LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2020-04-01	328dfaa Browse files » mfd: rave-sp: Fix rave_sp_emulated_get_status() ... Original code in rave_sp_emulated_get_status() got the meaning of RAVE_SP_STATUS_GS_FIRMWARE_MODE wrong. Invert it to correctly detect if RAVE SP device is in bootloader mode or not. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 31 Mar 2020 Sascha Hauer committed on 1 Apr 2020
	c3bc808 Browse files » net: phy: Add missing inline to function ... Add missing inline to static inline no-op wrapper function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Apr 2020
	00b5795 Browse files » regulator: void function returns void ... Do not return a value from a function returning void. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Apr 2020
2020-03-23	6c42b62 Browse files » reset: remove duplicate imx8mq-reset.h and use correct defines ... The defines in the Barebox copy of imx8mq-reset.h had a typo, which has been fixed in the upstream Linux version of this file. So depending on include ordering the reset driver using those defines would fail to compile. Use the typo fixed versions of the define in the driver and remove the duplicate include file, as we also have the proper upstream version now. Reported-by: Giorgio Dal Molin <giorgio.nicole@arcor.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 20 Mar 2020 Sascha Hauer committed on 23 Mar 2020
2020-03-18	ce70a15 Browse files » crypto: pbkdf2: Select HMAC ... pbkdf2 needs HMAC support, select it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	1e23cf5 Browse files » Merge branch 'for-next/stm32' Sascha Hauer committed on 18 Mar 2020
	8c02f14 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 18 Mar 2020
	52ef524 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 18 Mar 2020
	fcad6e3 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 18 Mar 2020
	394b88e Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 18 Mar 2020
	2987a00 Browse files » Merge branch 'for-next/clk' Sascha Hauer committed on 18 Mar 2020
	ec91b38 Browse files » Merge branch 'for-next/block' Sascha Hauer committed on 18 Mar 2020
	822768c Browse files » Merge branch 'for-next/at91' Sascha Hauer committed on 18 Mar 2020
	cfca623 Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 18 Mar 2020
	0ecd879 Browse files » dts: update to v5.6-rc6 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	65984ba Browse files » dts: update to v5.6-rc5 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	3cc8238 Browse files » dts: update to v5.6-rc4 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	2d4582e Browse files » dts: update to v5.6-rc3 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	c1aa78f Browse files » dts: update to v5.6-rc2 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	v2020.03.0 616091a Browse files » Release v2020.03.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Mar 2020
	34201fc Browse files » ARM: at91: add sama5d27-based Groboards Giant Board support ... The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC. The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the SiP as well as a MicroSD slot on the PCB. barebox doesn't yet support the sama5d2 SDHCI-variant, so board support is limited to toggling the LED and interfacing with the UART, but add this now till the rest may follow. Device tree is based on the vendor's device-tree available at https://github.com/Groboards/giantboard-tools Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
	829bbd3 Browse files » ARM: at91: sama5d27-som1: branch to noinline function after stack setup ... We need to branch out as soon as possible after setting up the stack. Do this and thereby avoid an access violation we now run into using OSELAS.Toolchain-2019.09.1. Fixes: 8bfb1852cf6a ("ARM: at91: add basic sama5d2-som1-ek1 support") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
	f5ac186 Browse files » ARM: at91: sama5d27-som1: clean up lowlevel.c ... In ARM, stack decrements before storing values, so decrementing a number from the stack base is unnecessary. Existing instances of this were removed in 6b3dc4abd8 ("ARM: Cleanup stack offset cargo cult"), but the sama5d27-som1 board was added later than that. Fix the cargo cult here as well and while at it, turn a macro that doesn't need to be one into a static inline function. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
	fd5b602 Browse files » ARM: at91: add support for SAM9 SoC reset ... System reset wasn't supported on the sama5 so far. Add a driver to remedy this. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
2020-03-16	e6e12e9 Browse files » ARM: phytec-som-imx6: Add imx6dl with 512mb RAM ... This patch adds support for a phyCORE-i.MX 6Solo/DualLight variant with 512mb RAM. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmüller <s.riedmueller@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 11 Mar 2020 Sascha Hauer committed on 16 Mar 2020
2020-03-16	18a3a7a Browse files » pinctrl-single: fix parsing of `pinctrl-single,bits` property ... According to dts/Bindings/pinctrl/pinctrl-single.txt:113 the correct order of parameters is <offset, value, mask>. Fixes: f7e0cae43 ('pinctrl-single: Handle "pinctrl-single,function-mask" dt property') Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Mamonov authored on 12 Mar 2020 Sascha Hauer committed on 16 Mar 2020
2020-03-11	544bd2f Browse files » kbuild: replace barebox-all with BAREBOX_OBJS ... Replace $(barebox-all) with $(BAREBOX_OBJS), then delete barebox-all. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 10 Mar 2020 Sascha Hauer committed on 11 Mar 2020
	4d05754 Browse files » kbuild: rename barebox-{common, lds} to BAREBOX_{OBJS, LDS} ... The previous commit renamed barebox-pbl-common because you cannot export a variable that contain hyphens. These variables are not exported for now. I am just renaming them for consistency. barebox-common -> BAREBOX_OBJS barebox-lds -> BAREBOX_LDS If barebox moves the link rules into scripts/link-barebox.sh like Linux did, these two must be exported anyway. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 10 Mar 2020 Sascha Hauer committed on 11 Mar 2020
	739a49a Browse files » kbuild: rename barebox-pbl-common to BAREBOX_PBL_OBJS ... 'export barebox-pbl-common' does not work reliably because hyphens are disallowed in shell variables. This caused a problem in Linux in the past. See Linux commit 2bfbe7881ee0 ("kbuild: Do not use hyphen in exported variable name"). The same problem occurs when you build barebox with O= and the directory path to the source tree contains a shell special character like '~'. The maintainer of GNU Make stated that there is no consistent way to export variables that do not meet the shell's naming criteria. (https://savannah.gnu.org/bugs/?55719) Consequently, you cannot use hyphens in exported variables. Rename barebox-pbl-common to BAREBOX_PBL_OBJS. I named it after KBUILD_VMLINUX_OBJS in the Linux top Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 10 Mar 2020 Sascha Hauer committed on 11 Mar 2020
	9e4fc45 Browse files » kbuild: remove dead code for modpost ... rule_barebox-modpost is dead code since it is not invoked by anyone. $(call barebox-modpost) is dead code too since there is no variable named 'barebox-modpost'. We could fix it to $(call rule_barebox-modpost) to invoke the rules, but I hesitate to enable the code that has never been tested. barebox-init, barebox-main are not set by anyone, so this code does not seem to work. The code is completely out of sync from the upstream Linux, so there is no good reason to keep this rotten code. If barebox needs modpost, this should be re-implemented correctly. (preferably, by re-syncing with the latest Linux) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 10 Mar 2020 Sascha Hauer committed on 11 Mar 2020