Merge branch 'for-next/console'

Merge branch 'for-next/bootm'

Merge branch 'for-next/arm'

Release v2018.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: arria10: enable errata 794072 and 845369 ...

Enable workarounds for two of the errata the CPU is affected
with.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6qp: fix NoC QoS passthrough for new cpu type functions. ...

On i.MX6QP/DP cpu_mx6_is_mx6q/d do not return true anymore.
Use the new cpu_mx6_is_mx6qp/dp to reenable NoC regulator bypass.

Fixes: d4c05d29d484 ("ARM: i.MX6: Add cpu type for 'plus' variants")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console_simple: add newline conversion for putc_ll case ...

When console_putc uses putc_ll for early printing then it must
do a newline conversion as putc_ll doesn't do it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console_simple: Fix newline conversion ...

Newline should be "\r\n" rather than "\n\r"

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console_simple: Remove duplicated newline conversion ...

console_puts uses console_putc for printing which already does newline
conversion, so do not do it again in console_puts.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: remove duplicate newline conversion ...

When the console is not yet fully initialized then console_puts falls
back to print characters using console_putc. console_putc already
does newline conversion, so do not repeat it in console_puts.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: add missing newline conversion for putc_ll ...

putc_ll doesn't do newline conversion (and it shouldn't do, as it's
a static inline function for early debugging, adding more code there
is not nice), so add newline conversion to the console code when
it uses putc_ll for printing early messages.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: Fix console_get_first_active() ...

Fix if condition in console_get_first_active() to actually check that
both bit are set.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: bootm: add ELF handler ...

With this handler barebox will be able to start linux kernel as
is, without additional image conversion.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add basic ELF parser ...

This parser is needed for kernel boot support on MIPS
and can potentially reused on other platforms.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mmu: psci: Make use of get_ttbr() ...

Introduce a simple inline function to get TTBR and use it in mmu.c and
sm.c

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: psci: Make use of set_ttbr() in armv7_secure_monitor_install() ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: psci: Remove unused code in psci_entry() ...

Remove what looks like a leftover code that doesn't appear to be
referenced anywhere.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: add ELF type ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Split bootm_load_devicetree into two functions ...

It is not always desired to get the devicetree from image data and load
it to a SDRAM region at the same time. Sometimes it's enough to just
load it to an allocated address (in case the user has no constraints
where the devicetree should be placed.

This patch splits bootm_load_devicetree into bootm_get_devicetree which
returns a pointer to the allocated devicetree and bootm_load_devicetree
which loads the devicetree to a specified region.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Drop data->oftree ...

It's no longer necessary to store the devicetree pointer in struct
image_data, it can be replaced with a local variable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ppc: bootm: Drop usage of data->oftree ...

The ppc bootm code uses data->oftree to store its private data pointers.
Drop this and use a local variable instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ppc: bootm: remove unnecessary parameter ...

bootm_relocate_fdt takes the os address as parameter, but this can be
extracted from struct image_data, so drop the parameter.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ppc: bootm: rename variables ...

In bootm_relocate_fdt 'addr' is used for two different purposes, once for the
os address and once for the new fdt. Make the code more readable by
using two variables describing their meaning, 'os' and 'newfdt'.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: bootm: drop usage of data->oftree ...

data->oftree can be replaced with a variable local to the arm code, so
drop usage of data->oftree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: VFxxx: Record cpu boot source as a part of startup ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: use https for Pengutronix services ...

Also adapt the links to git.pengutronix.de to use the cgit URLs instead the
old gitweb ones.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: esdctl: Add support for i.MX6SoloX's memory controller ...

Add code needed to dynamically detect the offset and amount of RAM.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/of-bootsource'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'