LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2016-05-09	216f412 Browse files » Merge branch 'for-next/imx6-phytec' Sascha Hauer committed on 9 May 2016
	21981db Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 9 May 2016
	8e2df29 Browse files » Merge branch 'for-next/bootm' Sascha Hauer committed on 9 May 2016
	23debc6 Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 9 May 2016
	v2016.05.0 f5142b8 Browse files » Release v2016.05.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 May 2016
	b66a106 Browse files » mci: imx-esdhc: implement reset quirks for i.MX6 DualLite/Solo ... First of all the reset values of MMC interfaces are differently between Quad and DualLite/Solo SoM. Register VEND_SPEC2(0xC8) Quad: 0x0 DualLite: 0x00000006 default: 0x00000006 (from i.MX6 Reference Manual) Furthermore the ROM Code of Quad and DualLite uses the MMC interfaces differently when it loads the bootloader from that device: Register DLL_CTRL(0x60) Bit 25 FBCLK_SEL (0x48) Quad: 0x0 0 DualLite: 0x01000021 1 Since the linux kernel and barebox driver doesn't reset all registers, the MMC interface is in an inconsistent state, which leads to boot failures for some eMMC devices on the i.MX6 DualLite SoM. The errors look like: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0x400900 mmcblk3: error -84 transferring data, sector 24578, nr 2, cmd response 0x900, card status 0x0 mmcblk3: retrying using single block read mmcblk3: error -84 transferring data, sector 24578, nr 2, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk3, sector 24578 It's sufficient to reset register DLL_CTRL and bit FBCLK_SEL. Register VEND_SPEC2 has no effect. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 4 May 2016 Sascha Hauer committed on 9 May 2016
2016-05-04	07511ba Browse files » ARM: phytec-som-imx6: add automount for first partition on eMMC ... For the phyCORE-i.MX6 add an automount command for the first partition on the eMMC device. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 4 May 2016 Sascha Hauer committed on 4 May 2016
	a91ce45 Browse files » blspec: push appendroot handling to bootm ... The bootm code now can handle the adding of the root= option itself, so drop the code and let bootm do it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
	f66990a Browse files » bootm: Optionally add a root= option to Kernel command line ... It becomes a common case that the Kernel is loaded from the filesystem which later becomes the rootfs. This adds a possibility to let bootm automatically append the root= option to the kernel command line. This is done when global.bootm.appendroot is true. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
	a9b1867 Browse files » parameter: Use strtobool ... Use strtobool to convert the input string to a boolean type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
2016-05-02	95e1132 Browse files » ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc ... Enable NOR for phyCORE-i.MX6 DualLite and Quad eMMC variants. Furthermore add an extra 'status = "disabled"' in the flash node. It has no functional effect, because the SPI bus node 'ecspi1' is disabled, too. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	a6ec1b5 Browse files » ARM: phytec-som-imx6: adapt main update handler for eMMC ... Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an update_handler for them. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ac02c15 Browse files » ARM: phytec-som-imx6: rename environment folder ... The extra environment folder for the phyCORE-i.MX6 had the suffix '-mira'. That's the name of a baseboard. Since the bootloader is generic for all baseboards, use a generic suffix for the environment folder. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	da3938f Browse files » ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl ... Update RAM calibration values in the flashheader file for phyCORE-i.MX6 DualLite/Solo. These are verified and tested in the climatic chamber for commercial, extended commercial, industrial and automotive i.MX6 variants. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	313e01f Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite ... Add Phytec phyCORE-i.MX6 SOM. Support: - imx6dl-phytec-phycore-som-emmc: - 1GB RAM on 1 Bank with 64Bit - 10/100MBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	cb3fc0d Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM ... Add new Phytec phyCORE-i.MX6 SOM: Support: - imx6q-phytec-phycore-som-emmc: - 2GiB RAM on 1 Bank with 64Bit - 1GBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	c3318ae Browse files » ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6 ... The phyCORE-i.MX6 has either a NAND or EMMC storage device and an external SD-Card interface. The automatic bootsource detection in the barebox environment should reflect that. - If the board was booted from the external SD-Card interface, it should continue loading the kernel and device tree from it. - If the board was booted from EMMC, it should load kernel and device tree from the boot partition on the EMMC. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	0a7a5e7 Browse files » ARM: phytec-som-imx6: add barebox partitions for MMC ... Add missing MMC barebox environment partitions for the phyCORE-i.MX6 with EMMC. Otherwise the barebox cannot find the environment, when the board is boot from sd-card. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	52fdd51 Browse files » ARM: dts: pfla02: use long enough reset for ethernet phy ... Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	90b2fa7 Browse files » ARM: dts: imx6: phyboards: reduce clock speed for usdhc3 ... Due to hardware issues the usdhc3 interface on phyBOARD-ALCOR i.MX6 and phyBOARD-SUBRA i.MX6 doesn't work reliable at 50Mhz. You get communication errors like barebox@Phytec phyBOARD SUBRA:/ ls /mnt/mmc/ mmc2: detected SD card version 2.0 mmc2: registered mmc2 imx-esdhc 2198000.usdhc: timeout 2 mmc2: Cannot read MBR/partition table Therefore reduce the maximum clock speed to avoid these problems. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	6444998 Browse files » imx6qdl-phytec-pfla02.dtsi: add i2c eeprom ... add atmel,24c32 mounted on module Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Remmet authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ca5964b Browse files » ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad ... Add support for phyBOARD-SUBRA-i.MX6 with phyFLEX-i.MX6 Quad 1GiB on one bank. This patch factors out the common device tree nodes for the Quad and Solo variant into 'imx6qdl-phytec-phyboard-subra.dtsi'. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	8b0a448 Browse files » ARM: imx_v7_defconfig: add command mmc_extcsd ... Enable the mmc_extcsd command to read and write MMC/eMMC registers. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	075de1e Browse files » ARM: imx_v7_defconfig: enable NANDTEST command ... Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-04-29	a66b7f8 Browse files » getenv_bool: use strtobool ... We now have a library function to convert a string to a boolean type. Use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
	22b8e94 Browse files » string: Introduce strtobool ... We have at least two places which convert a string to a boolean type, so create a common function for this. strtobool treats - any positive (nonzero) number as true - "0" as false - "true" (case insensitive) as true - "false" (case insensitive) as false Every other value results in an error and the input val is not modified. The caller is expected to initialize val with the correct default before calling strtobool. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
	941056d Browse files » globalvar: Allow to remove globalvars ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
2016-04-28	005cd22 Browse files » sata-imx: Fix a typo ... It looks like comma operator was accidentaly used instead of regular semicolon. Fix this to avoid confusing future readers of the code. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 27 Apr 2016 Sascha Hauer committed on 28 Apr 2016
	4e3e8e6 Browse files » documentation: i2c_read() does not expect any "DATA". ... Remove information about DATA from help text. Signed-off-by: Andreas Geisenhainer <Andreas.Geisenhainer@atsonline.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andreas Geisenhainer authored on 27 Apr 2016 Sascha Hauer committed on 28 Apr 2016
	9d5cf8d Browse files » ARM: i.MX: karo-tx6: Add support for the 2GiB i.MX6q+ board variant ... Different SDRAM setup, but same board otherwise. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016