the base address of a UART device for initialising the console. This allows a boot loader stage to use a different UART device from UART0 (default) for the console. Change-Id: Ie60b927389ae26085cfc90d22a564ff83ba62955
WIP_v2.3-LS
master
v2.2-LS
v2.4-LS
v2.3-rc2
v2.3-rc1
v2.3-rc0
v2.3
v2.2-rc2
v2.2-rc1
v2.2-rc0
v2.2
v2.1-rc1
v2.1-rc0
v2.1
v2.0-rc0
v2.0
v1.6-rc1
v1.6-rc0
v1.6
v1.5-rc3
v1.5-rc2
v1.5-rc1
v1.5-rc0
v1.5
v1.4-rc0
v1.4
v1.3_rc2
v1.3_rc1
v1.3-rc0
v1.3
v1.2-rc0
v1.2
v1.1-rc3
v1.1-rc2
v1.1-rc1
v1.1-rc0
v1.1-Juno-0.1
v1.1
v1.0-rc0
v1.0
v0.4-rc2
v0.4-rc1
v0.4-Juno-0.6-rc1
v0.4-Juno-0.6-rc0
v0.4-Juno-0.5-rc1
v0.4-Juno-0.5-rc0
v0.4-Juno-0.5
v0.4-Juno-0.4-rc0
v0.4-Juno-0.4
v0.4
v0.3-Juno-0.3
v0.3-Juno-0.2
v0.3-Juno
v0.3
for-v0.4/05.22
for-v0.4/05.21
for-v0.4/05.20
for-v0.4-rc0
|
|---|
|
Dan Handley
committed
on 20 Feb 2014
|
| drivers/arm/peripherals/pl011/console.h |
|---|
| drivers/arm/peripherals/pl011/pl011.c |
|---|
| plat/fvp/bl1_plat_setup.c |
|---|
| plat/fvp/platform.h |
|---|