2015-10-20 |
Add optional bl1_plat_prepare_exit() API
...
This patch adds an optional API to the platform port:
void bl1_plat_prepare_exit(void);
This function is called prior to exiting BL1 in response to the
RUN_IMAGE_SMC request raised by BL2. It should be used to perform
platform specific clean up or bookkeeping operations before
transferring control to the next image.
A weak empty definition of this function has been provided to
preserve platform backwards compatibility.
Change-Id: Iec09697de5c449ae84601403795cdb6aca166ba1
Juan Castillo
authored
on 5 Oct 2015
Juan Castillo
committed
on 20 Oct 2015
|
2015-10-19 |
Break down BL1 AArch64 synchronous exception handler
...
The AArch64 synchronous exception vector code in BL1 is almost
reaching its architectural limit of 32 instructions. This means
there is very little space for this code to grow.
This patch reduces the size of the exception vector code by
moving most of its code in a function to which we branch from
SynchronousExceptionA64.
Change-Id: Ib35351767a685fb2c2398029d32e54026194f7ed
Sandrine Bailleux
committed
on 19 Oct 2015
|
2015-10-14 |
Merge pull request #405 from vwadekar/tlkd-resume-fid-v3
...
TLKD: pass results with TLK_RESUME_FID function ID
danh-arm
committed
on 14 Oct 2015
|
Merge pull request #406 from sandrine-bailleux/sb/cci-init-fix-assertion
...
Fix debug assertion in deprecated CCI-400 driver
danh-arm
committed
on 14 Oct 2015
|
2015-10-12 |
Fix debug assertion in deprecated CCI-400 driver
...
This patch fixes a copy and paste issue that resulted in the cluster
indexes not being checked as intended. Note that this fix applies to
the deprecated CCI-400 driver, not the unified one.
Change-Id: I497132a91c236690e5eaff908f2db5c8c65e85ab
Sandrine Bailleux
committed
on 12 Oct 2015
|
2015-10-09 |
TLKD: pass results with TLK_RESUME_FID function ID
...
TLK sends the "preempted" event to the NS world along with an
identifier for certain use cases. The NS world driver is then
expected to take appropriate action depending on the identifier
value. Upon completion, the NS world driver then sends the
results to TLK (via x1-x3) with the TLK_RESUME_FID function ID.
This patch uses the already present code to pass the results
from the NS world to TLK for the TLK_RESUME_FID function ID.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Varun Wadekar
committed
on 9 Oct 2015
|
2015-10-07 |
Merge pull request #402 from soby-mathew/sm/psci_cpu_off
...
PSCI: Update state only if CPU_OFF is not denied by SPD
danh-arm
committed
on 7 Oct 2015
|
2015-10-06 |
PSCI: Update state only if CPU_OFF is not denied by SPD
...
This patch fixes an issue in the PSCI framework where the affinity info
state of a core was being set to OFF even when the SPD had denied the
CPU_OFF request. Now, the state remains set to ON instead.
Fixes ARM-software/tf-issues#323
Change-Id: Ia9042aa41fae574eaa07fd2ce3f50cf8cae1b6fc
Soby Mathew
committed
on 6 Oct 2015
|
2015-09-30 |
Merge pull request #401 from sandrine-bailleux/sb/fix-sp804-bug-v2
...
Bug fix in the SP804 dual timer driver
danh-arm
committed
on 30 Sep 2015
|
Merge pull request #400 from vwadekar/tlkd-pm-handlers-v5
...
Send power management events to the Trusted OS (TLK)
Achin Gupta
committed
on 30 Sep 2015
|
Merge pull request #393 from mtk09422/misc-updates
...
mt8173: Update SPM and fix watchdog setting
danh-arm
committed
on 30 Sep 2015
|
Send power management events to the Trusted OS (TLK)
...
This patch adds PM handlers to TLKD for the system suspend/resume and
system poweroff/reset cases. TLK expects all SMCs through a single
handler, which then fork out into multiple handlers depending on the
SMC. We tap into the same single entrypoint by restoring the S-EL1
context before passing the PM event via register 'x0'. On completion
of the PM event, TLK sends a completion SMC and TLKD then moves on
with the PM process.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Varun Wadekar
committed
on 30 Sep 2015
|
2015-09-28 |
Bug fix in the SP804 dual timer driver
...
The generic delay timer driver expects a pointer to a timer_ops_t
structure containing the specific timer driver information. It
doesn't make a copy of the structure, instead it just keeps the
pointer. Therefore, this pointer must remain valid over time.
The SP804 driver doesn't satisfy this requirement. The
sp804_timer_init() macro creates a temporary instanciation of the
timer_ops_t structure on the fly and passes it to the generic
delay timer. When this temporary instanciation gets deallocated,
the generic delay timer is left with a pointer to invalid data.
This patch fixes this bug by statically allocating the SP804
timer_ops_t structure.
Change-Id: I8fbf75907583aef06701e3fd9fabe0b2c9bc95bf
Sandrine Bailleux
committed
on 28 Sep 2015
|
Merge pull request #398 from achingupta/vk/fix_bakery_lock_size
...
Fix relocation of __PERCPU_BAKERY_LOCK_SIZE__ in PR #390
Achin Gupta
committed
on 28 Sep 2015
|
2015-09-25 |
Fix relocation of __PERCPU_BAKERY_LOCK_SIZE__
...
When a platform port does not define PLAT_PERCPU_BAKERY_LOCK_SIZE, the total
memory that should be allocated per-cpu to accommodate all bakery locks is
calculated by the linker in bl31.ld.S. The linker stores this value in the
__PERCPU_BAKERY_LOCK_SIZE__ linker symbol. The runtime value of this symbol is
different from the link time value as the symbol is relocated into the current
section (.bss). This patch fixes this issue by marking the symbol as ABSOLUTE
which allows it to retain its correct value even at runtime.
The description of PLAT_PERCPU_BAKERY_LOCK_SIZE in the porting-guide.md has been
made clearer as well.
Change-Id: Ia0cfd42f51deaf739d792297e60cad5c6e6e610b
Vikram Kanigiri
authored
on 24 Sep 2015
Achin Gupta
committed
on 25 Sep 2015
|
2015-09-22 |
Merge pull request #394 from achingupta/ag/ccn_driver
...
Support for ARM CoreLink CCN interconnects
Achin Gupta
committed
on 22 Sep 2015
|
2015-09-14 |
Add a generic driver for ARM CCN IP
...
This patch adds a device driver which can be used to program the following
aspects of ARM CCN IP:
1. Specify the mapping between ACE/ACELite/ACELite+DVM/CHI master interfaces and
Request nodes.
2. Add and remove master interfaces from the snoop and dvm
domains.
3. Place the L3 cache in a given power state.
4. Configuring system adress map and enabling 3 SN striping mode of memory
controller operation.
Change-Id: I0f665c6a306938e5b66f6a92f8549b529aa8f325
Achin Gupta
committed
on 14 Sep 2015
|
Tegra: Perform cache maintenance on video carveout memory
...
Currently, the non-overlapping video memory carveout region is cleared after
disabling the MMU at EL3. If at any exception level the carveout region is being
marked as cacheable, this zeroing of memory will not have an affect on the
cached lines. Hence, we first invalidate the dirty lines and update the memory
and invalidate again so that both caches and memory is zeroed out.
Change-Id: If3b2d139ab7227f6799c0911d59e079849dc86aa
Vikram Kanigiri
authored
on 10 Sep 2015
Achin Gupta
committed
on 14 Sep 2015
|
Make generic code work in presence of system caches
...
On the ARMv8 architecture, cache maintenance operations by set/way on the last
level of integrated cache do not affect the system cache. This means that such a
flush or clean operation could result in the data being pushed out to the system
cache rather than main memory. Another CPU could access this data before it
enables its data cache or MMU. Such accesses could be serviced from the main
memory instead of the system cache. If the data in the sysem cache has not yet
been flushed or evicted to main memory then there could be a loss of
coherency. The only mechanism to guarantee that the main memory will be updated
is to use cache maintenance operations to the PoC by MVA(See section D3.4.11
(System level caches) of ARMv8-A Reference Manual (Issue A.g/ARM DDI0487A.G).
This patch removes the reliance of Trusted Firmware on the flush by set/way
operation to ensure visibility of data in the main memory. Cache maintenance
operations by MVA are now used instead. The following are the broad category of
changes:
1. The RW areas of BL2/BL31/BL32 are invalidated by MVA before the C runtime is
initialised. This ensures that any stale cache lines at any level of cache
are removed.
2. Updates to global data in runtime firmware (BL31) by the primary CPU are made
visible to secondary CPUs using a cache clean operation by MVA.
3. Cache maintenance by set/way operations are only used prior to power down.
NOTE: NON-UPSTREAM TRUSTED FIRMWARE CODE SHOULD MAKE EQUIVALENT CHANGES IN
ORDER TO FUNCTION CORRECTLY ON PLATFORMS WITH SUPPORT FOR SYSTEM CACHES.
Fixes ARM-software/tf-issues#205
Change-Id: I64f1b398de0432813a0e0881d70f8337681f6e9a
Achin Gupta
committed
on 14 Sep 2015
|
Merge pull request #390 from vikramkanigiri/at/unify_bakery_locks_v2
...
Re-design bakery lock allocation and algorithm
Achin Gupta
committed
on 14 Sep 2015
|
Merge pull request #389 from vikramkanigiri/vk/css_rework
...
Add more configurability options in ARM platform port code
Achin Gupta
committed
on 14 Sep 2015
|
mt8173: fix watchdog register setting
...
This patch corrects the watchdog register setting. To update watchdog
register, the watchdog mode key must be set to make the register
configurable.
Change-Id: I9ca98ea4012f7f220b116013461030de4638ce0b
Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Jimmy Huang
authored
on 3 Sep 2015
Yidi Lin
committed
on 14 Sep 2015
|
mt8173: update spm suspend pcm codes
...
1. update suspend pcm code (add dummy apb read before mcusys power down)
BRANCH=none
BUG=none
TEST=verified
Change-Id: I2802cf8665fc1c8fe2304fd7d5f3eab9948b0b78
Signed-off-by: yt.lee <yt.lee@mediatek.com>
yt.lee
authored
on 20 Aug 2015
Yidi Lin
committed
on 14 Sep 2015
|
2015-09-11 |
Use unified bakery locks API in Mediatek port
...
This patch update Mediatek port to use the `DEFINE_BAKERY_LOCK` macro instead of
specifying the exact data structure to use for a bakery lock and the input
linker section that it should be allocated to.
Change-Id: I2116dbe27010bb46d7cc64fafef55c7240c4c721
Vikram Kanigiri
committed
on 11 Sep 2015
|
Update ARM platform ports to use new bakery lock apis.
...
This patch updates ARM platform ports to use the new unified bakery locks
API. The caller does not have to use a different bakery lock API depending upon
the value of the USE_COHERENT_MEM build option.
NOTE: THIS PATCH CAN BE USED AS A REFERENCE TO UPDATE OTHER PLATFORM PORTS.
Change-Id: I1b26afc7c9a9808a6040eb22f603d30192251da7
Vikram Kanigiri
committed
on 11 Sep 2015
|
Re-design bakery lock memory allocation and algorithm
...
This patch unifies the bakery lock api's across coherent and normal
memory implementation of locks by using same data type `bakery_lock_t`
and similar arguments to functions.
A separate section `bakery_lock` has been created and used to allocate
memory for bakery locks using `DEFINE_BAKERY_LOCK`. When locks are
allocated in normal memory, each lock for a core has to spread
across multiple cache lines. By using the total size allocated in a
separate cache line for a single core at compile time, the memory for
other core locks is allocated at link time by multiplying the single
core locks size with (PLATFORM_CORE_COUNT - 1). The normal memory lock
algorithm now uses lock address instead of the `id` in the per_cpu_data.
For locks allocated in coherent memory, it moves locks from
tzfw_coherent_memory to bakery_lock section.
The bakery locks are allocated as part of bss or in coherent memory
depending on usage of coherent memory. Both these regions are
initialised to zero as part of run_time_init before locks are used.
Hence, bakery_lock_init() is made an empty function as the lock memory
is already initialised to zero.
The above design lead to the removal of psci bakery locks from
non_cpu_power_pd_node to psci_locks.
NOTE: THE BAKERY LOCK API WHEN USE_COHERENT_MEM IS NOT SET HAS CHANGED.
THIS IS A BREAKING CHANGE FOR ALL PLATFORM PORTS THAT ALLOCATE BAKERY
LOCKS IN NORMAL MEMORY.
Change-Id: Ic3751c0066b8032dcbf9d88f1d4dc73d15f61d8b
Andrew Thoelke
authored
on 10 Sep 2015
Vikram Kanigiri
committed
on 11 Sep 2015
|
Merge pull request #388 from achingupta/ag/spd_suspend_levels_v3
...
Pass the target suspend level to SPD suspend hooks
Achin Gupta
committed
on 11 Sep 2015
|
Separate CSS security setup from SOC security setup
...
Currently, on ARM platforms(ex. Juno) non-secure access to specific
peripheral regions, config registers which are inside and outside CSS
is done in the soc_css_security_setup(). This patch separates the CSS
security setup from the SOC security setup in the css_security_setup().
The CSS security setup involves programming of the internal NIC to
provide access to regions inside the CSS. This is needed only in
Juno, hence Juno implements it in its board files as css_init_nic400().
Change-Id: I95a1fb9f13f9b18fa8e915eb4ae2f15264f1b060
Vikram Kanigiri
committed
on 11 Sep 2015
|
Define the Non-Secure timer frame ID for ARM platforms
...
On Juno and FVP platforms, the Non-Secure System timer corresponds
to frame 1. However, this is a platform-specific decision and it
shouldn't be hard-coded. Hence, this patch introduces
PLAT_ARM_NSTIMER_FRAME_ID which should be used by all ARM platforms
to specify the correct non-secure timer frame.
Change-Id: I6c3a905d7d89200a2f58c20ce5d1e1d166832bba
Vikram Kanigiri
committed
on 11 Sep 2015
|
Re-factor definition of TZC-400 base address
...
This patch replaces the `ARM_TZC_BASE` constant with `PLAT_ARM_TZC_BASE` to
support different TrustZone Controller base addresses across ARM platforms.
Change-Id: Ie4e1c7600fd7a5875323c7cc35e067de0c6ef6dd
Vikram Kanigiri
committed
on 11 Sep 2015
|