firmware: altera-serial: add support for Arria 10 ...

Make FPGA specific settings configurable (padding, spi bits per word,
delays) and add Arria 10 support. The Arria 10 compatible is the same
as in the kernel patch "fpga manager: Add altera-ps-spi driver for
Altera FPGAs" (drivers/fpga/altera-ps-spi.c). The Arria 5 compatible
works unchanged.

This patch was tested with Arria 5 and Arria 10.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: move kwboot description to generic mvebu section ...

Expand the generic part about kwboot to the mvebu page and advertise the
parameter -n to make it simpler to boot some machines.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: mvebu can do 2nd stage booting ...

Since commit

	823d08e3e261 ("kwbimage_v1: add support to boot a mvebu image")

barebox can use bootm to load a 2nd barebox image. Update the
documentation accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: mount: mention file loop mounts in the help text ...

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: add cdev_create_loop and cdev_remove_loop for loop mount option ...

Allow to create a loopback cdev from a file.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fixed up with:

fs: Makefile: Add parseopt to all builds

parseopt.h was included to fs.c with commit 9248b, but parseopt.o has a
dependency to CONFIG_FS_NFS.

Moved parseopt.o to the default build to eliminate build failures.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: add parseopt_b for loop mount option ...

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

new make helper to decode binaries using base64 ...

This is helpful to provide mvebu binary.0 images with a patch. When
added directly a binary patch is needed which isn't understood by
patch(1).

As it's (at least) unclear if these images are distributable in general
I don't provide a patch making use of this, but the pattern is as
follows: Add

	$(obj)/start_netgear_rn2120.pblx.kwbimg: $(board)/netgear-rn2120/binary.0

to images/Makefile.mvebu and then put a binary.0.base64 into the board
folder.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: mount: combine dev and devstr, which are the same ...

Unify the device path used by the default mount and mount with specified
mount point paths.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cdev: make file operations const ...

scripts/checkpatch.pl warns that struct file_operations should be const,
but cdev->ops is not const, so without this patch we can choose between
a warning from checkpatch and a warning from the compiler about
discarding the const attribute when assigning the struct file_operations
cdev->ops.

Since there is no reason to modify the contents of cdev->ops after
probing, make it const.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: mv64xxx: fix indentation ...

The patch fixes this compiler's warning:

    drivers/i2c/busses/i2c-mv64xxx.c: In function ‘mv64xxx_i2c_fsm’:
    drivers/i2c/busses/i2c-mv64xxx.c:303:3: warning: this ‘if’ clause does
    not guard... [-Wmisleading-indentation]
       if (drv_data->bytes_left == 1)
       ^~
    drivers/i2c/busses/i2c-mv64xxx.c:305:4: note: ...this statement, but the
    latter is misleadingly indented as if it is guarded by the ‘if’
        udelay(2);
        ^~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

true: make true_aliases[] const ...

Although the elements of `true_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

test: make test_aliases[] const ...

Although the elements of `test_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

help: make help_aliases[] const ...

Although the elements of `help_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: make edit_aliases[] const ...

Although the elements of `edit_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hush: make source_aliases[] const ...

Although the elements of `source_aliases[]` are of type `const char *`,
the elements themselves are not const-qualified.  Make them `const`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: allow <cmd>_aliases[] to be const ...

Commands with aliases define an array of alias strings such as:

  static const char *<cmd>_aliases[] = { "<alias1>", NULL};

Although the elements are of type `const char *`, the elements
themselves are not `const`-qualified.  If the array is declared as:

  static const char * const <cmd>_aliases[] = { "<alias1>", NULL};

then the compiler warns about const qualifiers being discarded.  This is
because the `aliases` member of `struct command` is declared as `const
char *aliases;`.

Change the declaration of the `aliases` member of `struct command` to
`const char * const *aliases;` so that it can point to a `const` array
of `const char *`.  Also change the declaration of the `aliases`
variable in `register_command()` to avoid unnecessary type casts.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add ':' as alias for 'true' ...

':' is the null command, sometimes used in shell scripts (especially
after 'then'), but it is not yet supported by barebox.  It is supposed
to do nothing, successfully, just like the 'true' command, so add it as
an alias.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Search for /memory node by type, if it is not found by name ...

Update of Rockchip dts featured changes of simple "/memory" node
to "/memory@6000000". Support this change.

Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: provide documentation for RNG interfaces. ...

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc-lib: drop unused rtc_ydays ...

The patch fixes this compiler's warning:

    drivers/rtc/rtc-lib.c:23:29: warning: ‘rtc_ydays’ defined but not used [-Wunused-const-variable=]
     static const unsigned short rtc_ydays[2][13] = {
                                 ^~~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Create automount entries for the default mount pathes ...

In barebox the default mount path for a cdev is /mnt/<cdevname>
which can be mounted with "mount <cdevname>" without specifying
a target path explicitly. Simplify this further by creating automount
entries for the default mount pathes which makes a manual mount
completely unnecessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: usbgadget: update fastboot help text ...

cmd_usbgadget can use now the fallback to
global.usbgadget.fastboot_function. Update help text to reflect this
behavior.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usbgadget: provide autostart notes ...

The usbgadget autostart functionality is already added. It's
time to reflect it in the documentation.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clock: initialize dummy clocksource statically ...

Assigning the dummy clocksource in a initcall has the problem that
get_time_ns() crashes before that initcall is executed. This happens
when dmesg support is enabled in conjunction with CONFIG_DEBUG_INITCALLS.
In this case the dmesg code wants to have the timestamp of a log
message.
Solve this by setting the current clocksource to the dummy clock
statically and not at runtime. This way we always have a dummy
clock available.

Fixes:
commit 8972eb7
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Fri Mar 3 13:34:02 2017 +0100

    clocksource: move dummy clock source to init_clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/parameter-types'

Merge branch 'for-next/omap'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'