Merge with /home/stefan/git/u-boot/denx

Merge with /home/sr/git/u-boot/denx

Updates for TQM5200 modules: ...

- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions

[PATCH] PPC4xx start.S: Fix for processor errata ...

Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.

Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>

[PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH ...

Signed-off-by: Stefan Roese <sr@denx.de>

Update CHANGELOG

Merge with /home/sr/git/u-boot/cfi-update

[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] ...

* Adds support for AMD command set Top Boot flash geometry reversal
   * Adds support for reading JEDEC Manufacturer ID and Device ID
   * Adds support for displaying command set, manufacturer id and
     device ids (flinfo)
   * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
   * Removes outdated change history (refer to git log instead)

Signed-off-by: Tolunay Orkun <listmember@orkun.us>
Signed-off-by: Stefan Roese <sr@denx.de>

Update CHANGELOG

Merge with /home/tur/proj/v38b/u-boot

Disable the watchdog in the default config for the V38B board.

Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin ...

group is enabled for USB earlier (in cpu_init_f() instead of
usb_lowlevel_init()).

Merge with /home/stefan/git/u-boot/denx

Sequential accesses to non-existent memory must be synchronized, ...

at least on G2 cores.

This fixes get_ram_size() problems on MPC5200 Rev. B boards.

Merge with /home/tur/proj/uboot_linux_v38b/u-boot

Release U-Boot 1.1.6

Finish up support for MarelV38B board ...

- add watchdog support
 - enable GPIO_WKUP_7 pin for input
 - code cleanup

- Fix issues related to the use of ELDK 4 when compiling for MarelV38B: ...

* remove warnings when compiling ethaddr.c
      * adjust linker script (fixes a crash resulting from incorrect
      definition of __u_boot_cmd_start)
- Some MarelV38B code cleanup.

- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the ...

MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
  Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
  MPC5XXX_WU_GPIO_DATA_O for affected boards.

- Add defintions for some MPC5XXX GPIO pins.

Changed MarelV38B board make target to lowercase. Config file cleanup.

Merge with /home/sr/git/u-boot/nand-ladis

Automatically adjust ARFLAGS so "make -s" is really silent.

[PATCH] omap925.c: Remove unused functions ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

[PATCH] Add some missing machtypes for netstar & voiceblue boards ...

Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
numbers in code.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

[PATCH] NAND: Partition name support added to NAND subsystem ...

chpart, nboot and NAND subsystem related commands now accept also partition
name to specify offset.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

Update CHANGELOG.

Enable commandline editing and hush shell on all TQM boards.

README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE

Check for illegal character '=' in environment variable names. ...

Make sure the string passed as variable name does not contain a '='
character. This not only prevents the common error or typing
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
also closes a backdoor which allowed to delete write-protected
environment variables, for example by using "setenv ethaddr=".

Minor code cleanup.