Makefile.lib: add rule to built Tegra BCTs ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: cbootimage: remove noisy output ...

Our build is quiet by default, so don't allow cbootimage
to spam our logs.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: tegra: import cbootimage ...

Needed to built the BCTs and bootable images.

Version 1.2 from https://github.com/NVIDIA/cbootimage.git

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: tegra30: parse drive groups ...

These are special groups to configure pad properties
such as drive strength and slew rate for a group of
pads.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: tegra: don't set 8bit mode unconditionally ...

Those flags should be set from the DT parsing code.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: tegra: apply pad autocalibration on T30 ...

Needed for SD cards connected to sdmmc1 or sdmmc3
to work properly.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: tegra: beaver: adjust pinmux to make sdmmc1 work ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: tegra: beaver: activate sdmmc1 voltage rail ...

In order to get the SD card solt working.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: add Tegra driver ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: tegra20: register i2c clocks ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: tegra30: register i2c clocks ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: tegra: allow to register clocks with 16 bit divider ...

Some peripherals have a double wide divider in front
of them.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: tegra: remove device reset hack ...

Now that we have a proper reset controller, it
isn't necessary anymore to keep the device reset
hack coupled to the clock.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: tegra: add reset control ...

Enable the driver to reset the device itself.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: tegra: reset UARTS from clock controller ...

The console devices are the only ones that can't
use the reset controller properly, as they get
registered from platform code. Reset those devices
from the clock controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: add tegra reset controller ...

Allows us to drop the hack in the clock controller
and implement proper reset at device level.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: lowlevel: add function to fetch chipid ...

This is needed as a safe way to flush the ABP bus.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset: add reset controller framework ...

Add stripped sown version of the reset controller
framework from the Linux kernel.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AM33xx: make bbu handler static inline ...

The static inline wrapper for am33xx_bbu_spi_nor_mlo_register_handler
lacked the 'static inline'. add it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: radxa-rock: set hostname after devicetree initialization ...

hostname_init() must be called after the devicetree root node has been
initialized, otherwise the check on board compatible always returns
false.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver/net: fix bus endianess access in ethoc.c ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

asm-generic: add IO memory accessors ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: fix macro WARN ...

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drop CONFIG_PARTITION_NEED_MTD ...

With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:

| commit b32cd8d
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Wed Apr 9 15:49:32 2014 +0200
|
|     mtd: nand: bb: use mtd api directly
|
|     The devfs layer just adds an addition indirection between mtd
|     and the bb devices with no purpose. Drop it.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: iterate over directories in alphabetical order ...

When iterating over directories in order to find boot scripts do
this alphabetically to get a predictable order. This can be done
with glob() rather than readdir().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: fix multiple boot sources ...

When there are multiple bootsources barebox should try booting them
until one succeeds. This is broken because we bail out of the iteration
loop with a goto. Remove the goto to fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: Add generated files to clean rule ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: i.MX53: tqma53: Readd barebox specifics ...

Some of the barebox specific changes that were added in commit
e0316b4 got lost during the switch to use
upstream dtsi files in commit bb7cf71.

Especially the memory size is important since we have two different memory
sizes which have to be handled.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix the options and protocols used by the loadx command. ...

From 3cd9702 Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Thu, 8 May 2014 13:27:11 -0700
Subject: [PATCH] Fix the options and protocols used by the loadx command.

It seems like the loadx command was improperly copy/pasted from the loady
implementation, and was trying to load files using the ymodem protocol. This
patch should fix the command so that it uses xmodem, implements the -t option
and outputs the correct baudrate being used.

Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: i.MX IPUv3: Print error as string ...

And add a missing newline.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>