LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2011-11-25	52ef4af Browse files » crypto: Add crc7 function ... This function in used by the MCI over SPI driver. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 24 Nov 2011 Sascha Hauer committed on 25 Nov 2011
2011-11-22	7bb009c Browse files » commands/cp: add verbose mode which displays progress bar ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 22 Nov 2011 Sascha Hauer committed on 22 Nov 2011
2011-11-22	a59471d Browse files » sandbox: move ELFCLASS detection to asm/elf.h ... now we can detect the host build from gcc macro and cross compile the sandbox Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Loïc Minier <loic.minier@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Oct 2011 Sascha Hauer committed on 22 Nov 2011
2011-11-17	77e8188 Browse files » Mini2440: Everything's now present to provide USB host feature ... The S3C2440 CPU comes with an internal OHCI the generic part of Barebox already supports. Just add the missing part. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Nov 2011 Sascha Hauer committed on 17 Nov 2011
2011-11-11	e3920f1 Browse files » Merge branch 'pu/mci/multiblock-write' into next Sascha Hauer committed on 11 Nov 2011
	1153205 Browse files » ARM i.MX53: enable l2 cache ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Nov 2011
	50a6249 Browse files » mci: remove unnecessary loops ... We used to loop around the sectors in mci_sd_write/mci_sd_read. Now that we have multi block read and write this is not necessary anymore. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Nov 2011
	a2ca100 Browse files » mci: implement multi block write ... This speeds up writes to MMC/SD cards significantly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 11 Nov 2011
	b2e9356 Browse files » omap: Unify run_shell() in xload configuration ... Currently, there are multiple definitions of run_shell() for each board that can be build in "xload" configuration. Now there is only one function used by all boards. The functions defined in xload.c are used only when "xload" configuration used; but it gets compiled unconditionally. This has been fixed as well. Signed-off-by: Sanjeev Premi <premi@ti.com> Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sanjeev Premi authored on 12 Oct 2011 Sascha Hauer committed on 11 Nov 2011
2011-11-09	6756cd2 Browse files » fs: read: do not call read op when count is 0 ... Some ops do not handle read with count = 0 correctly. They do not have to if this is catched in the upper layer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Nov 2011
2011-11-09	d471e85 Browse files » Merge branch 'pu-mx53-l2' into next Sascha Hauer committed on 9 Nov 2011
2011-11-08	03f18f3 Browse files » mtd nand omap: use NAND_OWN_BUFFERS option ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	624a44a Browse files » mtd nand omap: add read function for the OMAP4 romcode ecc mode ... The OMAP4 romcode expects some unusual ecc layout which we could write but not read. This patch adds a function which uses the manual mode to read a page written with this ecc layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	ecbc8a3 Browse files » mtd nand omap: factor out an internal __omap_calculate_ecc function ... We can't use the ECC_RESULTx_0 register set for manual mode which we'll need in the next patch. So factor out an internal function which makes the register set to use configurable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	01bedb6 Browse files » mtd nand omap: make debugging output more useful ... - add missing '\n' at line ends - fix wrong argument type warnings - remove too noisy debug in omap_hwcontrol - add function names to debug printfs - add 0x prefixes to hex values Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	5b959a3 Browse files » mtd nand omap: use register defines for ecc registers ... We need this register bits later in another function, so use register bit defines now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	02fa86e Browse files » mtd nand omap: fail on bch decode failure ... The driver used to print an error when bch decoing failed, but did not actually throw an error. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	4cb1b12 Browse files » mtd nand omap: call ecc calculate function outside omap_correct_bch ... Move omap_calculate_ecc outside omap_correct_bch. When implementing the romcode bch read page we have to call omap_calculate_ecc with different arguments than in the standard case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	af01926 Browse files » mtd nand omap: factor out hamming correct function ... To be consistent also factor out the hamming correct function and also safe an indention level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	1b79fee Browse files » mtd nand omap: factor out bch correct function ... We need the bch correct algorithm in the next patches, so factor out a seperate function for this and also safe an indention level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
	4a0a5df Browse files » mtd nand omap: use blocknum calculation to where it's used ... Just some refactoring to make the next patches better readable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2011
2011-11-02	7c5f706 Browse files » ARM i.MX53: enable l2 cache ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Nov 2011
2011-10-23	6b8503b Browse files » Merge branch 'master' into next Sascha Hauer committed on 23 Oct 2011
	9a5898e Browse files » sandbox: simplify linker script ... let the linker to provide the basic linker script just insert the commands and initcalls before the .rodata section Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 23 Oct 2011 Sascha Hauer committed on 23 Oct 2011
	15f8765 Browse files » sandbox: remove duplicate barebox.lds.S ... today we have the same linker script in board and lib and only the board linker script is used Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 23 Oct 2011 Sascha Hauer committed on 23 Oct 2011
	e3e71f5 Browse files » sandbox: move __SANDBOX__ to Makefile ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 23 Oct 2011 Sascha Hauer committed on 23 Oct 2011
2011-10-19	dac6e90 Browse files » fix bug introduced with fixing path_check_prereq() ... This fixes a bug introduced with: commit `74c3632` Author: Antony Pavlov <antonynpavlov@gmail.com> Date: Tue Oct 18 13:48:44 2011 +0400 fs: fix path_check_prereq() This patch makes impossible the situations than path_check_prereq() can make 'return 0' without changing errno. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> path_check_prereq is supposed to return 0 when a file does not exist and S_UB_DOES_NOT_EXIST is given. stat() changes errno, so we have to set errno back to 0 before returning. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Oct 2011
	81fae63 Browse files » oftree: add fixup for memory nodes ... Thanks to a common memory handling barebox knows the sdram banks and sizes, so we can add a common fixup functions for the nodes in the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Oct 2011
	ed8e58d Browse files » ARM Linux: Add device tree support ... If the user has parsed a tree, we start Linux using the device tree, otherwise we use the traditional ATAG mechanism. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Oct 2011
	c0f9d1b Browse files » initial oftree command support ... This adds basic device tree command support. So far we can parse a flat device tree (-p), which also stores the tree in memory, dump it (-d) and free (-f) the internally stored tree. The chosen node can be updated with barebox bootargs, no other device tree manipulation is implemented yet. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Oct 2011