docproc: drop unused utility ...

Signed-off-by: Sergey Koshechkin <serge.koshechkin@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mk-omap-image: make some locally used functions static ...

Signed-off-by: Sergey Koshechkin <serge.koshechkin@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: mx25: fix bit position of "Host power mask" ...

The bit MX25_H1_PM_BIT value is handled for port 1 as MX25_OTG_PM_BIT is
for port 0. The latter is called "OPM: OTG power mask" in the i.MX25
reference manual. Its description matches the description of "HPM: Host
power mask" for the host port which is bit 16, not 8.

The Linux kernel (as of 4.3) also has

	#define MX25_H1_PM_BIT                  BIT(16)

.

Fixes: a4076ddf6577 ("USB i.MX: Add chipidea driver support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: smhfs: Fix return value of truncate() ...

Returning -ENOSYS as a result of truncate() breaks ability to write to
semihosting host's filesystem, so change the return value to 0. This
shouldn't cause any problems since all of the funcionlaity of
truncate() should is already handled by 'open' (via O_TRUNC) and
'write' (will automatically grow the file size when writing)
automatically

Unfortunately this was missed in original commit that introduced
semihosting

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/net'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/memtest'

Merge branch 'for-next/imx'

Merge branch 'for-next/arm'

Release v2015.11.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: alloc or free shadowfb whether fb enabled or disabled ...

Resolution can't be changed anyway once fb_enable() has been called,
since no corresponding fb_disable() call appears in the code.

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: satisfy semantics for shadowfb's alloc/free ...

Console enable -> alloc shadowfb.
Console disable -> free shadowfb.
Otherwise, if resolution gets changed, shadowfb will not be affected.

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fbconsole: no need to copy extra line ...

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: return error when save_file failed ...

When writing a file failed (e.g. due to a read-only file system), no
error was reported by the 'edit' tool. To be valid (and to not confuse
the poor user) at least '1' should be returned to indicate an error.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: handle write() call errors in save_file() ...

save_file() did ignore possible errors of its write() calls.
Now the error code is used as return code for save_file().

write_full() is used instead of write() as it does not perform partial
writes which would require to check for returned size, too.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: Embedsky E9: use image name like the rest of boards ...

Use name similar to other boards thus remove freescale from image
name since this is not a Freescale board, move SoC type after
company name.

So image name changed from barebox-freescale-imx6q-embedsky-e9.img to
barebox-embedsky-imx6q-e9.img

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

embedsky-e9: enable barebox_update command for booter update ...

Simplify booter update with barebox_update command using special
IMX6 MMC BBU handler.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: wait for link OK after successfull autonegotiation ...

It may take some time for PHY to indicate link OK status after
autonegotiation completed. This change addresses this case
and prevent network commands fails due to the delay.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap socfpga: Switch in flash env loading to use different config ...

On these systems, the base arch has code to load the in flash
environment from a file located in a FAT filesystem.  This was
controlled by the config option DEFAULT_ENVIRONMENT.  However, that
option turns on compiling the env into the barebox binary itself, as a
backup if the in flash env can't be loaded.

Most other boards have in flash env support unconditionally.  But omap
and socfpga also have xloader configurations, which aren't supposed to
have environment support, either in flash or compiled in.  If the in
flash env code were unconditional, then the xloaders would gain it.

So the code depends on ENV_HANDLING, which is only set on those boards
that are supposed to have an in flash env and not set on all the
boards that aren't supposed to have it.

If someone wanted to create a board that did have a saved env, but
used an alternate to this generic omap/socfpga file in FAT method,
then they'd probably want to create a new config option to control
this code and have it not be enabled for their board.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Print versions with micro levels correctly ...

The version is stored as BCD, e.g. 0x40 -> ".4" and 0x41 -> ".41".
The latter was getting printed as ".65".  Simplify the logic a bit to
not split the minor into nybbles just to re-assemble it into a byte
again.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: am335x_defconfig: Enable SMSC phy driver ...

The phyCORE-AM335x has a SMSC phy mounted. Enabled the driver for it.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: phyFLEX-AM335x: Disable second ethernet interface ...

There are phyFLEX modules with only the first eth phy mounted.
As barebox only supports the first interface anyway, disable
the second interface for now.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hush: Add missing initialize_context() in some places ...

Before a context can be used it must be initialized. This was forgotten
in several places. Add the missing calls to initialize_context().
This fixes crashes when sourcing empty files

Reported-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fcntl: Fix O_CREAT clashing with O_RWSIZE_8 ...

O_CREAT and O_RWSIZE_8 are both defined as 0100. Fix this by moving the
O_RWSIZE_* flags to unused bits.

This bug leads to incomplete writes when the destination file is created
and mem_write is involved, for example with the memcpy command:

memcpy -s /some/file -d /dev/ram0 0 0 10

In this case only 8 bytes will be copied and it will be done using 8
byte accesses which may not work properly if the destination is not
sufficiently aligned, i.e.:

memcpy -s /some/file -d /dev/ram0 0 1 8

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

memtest: Make cached/uncached test configurable ...

Add options to explicitly test cached/uncached tests. Without these
options still both cached and uncached is tested if remapping is
supported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: By default only test biggest region ...

Often enough the biggest free region spans most free RAM, so
it doesn't add much value to test the remaining free regions. This
patch changes the default behaviour to only test the biggest free
region and adds the -t option to test all regions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: move error handling to end of function ...

Move error handling out of the test code to make the actual test
better visible.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>