LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2009-05-18	4a77037 Browse files » [miiphy] add feature to force link present ... If a NIC's MII isn't connected to a PHY but directly to a switch port, the switch doesn't sent a link signal to the NIC. (Because strictly speaking, there isn't any ethernet link at all.) This patch adds a force link feature to the phy, to cope with this situation. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 May 2009
	26a8987 Browse files » [macb] add MII flag, improve code readability ... This patch adds the flag "AT91SAM_ETHER_MII" along to the existing "AT91SAM_ETHER_RMII". This improves code readability in baords which are using plain MII mode. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 May 2009
	dfc1d8e Browse files » [macb] clear RMII bit when using plain MII ... When operating in plain MII mode, the driver assumes the RMII bit not set. Although this is the power on reset value, clearing this bit helps when playing with different network setups. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 May 2009
	f75a8a6 Browse files » [cfi] add autoprobing, use cfi size for flash chips size ... If a flash chip has been added with the size of "0" the cfi's size is used for the flash chip. Signed-off-by: Karsten Schwinne <kartsten.schwinne@de.bucurus.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Karsten Schwinne authored on 18 May 2009 Marc Kleine-Budde committed on 18 May 2009
	c2c1f2f Browse files » [at91] add gpio support for at91sam9263 ... Signed-off-by: Karsten Schwinne <kartsten.schwinne@de.bucurus.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Karsten Schwinne authored on 18 May 2009 Marc Kleine-Budde committed on 18 May 2009
	59bad04 Browse files » [pm9263] fix update_root script ... use correct image ("jffs2") to flash root Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 May 2009
	a737211 Browse files » mDDR drive strength v2 ... workarount for drive strength issue v2: optimized settings after temperature tests Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 18 May 2009 Sascha Hauer committed on 18 May 2009
	252f3ba Browse files » imx serial driver: add input frequency change support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2009
	e536d48 Browse files » simple console: implement console_flush ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2009
	b8a165d Browse files » pcm038: pll work ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2009
2009-05-13	2877007 Browse files » pcm038: initialize PLLs in one step ... We used to initialize the PLLs on PCM038 in two steps. The first was to initialize a basic setup so that all peripheral clocks run at their final speed and the second step was to push the processor to full speed after the PMIC has been initialized for the higher voltage. Do this in one step instead to get an easier setup. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	c651bda Browse files » pca100: update defconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	e5d7e49 Browse files » pcm038: update defconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	49321a5 Browse files » console: buffer characters before console is initialized ... instead of throwing all output away when the console is not initialized, buffer it in a kfifo and print it later when the first console gets initialized. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	2e8254e Browse files » console: rename console_buffer to console_input_buffer ... ...as we want to add an output buffer, too Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	a3c3f66 Browse files » imx clocksource: add frequency change support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	06a20b3 Browse files » Add notifier framework ... This is loosely based on the Linux notifier framework, but stripped down to the bare minimum. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	1ecc871 Browse files » imx_spi: make locally used function static ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
	6082401 Browse files » nand_imx: implement proper timeout in wait_op_done ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 May 2009
2009-04-28	0202bdc Browse files » MX21ads: Add cs8900 support (got lost in last commit) ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2009
	13c5d46 Browse files » cs8900: Whitespace changes, replace __FUNCTION__ with __func__ ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2009
	3f322b2 Browse files » u-boot-v2: Support CS8900A on MX21ADS ... Support the on-board CS8900A ethernet controller of the MX21ADS development board. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Ivo Clarysse authored on 27 Apr 2009 Sascha Hauer committed on 28 Apr 2009
	85d0c46 Browse files » u-boot-v2: CS89x0 ethernet support ... Support for CS89X0 ethernet controllers. Tested with CS8900A ref. F on MX21ADS. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Ivo Clarysse authored on 27 Apr 2009 Sascha Hauer committed on 28 Apr 2009
2009-04-21	a3f20a4 Browse files » Arm: remove -msoft-float option ... This breaks compilation on a hardfloat toolchain as we would need AFLAGS += -msoft-float aswell. Since we do not use floating point we can equally well remove the option completely. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 Apr 2009
2009-04-20	9665fd1 Browse files » pcm043: enable FEC driver in default config ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Apr 2009
2009-04-15	bb10e16 Browse files » u-boot v2 IMX NAND fix for i.MX21 ... Without the patch below, the result of the second READID will not match that of the first READID, yielding nand_get_flash_type: second ID read did not match ec,36 against a5,bd instead of NAND device: Manufacturer ID: 0xec, Chip ID: 0x36 (Samsung NAND 64MiB 1,8V 8-bit) Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Ivo Clarysse authored on 15 Apr 2009 Sascha Hauer committed on 15 Apr 2009
2009-04-14	4a6369b Browse files » add pca100 defconfig file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Apr 2009
	82a4cf2 Browse files » pcm038: Fix PLL settings ... We had some imx27 modules not starting through u-boot. The patch adds some delay between switching the powerlevel up and changing the pll settings. Please add the patch to the next release. Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 14 Apr 2009 Sascha Hauer committed on 14 Apr 2009
	dcb35fb Browse files » imx nand: Add debug command ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Apr 2009
	0bf132f Browse files » imx nand: Use correct bad block position ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Apr 2009