2004-06-09 |
* Patch by Yuli Barcohen, 09 Jun 2004:
...
Add support for Analogue&Micro Adder87x and the older AdderII board.
* Patch by Ming-Len Wu, 09 Jun 2004:
Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
wdenk
committed
on 9 Jun 2004
|
Patch by Sam Song, 09 Jun 2004:
...
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
wdenk
committed
on 9 Jun 2004
|
* Patch by Mark Jonas, 08 June 2004:
...
- Make MPC5200 boards evaluate the SVR to print processor name and
version in checkcpu() (cpu/mpc5xxx/cpu.c).
* Patch by Kai-Uwe Bloem, 06 May 2004:
Fix endianess problem in cramfs code
wdenk
committed
on 9 Jun 2004
|
* Patch by Tom Armistead, 04 Jun 2004:
...
Add support for MAX6900 RTC
* Patches by Ladislav Michl, 03 Jun 2004:
- fix cfi_flash.c on LE systems
- let 'make mrproper' delete u-boot.img as well
- turn printf into debug in cfi_flash.c
wdenk
committed
on 9 Jun 2004
|
Patch by Kurt Stremerch, 28 May 2004:
...
Add support for Exys XSEngine board
Some code cleanup.
wdenk
committed
on 9 Jun 2004
|
* Patch by Martin Krause, 27 May 2004:
...
Fix a MPC5xxx I2C timing issue in i2c_probe().
* Patch by Leif Lindholm, 27 May 2004:
Fix board_init_f() for dbau1x00 board.
wdenk
committed
on 9 Jun 2004
|
* Patch by Imre Deak, 26 May 2004:
...
On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
Set flash base accordingly, and decide whether to do or skip board
specific setup steps.
* Patch by Josef Baumgartner, 26 May 2004:
Add missing define in include/asm-m68k/global_data.h
wdenk
committed
on 9 Jun 2004
|
* Patch by Josef Baumgartner, 25 May 2004:
...
Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
* Patch by Paul Ruhland, 24 May 2004:
fix SDRAM initialization for LPD7A400 board.
wdenk
committed
on 9 Jun 2004
|
Patch by Jian Zhang, 20 May 2004:
...
add support for environment in NAND flash
wdenk
committed
on 9 Jun 2004
|
Patch by Yuli Barcohen, 20 May 2004:
...
Add support for Interphase iSPAN boards.
wdenk
committed
on 9 Jun 2004
|
* Patch by Paul Ruhland, 17 May 2004:
...
- Add support for the Logic Zoom LH7A40x based SDK board(s),
specifically the LPD7A400.
* Patches by Robert Schwebel, 15 May 2004:
- call MAC address reading code also for SMSC91C111;
- make SMSC91C111 timeout configurable, remove duplicate code
- fix get_timer() for PXA
- update doc/README.JFFS2
- use "bootfile" env variable also for jffs2
wdenk
committed
on 9 Jun 2004
|
Patch by Tolunay Orkun, 14 May 2004:
...
Add support for Cogent CSB472 board (8MB Flash Rev)
wdenk
committed
on 9 Jun 2004
|
Patch by Thomas Viehweger, 14 May 2004:
...
- flash.h: more flash types added
- immap_8260.h: some bits added (useful for RMII)
- cmd_coninfo.c: typo corrected, printf -> puts
- reduced size by replacing spaces with tab
wdenk
committed
on 9 Jun 2004
|
Patch by Robert Schwebel, 13 May 2004:
...
Add 'imgextract' command: extract one part of a multi file image.
wdenk
committed
on 9 Jun 2004
|
2004-06-08 |
Patches by Jon Loeliger, 11 May 2004:
...
(partially, as they contained a lot of crap)
wdenk
committed
on 8 Jun 2004
|
Patches Part 1 by Jon Loeliger, 11 May 2004:
...
Dynamically handle REV1 and REV2 MPC85xx parts.
(Jon Loeliger, 10-May-2004).
New consistent memory map and Local Access Window across MPC85xx line.
New CCSRBAR at 0xE000_0000 now.
Add RAPID I/O memory map.
New memory map in README.MPC85xxads
(Kumar Gala, 10-May-2004)
Better board and CPU identification on MPC85xx boards at boot.
(Jon Loeliger, 10-May-2004)
SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
(Jim Robertson, 10-May-2004)
Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
Supports multiple PHYs.
(Andy Fleming, 10-May-2004)
Some README.MPC85xxads updates.
(Kumar Gala, 10-May-2004)
Copyright updates for "Freescale"
(Andy Fleming, 10-May-2004)
wdenk
committed
on 8 Jun 2004
|
Patch by Stephen Williams, 11 May 2004:
...
Add flash support for ST M29W040B
Reduce JSE specific flash.c to remove dead code.
wdenk
committed
on 8 Jun 2004
|
Patch by Markus Pietrek, 04 May 2004:
...
Fix clear_bss code for ARM systems (all except s3c44b0 which
doesn't clear BSS at all?)
wdenk
committed
on 8 Jun 2004
|
2004-06-07 |
* Patch by Rishi Bhattacharya, 08 May 2004:
...
Add support for TI OMAP5912 OSK Board
* Patch by Sam Song May, 07 May 2004:
Fix typo of UPM table for rmu board
wdenk
committed
on 7 Jun 2004
|
Patch by Pantelis Antoniou, 5 May 2004:
...
- Intracom board update.
- Add Codec POST.
wdenk
committed
on 7 Jun 2004
|
2004-06-06 |
Add support for the second Ethernet interface for the 'PPChameleon' board.
wdenk
committed
on 6 Jun 2004
|
* Patch by Dave Peverley, 30 Apr 2004:
...
Add support for OMAP730 Perseus2 Development board
* Patch by Alan J. Luse, 29 Apr 2004:
Fix flash chip-select (OR0) option register setting on FADS boards.
* Patch by Alan J. Luse, 29 Apr 2004:
Report MII network speed and duplex setting properly when
auto-negotiate is not enabled.
* Patch by Jarrett Redd, 29 Apr 2004:
Fix hang on reset on Ocotea board due to flash in wrong mode.
wdenk
committed
on 6 Jun 2004
|
Patch by Dave Peverley, 29 Apr 2004:
...
add MAC address detection to smc91111 driver
wdenk
committed
on 6 Jun 2004
|
Patch by Tolunay Orkun, 20 Apr 2004:
...
- README update: add CONFIG_CSB272 and csb272_config
- add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
i2cfast environment variable
wdenk
committed
on 6 Jun 2004
|
Patch by Yuli Barcohen, 19 Apr 2004:
...
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
wdenk
committed
on 6 Jun 2004
|
2004-06-01 |
Fix text alignment
wdenk
committed
on 1 Jun 2004
|
Fix PCI support on CPC45 board
wdenk
committed
on 1 Jun 2004
|
2004-05-29 |
Fix CONFIG_ETH*ADDR for Ocotea board.
...
Sort Makefile.
Update docs.
wdenk
committed
on 29 May 2004
|
2004-05-19 |
Patch by Scott McNutt, 25 Apr 2004:
...
Add Nios GDB/JTAG Console support:
- Add stubs to support gdb via JTAG.
- Add support for console over JTAG.
- Minor cleanup.
wdenk
committed
on 19 May 2004
|
2004-05-13 |
Add support for CATcenter board (based on PPChameleon ME module)
wdenk
committed
on 13 May 2004
|