Merge branch 'for-next/ratp'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

Merge branch 'for-next/arm-1'

Merge branch 'for-next/arm'

of: Make locally used function static ...

__of_unflatten_dtb is only locally used and has no prototype in
include/. Make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Make locally used function static ...

of_property_get_value is only locally used and has no prototype in
include/. Make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: spi-nor: add support for w25q16dw ...

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: fix probe with fixed-link ...

While cpsw is probe dt, it accepts only slaves nodes with "phy_id" property.
In case of fixed-link there are no "phy_id" property and probe would be failed.
This patch avoid the failure due to missing "phy_id" in case of fixed-link.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.03.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: ath79: fix different typos ...

the CONFIG typos was not real issue.
The defconfig typo i detected only after clean compile.
I hope we can migrate barebox MIPS to multiimage soon.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.16-rc2 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.16-rc1 ...

Also includeded:

ARM: dts: am33xx: do not delete no longer existing clocks

Several clocks are removed from the am33xx dts files with v4.16-rc1.
Remove the corresponding /delete-node/ directives aswell to avoid
dtc breakage.

Also included:

ARM: dts: imx6qdl: SolidRun: Fix upstream include

Upstream dts file way renamed, so change include name accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: ARM64 doen't provide the armlinux_ functions ...

Those set parameters specific to the older ARM Linux implementation.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: crypto: initialize digests earlier ...

We moved the digest init functions to coredevice_initcall level. Do
the same with the ARM specific digests aswell so that they are available
at the same time.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dts: enable heartbeat led for ar9331-dptechnics-dpt-module ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add reference to libratp-barebox in the remote-control docs ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new reset command ...

E.g.:
    $ ./bbremote -v --port /dev/ttyUSB2 reset

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new md and mw commands ...

This commit introduces support for running the md and mw commands
using the binary interface provided by RATP. This allows clients to
read and write memory files without needing to do custom string
parsing on the data returned by the console 'md' and 'mw' operations.

The request and response messages used for these new operations are
structured in the same way:

 * An initial fixed-sized section includes the fixed-sized
   variables (e.g. integers), as well as the size and offset of the
   variable-length variables.

 * After the initial fixed-sized section, the buffer is given, which
   contains the variable-length variables in the offsets previously
   defined and with the size previously defined.

The message also defines separately the offset of the buffer
w.r.t. the start of the message. The endpoint reading the message will
use this information to decide where the buffer starts. This allows to
extend the message format in the future without needing to break the
message API, as new fields can be appended to the fixed-sized section
as long as the buffer offset is also updated to report the new
position of the buffer.

E.g.:
    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0102030405
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0102030405

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0000000000
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: use xstrndup() instead of a custom xmemdup_add_zero() ...

The console operations done via RATP expect strings, so just use
xstrndup() instead of defining a custom method.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement getenv as a standard ratp command ...

Also, use xstrndup() instead of the custom xmemdup_add_zero() as we're
working with strings anyway.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement ping as a standard ratp command ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: allow building without full console support ...

Make CONFIG_RATP a selectable config option, so that the user can
enable RATP support without explicitly needing to enable the full
console support over RATP (e.g. only for RATP FS or built-in command
support).

The full console can still be explicitly enabled with
CONFIG_CONSOLE_RATP.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: moved logic to its own subdirectory ...

We are going to add new RATP command implementations in separate files
within this subdirectory.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement generic command support ...

The RATP implementation now allows executing generic commands with a
binary interface: binary requests are received and binary responses
are returned.

Each command can define its own RATP request contents (e.g. to specify
command-specific options) as well as its own RATP response contents
(if any data is to be returned).

Each command is associated with a pair of numeric unique request and
response IDs, and for easy reference these IDs are maintained in the
common ratp_bb header. Modules may override generic implemented
commands or include their own new ones (as long as the numeric IDs
introduced are unique).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.15-rc9 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>