LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2010-11-17	4d63d07 Browse files » Merge branch 'for-mainline-doc' of git://git.pengutronix.de/git/rsc/barebox into next Sascha Hauer committed on 17 Nov 2010
2010-11-17	8ef2947 Browse files » Remove m68k support ... The m68k support is compile broken for a long time now and nobody cared so far. We cannot keep the architecture uptodate with current development wihtout being able to compile it. It's still in the archives and can be re-added anytime once somebody cares for. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Nov 2010
2010-11-15	33e3dc3 Browse files » pcm037: Enable nand driver in defaultconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Nov 2010
	2e75410 Browse files » pcm037: set nand_device in default environment ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Nov 2010
	4ce5028 Browse files » doc: put barebox version into documentation ... Currently the documentation does always claim to be version 1. We add the revision plus the git version to the manual. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Robert Schwebel committed on 15 Nov 2010
	507480d Browse files » doc: add missing commands ... This patch adds command entries for all commands available in barebox. However, as there is no documentation for all of these commands, 'make docs' will now spit out warnings. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Robert Schwebel committed on 15 Nov 2010
	944ab68 Browse files » doc: sort list alphabetically ... Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Robert Schwebel committed on 15 Nov 2010
	b960023 Browse files » pcm037: Fix compilation warning. ... This patch fix following compilation warning: ../devices-imx31.h: In function 'imx31_add_fb': ../devices-imx31.h:34: warning: passing argument 2 of 'imx_add_ipufb' from incompatible pointer type Signed-off-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Belisko authored on 12 Nov 2010 Sascha Hauer committed on 15 Nov 2010
2010-11-12	a3da178 Browse files » Merge branch 'master' into next Sascha Hauer committed on 12 Nov 2010
	f99b1d3 Browse files » ARM i.MX51: Add nand device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	ce15c02 Browse files » imx nand: Add v3 (i.MX51) support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	691bff0 Browse files » imx nand: introduce overwritable check_int function ... needed for v3 support later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	5fcca46 Browse files » imx nand: move initialization to preset function ... This has two purposes. First we need to factor out initialization to be able to do something different on v3 type controllers, second with this patch we are independent of preinitialized register values. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	da1ad19 Browse files » mxc_nand: fix correct_data function ... The v2 controller has a totally different mechanism to check whether the data we read had ecc errors or not. Implement this. The mechanism in the v2 controller happens to be identical to the v3 controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	87ccd2d Browse files » imx nand: add V1_V2 namespace to registers ... This prepares the driver for v3 support. The v3 controller has a completely different register layout, so add a V1_V2_ namespace to the register defines to avoid confusion with the v3 regs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	22180f9 Browse files » imx nand: do not read-modify-write SPAS register ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	a0fc525 Browse files » imx_nand: make some internally used functions overwriteable ... This patch prepares the driver to add v3 controller support later. The v3 controller is basically the same controller as v1 and v2, but with a completely different register layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	2cb2a68 Browse files » imx nand: remove unnecessary register write ... NFC_SP_EN is cleared in probe and never set again, so we do not need to clear it in other functions again. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	bb81ff7 Browse files » imx_nand: rework get_dev_status ... We save/restore the value in the buffer anyway, so it makes no difference whether we use main_area0 or main_area1. So, we can use main_area0 and remove main_area1 from the driver which is otherwise unused. Also, clean up the comments in get_dev_status. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	dd62a0c Browse files » imx_nand: remove 0xe00 offset from registers ... Add the offset to the register base instead. This is done in preparation for v3 controller support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	31ecd16 Browse files » NAND: reset chips before usage like the kernel does ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
	f38bfd2 Browse files » fb: set id for framebuffer device correctly ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2010
2010-11-11	b35fbfc Browse files » at91: add Ronetix pm9g45 support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ilko Iliev <iliev@ronetix.at> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Nov 2010
	6b503c2 Browse files » at91: Support for at91sam9g10: core chip & board support ... Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Nov 2010
	ba685b2 Browse files » at91sam9260/at91sam9263: use the same id as in the kernel for the uart devices ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Nov 2010
	ae19fe2 Browse files » at91: Support for at91sam9g45 and at91sam9m10 series: core chip & board support ... Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9M10G45-EK. In the future, we will add the m10 and other boards revisions Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Nov 2010
2010-11-10	7a5cb50 Browse files » at91: add Ronetix pm9261 board support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ilko Iliev <iliev@ronetix.at> Jean-Christophe PLAGNIOL-VILLARD committed on 10 Nov 2010
	d923f0d Browse files » at91: Introduction of at91sam9261 SOC. ... AT91sam9261 series is an ARM 926ej-s SOC family clocked at 190/100MHz. The first board that embeds at91sam9261 chip is the AT91SAM9261-EK. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Jean-Christophe PLAGNIOL-VILLARD committed on 10 Nov 2010
	6a84a01 Browse files » i.MX device macros: Fix typo ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Nov 2010
2010-11-04	85b3963 Browse files » Add basic support for mini2440 dev board. ... This work is mainly based on a9m2440 board implementation from Juergen Beisert <jbe@pengutronix.de>. Functionality was tested only running barebox from ram. Loading to flash and booting will not work because missing lowlevel_init functionality (lack of jtag debugger on my side ;)). Signed-off-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Belisko authored on 19 Oct 2010 Sascha Hauer committed on 4 Nov 2010