drivers: Introduce dev_set_name() ...

Introduce dev_set_name() in order to hide implementation details of
setting device's name so it'd be easier to change it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aiodev: qoriq_thermal: Give aiodev a more descriptive name ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aiodev: imx_thermal: Give aiodev a more descriptive name ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aiodev: Don't try to use DT node name as aiodev->name ...

Don't try to use DT node name as aiodev->name in aiodev_regster()
since, for some devices (e. g. tempmon) than name would already be
taken by parent platform device.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Demote "Bad cell count for" to debug ...

There are valid use-cases where getting OF_BAD_ADDR via that codepath
is expected. In addition to that analogous code in Linux kernel uses
pr_debug as well.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: Introduce ARCH_HAS_IMX_GPT ...

Not all SoCs use i.MX GPT block as a clocksource, so introduce
ARCH_HAS_IMX_GPT to mark the ones that do.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: Move GPT driver to drivers/clocksource ...

Move GPT driver to drivers/clocksource and rename it to
timer-imx-gpt.c to match Linux kernel as well as to keep all
clocksource drivers in a common location.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

VFxxx: Select CLOCKSOURCE_ARM_GLOBAL_TIMER ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: Add ARM global timer support ...

Port corresponding Linux kernel driver. Currently VFxxx SoC is the
intended consumer because it doesn't include common i.MX GPT block
used as clocksource by other i.MX SoCs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Do not expose ARMv8 functions on ARMv7 ...

Assembly implementing current_el(), read_mpidr(), set_cntfrq(),
get_cntfrq() and get_cntpct() is ARMv8 specific, so change #if guard
protecting it to reflect that fact.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: fix compile warnings ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: make routing work after dhcp command ...

At the moment only ifup stuff turns netif up.
After the commit f0624a701513 ('net: Do not route traffic
to interfaces that are not up') the dhcp command
keeps netif->ifup == false and network subsystem
can't route packets.

How to repropduce the problem on qemu-malta_defconfig:

    qemu-system-mips -nodefaults -M malta -m 256 \
                     -nographic -serial stdio -monitor null \
                     -bios barebox-flash-image \
                     -net user -net nic,model=rtl8139

    ...

    barebox:/ dhcp
    eth0: 100Mbps full duplex link detected
    eth0: DHCP client bound to address 10.0.2.15
    barebox:/ ping 10.0.2.2
    ping failed: No route to host

However if ifup command is used for network interface
configuration then there is no network problem, e.g.

    barebox:/ ifup eth0
    eth0: 100Mbps full duplex link detected
    eth0: DHCP client bound to address 10.0.2.15
    barebox:/ ping 10.0.2.2
    host 10.0.2.2 is alive

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
CC: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: bypass overlap check for mtd devices ...

For mtd devices the overlap check does not work as expected for two
reasons. First is that cdev->offset is 0 for mtd partitions, instead
cdev->mtd->master_offset has to be used. That could be fixed easily.
Second on NAND devices the environment is on the bb devices and not
on the raw nand devices which means we would need something to get
the mtd device from the bb device before doing the check.

Both issues are fixable, but the check was mainly done to catch cases
when an environment partition is created in the free space before the
first MBR/GPT partition on SD/MMC devices, so leave out the mtd case
for now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: Fix overlapping partitions error message ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Fixes: b234a6da331f ("environment: Do not use environment when
                      overlapping with other partitions")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubifs'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/ratp'

Merge branch 'for-next/net-imx-fec'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/fs'

Merge branch 'for-next/dts'

Merge branch 'for-next/bbu'

dts: update to v4.19-rc7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc5 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc3 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.10.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

digest.h: Sync hash_algo values with kernel ...

enum hash_algo is exported from the Kernel, so sync it with the numbers
that are exported. Since we have barebox specific extensions to the
hash_algo list add a big comment and put the extenstions at the end.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>