pstore: ramoops: use correct format specifier for size_t variables ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: zynqmp-fpga: fix comparison between pointer and integer ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pstore: don't try to grab non-existent logbuf ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: usb251xb: depend on OFDEVICE ...

The usb2551x driver gets all its configuration info from the DT, so
there is no point in allowing this driver to be build when probing
from DT isn't enabled.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: always walk down into i2c/busses Makefile ...

Otherwise CONFIG_I2C_IMX_EARLY won't be built if !CONFIG_I2C even
though it has no direct dependency on the i2c core.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: MCI_IMX_ESDHC_PBL has no dependency on MCI ...

While it is located in the MCI deirectory, it has no direct dependency
on the MCI core, so it should not be under the MCI condition in Kconfig.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: don't try to register gpiochip when GPIOLIB isn't built ...

Fixes: feee4b638048 (gpio: add DA9062 MFD gpio support)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: don't call BBT functions if BBT support isn't built ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: dwc3: depend on OFDEVICE ...

The DWC3 driver uses some functions which are only available when
Barebox is built with OFDEVICE support. Since there is no platform
without DT support suing DWC3 we can reasonably depend on this
config option.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mxs: bcb: declare locally used functions as static ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: psci: declare locally used functions as static ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: add missing semicolon after EXPORT_SYMBOL ...

Fixes: efd517c35f12 (mfd: add basic Super I/O chip helpers)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: fix symbol export for spi_register_controller ...

Fixes: 812a9ddcdf21 (spi: Generalize SPI "master" to "controller")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: add stub for reset_source_set_device ...

Fixes: a0748840c104 (reset_source: implement helper to set a
       device as reset source)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gui: picopng: declare locally used functions as static ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: keystore: use correct type for s_len ...

Fixes the follwing warning: "passing argument 2 of 'read_file_2'
from incompatible pointer type".

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: provide stubs for ctrlc_* functions ...

Currently the stubs are only provided for CONFIG_CONSOLE_SIMPLE, but
they are also needed for CONSOLE_NONE. Move them to the header.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lib: zstd: declare locally used functions as static ...

Fixes "no previous prototype for...) warnings in the zstd code.

Fixes: 1a39d4dcbffc (lib: Add zstd decompression module)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: implement CONFIG_PBL_BREAK for ARM64 ...

ARM64 uses a different assembler mnemonic for the breakpoint.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: move into ARM32 specific optee kernel start into lib32 dir ...

Otherwise it may also get built on a ARM64 config, which obviously
fails.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: add more build dependencies ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pstore: remove unused goto label ...

Previous refactoring removed jumps to fail_clear. Remove it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pstore: fix build by re-resolving botched merge conflict ...

297ac7288 ("pstore: Only capture log messages") removed the pstore console.
v3 of the eventually merged 75a74b5c ("console: fix out-of-bounds read
in dputc(/dev/*, ...)") reinstated part of this code, which broke the
pstore build because the now removed bufsize member had a user
reintroduced in the patch.

Fix this by reverting the offending patch's changes to the pstore code.
It wasn't applicable to begin with.

Fixes: 75a74b5c ("console: fix out-of-bounds read in dputc(/dev/*, ...)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9053: fix typo in variable name ...

Fixes: 06928c7d1758 (mfd: da9053: use new reset_source_set_device)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

image: add zynqimg to gitignore ...

Those are results of the Zynq image build, don't clobber the
git status output.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: fix NULL pointer use in dev_printf ...

Inside mdio_register, a read of the PHY's id register is attempted.
If it fails, we print an error message with eqos_err, which uses the
ethernet device's unique name, but at this time there has been none set,
because eth_register was not yet called. Fix this by using the MDIO bus
device instead.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: enable clocks before mdio_register ...

We can't be using the MAC including the MDIO controller while the clocks
are off, but this is exactly the case when mdio_register is called and
the interface is not yet up. To allow reading the PHY id to succeed
before the interface is up, turn on the clocks as part of the
initialization in the probe.

This fixes following error at probe time:

    ERROR: <NULL>: MDIO not idle at entry

The NULL is fixed in a follow-up commit.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: properly stop DMA on halt ...

Specifying ->halt only means that it's called along with eth_unregister.
If we want to halt the DMA, we will have to call it ourselves in the
remove callback. Do this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: mvebu: Fix kwbimage v1 detection ...

The kwbimage detection calculates a checksum over the first 31 bytes of
the image. This is correct for the v0 image format, but for the v1 image
format the checksum in the image also covers the extenstion headers.
These might not be completely present in the initial buffer provided to
file_detect_type(), so just drop the checksum calculation for v1 images.

Fixes: bf8b6d46db ("kwbimage_v0: add support to detect and boot a mvebu v0 image")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: dwc3: Remove wrong error messages ...

When phy_get() returns -ENOSYS or -ENODEV it means we can go without
phy. Do not print an error message in this case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>