LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2011-10-14	02777bf Browse files » arm: at91: Add Atmel NAND support in config for at91sam9m10g45ek ... Contrary to other Atmel boards, the AT91SAM9M10G45EK board file only describes the case where NAND is used as the storage for Barebox and its environment. Therefore, it makes sense to enable the Atmel NAND driver in the default configuration for this board. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Thomas Petazzoni authored on 13 Oct 2011 Sascha Hauer committed on 14 Oct 2011
	30a124d Browse files » arm: at91: fix environment location in flash for multiple boards ... The environment partition was overlapping the Barebox partition in those three Atmel boards. Saving the environment resulted in the Barebox being overwritten. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Thomas Petazzoni authored on 13 Oct 2011 Sascha Hauer committed on 14 Oct 2011
	c351dab Browse files » Fix spelling of "omitted"; found by lintian ... Signed-off-by: Loïc Minier <loic.minier@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Loïc Minier authored on 13 Oct 2011 Sascha Hauer committed on 14 Oct 2011
2011-10-12	d9c41ea Browse files » ID fix for mx51 SDHC2 ... Hello. Please review this patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 30 Aug 2011 Sascha Hauer committed on 12 Oct 2011
	c3d7a97 Browse files » mci-core: fix typo for pr_warn ... It is pr_warning(), not pr_warn(). Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Schwebel authored on 10 Oct 2011 Sascha Hauer committed on 12 Oct 2011
	79c698b Browse files » menu: fix alinment ... Fixes alignment for the "System Type" menu entry. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Schwebel authored on 10 Oct 2011 Sascha Hauer committed on 12 Oct 2011
2011-10-09	97f3cc0 Browse files » Fixed unaligned access ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Fabian van der Werf authored on 9 Oct 2011 Sascha Hauer committed on 9 Oct 2011
2011-10-08	597da1b Browse files » Merge branch 'next' Sascha Hauer committed on 8 Oct 2011
	v2011.10.0 0e7c77a Browse files » Release v2011.10.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Oct 2011
	78f4c9f Browse files » sandbox: make asm/io.h nonempty ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Oct 2011
	c072195 Browse files » ARM nomadik: Add missing include ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Oct 2011
	0a716d4 Browse files » at91: add missing clkdev changes ... This fixes the following compile errors arch/arm/mach-at91/at91sam9g45.c:185:3: error: 'ohci_clk' undeclared here (not in a function) arch/arm/mach-at91/at91sam9g45.c:186:3: error: 'tcb1_clk' undeclared here (not in a function) arch/arm/mach-at91/at91sam9g45_devices.c: In function 'at91_add_device_mci': arch/arm/mach-at91/at91sam9g45_devices.c:258:2: warning: implicit declaration of function 'at91_clock_associate' [...] arch/arm/mach-at91/built-in.o: In function `at91_add_device_mci': sam9_smc.c:(.text.at91_add_device_mci+0x1d0): undefined reference to `at91_clock_associate' arch/arm/mach-at91/at91sam9260_devices.c: In function 'at91_add_device_mci': arch/arm/mach-at91/at91sam9260_devices.c:251:2: warning: implicit declaration of function 'at91_clock_associate' which were introduced in commit: "at91: swtich to clkdev" (`ae19fe2`) Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 15 Sep 2011 Sascha Hauer committed on 8 Oct 2011
	5edd6ef Browse files » at91: add spi clock connection id entries ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 15 Sep 2011 Sascha Hauer committed on 8 Oct 2011
2011-10-07	502ecda Browse files » Allow data-only i2c transfers ... Modified the i2c_imx driver to support data-only transfers, without command byte. This allows to construct more complex i2c transfers and support non genuine devices like Atmel ATxx secure memory, where the master reads data after a write command. Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rosen Kolev authored on 29 Sep 2011 Sascha Hauer committed on 7 Oct 2011
2011-10-04	c7efd11 Browse files » x86: Define byteorder ... This is required to avoid warnings like this: In file included from <some file>: include/io.h:7:5: warning: "__BYTE_ORDER" is not defined include/io.h:7:21: warning: "__BIG_ENDIAN" is not defined Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 30 Sep 2011 Sascha Hauer committed on 4 Oct 2011
2011-09-29	d68f29f Browse files » spi: indicate in the docs that per-transfer bpw setting is not supported ... Currently it's not implemented by any driver so add a note to the documentation. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 30 Aug 2011 Sascha Hauer committed on 29 Sep 2011
	686bd97 Browse files » spi: enfore default bits_per_word value ... Documentation says it should default to 8 when not specified explicitly by the device data. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 29 Aug 2011 Sascha Hauer committed on 29 Sep 2011
	67f2dcc Browse files » spi: let master a chance to setup device before registering it ... Call setup() before registering the device because registering leads to a probe routine of the slave device and that requires an initialised master. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 29 Aug 2011 Sascha Hauer committed on 29 Sep 2011
2011-09-28	b47fcc9 Browse files » mach-imx: iim: cosmetic changes to the code to make it easier to follow ... This brings consistency to the way variables are named and used according to the Freescale documentation. Also, since user is supplying row indicies, and not offsets, it's reasonable to amend the error message accordingly. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 28 Sep 2011 Sascha Hauer committed on 28 Sep 2011
	3f21c6e Browse files » mach-imx: iim: clarify documentation ... This adds additional Kconfig help to clarify the way to use barebox for eFuses handling. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 28 Sep 2011 Sascha Hauer committed on 28 Sep 2011
	7b49dc3 Browse files » image: move map_image amd unmap_image to image.c ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Sep 2011 Sascha Hauer committed on 28 Sep 2011
	d1ffab8 Browse files » image: add multi image support for bootm ... you can choose the initrd via @<num> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Sep 2011 Sascha Hauer committed on 28 Sep 2011
	bd7f9b5 Browse files » image: use data base addr for image_print_contents, image_multi_count/getimg ... as in barebox the data could be the mapped file or a allocated memory with just the data (non header) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Sep 2011 Sascha Hauer committed on 28 Sep 2011
	4dbe725 Browse files » Merge branch 'pu-ppc' into next Sascha Hauer committed on 28 Sep 2011
	d25d8fe Browse files » Merge branch 'usb-massstorage' into next Sascha Hauer committed on 28 Sep 2011
2011-09-27	7d593c7 Browse files » net fec_mpc5200: disable fec on shutdown ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2011
	0e811d1 Browse files » ppc common.h: remove unused function declarations ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2011
	a97e68d Browse files » ppc mpc5200: remove various board specific register setup from generic code ... The boards can do this themselves, no need for ifdef orgies. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2011
	14da1c7 Browse files » ppc mpc5200: remove cs setup from cpu_init ... If a board wishes to setup a chipselect, it can use mpc5200_setup_cs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2011
	5e50ab4 Browse files » pcm030: cleanup config.h ... Remove several now unnecessary defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2011