Merge branch 'for-next/kconfig'

Merge branch 'for-next/kbuild'

Merge branch 'for-next/dts'

Merge branch 'for-next/cpsw'

Merge branch 'for-next/compile-test'

Release v2020.05.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: resync top Makefile, mkmakefile, tags.sh with Linux 5.7-rc4 ...

The prologue of the build system is not specific to Linux or Barebox.
Paritially resync with Linux 5.7-rc4

- In Linux, $(objtree) is always '.', and $(srctree) might be relative.
  I am keeping both absolute for now to avoid unexpected breakage.

- I did not resync single target for now. We need to touch
  Makefile.build a lot if we want to resync it.

- 'export CDPATH=' is Barebox-only code, which was added by
  commit 6cc8d0544658 ("Makefile: disable CDPATH"). Keep it.

- KBUILD_SRC no longer exists in the upstream Linux. I replaced it
  with building_out_of_srctree.

- scripts/mkmakefile does not contain anything specific to Linux or
  Barebox. Resync it with Linux 5.7-rc4

- scripts/tags was imported from Linux 3.6 with some cherry-picks on
  top of that. Resync it with Linux 5.7-rc4

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch: remove KBUILD_SRC checks from arch Makefile ...

You can always add $(srctree)/ to the mach include path.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: add -Wall to KBUILD_HOSTCXXFLAGS ...

[ Linux commit 735aab1 ]

Add -Wall to catch more warnings for C++ host programs.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: add -Werror={strict-prototypes, implicit-int} to KBUILD_CFLAGS ...

- Turn Wstrict-prototypes into an error
- Add -Werror=implicit-int
- Use the standard form -Werror=... for implicit-function-declaration

This commit imports the following Linux commits. They should work for
barebox too.

80970472179a Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
eeb5687a7139 kbuild: add -Werror=strict-prototypes flag unconditionally
61a0902a06d6 kbuild: add -Werror=implicit-int flag unconditionally
b89f25ea7892 kbuild: use -Werror=implicit-... instead of -Werror-implicit-...

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: add COMPILE_TEST prompts for some off-by-default options ...

Some Kconfig options we have are promptless and off-by-default and
instead can only be enabled by being selected from platform options.

For some of those that aren't compile testable, add a new
COMPILE_TEST-only prompt.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: add COMPILE_TEST prompts to some on-by-default drivers ...

Many clock source and GPIO controller drivers don't have a prompt, but
are instead default y if their respective platform is enabled. Maintain
this behavior, but add a prompt for when COMPILE_TEST is enabled, so
they can be included in test builds.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: mark first batch of compilable drivers for COMPILE_TEST ...

All of these drivers have a runtime dependency on SoC peripherals, but
can nevertheless be compile-tested. Add COMPILE_TEST as an alternate
dependency.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: introduce COMPILE_TEST option for build-testing ...

Compile-time analysis may help us catch latent bugs in barebox. For this
to be most effective, we need an easy way to compile as much of barebox
as possible. Giving all driver options prompts would do this, but at the
cost of making user experience worse, by asking them about drivers for HW
that's clearly not relevant to the platform they selected.

Do as Linux does and provide a default-off COMPILE_TEST option, which we
can use to make extra drivers selectable.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: explicitly select dependency STMP_DEVICE for i.MX23/28 drivers ...

Some of the i.MXs drivers can be build tested even if building for other
platforms. Support adding a future COMPILE_TEST dependency to some of
these drivers by explicitly having their Kconfig symbol select STMP_DEVICE
if the driver calls stmp_reset_block.

This has not been necessary for the normal build, because the ARCH
symbols for the IMX23 and IMX28 already selected STMP_DEVICE.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: Move mci platform data to include/ ...

To be able to add the Atmel mci driver to COMPILE_TEST move the
definition of struct atmel_mci_platform_data to include/ where it
can be reached from foreign SoCs as well.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.7-rc4 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Fix inode size setting in ftruncate ...

When changing a file size the size of the corresponding inode has to be
changed as well.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: make cpsw_send directional ...

For dual_emac mode, the driver needs to send on the individual
ports. We set the directional bits on each packet so the controller
knows where to send its.

From TI am335x Reference Manual:

14.3.2.10.2 Dual Mac Mode

- Packets from the host (port 0) to ports 1 and 2 should be directed.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: add vlan handling for dual_emac mode ...

From TI am335x Reference Manual:

14.3.2.10.2 Dual Mac Mode

When operating in dual mac mode the intention is to transfer packets
between ports 0 and 1 and ports 0 and 2, but not between ports 1 and 2.

Each CPGMAC_SL appears as a single MAC with no bridging between MAC’s.
Each CPGMAC_SL has at least one unique (not the same) mac address.

Dual mac mode is configured as described below:

- Set the ale_vlan_aware bit in the ALE_Control register. This bit
configures the ALE to process in vlan aware mode.

With X can be Port 1 or Port 2:

- Configure the Port X to Port 0 VLAN.
Add a VLAN Table Entry with ports 0 and X as members (clear the flood
masks).

Add a VLAN/Unicast Address Table Entry with the PortX/0 VLAN and
a port number of 0.

- Select the dual mac mode on the port 0 FIFO by setting
tx_in_sel[1:0] = 01 in P0_Tx_In_Ctl.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: cpsw_process should only handle rx channels for its own port ...

The driver is currently processing the whole channel list, so it is
possible that it handles a channel of the wrong interface. We limit the
rx_chan handling for its desired port.

The cpsw_send is removing finished tx_chan transfers on each send, so this
has no directional limitation.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: move generic setup code to probe ...

All generic cpsw code can move to probe, so the controller is only reset
and configured once.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: fix cpsw_slave_regs register offsets ...

The cpsw_slave_regs struct also start with max_blks register, so here we
also have to skip the first two bytes like for .host_port_reg_ofs

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: sync scripts/Kbuild.include with Linux 5.7-rc2 ...

More random cherry-picks for scripts/Kbuild.include

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: sync if_changed and friends with Linux 5.7-rc2 ...

Resync cmd, if_change, if_changed_dep, and if_changed_rule.

Clean up the users of if_changed_rule.

I deleted the modversions rule. It is dead code because barebox
does not define CONFIG_MODVERSIONS. It does not work without
scripts/genksyms/ anyway.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: sync filechk rule with Linux 5.7-rc2 ...

The 'filechk' in the latest Linux works more simply, reliably.

- Do not show CHK every time
- Delete the *.tmp file when the filechk_$(1) fails
- Do not open the first prerequisite. This is unneeded in most cases.

I deleted pointeless dependency on Makefile.

Also delete the meaningless assignment to 'targets' because filechk
does not generate .cmd file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: do not delete $@ explicitly on failure ...

The .DELETE_ON_ERROR special target is specified in scripts/Kbuild.include

You do not need to delete $@ explicitly when the command fails.
GNU Make automatically does it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove unused board/debug_ll.h ...

There is no way to include <board/debug_ll.h>. These three files
are dead code.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove unused INCDIR and BOARD variables in Makefile ...

The variable INCDIR is not used by anyone.

The variable BOARD is not set by anyone, so $(BOARD) is always empty.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.7-rc3 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>