ARM OMAP phycard-a-l1: Add missing include ...

Fixes:

arch/arm/boards/phycard-a-l1/lowlevel.c: In function 'pcaal1_sdrc_init':
arch/arm/boards/phycard-a-l1/lowlevel.c:105:2: warning: implicit declaration of function 'get_ram_size' [-Wimplicit-function-declaration]
arch/arm/boards/phycard-a-l1/lowlevel.c:113:3: warning: implicit declaration of function 'hang' [-Wimplicit-function-declaration]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX21: Fix device names for gpio ...

The i.MX21 has a imx1 gpio type. Change the name accordingly, otherwise
the gpio driver does not probe successfully.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX35: Fix device names for gpio ...

The i.MX35 has a imx31 gpio type. Change the name accordingly, otherwise
the gpio driver does not probe successfully.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fix brown paper bag bug introduced with compile time loglevel ...

__dev_printf is a define which uses a local variable 'ret'. This
means that whenever someone does a dev_*(dev, "ret: %d\n", ret);
ret will be 0.

Fix this by writing this without a local variable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add warning above get_ram_size ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX28: change default watchdog reset method ...

The default setting for the imx28 watchdog is to do a power-off reset. If the
SoC is only powered via battery, then the watchdog powers the chip down, though.
According to the datasheet it should still be possible to execute a proper POR
with battery power, but testing showed otherwise.
When the watchdog power-off reset is disabled, a software reset is executed
instead. This works with and without battery power.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ArchosG9: solve regression in second stage lowlevel init ...

On ArchosG9 the second stage low-level init was the fallback default.
 Now that the low-level init is forcibly enabled it has to be skipped
 when already executed from first stage.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

oftree: fix probe support ...

in commit e118761c5f7e8
oftree command: refactor

the Kconfig CMD_OFTREE_PROBE was remove

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy/micrel: KSZ9021 diasable Asym Pause support ...

Due to a hw bug do not enable teh Asym_Pause.
Otherwise if you ser the bit 11 in 4h you will have to unplug
and replug the cable to make the phy work.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

macb: add cadence Gigabit GEM support ...

based on the kernel code
detect it via IP version

In the GEM we can use a full packet buffer for receive but the buffer size
need to be 64bit size aligned.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

macb: fix tx ring size ...

the mininal tx ring size is 2 as if one we wrap on the same descriptor
and can cause IP lock on GEM (gigabit version) this is always the case

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net macb: reset the IP at init ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net macb: enable Tramsmit and Receive at open ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net macb: use the macro as in linux for tx/rx buffer ring size ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net macb: sync remaining define with linux ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net macb: call macb_init at probe explicitly ...

as eth_device init is planning for remove and we need the init before register
the mdio bus

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sama5de3k: add gmacb support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mmu: Clear unpredictable bits for translation table ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: rename reset and common_reset to barebox_arm_reset_vector and arm_cpu_lowlevel_init ...

reset is confusing with the cpu reset and impossible to grep

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

macb: drop non used define ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

macb: report timeout on send ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

macb: use dev_xx message ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

beagle: add nand partition and boot ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9: drop AT91_BASE_SYS for sdram controller ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam926x_lowlevel_init: use struct to pass soc config ...

this will allow to pass more paraemeter to at91sam926x_lowlevel_init
and drop AT91_BASE_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam926x_lowlevel_init: use pio macro ...

this will make the code more readble

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: gpio: split accessor so we can use them for early init ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: fix IMAGE_COMPRESSION_LZO-enabled build on MIPS ...

Here's the error message:

  LD      arch/mips/pbl/zbarebox
pbl/built-in-pbl.o: In function `decompress_unlzo':
/home/antony/barebox.git.rebased.isp/pbl/decomp.c:35: undefined reference to `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6d0): relocation truncated to fit: R_MIPS_26 against `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6e0): undefined reference to `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6e0): relocation truncated to fit: R_MIPS_26 against `free'
make[1]: *** [arch/mips/pbl/zbarebox] Error 1
make: *** [zbarebox.bin] Error 2

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: pbl: fix none compression support ...

Here's the error message:

  AS      arch/mips/pbl/piggy.shipped.o
  arch/mips/pbl/piggy.shipped.S: Assembler messages:
  arch/mips/pbl/piggy.shipped.S:1: Error: unrecognized opcode `globl input_data'
  make[1]: *** [arch/mips/pbl/piggy.shipped.o] Error 1
  make: *** [zbarebox.bin] Error 2

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/arm-entry'