startup: Add missing newline to notice message ...

Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: get function returns masked register value ...

Unlike Linux the generic driver get function returns the masked register
content and not the 0 or 1 value. The consequence is that gpio_get_value
returns for instance 0x10 for bit 4 instead of 1.
Use the Linux normalized form instead.

Signed-off-by: Renaud Barbier <renaud.barbier@abaco.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: stm32: support new st,stm32mp15-i2c compatible ...

Linux v5.8-rc1 has gained support for the FastMode+ registers on the
stm32mp15, but those are incompatible between the stm32mp15 and the
stm32f7, so a new compatible was introduced. The old compatible was
replaced for the MP15 SoC, breaking I2C in barebox.
Add the new compatible to fix this.

Unlike Linux, we just use the same setup parameters as for the stm32f7.
This is ok as long we don't want to support FastMode+.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/rsatoc: fix printing of error message, if environment variable doen't contain a path ...

Fixes: 128ad3cbe043 ("scripts: Add rsatoc tool")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation/sandbox: fix code block ...

Remove unneeded colon.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/watchdog'

Merge branch 'for-next/tlsf'

Merge branch 'for-next/ratp'

Merge branch 'for-next/ramfs'

Merge branch 'for-next/module'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/kvx'

Merge branch 'for-next/kbuild'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/elf'

Merge branch 'for-next/dts-phandles'

Merge branch 'for-next/dts'

Merge branch 'for-next/at91'

Release v2020.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: dts: sama5d27-som1: adapt to upstream partition layout ...

Linux v5.8-rc1 adds partitions to the flash@0 node, which now overlap
with the partitions we define and resulting in errors:

  ERROR: m25p0.barebox: New partition m25p0.barebox conflicts
	with m25p0.at91bootstrap
  ERROR: m25p0.barebox-environment: New partition
  	m25p0.barebox-environment conflicts with m25p0.bootloader

We don't want to reuse those partitions as their name may and probably
will change (they have leading zeroes in the unit address).
We could use the &{/path/to/partition} syntax, but that might be broken
soon as well, as the nodes aren't inside a partitions node with a
"fixed-partitions" compatible.
The busses also don't align with the yaml schema and might be renamed.

Nuke the full flash@0 node and supply ours and avoid these problems.
The offsets of the partitions have been adjusted to coincide with the
upstream offsets for second stage bootloader and environment.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-giantboard: add default environment/bbu ...

The board only has SD-Card as storage. Add a barebox update handler to
flash barebox to it, as well as an nv.boot.default=mmc1 to boot from it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-giantboard: add additional first stage entry point ...

The BootROM constrains us to a 64K big first stage bootloader. Add a PBL
entry point for a xload barebox that sets up the minimum necessary to
load a FAT32 barebox.bin from the SD-Card.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-som1-ek: add barebox_update and multi environment support ...

We now have second stage support for running from sdmmc0 and sdmmc1.
Add a barebox environment and update handler for the two SD cards.

As fall back, we use the environment in the QSPI flash as before as this
is soldered to the SoM and is always available.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d2: populate $bootsource and $bootsource_instance ...

The BootROM passes us information about the boot medium in r4 and we
already use that in first stage and pass it along to second stage
PBL already. To make use of it, we need to pass it to barebox proper, do
this by writing it in the last 4 bytes of the SRAM. As second stage
always run in DRAM, this is safe to do.

We could also write to SRAM directly from first stage, but at91bootstrap
passes info in r4 as well for the sama5d3 boards, so we do it likewise
to maintain compatibility.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d2: read back memory size from DDRAM controller ...

We hard code memory size at three places:
 - In the configuration we use to initialize the DDRAM controller
 - In the minimal available size passed from PBL to barebox proper
 - In the device tree memory node override

Remove the two latter ones and replace them with code that reads the
size back from controller.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/lib64: Convert to SPDX-License and -Copyright specifiers ...

Converts the files that licensecheck can determine the license for. Also
convert to obvious right Copyright statements. Additionally some minor
code reformatting is done.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Convert files covered by ARM copyright to SPDX ...

According to Marc Zyngier, former employee at ARM, the company owns the
copyright for code created by its employees. Convert accordingly to SPDX
with the usual rearrangements. Also dropped Marc's email address which
doesn't work any more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/include: Convert to SPDX-License and -Copyright specifiers ...

Converts the files that licensecheck can determine the license for. Also
convert to obvious right Copyright statements. Additionally some minor
code reformatting is done.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>