enable LFS support for host programs ...

This fixes building on an XFS partition on a 32 bit machine:

	$ armmake -C ~/gsrc/barebox O=$PWD imx_defconfig
	  HOSTCC  scripts/basic/fixdep
	fixdep: error fstat'ing depfile: scripts/basic/.fixdep.d: Value too large for defined data type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Make locally used function canonicalize_dir() static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lib/fonts: add 6x8 font ...

This font is derived from linux lib/fonts/font_6x10.c.

Signed-off-by: Sven Schneider <s.schneider@arkona-technologies.de>
[rhi: fix indentation for block /* 36 0x28 '$' */]
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: spi-nor: sync definition of Spansion chips from Linux ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_device_is_stdout_path: split off options and support aliases ...

Several device trees use something like:

	stdout-path = "serial0:115200n8";

Currently of_device_is_stdout_path fails to do the right thing here
because it expects an absolute node path and no options. So split off
options (everything after the colon) and resolve aliases.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_device_is_stdout_path: simplify ...

Test for dev->device_node being NULL earlier which at the end of the
function allows to simplify the calculation of the return value

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: emit an error message if getting the clock fails ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: mvebu: terminate error message with a newline ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/misd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/gpio'

Merge branch 'for-next/dts'

Merge branch 'for-next/directory-links'

Merge branch 'for-next/arm'

Revert "nv: Do not create globalvars from nvvars" ...

This reverts commit 35d8e85.

Revert "globalvar: remove code for unqualified globalvars" ...

This reverts commit e4f8105.

Revert "globalvar: make globalvar functions more consistent" ...

This reverts commit 1b4a05c.

Revert "param: remove unnecessary device_d * argument" ...

This reverts commit 0071bac.

Revert "globalvar: don't use nv_device if CONFIG_NVVAR is disabled" ...

This reverts commit b378e8c.

Revert "globalvar: make nv_device static" ...

This reverts commit f655902.

Revert "nv: Fix setting of nv.dev.<devname>.<param> variables" ...

This reverts commit eaf884b.

Revert "globalvar: Fix value of new globalvar when nvvar exists" ...

This reverts commit f8a1774.

Release v2017.06.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Wandboard: add Documentation ...

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Wandboard: enable Wandboard Quad ...

Extend the DT compatibility check to actually use the Wandboard Quad.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Wandboard Quad: fix PBL UART MUX ...

Three variants of the Wandboard exist: WBSOLO, WBDUAL and WBQUAD.
For all variants, the external serial port is connected to UART1 via
PAD_CSI0_DATA10 (TX) and PAD_CSI0_DATA11 (RX). Unfortunately, the IOMUX
register adresses for this mux differ between i.MX6Q (WBQUAD) and others.
Make the UART IOMUX for PBL compatible for WBQUAD.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Wandboard: dont do MMDC Write Leveling Calibration ...

The hardware requirements to perform a write leveling calibration are
not fulfilled by the Wandboard modules.
IMX6DQRM §44.11.6 "Write leveling Calibration" Note2 states that the first
bit of each data byte group (D0, D8, ..., D56) from memory must be connected
to the same data bus bit on the controller, which is not given on the
Wandboard modules, resulting in unpredictable calib results and breaking the
WBQUAD 2GiB SDRAM setup. Similar restrictions exist for the i.MX6SD.

Remove this calibration and use the MPWLDECTRL defaults.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>